Commit graph

1074 commits

Author SHA1 Message Date
Jouni Malinen
0e02a557d3 tests: Make p2p_msg_invitation_req_to_go more robust
Wait for GO to start before sending invitation frames in the protocol
test. Without this, it was possible to hit the 5 second timeout on
management frame RX under load.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 21:22:31 +02:00
Jouni Malinen
4d7cc3961f tests: Make go_neg_with_bss_connected more robust
It was possible for this test case to fail due to PBC overlap that was
detected based on previous test case having used PBC. Make that false
positive less likely to happen by explicitly clearing the scan cache on
the devices.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 21:06:18 +02:00
Jouni Malinen
3c086180c1 tests: Make ap_wps_reg_config_tkip failure log more helpful
The "Not fully connected" report did not clearly identify what went
wrong, so make this more verbose in hope of being able to determine what
happened should this test case fail again.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 20:33:35 +02:00
Jouni Malinen
9ed53f5edf tests: Increase WPS connection timeout to make tests more robust
It was possible to hit the 10 second timeout in some test cases under
heavy load (e.g., with large number of VMs running tests in parallel).
These timeouts are not really indicating any real error, so make them
less likely to show up in reports by increasing the connection timeout
to 30 seconds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 20:30:07 +02:00
Johannes Berg
6bb9d861f9 tests: Ignore status responses without =
There are valid status (and possibly status-driver) responses
that don't have a name=value format, ignore those in the test
framework parser.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27 20:15:51 +02:00
Jouni Malinen
9363f5e065 tests: Optimize run-tests.py --prefill-tests startup time
It took significant part of the startup latency to prefill the database
with test cases due to the SQL COMMIT operation between each added row.
Move COMMIT to outside the loop to speed startup significantly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 20:08:15 +02:00
Jouni Malinen
499c5e9dc6 tests: Follow test sequence from run-tests.py command line
It can be useful to specify an exact order of test cases and also to
allow the same test case to be run multiple times when the list of tests
is provided on the command line.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 19:48:41 +02:00
Johannes Berg
7ee6ec7aec tests: Create new radios for MCC tests
For tests that require a radio with multi-channel concurrency,
create a new one on the fly that does have more than 1 channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27 18:25:25 +02:00
Johannes Berg
788dc17f8c tests: Use tshark -Y instead of tshark -R
Newer versions of tshark don't like the -R (read filter) argument
for filtering and just show a deprecation warning. Use -Y (display
filter) instead, which hopefully also works on older versions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-27 18:24:26 +02:00
Jouni Malinen
1131a1c8d2 tests: Replace last remaining hwsim_test uses with DATA_TEST
External tool is not needed anymore to run the data connectivity tests
since hostapd test mode now allows the possible bridge or VLAN interface
to be specified.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-27 14:09:07 +02:00
Jouni Malinen
5f7b07de91 tests: ProxyARP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-26 01:37:54 +02:00
Jouni Malinen
17ffdf3951 tests: Clear sae_groups to default value in forgotten cases
It was possible for some of the SAE test cases (e.g., ap_ft_sae) to fail
if they were run after the sae_groups test case that left the SAE group
configuration to a value that is not enabled by default. Fix this by
clearing sae_groups setting in the couple of test cases that were not
yet doing this.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-25 15:19:19 +02:00
Jouni Malinen
7c8f5ea6a0 tests: WPA2-PSK with RADIUS for passphrase
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-25 01:28:34 +02:00
Jouni Malinen
df4733dff9 tests: WNM BSS TM Req with non-global operating class table
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-24 10:58:33 +02:00
Jouni Malinen
986ed3a9ca tests: NEIGHBOR_REP_REQUEST failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 21:49:45 +02:00
Jouni Malinen
13f8d51e2d tests: BSS Transition Management
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 20:17:47 +02:00
Jouni Malinen
73360424d9 tests: Fix a typo in function name
except_ack() was supposed to be verifying that the frame was ACK'ed,
i.e., it was really supposed to be called expect_ack().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
ab4ee34306 tests: Fix wnm_bss_tm_req status code expectation
The implementation of WNM BSS transition management was extended to be
able to return a reject status code based on whether a matching entry is
found. The test case wnm_bss_tm_req was trying to enforce a different
status code to be used here based on old implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-22 18:40:03 +02:00
Jouni Malinen
64d04af5cc tests: Authenticator processing for various EAPOL-Key key info values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:49:25 +02:00
Jouni Malinen
a52fd1c338 tests: WPA EAPOL 4-way handshake protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:34:20 +02:00
Jouni Malinen
53b9bedb7a tests: WPA2 EAPOL-Key with incorrect type
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-22 00:16:41 +02:00
Jouni Malinen
821490f55f tests: Authenticator 4-way handshake protocol testing
This implements minimal RSN 4-way handshake Supplicant in Python and
uses that to test hostapd Authenticator implementation in various
possible protocol sequencies.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-21 20:50:41 +02:00
Jason Mobarak
f54b926baa tests: Mesh HT mode
Change the mesh tests to check for the presence of HT in the scan
results.

