Space_Invaders/Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma2d.h
2021-05-10 17:42:55 +02:00

694 lines
30 KiB
C

/**
******************************************************************************
* @file stm32f7xx_hal_dma2d.h
* @author MCD Application Team
* @brief Header file of DMA2D HAL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F7xx_HAL_DMA2D_H
#define STM32F7xx_HAL_DMA2D_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
#if defined (DMA2D)
/** @addtogroup DMA2D DMA2D
* @brief DMA2D HAL module driver
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
* @{
*/
#define MAX_DMA2D_LAYER 2U /*!< DMA2D maximum number of layers */
/**
* @brief DMA2D CLUT Structure definition
*/
typedef struct
{
uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
uint32_t CLUTColorMode; /*!< Configures the DMA2D CLUT color mode.
This parameter can be one value of @ref DMA2D_CLUT_CM. */
uint32_t Size; /*!< Configures the DMA2D CLUT size.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
} DMA2D_CLUTCfgTypeDef;
/**
* @brief DMA2D Init structure definition
*/
typedef struct
{
uint32_t Mode; /*!< Configures the DMA2D transfer mode.
This parameter can be one value of @ref DMA2D_Mode. */
uint32_t ColorMode; /*!< Configures the color format of the output image.
This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
uint32_t OutputOffset; /*!< Specifies the Offset value.
This parameter must be a number between
Min_Data = 0x0000 and Max_Data = 0x3FFF. */
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
uint32_t AlphaInverted; /*!< Select regular or inverted alpha value
for the output pixel format converter.
This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR)
for the output pixel format converter.
This parameter can be one value of @ref DMA2D_RB_Swap. */
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
} DMA2D_InitTypeDef;
/**
* @brief DMA2D Layer structure definition
*/
typedef struct
{
uint32_t InputOffset; /*!< Configures the DMA2D foreground or background offset.
This parameter must be a number between
Min_Data = 0x0000 and Max_Data = 0x3FFF. */
uint32_t InputColorMode; /*!< Configures the DMA2D foreground or background color mode.
This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
uint32_t AlphaMode; /*!< Configures the DMA2D foreground or background alpha mode.
This parameter can be one value of @ref DMA2D_Alpha_Mode. */
uint32_t InputAlpha; /*!< Specifies the DMA2D foreground or background alpha value and color value
in case of A8 or A4 color mode.
This parameter must be a number between Min_Data = 0x00
and Max_Data = 0xFF except for the color modes detailed below.
@note In case of A8 or A4 color mode (ARGB),
this parameter must be a number between
Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
- InputAlpha[24:31] is the alpha value ALPHA[0:7]
- InputAlpha[16:23] is the red value RED[0:7]
- InputAlpha[8:15] is the green value GREEN[0:7]
- InputAlpha[0:7] is the blue value BLUE[0:7]. */
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
uint32_t AlphaInverted; /*!< Select regular or inverted alpha value.
This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
uint32_t RedBlueSwap; /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR).
