Commit graph

136 commits

Author SHA1 Message Date
Kiran Kumar Lokere
01542e6517 Add new WiFi test config attributes to configure BA params
Define a new WiFi test configuration attributes in QCA vendor
command to configure BA session parameters and to add or
delete a BA session and to configure no ack policy.
This is used for configuring the testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-03 00:12:39 +02:00
Kiran Kumar Lokere
ba60804419 Add new WiFi test config attribute to allow WEP/TKIP in HE
Define a new WiFi test configuration attribute in QCA vendor
command to allow or not to allow WEP/TKIP in HT/VHT/HE mode.
This is used for configuring the testbed device.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-03 00:09:19 +02:00
Vamsi Krishna
a4016163e8 Extend APF interface for read/write and enable/disable ops
Enhance QCA vendor specific APF interface to support write/read program
and/or data and to enable/disable APF feature.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-15 00:26:06 +02:00
Kiran Kumar Lokere
5ac4346426 Define new QCA vendor sub command for wifi test configuration
Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-07 12:11:47 +02:00
Guisen Yang
8678b14faa Add new QCA vendor commands for thermal shutdown
Add new QCA vendor commands and attributes to get thermal information
and send thermal shutdown related commands. Indicates the driver to
enter the power saving mode or resume from the power saving mode based
on the given temperature and thresholds.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:35:06 +02:00
Subhani Shaik
2cc2a0a7ea Extend QCA vendor NDP params to support schedule update indication
Add additional NDP attributes and NDP subcommand value which is
provided as part of schedule update indication from driver/firmware
to HAL.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-29 20:43:10 +02:00
Subhani Shaik
a7769f6da2 Update QCA vendor commands to match ASOP
This updates QCA vendor command and attribute definitions to match AOSP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-29 20:40:54 +02:00
Venkateswara Swamy Bandaru
b4cd8b7e1a Add QCA vendor command and attributes for MSDU queue depth threshold
This allow MSDU queue depth threshold in target to be set per peer per
TID. This command contains MAC address, TID, update mask, and threshold
values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-22 10:56:26 +02:00
Sunil Dutt
c103c0b516 Extend NUD Stats to collect the data packet statistics
This commit extends the existing QCA vendor specific NUD_STATS_GET/SET
interface to also collect the statistics of the data packets. The
intention here is to get more comprehensive information to detect the
network unreachability.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-12 23:07:15 +02:00
Sunil Dutt
9cc8303d32 Add QCA vendor command to get the WLAN MAC information
This commit introduces a QCA vendor command that provides the current
information of WLAN hardware MAC and its associated WLAN netdev
interfaces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-01-12 00:50:45 +02:00
Peng Xu
61536b5f41 Add new QCA vendor attribute for getting preferred channel
A new vendor attribute QCA_WLAN_VENDOR_ATTR_GET_WEIGHED_PCL is added for
getting preferred channels with weight value and a flag to indicate how
the channels should be used in P2P negotiation process.

Signed-off-by: Peng Xu <pxu@qti.qualcomm.com>
2017-12-22 20:34:51 +02:00
Jouni Malinen
1a2cb20d5b Fix couple of QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS comments
Copy-paste errors in the command name (set vs. the new get).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-22 18:57:47 +02:00
Sunil Dutt
2fca2d2144 Vendor parameter for forcing RSNE override
Indicates the driver to use the RSNE as-is from the connect interface.
Exclusively used for the scenarios where the device is used as a testbed
device with special functionality and not recommended for production.
This helps driver to not validate the RSNE passed from user space and
thus allow arbitrary IE data to be used for testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-22 18:43:55 +02:00
Jeff Johnson
2d942ec4ac Define a QCA vendor command to retrieve SAR Power limits
Previously commit c79238b6a4 ('Define a
QCA vendor command to configure SAR Power limits') implemented a vendor
command interface to allow a userspace entity to dynamically control the
SAR power limits. Now implement a command to retrieve the current SAR
power limits.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-15 20:55:15 +02:00
Paul Zhang
9b0de99fac Add new QCA vendor attribute for WLAN Latency Module (WLM)
A new vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_LATENCY_LEVEL is added
for vendor sub-command QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION.
This attribute is for setting the level of WLM.

Signed-off-by: Paul Zhang <paulz@qti.qualcomm.com>
2017-12-08 14:15:19 +02:00
Krishna Rao
364039d223 Add QCA vendor command and attributes for RROP
Add QCA vendor command and attributes for vendor specific Representative
RF Operating Parameter (RROP) information. This information is intended
for optional use by external ACS. It provides guidance values for some
RF parameters that are used by the system during operation, so that
external ACS can utilize these to compare between channels, bands, etc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-30 18:47:32 +02:00
Edayilliam Jayadev
af6614ca10 Fix block comment style in QCA vendor attribute definition
Fix the block comment style issue introduced as part of commit
fbfceef3af ("Add QCA vendor commands for
spectral scan").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:55:30 +02:00
tinlin
2115603a45 Add QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Add sub-command QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING to flush
pending packets in firmware. The attributes are listed in enum
qca_wlan_vendor_attr_flush_pending. The QCA_WLAN_VENDOR_ATTR_PEER_ADDR
specifies the peer MAC address and the QCA_WLAN_VENDOR_ATTR_AC specifies
the access category of the pending packets.