[original implementation by Chun-Yeow Yeoh <yeohchunyeow@gmail.com>]
[some fixes by Masashi Honma <masashi.honma@gmail.com>]
Signed-off-by: Ashok Nagarajan <ashok.dragon@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
2014-11-20 17:01:43 +02:00
Javier Lopez
68157c0674 tests: Add test_wpas_mesh test cases
This wpa_supplicant tests include basic tests for:

- Mesh scan
- Mesh group add/remove
- Mesh peer connected/disconnected
- Add/Set/Remove to test mesh mode network
- Open mesh connectivity test
- Secure mesh connectivity test
- no_auto_peer

Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
[no_auto_peer test by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Lopez <jlopex@gmail.com>
2014-11-20 16:31:12 +02:00
Jouni Malinen
f6d1c5d9f8 tests: Fix regression in START line total count
The previous changes to enable stdin control broke the previous case of
showing the total number of test cases in the START lines. Fix that by
using a separate variable for the total number of test casess instead of
using length of the list of remaining test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 22:02:08 +02:00
Jouni Malinen
41aa4bd739 tests: WEP Shared Key index change without deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:57:49 +02:00
Jouni Malinen
168d4b097c tests: WEP with non-zero key index
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 17:37:54 +02:00
Jouni Malinen
3e473674f7 tests: P2P_FIND continuing after GO Negotiation failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-19 16:59:11 +02:00
Jouni Malinen
077f13c3e1 tests: Move parallel-vm.py test control to the host
This allows all VMs to be used at the end of a test sequence by
assigning test cases to VMs based on which VM is available for a new
test case rather than splitting the full task at the beginning and
potentially getting stuck with the last VM running long test cases for
significantly longer than another VM that gets shorter duration tests
assigned to it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
0d7456e9fd tests: Add run-tests.py -i to control execution from stdin
The new -i command line argument can be used to control test case
execution from stdin to run-tests.py and vm-run.sh. This can be used,
e.g., to run multiple repeated test sequences in a virtual machine
without havign to restart the VM between each iteration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
cb8cb33e55 tests: Allow run-tests.py to be run from the vm directory
Some of the paths in run-tests.py are hardcoded and could not handle
tests/hwsim/vm as the working directory. Modify the design enough to
allow ../run-tests.py -L to be used from the vm directory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:53 +02:00
Jouni Malinen
5e3c0b02a7 tests: Make run-tests.py process test case selection arguments
This allows a list of matching test cases to be produced without having
to run the test cases. Previously, -L output included all defined test
cases regardless of what else was included on the command line.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-19 15:20:52 +02:00
Jouni Malinen
44ac019c96 tests: Report kernel panic clearly in parallel-vm.py
Previously, it was possible for a kernel panic to be missed since the
only sign of it in stdout was reduced number of passed test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 22:34:54 +02:00
Jouni Malinen
7e6942253c tests: Use a single timestamp in all vm-run.sh instances
This avoids possible mismatches in directory and log file timestamps if
the UNIX timestamp (seconds) changes during the startup sequence.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 22:24:18 +02:00
Eliad Peller
7613345814 tests: Add wpa_supplicant WMM-AC test
Add basic wpa_supplicant tests for WMM-AC TSPEC addition/deletion.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
2014-11-16 21:40:57 +02:00
Jouni Malinen
b652daca84 tests: Suite B
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
eec0cc8da2 tests: Clear ignore_old_scan_res setting
This parameter was used in some of the NFC test cases to make scanning
more robust in case of changing AP configuration. However, the parameter
was not cleared anywhere, so it could have been left in use for other
test cases as well. To get more consistent behavior, clear the value
back to its default between test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-15 12:56:02 +02:00
Jouni Malinen
9128f520c3 tests: PMF required with SHA1-based AKM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-14 20:56:43 +02:00
Jouni Malinen
2a6cce3842 tests: DFS with chanlist
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:56:44 +02:00
Ilan Peer
006a1c4d3b tests: Make vm-run.sh arguments non-positional
This was currently breaking parallel-run.*, as it was passing
--split num/num parameters (intended for rnu-tests.py)
to vm-run.sh which broke the --codecov and --timewrap options.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:55:23 +02:00
Ilan Peer
40c57fa88f tests: Update vm README
Update the code coverage documentation to also specify the
source base directory for the code coverage generation.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
6e04f41168 tests: Add usage() to run-all.sh
The -h or --help command line arguments can now be used to request usage
information for run-all.sh.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
5d60296ea7 tests: Add option to build before running all tests
Add an option --build to run-all.sh to build before starting to run all
the tests. In addition, add an option --codecov to extract the code