This parameter can be one value of @ref DMA2D_RB_Swap. */
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
} DMA2D_LayerCfgTypeDef;
/**
* @brief HAL DMA2D State structures definition
*/
typedef enum
{
HAL_DMA2D_STATE_RESET = 0x00U, /*!< DMA2D not yet initialized or disabled */
HAL_DMA2D_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
HAL_DMA2D_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
HAL_DMA2D_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
HAL_DMA2D_STATE_ERROR = 0x04U, /*!< DMA2D state error */
HAL_DMA2D_STATE_SUSPEND = 0x05U /*!< DMA2D process is suspended */
} HAL_DMA2D_StateTypeDef;
/**
* @brief DMA2D handle Structure definition
*/
typedef struct __DMA2D_HandleTypeDef
{
DMA2D_TypeDef *Instance; /*!< DMA2D register base address. */
DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters. */
void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer complete callback. */
void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D transfer error callback. */
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
void (* LineEventCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D line event callback. */
void (* CLUTLoadingCpltCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D CLUT loading completion callback */
void (* MspInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp Init callback. */
void (* MspDeInitCallback)(struct __DMA2D_HandleTypeDef *hdma2d); /*!< DMA2D Msp DeInit callback. */
#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */
DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
HAL_LockTypeDef Lock; /*!< DMA2D lock. */
__IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state. */
__IO uint32_t ErrorCode; /*!< DMA2D error code. */
} DMA2D_HandleTypeDef;
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
/**
* @brief HAL DMA2D Callback pointer definition
*/
typedef void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef *hdma2d); /*!< Pointer to a DMA2D common callback function */
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
* @{
*/
/** @defgroup DMA2D_Error_Code DMA2D Error Code
* @{
*/
#define HAL_DMA2D_ERROR_NONE 0x00000000U /*!< No error */
#define HAL_DMA2D_ERROR_TE 0x00000001U /*!< Transfer error */
#define HAL_DMA2D_ERROR_CE 0x00000002U /*!< Configuration error */
#define HAL_DMA2D_ERROR_CAE 0x00000004U /*!< CLUT access error */
#define HAL_DMA2D_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U /*!< Invalid callback error */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/** @defgroup DMA2D_Mode DMA2D Mode
* @{
*/
#define DMA2D_M2M 0x00000000U /*!< DMA2D memory to memory transfer mode */
#define DMA2D_M2M_PFC DMA2D_CR_MODE_0 /*!< DMA2D memory to memory with pixel format conversion transfer mode */
#define DMA2D_M2M_BLEND DMA2D_CR_MODE_1 /*!< DMA2D memory to memory with blending transfer mode */
#define DMA2D_R2M DMA2D_CR_MODE /*!< DMA2D register to memory transfer mode */
/**
* @}
*/
/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode
* @{
*/
#define DMA2D_OUTPUT_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D color mode */
#define DMA2D_OUTPUT_RGB888 DMA2D_OPFCCR_CM_0 /*!< RGB888 DMA2D color mode */
#define DMA2D_OUTPUT_RGB565 DMA2D_OPFCCR_CM_1 /*!< RGB565 DMA2D color mode */
#define DMA2D_OUTPUT_ARGB1555 (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
#define DMA2D_OUTPUT_ARGB4444 DMA2D_OPFCCR_CM_2 /*!< ARGB4444 DMA2D color mode */
/**
* @}
*/
/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
* @{
*/
#define DMA2D_INPUT_ARGB8888 0x00000000U /*!< ARGB8888 color mode */
#define DMA2D_INPUT_RGB888 0x00000001U /*!< RGB888 color mode */
#define DMA2D_INPUT_RGB565 0x00000002U /*!< RGB565 color mode */
#define DMA2D_INPUT_ARGB1555 0x00000003U /*!< ARGB1555 color mode */
#define DMA2D_INPUT_ARGB4444 0x00000004U /*!< ARGB4444 color mode */
#define DMA2D_INPUT_L8 0x00000005U /*!< L8 color mode */
#define DMA2D_INPUT_AL44 0x00000006U /*!< AL44 color mode */
#define DMA2D_INPUT_AL88 0x00000007U /*!< AL88 color mode */
#define DMA2D_INPUT_L4 0x00000008U /*!< L4 color mode */
#define DMA2D_INPUT_A8 0x00000009U /*!< A8 color mode */
#define DMA2D_INPUT_A4 0x0000000AU /*!< A4 color mode */
/**
* @}
*/
/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
* @{
*/
#define DMA2D_NO_MODIF_ALPHA 0x00000000U /*!< No modification of the alpha channel value */
#define DMA2D_REPLACE_ALPHA 0x00000001U /*!< Replace original alpha channel value by programmed alpha value */
#define DMA2D_COMBINE_ALPHA 0x00000002U /*!< Replace original alpha channel value by programmed alpha value
with original alpha channel value */
/**
* @}
*/
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
/** @defgroup DMA2D_Alpha_Inverted DMA2D Alpha Inversion
* @{
*/
#define DMA2D_REGULAR_ALPHA 0x00000000U /*!< No modification of the alpha channel value */
