jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

tests: SA Query rate limiting on burst of unprotected Deauth

Browse source 
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
This commit is contained in:
Jouni Malinen 2014-06-19 20:59:46 +03:00 committed by Jouni Malinen
parent 3302b7c29f
commit e4719179cb
1 changed files with 54 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

54
tests/hwsim/test_ap_pmf.py
View file

@ -213,6 +213,60 @@ def test_ap_pmf_sta_sa_query(dev, apdev):
if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) < 1:
raise Exception("AP did not reply to SA Query")
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
"""WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
ssid = "deauth-attack"
addr = dev[0].p2p_dev_addr()
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="use_monitor=1")
id = wpas.add_network()
wpas.set_network(id, "mode", "2")
wpas.set_network_quoted(id, "ssid", ssid)
wpas.set_network(id, "proto", "WPA2")
wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
wpas.set_network(id, "ieee80211w", "2")
wpas.set_network_quoted(id, "psk", "12345678")
wpas.set_network(id, "pairwise", "CCMP")
wpas.set_network(id, "group", "CCMP")
wpas.set_network(id, "frequency", "2412")
wpas.connect_network(id)
bssid = wpas.p2p_dev_addr()
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
for i in range(0, 10):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req < 1:
raise Exception("STA did not send SA Query")
if num_resp < 1:
raise Exception("AP did not reply to SA Query")
if num_req > 1:
raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)
time.sleep(10)
for i in range(0, 5):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req != 2 or num_resp != 2:
raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))
def test_ap_pmf_required_eap(dev, apdev):
"""WPA2-EAP AP with PMF required"""
ssid = "test-pmf-required-eap"