coverage data at the end of the run.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
a7fe868dae tests: Make run-all.sh arguments non-positional
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Jouni Malinen
96a6c4c098 tests: Concurrent station mode scan and p2p_find with P2P Device
This verifies that station mode interface SCAN command gets executed if
P2P Device instance is running p2p_find.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Jouni Malinen
70892f697f tests: P2P_STOP_FIND/P2P_FLUSH to ignore new results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Jouni Malinen
0ee41e866c tests: GO Negotiation and timeout while waiting for peer
grpform_cred_ready_timeout2 is similar to the grpform_cred_ready_timeout
test case with the difference being in initiating a P2P_FIND operation
during the wait.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-29 12:52:51 +02:00
Jouni Malinen
4fb26cee95 tests: Remove ap_ht40_csa and ap_ht40_csa3 workarounds
The issue in mac80211 was identified and proposed fix is now available,
so remove the workaround here and start reporting failures from
unexpected disconnection during CSA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 14:01:16 +02:00
Jouni Malinen
5e29a90079 tests: Scan result update changing last_scan_res and connect_work
This verifies that last_scan_res and connect work pointers to BSS
entries get updated when scan result update ends up removing or
reallocating a BSS entry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-28 00:43:58 +02:00
Jouni Malinen
1531402ee4 tests: WPS with ap_scan=2
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-27 20:19:45 +02:00
Jouni Malinen
72a8e30b96 tests: Allow GCMP to be added into ap_wps_mixed_cred network profile
This is needed in preparation for WPS AES being mapped to enabling both
CCMP and GCMP if the driver supports both ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-27 16:52:10 +02:00
Ilan Peer
3bfa5f10a9 tests: Add support for reading modules list from a file
The new run-tests.py argument "-l <file>" can now be used to specify the
test modules using a text file.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 23:27:26 +02:00
Ilan Peer
6492a9cada tests: Add usage() to build.sh
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 19:21:04 +02:00
Ilan Peer
2593aadb3b tests: Add an option to force copy config files
"./build.sh --force-config" can be used to force copying configuration
files before building. This will overwrite any changes in .config files.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 19:19:39 +02:00
Ilan Peer
102c2bf461 tests: Add an option to build with code coverage
"./build.sh --codecov" can now be used to request CONFIG_CODE_COVERAGE=y
to be added to hostapd and wpa_supplicant .config files.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-10-26 19:18:34 +02:00
Jouni Malinen
412d764727 tests: cfg80211 connect command for WEP connection
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 17:01:37 +02:00
Jouni Malinen
8619c33420 tests: External bridge control for hostapd interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 11:29:16 +02:00
Jouni Malinen
cded555f06 tests: hostapd rfkill
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 10:53:37 +02:00
Jouni Malinen
ac69c33297 tests: Print failure exeception if logger output goes to file
This makes it more convenient to determine failure reasons during test
case development and VM testing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 10:39:32 +02:00
Jouni Malinen
9d3d2dbdcb tests: IP address in STATUS
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 10:21:48 +02:00
Jouni Malinen
85b60adddd tests: Make ap_ht40_csa and ap_ht40_csa3 less likely to fail
It looks like cfg80211 can trigger disconnection even without disabling
HT, so the same issue may be hit with both of the channel switches in
these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 23:19:48 +03:00
Jouni Malinen
42a4ba2865 tests: Group formation wait for peer with driver increasing ROC duration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 21:46:39 +03:00
Jouni Malinen
99e5f0e616 tests: Channel switch with HT40
ap_ht40_csa and ap_ht40_csa3 seem to show a cfg80211/mac80211 issue
where a CSA from HT40+ to HT40- channel results in HT getting disabled
due to cfg80211_chandef_compatible() check on c1->width == c2->width
claiming that the new channel is not compatible. For now, comment out
the FAIL case for these known issues to avoid constant failure for cases
that are not wpa_supplicant/hostapd issues. Once the kernel side design
has been reviewed, these error cases can be enabled here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 12:09:02 +03:00
Jouni Malinen
d4792c0cb7 tests: Channel switch with VHT80
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:29:28 +03:00
Jouni Malinen
bd5a7691bf tests: Radar detection on HT40 channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 10:52:06 +03:00
Jouni Malinen
fbb79f94eb tests: Allow time for go_neg_pbc() GO Neg Resp to go out
It was possible for the not-pre-authorized GO Negotiation case to end up
starting new GO Negotiation before the GO Negotiation Response frame
with status=1 was transmitted. While this works for group formation, it
could reduce test coverage for the common case where that response is
received. At a small sleep to make it less likely for this unexpected
sequence to happen during testing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 16:33:25 +03:00
Johannes Berg
1e3c7e82b5 tests: Disable support_p2p_device by default
When loading the hwsim module, disable support_p2p_device by default.
