Commit graph

7726 commits

Author SHA1 Message Date
Jouni Malinen
f931374f30 IKEv2: Use a bit clearer payload header validation step
It looks like the "pos + plen > end" case was not clear enough for a
static analyzer to figure out that plen was being verified to not go
beyond the buffer. (CID 72687)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 16:37:16 +02:00
Jouni Malinen
f5f3728a81 WNM: Print debug message if Action frame sending fails
This makes wpa_drv_send_action() return value checking more consistent
(CID 75390).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 16:13:50 +02:00
Jouni Malinen
986ed3a9ca tests: NEIGHBOR_REP_REQUEST failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 21:49:45 +02:00
Andrei Otcheretianski
70d1e72849 wpa_supplicant: Handle link measurement requests
Send link measurement response when a request is received. Advertise
only RCPI, computing it from the RSSI of the request. The TX power field
is left to be filled by the driver. All other fields are not published.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:45:07 +02:00
Andrei Otcheretianski
7dc0338806 nl80211: Register Link Measurement Request Action frame
Add link measurement request to registration of Action frames to be
handled by wpa_supplicant if the driver supports TX power value
insertation.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-22 21:38:30 +02:00
Assaf Krauss
66d2143435 wpa_cli: Add optional ssid to neighbor report request
Add optional 'ssid' parameter to command "neighbor_rep_request".

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:37:49 +02:00
Assaf Krauss
4c4b230527 wpa_supplicant: Add an option to specify SSID in neighbor report requests
Allow supplying an SSID for the SSID IE. If not supplied, no SSID IE is
sent, and the request implies the current SSID.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:36:42 +02:00
Assaf Krauss
fad14af93a wpa_cli: Add neighbor_rep_request command
Add neighbor_rep_request command to send a Neighbor Report Request
to the associated AP.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:29:41 +02:00
Assaf Krauss
f4b8bfae15 wpa_supplicant: Add NEIGHBOR_REP_REQUEST command to the control interface
Add NEIGHBOR_REP_REQUEST command to the wpa_supplicant ctrl_iface.
This command triggers the sending of a Neighbor Report Request to the
associated AP.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:28:52 +02:00
Assaf Krauss
d89c0701db wpa_supplicant: Add support for Neighbor Report
Add the ability to send a Neighbor Report Request (part of
RRM). Requester is then notified once the report arrives.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:23:14 +02:00
Assaf Krauss
2526ccd95a nl80211: Register Neighbor Report Response Action frame
Add Neighbor Report Response Action frame to registration of Action
frames to be handled by wpa_supplicant.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:16:25 +02:00
Assaf Krauss
b361d580ec SME: Add RRM support to association request
In case the AP we are associating with advertises support for RRM,
advertise our own RRM support in the (Re)Association Request frame. This
is done by adding an RRM Capabilities IE. The underlying driver is
expected to further add a Power Capabilities IE to the request, and set
the Radio Measurement flag in the Capability Info field. At this point
the RRM Capabilities IE advertises no measurement support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:13:45 +02:00
Assaf Krauss
f936b73c4f wpa_supplicant: Store driver's RRM capabilities
Store the RRM capability flags reported by the underlying driver.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:07:56 +02:00
Assaf Krauss
58162adf06 nl80211: Populate RRM flags in nl80211 driver
Set the RRM capability flags, based on the capabilities reported
by the underlying driver.

In addition, upon connection, notify the underlying driver regarding
RRM support.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:06:32 +02:00
Assaf Krauss
0dc957b93d driver: Add RRM-related definitions to driver interface
Add definitions for RRM (Radio Resource Measurement) support:
1. Flags that specify the RRM capabilities of the underlying driver
2. Flag for RRM in Capability Info field in Management frames
3. Indication in association parameters regarding an RRM connection