Signed-off-by: Lin Tingting <tinlin@qti.qualcomm.com>
2017-11-14 18:52:59 +02:00
Zhang Qian
27987b67fa Add new QCA vendor attribute for LL stats
A new vendor attribute QCA_WLAN_VENDOR_ATTR_LL_STATS_WMM_AC_PENDING_MSDU
is added for vendor sub-command QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET.
This attribute is for pending MSDUs corresponding to respective AC.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-14 18:48:55 +02:00
Edayilliam Jayadev
fbfceef3af Add QCA vendor commands for spectral scan
Add the following vendor commands and their vendor attributes for
spectral scan.

 1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
        Get current values of spectral parameters.
 2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
        Get stats for spectral scan debug.
 3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
        Get the spectral hardware capability.
 4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
        Get the current status of spectral scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-03 21:47:32 +02:00
Zhang Qian
962b8fcf49 Add new QCA vendor attributes for MAC counters
Add QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_REPORT_TIME
and QCA_WLAN_VENDOR_ATTR_LL_STATS_EXT_MEASUREMENT_TIME to record
timestamp and duration for the last MAC counters. Some user layer
application is delay sensitive. It needs to know time stamp and
measurment duration for the counters.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-11-03 21:21:55 +02:00
Vidyullatha Kanchanapally
cddfda7892 Add attributes to support roam+auth vendor event for FILS
Add additional attributes to specify the PMK, PMKID, and the ERP next
sequence number to the vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH. These are needed in case
of an offloaded FILS roaming.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 15:55:44 +03:00
Krishna Rao
ee522d27cf Vendor flags for 11ax channel property flags for use with external ACS
Add 802.11ax channel property flags for use with external ACS (QCA
vendor command). Use the remaining available bits in
qca_wlan_vendor_channel_prop_flags for the first few 11ax flags. Then
add qca_wlan_vendor_channel_prop_flags_2 as a continuation of
qca_wlan_vendor_channel_prop_flags and add the remaining 11ax flags
there. Note that qca_wlan_vendor_channel_prop_flags_ext is not used
since it is currently not intended for holding such information. Rather
it is meant for holding additional control information related to
features such as DFS, CSA, etc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 18:00:47 +03:00
Vamsi Krishna
d55b174609 FILS: Vendor attribute to disable driver FILS features
The FILS features on STA needs to be disabled for testing purposes to
verify the APUT behavior with non-FILS STAs. Add a QCA vendor attribute
for doing so.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-25 20:22:46 +03:00
Sunil Dutt
cf39475b40 Introduce QCA_NL80211_VENDOR_SUBCMD_HANG
This is an event indicating to the user space that the driver has
detected an internal failure. The driver is expected to recover from
such a failure automatically, e.g., by resetting the device. This event
carries the information indicating the reason that triggered this
detection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-23 11:32:07 +03:00
Sachin Ahuja
e77d13ef95 QCA vendor attribute to configure beacon miss penalize count for BTC
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-18 21:10:53 +03:00
Sachin Ahuja
7bd88aaf37 QCA vendor attribute to configure beacon miss count
This can be used to dynamically enable/disable beacon miss count.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-08-18 21:10:53 +03:00
Sandeep Puligilla
505554bbf7 QCA vendor attribute to enable/disable scan
This commit introduces QCA vendor attribute to
disable/enable scan.

Signed-off-by: Sandeep Puligilla <spuligil@qti.qualcomm.com>
2017-08-18 21:10:53 +03:00
vamsi krishna
46b15e470e Add vendor flags for OCE feature support indication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:11:35 +03:00
Sunil Dutt
9f44f7f3b5 Introduce a vendor attribute to represent the PNO/EPNO Request ID
This request ID was wrongly referred from the REQUEST_ID in
enum qca_wlan_vendor_attr_gscan_config_params which is mapped to
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM in PNO Config.
Hence define a different attribute to represent the request ID
for PNO Config.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:11:35 +03:00
Jouni Malinen
5579c11c3e Fix a typo in vendor attribute documentation
The attribute is QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SAR_ENABLE, not
QCA_WLAN_VENDOR_ATTR_SAR_LIMITS_SELECT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-07 13:26:45 +03:00
Sunil Dutt
528b655788 Add Set Wi-Fi Configuration vendor attribute to configure LRO
This can be used to dynamically enable/disable LRO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 19:25:46 +03:00
Sunil Dutt
944f359e19 Introduce a vendor command to specify the active Type Of Service
This commit introduces QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS to specify
the active Type Of Service on the specific interface. This can be used
to modify some of the low level scan parameters (off channel dwell time,
home channel time) in the driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-23 19:23:38 +03:00
Sunil Dutt
9ddba3a309 Rename vendor attribute DISABLE_OFFCHANNEL to RESTRICT_OFFCHANNEL
This commit renames the vendor attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_OFFCHANNEL to
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL as intended by the
original commit d506c35efc ('Set Wi-Fi
Configuration attribute to restrict offchannel operations').