This will also become the default in the kernel, but until then it
makes sure it's not turned on by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:52 +03:00
Johannes Berg
5a8d165cd8 tests: Use dynamic radio for P2P_DEVICE tests
Use dynamic radios for P2P_DEVICE tests to be able to test
support when the default in hwsim is to not support it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:45 +03:00
Jouni Malinen
9b2c227216 tests: Run run-tests.py as root from run-all.sh
This will be needed to be able to control dynamic mac80211_hwsim
operations like adding and removing a phy. In the past, it has been
possible to start the main programs as root and then use non-root
account for run-tests.py. However, there is already a large number of
cases within the test scripts where sudo is needed. Moving that
requirement to execution of run-tests.py allows those to be simplified
as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-22 10:50:57 +03:00
Jouni Malinen
81ea400d37 tests: P2P SD with GO
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
4181c3964d tests: BSS Load updates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:11 +03:00
Johannes Berg
8a5cc2fe38 tests: Introduce hwsim radio context manager
The new HWSimRadio context manager allows the following
syntax to create (and appropriately destroy) a new radio:

  with HWSimRadio([...]) as (radio_id, iface_name):
    [...]

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Johannes Berg
91d7a9a1c5 tests: Allow creating radio with p2p-device support
For testing P2P-Device support properly, allow dynamically
creating radios with support for it in hwsim.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Jouni Malinen
eb92d389a8 tests: Remove wlan5-related interfaces based on list
Instead of hardcoding reset_devs() to remove wlan5, remove all wlan*
interfaces renaming in the wpa_supplicant process to support the case of
dynamically added hwsim phy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
5f797376f2 tests: Make RELOG command use global control interface
This allows RELOG to be used even if a wpa_supplicant process does not
have any interfaces configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
ce9c8c4097 tests: Use internal DATA_TEST_* functionality instead of hwsim_test
This replaces use of the external hwsim_test tool for most data
connectivity test cases. Only the cases where a special interface
(bridge/VLAN) is used are still executed through hwsim_test.

The internal DATA_TEST_* functionality makes it easier to extend the
connectivity test cases through an external device with real WLAN
hardware instead of the hwsim test setup. In addition, the error reports
from this code can be made more informative.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Luciano Coelho
5d7746b589 tests: Add test cases for AP channel switch announcement
Signed-hostap: Luciano Coelho <luciano.coelho@intel.com>

Skip CSA tests if the driver doesn't support this in AP mode.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 16:04:31 +03:00
Jouni Malinen
71c41d45af tests: Provide more details of parallel testing with curses UI
This extends parallel-vm.py to show more details about testing progress
from each VM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 11:19:49 +03:00
Jouni Malinen
9c2d2378ba tests: P2P re-invocation with p2p_add_cli_chan=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 17:00:57 +03:00
Toby Gray
fd1776536b tests: Removing a P2P group via the group control interface
This adds a test which attempts to use the control interface for the
P2P group to remove the P2P group.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-18 16:22:25 +03:00
Jouni Malinen
19d3a6e364 tests: SAE PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:03:17 +03:00
Jouni Malinen
414236b5db tests: RADIUS accounting with PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 10:20:07 +03:00
Jouni Malinen
a87e123a96 tests: Add Python-version of parallel-vm.sh
This is a more advanced version of the simple parallel-vm.sh script.