#define DMA2D_INVERTED_ALPHA 0x00000001U /*!< Invert the alpha channel value */
/**
* @}
*/
/** @defgroup DMA2D_RB_Swap DMA2D Red and Blue Swap
* @{
*/
#define DMA2D_RB_REGULAR 0x00000000U /*!< Select regular mode (RGB or ARGB) */
#define DMA2D_RB_SWAP 0x00000001U /*!< Select swap mode (BGR or ABGR) */
/**
* @}
*/
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
* @{
*/
#define DMA2D_CCM_ARGB8888 0x00000000U /*!< ARGB8888 DMA2D CLUT color mode */
#define DMA2D_CCM_RGB888 0x00000001U /*!< RGB888 DMA2D CLUT color mode */
/**
* @}
*/
/** @defgroup DMA2D_Interrupts DMA2D Interrupts
* @{
*/
#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< CLUT Transfer Complete Interrupt */
#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< CLUT Access Error Interrupt */
#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
/**
* @}
*/
/** @defgroup DMA2D_Flags DMA2D Flags
* @{
*/
#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< CLUT Transfer Complete Interrupt Flag */
#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< CLUT Access Error Interrupt Flag */
#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
/**
* @}
*/
/** @defgroup DMA2D_Aliases DMA2D API Aliases
* @{
*/
#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort
for compatibility with legacy code */
/**
* @}
*/
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
/**
* @brief HAL DMA2D common Callback ID enumeration definition
*/
typedef enum
{
HAL_DMA2D_MSPINIT_CB_ID = 0x00U, /*!< DMA2D MspInit callback ID */
HAL_DMA2D_MSPDEINIT_CB_ID = 0x01U, /*!< DMA2D MspDeInit callback ID */
HAL_DMA2D_TRANSFERCOMPLETE_CB_ID = 0x02U, /*!< DMA2D transfer complete callback ID */
HAL_DMA2D_TRANSFERERROR_CB_ID = 0x03U, /*!< DMA2D transfer error callback ID */
HAL_DMA2D_LINEEVENT_CB_ID = 0x04U, /*!< DMA2D line event callback ID */
HAL_DMA2D_CLUTLOADINGCPLT_CB_ID = 0x05U, /*!< DMA2D CLUT loading completion callback ID */
} HAL_DMA2D_CallbackIDTypeDef;
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported macros ------------------------------------------------------------*/
/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
* @{
*/
/** @brief Reset DMA2D handle state
* @param __HANDLE__ specifies the DMA2D handle.
* @retval None
*/
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
}while(0)
#else
#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
/**
* @brief Enable the DMA2D.
* @param __HANDLE__ DMA2D handle
* @retval None.
*/
#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
/* Interrupt & Flag management */
/**
* @brief Get the DMA2D pending flags.
* @param __HANDLE__ DMA2D handle
* @param __FLAG__ flag to check.
* This parameter can be any combination of the following values:
* @arg DMA2D_FLAG_CE: Configuration error flag
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
* @arg DMA2D_FLAG_CAE: CLUT access error flag
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
* @arg DMA2D_FLAG_TC: Transfer complete flag
* @arg DMA2D_FLAG_TE: Transfer error flag
* @retval The state of FLAG.
*/
#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
/**
* @brief Clear the DMA2D pending flags.
* @param __HANDLE__ DMA2D handle
* @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg DMA2D_FLAG_CE: Configuration error flag
* @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
* @arg DMA2D_FLAG_CAE: CLUT access error flag
* @arg DMA2D_FLAG_TW: Transfer Watermark flag
* @arg DMA2D_FLAG_TC: Transfer complete flag
* @arg DMA2D_FLAG_TE: Transfer error flag
* @retval None
*/
#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
/**
* @brief Enable the specified DMA2D interrupts.
* @param __HANDLE__ DMA2D handle
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg DMA2D_IT_CE: Configuration error interrupt mask
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
* @arg DMA2D_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
* @brief Disable the specified DMA2D interrupts.
* @param __HANDLE__ DMA2D handle
* @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg DMA2D_IT_CE: Configuration error interrupt mask
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
* @arg DMA2D_IT_TE: Transfer error interrupt mask
* @retval None
*/
#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified DMA2D interrupt source is enabled or not.
* @param __HANDLE__ DMA2D handle
* @param __INTERRUPT__ specifies the DMA2D interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA2D_IT_CE: Configuration error interrupt mask
* @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
* @arg DMA2D_IT_CAE: CLUT access error interrupt mask
* @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
* @arg DMA2D_IT_TC: Transfer complete interrupt mask
* @arg DMA2D_IT_TE: Transfer error interrupt mask
* @retval The state of INTERRUPT source.
