wpa_supplicant: Add support for Neighbor Report

Add the ability to send a Neighbor Report Request (part of
RRM). Requester is then notified once the report arrives.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
This commit is contained in:
Assaf Krauss 2014-11-05 03:42:50 -05:00 committed by Jouni Malinen
parent 2526ccd95a
commit d89c0701db
4 changed files with 208 additions and 0 deletions

View file

@ -340,6 +340,18 @@
#define WLAN_TDLS_PEER_TRAFFIC_RESPONSE 9
#define WLAN_TDLS_DISCOVERY_REQUEST 10
/* Radio Measurement Action codes */
#define WLAN_RRM_RADIO_MEASUREMENT_REQUEST 0
#define WLAN_RRM_RADIO_MEASUREMENT_REPORT 1
#define WLAN_RRM_LINK_MEASUREMENT_REQUEST 2
#define WLAN_RRM_LINK_MEASUREMENT_REPORT 3
#define WLAN_RRM_NEIGHBOR_REPORT_REQUEST 4
#define WLAN_RRM_NEIGHBOR_REPORT_RESPONSE 5
/* Radio Measurement capabilities (from RRM Capabilities IE) */
/* byte 1 (out of 5) */
#define WLAN_RRM_CAPS_NEIGHBOR_REPORT BIT(1)
/* Timeout Interval Type */
#define WLAN_TIMEOUT_REASSOC_DEADLINE 1
#define WLAN_TIMEOUT_KEY_LIFETIME 2

View file

@ -2866,6 +2866,12 @@ static void wpas_event_rx_mgmt_action(struct wpa_supplicant *wpa_s,
}
#endif /* CONFIG_INTERWORKING */
if (category == WLAN_ACTION_RADIO_MEASUREMENT &&
payload[0] == WLAN_RRM_NEIGHBOR_REPORT_RESPONSE) {
wpas_rrm_process_neighbor_rep(wpa_s, payload + 1, plen - 1);
return;
}
wpas_p2p_rx_action(wpa_s, mgmt->da, mgmt->sa, mgmt->bssid,
category, payload, plen, freq);
if (wpa_s->ifmsh)