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-26 13:18:06 +03:00
Sunil Dutt
d506c35efc Set Wi-Fi Configuration attribute to restrict offchannel operations
This commit defines an attribute to
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION -
QCA_WLAN_VENDOR_ATTR_CONFIG_RESTRICT_OFFCHANNEL which can be used to
restrict offchannel operations on the AP/GO interface.

The goal is to restrict any operations which would cause the AP/GO to
leave its operating channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-23 00:10:01 +03:00
Vidyullatha Kanchanapally
e8e430fe7a Vendor attributes to retain connection on a roam request failure
This commit introduces the following two attributes to
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH events:

QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_STATUS - Indicates the status of
	re-association requested by user space
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RETAIN_CONNECTION - Indicates whether
	the old association was maintained when a re-association
	is requested by user space and that re-association attempt
	fails (i.e., cannot connect to the requested BSS, but can
	remain associated with the BSS with which the association was
	in place when being requested to roam).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-12 00:39:00 +03:00
Sunil Dutt
33117656e6 Define a QCA vendor attribute to update the listen interval
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL which allows the currently
used listen interval to be updated using
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION. This update applies
only during the association and is done without updating the AP about
the change.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-10 23:58:46 +03:00
Sunil Dutt
8befe8a993 Define a QCA attribute to specify the PCL policy for external ACS
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_POLICY to signify the preferred
channel list policy for external ACS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-20 22:49:08 +03:00
Peng Xu
16217e13d8 QCA vendor commands and attributes for spectral scan
Add new vendor commands for starting and stoppping spectral scan. Add
vendor attributes for configuring spectral scan parameters as part of
the start command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-06 17:34:13 +03:00
Zhaoyang Liu
1275958873 QCA vendor command: Add TA max duration attribute for OCB configure
Add attribute for TA max duration after last TA received. So that local
time is synchromous to other communicating OCB STAs. If the duration
expires, OCB STA without UTC time source is not in sync to other STAs
and stop scheduling DSRC channel switch after max duration.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:19:38 +03:00
Zhaoyang Liu
2a9ec7c69c Define attributes for QCA vendor OCB commands
Document QCA vendor OCB commands about IEEE Std 802.11 communication
outside the context of a basic service set. Also define all attributes
for the specific OCB commands.

Signed-off-by: Zhaoyang Liu <zhaoyang@codeaurora.org>
Signed-off-by: Ferry Zhou <tianguiz@codeaurora.org>
2017-03-27 17:17:03 +03:00
lifeng
6c2056abe5 QCA vendor attributes to extend antenna diversity functionality
1. Add new attribute to report corresponding antenna information to the
chain RSSI which is used in subcmd
QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI.

2. Add a series of attr to support the new wmi interface
WMI_PDEV_PARAM_ANT_DIV_USRCFG which export parameters setting of antenna
diversity algorithm to userspace.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2017-03-15 21:30:00 +02:00
Zhang Qian
b4ae5f04dc Add vendor attribute to config propagation delay's absolute value
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY is added to set
propagation delay's absolute value. This is a more detailed version of
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY.

Signed-off-by: Zhang Qian <zhangq@qti.qualcomm.com>
2017-03-15 21:24:25 +02:00
Dmitry Shmidt
7f5f4e46ac Fix QCA_ATTR_NUD_STATS_IS_DAD value
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2017-03-14 21:11:18 +02:00
Alexei Avshalom Lazar
160dca0784 Add QCA vendor command/attr for BRP antenna limit control
Add QCA_NL80211_VENDOR_SUBCMD_BRP_SET_ANT_LIMIT for setting the number
of antennas that will be active in different modes for each connection.

Signed-off-by: Alexei Avshalom Lazar <qca_ailizaro@qca.qualcomm.com>
2017-03-02 15:05:46 +02:00
Gaole Zhang
21ac782797 QCA nl80211 vendor attribute for specific sub-20 MHz channel width
Define a new attribute QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH.
This attribute can set a station device to work in 5 or 10 MHz channel
width while in disconnect state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-01 11:55:04 +02:00
Peng Xu
7785c70bbb QCA vendor command for fetching HE capabilities
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:39:30 +02:00
Jouni Malinen
09a97eb27e Update the copyright notice years for QCA vendor definitions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-04 17:05:30 +02:00
Sunil Dutt
841e9a8c73 QCA vendor command to set the trace levels for the specific QCA module
This commit introduces the vendor command to set the trace level
for the respective QCA host driver module.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-04 17:05:21 +02:00
Kanchanapally, Vidyullatha
70407ee5c3 Add QCA vendor definitions for BSS transition status
Introduce definitions for QCA vendor specific subcommands and attributes
for fetching BSS transition status.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-01-30 22:31:46 +02:00