*/
#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
* @{
*/
/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions *******************************/
HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d);
void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef *hdma2d);
void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef *hdma2d);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID,
pDMA2D_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
* @{
*/
/* IO operation functions *******************************************************/
HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,
uint32_t Height);
HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2,
uint32_t DstAddress, uint32_t Width, uint32_t Height);
HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,
uint32_t Height);
HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2,
uint32_t DstAddress, uint32_t Width, uint32_t Height);
HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg,
uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg,
uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
void HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
void HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
/**
* @}
*/
/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
* @{
*/
/* Peripheral Control functions *************************************************/
HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
/**
* @}
*/
/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
* @{
*/
/* Peripheral State functions ***************************************************/
HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
/**
* @}
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
* @{
*/
/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark
* @{
*/
#define DMA2D_LINE_WATERMARK_MAX DMA2D_LWR_LW /*!< DMA2D maximum line watermark */
/**
* @}
*/
/** @defgroup DMA2D_Color_Value DMA2D Color Value
* @{
*/
#define DMA2D_COLOR_VALUE 0x000000FFU /*!< Color value mask */
/**
* @}
*/
/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
* @{
*/
#define DMA2D_MAX_LAYER 2U /*!< DMA2D maximum number of layers */
/**
* @}
*/
/** @defgroup DMA2D_Layers DMA2D Layers
* @{
*/
#define DMA2D_BACKGROUND_LAYER 0x00000000U /*!< DMA2D Background Layer (layer 0) */
#define DMA2D_FOREGROUND_LAYER 0x00000001U /*!< DMA2D Foreground Layer (layer 1) */
/**
* @}
*/
/** @defgroup DMA2D_Offset DMA2D Offset
* @{
*/
#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< maximum Line Offset */
/**
* @}
*/
/** @defgroup DMA2D_Size DMA2D Size
* @{
*/
#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16U) /*!< DMA2D maximum number of pixels per line */
#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D maximum number of lines */
/**
* @}
*/
/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
* @{
*/
#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8U) /*!< DMA2D maximum CLUT size */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
* @{
*/
#define IS_DMA2D_LAYER(LAYER) (((LAYER) == DMA2D_BACKGROUND_LAYER)\
|| ((LAYER) == DMA2D_FOREGROUND_LAYER))
#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || \
((MODE_ARGB) == DMA2D_OUTPUT_RGB888) || \
((MODE_ARGB) == DMA2D_OUTPUT_RGB565) || \
((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= DMA2D_COLOR_VALUE)
#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || \
((INPUT_CM) == DMA2D_INPUT_RGB888) || \
((INPUT_CM) == DMA2D_INPUT_RGB565) || \
((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
((INPUT_CM) == DMA2D_INPUT_ARGB4444) || \
((INPUT_CM) == DMA2D_INPUT_L8) || \
((INPUT_CM) == DMA2D_INPUT_AL44) || \
((INPUT_CM) == DMA2D_INPUT_AL88) || \
((INPUT_CM) == DMA2D_INPUT_L4) || \
((INPUT_CM) == DMA2D_INPUT_A8) || \
((INPUT_CM) == DMA2D_INPUT_A4))
#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
((AlphaMode) == DMA2D_COMBINE_ALPHA))
#if defined (DMA2D_ALPHA_INV_RB_SWAP_SUPPORT)
#define IS_DMA2D_ALPHA_INVERTED(Alpha_Inverted) (((Alpha_Inverted) == DMA2D_REGULAR_ALPHA) || \
((Alpha_Inverted) == DMA2D_INVERTED_ALPHA))
#define IS_DMA2D_RB_SWAP(RB_Swap) (((RB_Swap) == DMA2D_RB_REGULAR) || \
((RB_Swap) == DMA2D_RB_SWAP))
#endif /* DMA2D_ALPHA_INV_RB_SWAP_SUPPORT */
#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
/**
* @}
*/
/**
* @}
*/
#endif /* defined (DMA2D) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32F7xx_HAL_DMA2D_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/