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
2014-11-22 21:05:55 +02:00
Jouni Malinen
13f8d51e2d tests: BSS Transition Management
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
75d65857d5 WNM: Use recent scan results on BSS transition request
If the last scans are recent (for now, less than ten seconds old), use
them instead of triggering a new scan when a BSS Transition Management
Request frame is received. As a fallback, allow a new scan to be
triggered if no matches were found.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
e1117c1c01 WNM: Optimize BSS transition management scans
When the list of preferred transition candidates is received, use the
identified channels to optimize the following scan so that no time is
wasted on other channels.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
533630625d Add generic operating class and channel to frequency function
ieee80211_chan_to_freq() is a generic function that replaces and extends
the previous P2P-specific p2p_channel_to_freq(). The new function
supports both the global operating class table as well as the additional
US, EU, JP, and CN operating class tables.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
73360424d9 tests: Fix a typo in function name
except_ack() was supposed to be verifying that the frame was ACK'ed,
i.e., it was really supposed to be called expect_ack().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
ab4ee34306 tests: Fix wnm_bss_tm_req status code expectation
The implementation of WNM BSS transition management was extended to be
able to return a reject status code based on whether a matching entry is
found. The test case wnm_bss_tm_req was trying to enforce a different
status code to be used here based on old implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
d0b9ab69f6 WNM: Move transition candidate list processing to normal scan
This makes it easier to optimize transition request processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
279b5486a6 WNM: Fix TM candidate freeing if multiple requests are processed
The previously cached candidate list needs to be free properly through a
call to wnm_deallocate_memory() to ensure all subelements gets freed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
027454d2e9 WNM: Allow BSS transition request in same ESS even if RSSI is worse
This allows an AP to steer us to another BSS within the ESS even if that
results in reduced signal strength as long as the signal strength with
the target BSS is expected to provide some connectivity.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
6900b6d96f WNM: Mark wnm_scan_response() static
This function is not used outside wnm_sta.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
ff2c5758bb WNM: Order BSS transmission candidate entries based on preference
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
093226783d WNM: Simplify how candidate subelements are stored
There is no need to use a separately allocated data structures for this.
A bitfield indicating which information is present and variables within
struct neighbor_report are simpler to use and more efficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:37 +02:00
Jouni Malinen
8c9af762f3 WNM: Calculate valid-until time for transition candidate list
This is of more use than the raw validity interval (number of beacon
intervals) that was recorded previously.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:06:27 +02:00
Jouni Malinen
4c381f0d1c WNM: Convert BSSID Info into a u32
This is more convenient to use than u8 array.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 17:03:15 +02:00
Jouni Malinen
8040dc53c2 WNM: Debug print WNM BSS Transition Candidate List
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 16:34:34 +02:00
Jouni Malinen
5351480047 Add BSS-TM-RESP ctrl_iface event
This event allows external monitors to track STA response to BSS
Transition Management Request.

BSS-TM-RESP <STA addr> status_code=<#> bss_termination_delay=<#>
[target_bssid=<BSSID>]

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 16:34:34 +02:00
Jouni Malinen
a30dff07fb Add BSS_TM_REQ command to send BSS Transition Management Request
hostapd control interface can now be used to request transmission of a
BSS Transition Management Request frame to a specified station.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 16:34:34 +02:00
Jouni Malinen
64d04af5cc tests: Authenticator processing for various EAPOL-Key key info values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:49:25 +02:00
Jouni Malinen
a52fd1c338 tests: WPA EAPOL 4-way handshake protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:34:20 +02:00
Jouni Malinen
53b9bedb7a tests: WPA2 EAPOL-Key with incorrect type
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:16:41 +02:00
Jouni Malinen
37df6a87dd Add names for assigned QCA nl80211 vendor subcmds
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 21:46:01 +02:00
Jouni Malinen
821490f55f tests: Authenticator 4-way handshake protocol testing
This implements minimal RSN 4-way handshake Supplicant in Python and
uses that to test hostapd Authenticator implementation in various
possible protocol sequencies.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 20:50:41 +02:00
Jouni Malinen
f23c5b17e1 AP: Extend EAPOL-Key msg 1/4 retry workaround for changing SNonce
If the 4-way handshake ends up having to retransmit the EAPOL-Key
message 1/4 due to a timeout on waiting for the response, it is possible
for the Supplicant to change SNonce between the first and second
EAPOL-Key message 2/4. This is not really desirable due to extra
complexities it causes on the Authenticator side, but some deployed
stations are doing this.