Status of each VM is printed out during the test and results are
provided in more convenient format in the end.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 21:49:36 +03:00
Jouni Malinen
3f08d1cde8 tests: WPS PBC triggered based on hostapd event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:58:04 +03:00
Jouni Malinen
6503deb9ac tests: Wi-Fi Display element updates and P2P-DEVICE-FOUND
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:46:24 +03:00
Jouni Malinen
0a5787162a tests: Make ap_hs20_fetch_osu more robust under heavy load
Use scan_for_bss() instead of scan() to avoid errors if the active scan
fails, e.g., due to heavy load under parallel-vm.sh test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 12:38:18 +03:00
Jouni Malinen
89f20842f6 tests: OpenSSL cipherlist configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:59:04 +03:00
Jouni Malinen
b43ac5d5ab tests: P2P group formation with WSC_Done missing
This verifies that GO is able to complete group formation even if the
P2P Client does not send WSC_Done message (or that message is dropped
for any reason) in case the P2P Client completes 4-way handshake
successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
cf0b9c86c5 tests: 4-way exchange using external EAPOL I/O
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
64502039c0 tests: Make ap_hs20_session_info more robust
It looks like mac80211 scan-while-associated can now take over 10
seconds with the current wireless-regdb rules for world roaming due to
number of additional DFS channel having been enabled for passive
scanning. This resulted in ap_hs20_session_info failing due to the wait
for the scan result event timing out. That is not really a real failure,
so increase the timeout to avoid reporting this incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 00:37:07 +03:00
Jouni Malinen
74ed673f33 tests: VHT 80+80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 14:27:23 +03:00
Jouni Malinen
bc86d8c158 tests: Fix DFS radar-during-CAC test case
This uses mac80211_hwsim dfs_simulate_radar to get the real kernel side
CAC operation executed and aborted due to radar detection. This allows
another channel to be selected properly through another CAC run.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 02:10:34 +03:00
Jouni Malinen
831cb7af96 tests: Extend DFS testing to include channel switch
Simulate a radar detection event to verify that hostapd switches
channels properly and the station follows the AP to the new channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 01:23:21 +03:00
Jouni Malinen
c634d320ef tests: Re-enable DFS connection check
It looks like association with DFS works fine with the current kernel
version, so re-enable this part of the DFS test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:27:12 +03:00
Jouni Malinen
6259fd814b tests: VHT with 160 MHz channel width
Since this requires a recent CRDA version and updated wireless-regdb, do
not report failures yet (i.e., indicate that the test case was skipped
if AP startup fails).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:18:39 +03:00
Jouni Malinen
b9dee18ffe tests: VENDOR_ELEM_REMOVE of the second IE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 00:43:50 +03:00
Jouni Malinen
5b7aeddcd7 tests: OKC with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
35a7646bb1 tests: PMKSA cache with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
2cde175a93 tests: PMKSA cache entry timeout based on Session-Timeout
This verifies that hostapd uses Session-Timeout value from Access-Accept
as the lifetime for the PMKSA cache entries and expires entries both
while the station is disconnected and during an association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
8e1fc78e1f tests: PMKSA caching disabled on AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
393869c551 tests: External MAC address change
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:41:33 +03:00
Jouni Malinen
c4a8c173b8 Revert "tests: Skip ap_wpa2_tdls_concurrent_init on failure"
This reverts commit bf700cc3d2. The
concurrent initialization test case is now expected to work again with
the STA entry added early enough to avoid the recently added mac80211
validation step failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:53:38 +03:00
Arik Nemtsov
77835ae9dd tests: Verify TDLS responder teardown in encrypted network
Older mac80211 implementations did not set the link identifier
appropriately, resulting in an incorrect teardown packet being sent the
peer. wpa_supplicant adds the FTE containing the MIC field calculated
using the correct link-identifier. This causes a MIC failure on the
other side and the teardown is discarded. Verify this case is fixed by
newer kernel and wpa_supplicant code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:53:31 +03:00
Jouni Malinen
b5db69197a tests: Random MAC addresses while maintaining OUI
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-30 00:40:23 +03:00
Jouni Malinen
c1d1b6998d tests: Update server and user certificates
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-30 00:40:23 +03:00
Jouni Malinen
d1fc5736cc tests: FDB entry addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-29 14:03:15 +03:00
Jouni Malinen
7c33a65671 tests: P2P_PROV_DISC auto
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:56:06 +03:00
Jouni Malinen
746327ca86 tests: P2P service discovery no protocol/match cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:44:24 +03:00
Jouni Malinen
06f94fd0e1 tests: Increase P2P persistent group with per-STA PSK coverage
Remove and re-start the persistent group manually to increase test
coverage to include the case of re-configuring the PSK list entries from
a stored persistent group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:09:53 +03:00
Jouni Malinen
4a7d73d161 tests: Make ap_hs20_random_mac_addr more robust
If the previuous test case used a non-RSN AP and that was left in
cfg80211 scan results, it was possible for ap_hs20_random_mac_addr to
pick that old AP from the previous test and reject to connect through
Hotspot 2.0 mechanisms. Work around this test issue by requesting new
set of scan result at the beginning of the test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 17:51:09 +03:00
Jouni Malinen
e5a79e3f93 tests: WPS while connected
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 11:03:48 +03:00
Jouni Malinen
816e3df972 tests: Random MAC address use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:55 +03:00
Jouni Malinen
321c7f6034 tests: Make ap_wps_er_add_enrollee more robust under load
The scan for WPS-AUTH validation may miss a Probe Response frame if the
hostapd process gets blocked under load, e.g., when testing with
parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:17:17 +03:00
Jouni Malinen