View file

@ -4913,6 +4913,24 @@ int get_shared_radio_freqs(struct wpa_supplicant *wpa_s,
}
static void wpas_rrm_neighbor_rep_timeout_handler(void *data, void *user_ctx)
{
struct rrm_data *rrm = data;
if (!rrm->notify_neighbor_rep) {
wpa_printf(MSG_ERROR,
"RRM: Unexpected neighbor report timeout");
return;
}
wpa_printf(MSG_DEBUG, "RRM: Notifying neighbor report - NONE");
rrm->notify_neighbor_rep(rrm->neighbor_rep_cb_ctx, NULL);
rrm->notify_neighbor_rep = NULL;
rrm->neighbor_rep_cb_ctx = NULL;
}
/*
* wpas_rrm_reset - Clear and reset all RRM data in wpa_supplicant
* @wpa_s: Pointer to wpa_supplicant
@ -4920,4 +4938,153 @@ int get_shared_radio_freqs(struct wpa_supplicant *wpa_s,
void wpas_rrm_reset(struct wpa_supplicant *wpa_s)
{
wpa_s->rrm.rrm_used = 0;
eloop_cancel_timeout(wpas_rrm_neighbor_rep_timeout_handler, &wpa_s->rrm,
NULL);
if (wpa_s->rrm.notify_neighbor_rep)
wpas_rrm_neighbor_rep_timeout_handler(&wpa_s->rrm, NULL);
wpa_s->rrm.next_neighbor_rep_token = 1;
}
/*
* wpas_rrm_process_neighbor_rep - Handle incoming neighbor report
* @wpa_s: Pointer to wpa_supplicant
* @report: Neighbor report buffer, prefixed by a 1-byte dialog token
* @report_len: Length of neighbor report buffer
*/
void wpas_rrm_process_neighbor_rep(struct wpa_supplicant *wpa_s,
const u8 *report, size_t report_len)
{
struct wpabuf *neighbor_rep;
wpa_hexdump(MSG_DEBUG, "RRM: New Neighbor Report", report, report_len);
if (report_len < 1)
return;
if (report[0] != wpa_s->rrm.next_neighbor_rep_token - 1) {
wpa_printf(MSG_DEBUG,
"RRM: Discarding neighbor report with token %d (expected %d)",
report[0], wpa_s->rrm.next_neighbor_rep_token - 1);
return;
}
eloop_cancel_timeout(wpas_rrm_neighbor_rep_timeout_handler, &wpa_s->rrm,
NULL);
if (!wpa_s->rrm.notify_neighbor_rep) {
wpa_printf(MSG_ERROR, "RRM: Unexpected neighbor report");
return;
}
/* skipping the first byte, which is only an id (dialog token) */
neighbor_rep = wpabuf_alloc(report_len - 1);
if (neighbor_rep == NULL)
return;
wpabuf_put_data(neighbor_rep, report + 1, report_len - 1);
wpa_printf(MSG_DEBUG, "RRM: Notifying neighbor report (token = %d)",
report[0]);
wpa_s->rrm.notify_neighbor_rep(wpa_s->rrm.neighbor_rep_cb_ctx,
neighbor_rep);
wpa_s->rrm.notify_neighbor_rep = NULL;
wpa_s->rrm.neighbor_rep_cb_ctx = NULL;
}
/**
* wpas_rrm_send_neighbor_rep_request - Request a neighbor report from our AP
* @wpa_s: Pointer to wpa_supplicant
* @cb: Callback function to be called once the requested report arrives, or
* timed out after RRM_NEIGHBOR_REPORT_TIMEOUT seconds.
* In the former case, 'neighbor_rep' is a newly allocated wpabuf, and it's
* the requester's responsibility to free it.
* In the latter case NULL will be sent in 'neighbor_rep'.
* @cb_ctx: Context value to send the callback function
* Returns: 0 in case of success, negative error code otherwise
*
* In case there is a previous request which has not been answered yet, the
* new request fails. The caller may retry after RRM_NEIGHBOR_REPORT_TIMEOUT.
* Request must contain a callback function.
* The Neighbor Report Request sent to the AP will specify the current SSID.
*/
int wpas_rrm_send_neighbor_rep_request(struct wpa_supplicant *wpa_s,
void (*cb)(void *ctx,
struct wpabuf *neighbor_rep),
void *cb_ctx)
{
struct wpabuf *buf;
const u8 *rrm_ie;
if (wpa_s->wpa_state != WPA_COMPLETED || wpa_s->current_ssid == NULL) {
wpa_printf(MSG_DEBUG, "RRM: No connection, no RRM.");
return -ENOTCONN;
}
if (!wpa_s->rrm.rrm_used) {
wpa_printf(MSG_DEBUG, "RRM: No RRM in current connection.");
return -EOPNOTSUPP;
}
rrm_ie = wpa_bss_get_ie(wpa_s->current_bss,
WLAN_EID_RRM_ENABLED_CAPABILITIES);
if (!rrm_ie || !(wpa_s->current_bss->caps & IEEE80211_CAP_RRM) ||
!(rrm_ie[2] & WLAN_RRM_CAPS_NEIGHBOR_REPORT)) {
wpa_printf(MSG_DEBUG,
"RRM: No network support for Neighbor Report.");
return -EOPNOTSUPP;
}
if (!cb) {
wpa_printf(MSG_DEBUG,
"RRM: Neighbor Report request must provide a callback.");
return -EINVAL;
}
/* Refuse if there's a live request */
if (wpa_s->rrm.notify_neighbor_rep) {
wpa_printf(MSG_DEBUG,
"RRM: Currently handling previous Neighbor Report.");
return -EBUSY;
}
/* 5 = action category + action code + dialog token + IE hdr */
buf = wpabuf_alloc(5 + wpa_s->current_ssid->ssid_len);
if (buf == NULL) {
wpa_printf(MSG_DEBUG,
"RRM: Failed to allocate Neighbor Report Request");
return -ENOMEM;
}
wpa_printf(MSG_DEBUG, "RRM: Neighbor report request (for %s), token=%d",
wpa_ssid_txt(wpa_s->current_ssid->ssid,
wpa_s->current_ssid->ssid_len),
wpa_s->rrm.next_neighbor_rep_token);
wpabuf_put_u8(buf, WLAN_ACTION_RADIO_MEASUREMENT);
wpabuf_put_u8(buf, WLAN_RRM_NEIGHBOR_REPORT_REQUEST);
wpabuf_put_u8(buf, wpa_s->rrm.next_neighbor_rep_token);
wpabuf_put_u8(buf, WLAN_EID_SSID);
wpabuf_put_u8(buf, wpa_s->current_ssid->ssid_len);
wpabuf_put_data(buf, wpa_s->current_ssid->ssid,
wpa_s->current_ssid->ssid_len);
wpa_s->rrm.next_neighbor_rep_token++;
if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
wpa_s->own_addr, wpa_s->bssid,
wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
wpa_printf(MSG_DEBUG,
"RRM: Failed to send Neighbor Report Request");
wpabuf_free(buf);
return -ECANCELED;
}
wpa_s->rrm.neighbor_rep_cb_ctx = cb_ctx;
wpa_s->rrm.notify_neighbor_rep = cb;
eloop_register_timeout(RRM_NEIGHBOR_REPORT_TIMEOUT, 0,
wpas_rrm_neighbor_rep_timeout_handler,
&wpa_s->rrm, NULL);
wpabuf_free(buf);
return 0;
}

View file

@ -378,12 +378,29 @@ struct wpa_used_freq_data {
unsigned int flags;
};
#define RRM_NEIGHBOR_REPORT_TIMEOUT 1 /* 1 second for AP to send a report */
/*
* struct rrm_data - Data used for managing RRM features
*/
struct rrm_data {
/* rrm_used - indication regarding the current connection */
unsigned int rrm_used:1;
/*
* notify_neighbor_rep - Callback for notifying report requester
*/
void (*notify_neighbor_rep)(void *ctx, struct wpabuf *neighbor_rep);
/*
* neighbor_rep_cb_ctx - Callback context
* Received in the callback registration, and sent to the callback
* function as a parameter.
*/
void *neighbor_rep_cb_ctx;
/* next_neighbor_rep_token - Next request's dialog token */
u8 next_neighbor_rep_token;
};
/**
@ -1006,6 +1023,12 @@ int wpas_update_random_addr_disassoc(struct wpa_supplicant *wpa_s);
void add_freq(int *freqs, int *num_freqs, int freq);
void wpas_rrm_reset(struct wpa_supplicant *wpa_s);
void wpas_rrm_process_neighbor_rep(struct wpa_supplicant *wpa_s,
const u8 *report, size_t report_len);
int wpas_rrm_send_neighbor_rep_request(struct wpa_supplicant *wpa_s,
void (*cb)(void *ctx,
struct wpabuf *neighbor_rep),
void *cb_ctx);
/**
* wpa_supplicant_ctrl_iface_ctrl_rsp_handle - Handle a control response