This message sequence looks like this:
AP->STA: EAPOL-Key 1/4 (replay counter 1, ANonce)
AP->STA: EAPOL-Key 1/4 (replay counter 2, ANonce)
STA->AP: EAPOL-Key 2/4 (replay counter 1, SNonce 1)
AP->STA: EAPOL-Key 3/4 (replay counter 3, ANonce)
STA->AP: EAPOL-Key 2/4 (replay counter 2, SNonce 2)
followed by either:
STA->AP: EAPOL-Key 4/4 (replay counter 3 using PTK from SNonce 1)
or:
AP->STA: EAPOL-Key 3/4 (replay counter 4, ANonce)
STA->AP: EAPOL-Key 4/4 (replay counter 4, using PTK from SNonce 2)

Previously, Authenticator implementation was able to handle the cases
where SNonce 1 and SNonce 2 were identifical (i.e., Supplicant did not
update SNonce which is the wpa_supplicant behavior) and where PTK
derived using SNonce 2 was used in EAPOL-Key 4/4. However, the case of
using PTK from SNonce 1 was rejected ("WPA: received EAPOL-Key 4/4
Pairwise with unexpected replay counter" since EAPOL-Key 3/4 TX and
following second EAPOL-Key 2/4 invalidated the Replay Counter that was
used previously with the first SNonce).

This commit extends the AP/Authenticator workaround to keep both SNonce
values in memory if two EAPOL-Key 2/4 messages are received with
different SNonce values. The following EAPOL-Key 4/4 message is then
accepted whether the MIC has been calculated with the latest SNonce (the
previously existing behavior) or with the earlier SNonce (the new
extension). This makes 4-way handshake more robust with stations that
update SNonce for each transmitted EAPOL-Key 2/4 message in cases where
EAPOL-Key message 1/4 needs to be retransmitted.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 17:02:00 +02:00
Jouni Malinen
db099951cb Print EAPOL-Key Replay Counter in Authenticator debug log
This makes it easier to debug issues relared to EAPOL-Key
retransmissions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 15:35:19 +02:00
Jouni Malinen
066371ad52 Reserve QCA vendor specific nl80211 commands 53
These is reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-20 20:36:59 +02:00
Jason Mobarak
f54b926baa tests: Mesh HT mode
Change the mesh tests to check for the presence of HT in the scan
results.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-20 17:01:43 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00
Thomas Pedersen
9e5e03d77e Add examples of new mesh options into wpa_supplicant.conf
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-11-20 16:31:09 +02:00
Jouni Malinen
e503861f4d nl80211: Do not try to change STA capability on NL80211_CMD_SET_STATION
cfg80211 will reject any of these attributes regardless of whether the
values actually change or not when NL80211_CMD_SET_STATION is used for
something else than TDLS. This path is hit at least when setting up
mesh, so filter out the attributes from NL80211_CMD_SET_STATION to match
the rules in cfg80211.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-20 16:31:05 +02:00
Jouni Malinen
f6d1c5d9f8 tests: Fix regression in START line total count
The previous changes to enable stdin control broke the previous case of
showing the total number of test cases in the START lines. Fix that by
using a separate variable for the total number of test casess instead of
using length of the list of remaining test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 22:02:08 +02:00
Jouni Malinen
41aa4bd739 tests: WEP Shared Key index change without deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:57:49 +02:00
Jouni Malinen
168d4b097c tests: WEP with non-zero key index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:37:54 +02:00
Jouni Malinen
3e473674f7 tests: P2P_FIND continuing after GO Negotiation failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 16:59:11 +02:00
Rashmi Ramanna
9d11832090 P2P: Do not change P2P state on GO Neg failure if it is P2P_SEARCH
Changing the P2P state to P2P_IDLE on GO Negotiation Failure would stop
the previously issued P2P_FIND operation without notifying the upper
layers. Leave the search operation running if in P2P_SEARCH state to
avoid unexpected behavior in case the upper layers issued a new P2P_FIND
while waiting for GO Negotiation to complete.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 16:59:03 +02:00
Kyeyoon Park
47261405d7 AP: Add support for multicast-to-unicast conversion for DGAF Disable
When DGAF Disable is on, perform multicast-to-unicast for DHCP packets
and Router Advertisement packets. This is a requirement for Hotspot 2.0.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-11-19 16:47:06 +02:00