377babb205 tests: Fix autogo_bridge to clear autoscan setting
Previously, periodic autoscan could have been left running and that
could result in the following test cases failing in some cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
852cb016d2 tests: Make ap_hs20 test cases more robust
Some of the test cases where using INTERWORKING_SELECT internally
without using scan_for_bss like the helper functions did. Add explicit
scan_for_bss calls to make the test cases less likely to fail due to
missing BSSes in scan results. This could cause false failure reports
when runnign under heavy load with parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
bbf20ca265 tests: Use TYPE=ONLY scan for scan_for_bss
This avoids unexpected connection attempts in cases a matching network
is enabled and there is no existing connection (e.g., when testing with
ENABLE_NETWORK no-connect option).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
bf700cc3d2 tests: Skip ap_wpa2_tdls_concurrent_init on failure
A mac80211 TDLS validation change ended up breaking test functionality
that was needed for this test case. Instead of reporting this known
issue as a FAIL every time, mark the test as SKIP since the issues is
known and there are no plans of "fixing" it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 11:30:56 +03:00
Jouni Malinen
36e7fbce34 tests: PMKSA_FLUSH
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 10:50:19 +03:00
Jouni Malinen
a567aae4a1 tests: Roaming policy change with the bssid parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
d885a0ba7c tests: P2P GO netdev in a bridge
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:27:27 +03:00
Jouni Malinen
a0fd2ae643 tests: WPS mixed-WPA/WPA2 credential merging
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-29 20:25:18 +03:00
Jouni Malinen
d6df0d7e62 tests: Verify that sec_dev_type gets reported for P2P peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-27 16:22:53 +03:00
Jouni Malinen
4b15c3f256 tests: P2P GO channel preference and regulatory rule mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 17:57:26 +03:00
Jouni Malinen
9a5cfd7007 tests: No EAP fast session resumption between network blocks
Verify that EAP fast session resumption is skipped if the connection
uses a different network configuration than the last EAP connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 20:23:08 +03:00
Jouni Malinen
1f41a20c92 tests: P2P vendor specific extensions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-08 15:57:30 +03:00
Jouni Malinen
f1a36a53a5 tests: update_identifier in network block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 15:51:20 +03:00
Jouni Malinen
8094a0077a tests: Fix wpas_ctrl_country to match the fixed event data
This test case for enforcing the incorrect init=DRIVER instead of
init=CORE for the event due to bug in the event message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 13:34:34 +03:00
Jouni Malinen
e8e571d7ce tests: SCAN scan_id
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 12:52:08 +03:00
Jouni Malinen
31424fa732 tests: P2P passphrase length configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-22 00:17:18 +03:00
Jouni Malinen
6c080dfab2 tests: EAP-SIM/AKA/AKA' protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 20:34:25 +03:00
Jouni Malinen
72cbc6847b tests: EAP-SIM external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 19:43:11 +03:00
Jouni Malinen
d8e02214ea tests: EAP-AKA external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 11:30:57 +03:00
Jouni Malinen
32747a3eee tests: EAP-SIM/AKA invalid Milenage key configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-20 10:59:08 +03:00
Jouni Malinen
e4719179cb tests: SA Query rate limiting on burst of unprotected Deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-19 20:59:46 +03:00
Jouni Malinen
e0534ecf90 tests: EAP-PSK protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-18 00:13:56 +03:00
Jouni Malinen
7eb33a8f99 tests: Make concurrent_grpform_while_connecting2 more robust
It was possible for this test case to fail due to PBC overlap that was
detected based on previous test case having used PBC. Make that false
positive less likely to happen by explicitly clearing the scan cache on
dev[1].

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-16 17:07:25 +03:00
Jouni Malinen
2eae05f780 tests: EAP protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 19:01:59 +03:00
Jouni Malinen
0954431621 tests: EAP-PAX protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 17:36:53 +03:00
Avraham Stern
62fbc0a784 tests: GO configured preferred channels are disallowed
Verify that when all configured preferred channels are disallowed,
the GO is instantiated on a random channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-15 00:46:15 +03:00
Avraham Stern
eb383fc48e tests: Autonomous GO random channel selection
Verify that a standalone GO selects a random channel from the social
channels in case no other preference is set.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
8d74469e61 tests: P2P GO negotiation when two peers force different freq
Verify that when trying to form a P2P group but each peer forces a
different frequency, the group formation fails.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
744a214bdb tests: Frequency set as no GO
Verify that when setting frequency as no_go_freq and setting up
autonomous GO, the GO is instantiated on a different frequency, but
when forming a P2P group and becoming a client this frequency can be
used.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
87e5dd0af1 tests: GO with preferred channel and station on a disallowed channel
Verify that when setting up autonomous GO with configured preferred
channel and a station interface is connected on a channel that is
disallowed for P2P, the GO is instantiated on the preferred channel.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
b1f0cd8b4c tests: Autonomous GO with preferred channel and station on another channel
Verify that when setting up an autonomous GO with configured preferred
channel and a station interface is on another channel, the GO is
instantiated on the same channel as the station interface and not on the
configured preferred channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:32 +03:00
Avraham Stern
72f659238c tests: GO negotiation with forced freq different than station interface
Verify that when a station interface is on one frequency, and GO
negotiation is started in which both sides force a different frequency,
the P2P group is formed on the forced frequency (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:09 +03:00
Haim Dreyfuss
031220832b tests: Autonomous GO force different channel than station interface
After station interface is connected on a specific channel, create
autonomous GO with forced different channel.

Requires MCC.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:08:54 +03:00
Avraham Stern
23aec8ffd6 tests: GO negotiation with station interface on a P2P-disallowed channel
Verify that when P2P group is formed and a station interface is
connected on a channel that is disallowed for P2P, the group is formed
on a different channel than the BSS (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:08:53 +03:00
Avraham Stern
4b47d977c5 tests: GO with station interface on a P2P-disallowed channel
Verify that when setting up an autonomous GO and station interface is
connected on a channel that is disallowed for P2P uses, the GO is
instantiated on a different channel than the station mode connection.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:05:17 +03:00
Avraham Stern
9c69efc144 tests: GO negotiation with station interface is connected
Verify that when station interface is connected and GO negotiation is
initiated, the P2P group is formed on the same channel as the station
connection.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:04:41 +03:00
Haim Dreyfuss
ef59926999 tests: Autonomous GO channel selection following BSS
This test verifies that if a GO is instantiated after a connection of a
station interface, the chosen operating channel is that of the station
interface.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:04:08 +03:00
Haim Dreyfuss
5fe7a42601 tests: Add wpasupplicant get_mcc helper function
The function returns the number of concurrent channels supported by the
driver.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:49:17 +03:00
Haim Dreyfuss
57d909eeff tests: Add channels argument to run-all.sh and start.sh
Add an option to run-all.sh and start.sh to get as an argument the
number of concurrent channels that mac80211_hwsim will be loaded with.
To start mac80211_hwsim with more than one channel, the following
parameter should be added to command line: channels=<num_channels>
The default is one channel (no concurrent channels).
The driver should be loaded with multi channel support in order to run
some tests.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:47:51 +03:00
Jouni Malinen
30d62b7a88 tests: EAP-EKE protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 17:27:12 +03:00
Jouni Malinen
e862968d18 tests: Validate parsing and rejection of invalid WFD subelement
This is a regression test for wifi_display_subelem_hex() bounds checking
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 15:29:48 +03:00
Jouni Malinen
6ec64f3ec8 tests: Truncated GAS query request
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 00:27:15 +03:00
Jouni Malinen
2e9f8ee723 tests: EAP-GPSK protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-12 01:00:56 +03:00
Jouni Malinen
d5c14b25fd tests: EAP-OTP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 21:23:54 +03:00
Jouni Malinen
43c5bc94f5 tests: cfg80211 offchannel TX vs. operating channel
This test case shows an example case where an uncancelled offchannel TX
frame command seems to end up getting following CMD_FRAME TX operations
transmitting on incorrect channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 11:48:02 +03:00
Jouni Malinen
8604a68eec tests: EAP-MD5 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 00:54:45 +03:00
Jouni Malinen
18fc8f40fd tests: EAP-LEAP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 00:46:38 +03:00
Jouni Malinen
d81731e681 tests: Framework for EAP peer protocol tests
This introduces a minimal RADIUS authentication server using pyrad to
allow simple EAP handler functions to be used for writing protocol tests
for EAP peer methods. This initial commit includes test cases for
EAP-SAKE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-09 00:30:44 +03:00
Jouni Malinen
a47f815ff3 tests: Extend RADIUS protocol testing coverage
Test RADIUS client behavior with various invalid Access-Accept messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-08 18:17:08 +03:00
Jouni Malinen
9a921f9a84 tests: Verify behavior on unexpected association event
This verifies association event processing in case the association was
not requested by wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 13:35:03 +03:00
Jouni Malinen
b246e2af79 tests: Non-ASCII EAP user identity
This is a regression test for printf_encode() bounds checking issues
that can now be caught under valgrind.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 17:36:51 +03:00
Jouni Malinen
a7fb2f2f4f tests: Run hostapd-AS under valgrind if requested
Previously, only hostapd-AP and wpa_supplicant processed were run under
valgrind when valgrind testing was enabled. Extend this to include
hostapd as authentication server.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 16:20:08 +03:00
Jouni Malinen
cf2f369818 tests: cfg80211 scan-for-auth workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-02 00:26:23 +03:00
Jouni Malinen
5186e0c450 tests: nl80211 connect command and AP disconnecting the STA
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 23:20:36 +03:00
Jouni Malinen
40bda3805d tests: nl80211 connect command and association reject event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 23:03:14 +03:00
Jouni Malinen
e6485ba764 tests: Remove CONFIG_DRIVER_TEST=y from example config
This was still present in hostapd example configuration even though the
test driver wrapper is not used anywhere in the hwsim testing and there
are no plans of using it either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 22:47:44 +03:00
Jouni Malinen
2d6ce4327a tests: rfkill test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 16:17:33 +03:00
Jouni Malinen
40602101de tests: FT roams multiple times
This extends testing coverage by running FT-over-air and FT-over-DS
tests for hundred roams.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 15:48:48 +03:00
Jouni Malinen
c6b6e10578 tests: FT and GTK rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 13:22:24 +03:00
Jouni Malinen
3b25ad4cd6 tests: GTK rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 11:59:23 +03:00
Jouni Malinen
6c87b4b84e tests: PTK rekey enforced by AP
These are similar to the existing test cases where PTK rekey was
triggered by the station, but here a timer on the AP is used as the
trigger.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 11:47:37 +03:00
Jouni Malinen
8f614cd7a7 tests: Initial mechanism for RADIUS protocol testing
This brings in a minimal pyrad-based RADIUS server to allow various
protocol tests to be run. For now, the server is not adding
Message-Authenticator, so that error case is checked. Additional tests
can be added in the future.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 00:52:03 +03:00
Jouni Malinen
8b5f1095ce tests: RADIUS interim accounting with unreachable server
This adds coverage for radius_client_list_del() loop that deletes
pending messages related to the specific STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 00:02:15 +03:00
Jouni Malinen
de93da914f tests: Verify double DISABLE on hostapd with multi-BSS configuration
This used to result in a segmentation fault due to use of freed memory
(mismatch in pointer lifetime between hostapd.c and driver_nl80211.c).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 17:16:33 +03:00
Jouni Malinen
bedb6ea54f tests: Verify auto_interworking=1 with partiall matching network
This is a regression test for an issue where scanning sequence could be
terminated if interworking_find_network_match() finds a matching
network, but wpa_s->auto_select is not set. This could stop connection
attempts when auto_interworking=1 is used and the scan results have a
partially matching network and no cred match.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 13:25:12 +03:00
Jouni Malinen
0aee8330bd tests: RADIUS server failover
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 12:43:37 +03:00
Jouni Malinen
6a188ba3fc tests: RADIUS server unreachable with error handling
radius_{auth,acct}_unreachable tested some parts of RADIUS client code
error handling. However, they did not test everything since the send()
calls for unreachable port on localhost did not return an error (that
error was reported on receive side). Extend this with similar test cases
using unreachable IP address to get send() error returns covered as
well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 18:34:39 +03:00
Jouni Malinen
e707f9aac7 tests: P2P Client inviting a device to join a group
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 16:59:51 +03:00
Jouni Malinen
95cf24abcd tests: More protocol testing coverage for P2P invitation messages
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 16:46:59 +03:00
Jouni Malinen
9e669cb5ff tests: Hide stdout from Popen() to avoid undesired stdout prints
ap_cipher_tkip_countermeasures_{ap,sta} printed out the MAC addresses in
stdout which resulted in the debug log not starting the PASS/FAIL
information at the beginning of the line. Hide these unnecessary prints
to avoid that.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:18 +03:00
Jouni Malinen
c50f0eac11 tests: P2P Invitation Response protocol tests
This verifies most of the error cases in Invitation Response processing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
2f3b5fff15 tests: Invitation request with mismatching channel requirements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
b1809dab7e tests: P2P invitation rejected from unknown peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
cdad30be2a tests: P2P invitation with Wi-Fi Display enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
350a7ba90f tests: HS 2.0 remediation required from SQL user DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-28 00:56:13 +03:00
Jouni Malinen
5e5818458f tests: Persistent group invitation while GO already running
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:01 +03:00
Jouni Malinen
84d746c8dd tests: P2P persistent group during concurrent operation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
2d68cfaaec tests: Persistent P2P group re-invocation without persistent reconnect
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
aa9735e772 tests: P2P and driver event to avoid frequencies
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:44 +03:00
Jouni Malinen
de8c4144fa tests: No pending query for GAS comeback
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
1d1de2306d tests: Limit on number of GAS pending dialog contexts
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
745f87715e tests: Verify SQLite DB as hostapd EAP user database
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
e044016422 tests: gitignore TNC library files
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-21 18:47:57 +03:00
Jouni Malinen
3ba5cb29af tests: Add -rdynamic to fix TNC IMV/IMC loading on some platforms
The example IMV and IMC used for TNC testing has references to
wpa_printf and other functions from hostapd/wpa_supplicant. Link the
binaries in a way that allows these symbols to be resolved while loading
the libraries at run time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-21 14:56:34 +03:00