1307 lines
40 KiB
C
1307 lines
40 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f7xx_hal_dma.c
|
|
* @author MCD Application Team
|
|
* @brief DMA HAL module driver.
|
|
*
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Direct Memory Access (DMA) peripheral:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral State and errors functions
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
(#) Enable and configure the peripheral to be connected to the DMA Stream
|
|
(except for internal SRAM/FLASH memories: no initialization is
|
|
necessary) please refer to Reference manual for connection between peripherals
|
|
and DMA requests.
|
|
|
|
(#) For a given Stream, program the required configuration through the following parameters:
|
|
Transfer Direction, Source and Destination data formats,
|
|
Circular, Normal or peripheral flow control mode, Stream Priority level,
|
|
Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
|
|
Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
|
|
|
|
-@- Prior to HAL_DMA_Init() the clock must be enabled for DMA through the following macros:
|
|
__HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE().
|
|
|
|
*** Polling mode IO operation ***
|
|
=================================
|
|
[..]
|
|
(+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
|
|
address and destination address and the Length of data to be transferred.
|
|
(+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
|
|
case a fixed Timeout can be configured by User depending from his application.
|
|
(+) Use HAL_DMA_Abort() function to abort the current transfer.
|
|
|
|
*** Interrupt mode IO operation ***
|
|
===================================
|
|
[..]
|
|
(+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
|
|
(+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
|
|
(+) Select Callbacks functions using HAL_DMA_RegisterCallback()
|
|
(+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
|
|
Source address and destination address and the Length of data to be transferred. In this
|
|
case the DMA interrupt is configured
|
|
(+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
|
|
(+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
|
|
add his own function by customization of function pointer XferCpltCallback and
|
|
XferErrorCallback (i.e a member of DMA handle structure).
|
|
[..]
|
|
(#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
|
|
detection.
|
|
|
|
(#) Use HAL_DMA_Abort_IT() function to abort the current transfer
|
|
|
|
-@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
|
|
|
|
-@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
|
|
possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
|
|
Half-Word data size for the peripheral to access its data register and set Word data size
|
|
for the Memory to gain in access time. Each two half words will be packed and written in
|
|
a single access to a Word in the Memory).
|
|
|
|
-@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
|
|
and Destination. In this case the Peripheral Data Size will be applied to both Source
|
|
and Destination.
|
|
|
|
*** DMA HAL driver macros list ***
|
|
=============================================
|
|
[..]
|
|
Below the list of most used macros in DMA HAL driver.
|
|
|
|
(+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
|
|
(+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
|
|
(+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
|
|
|
|
[..]
|
|
(@) You can refer to the DMA HAL driver header file for more useful macros
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f7xx_hal.h"
|
|
|
|
/** @addtogroup STM32F7xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DMA DMA
|
|
* @brief DMA HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_DMA_MODULE_ENABLED
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
typedef struct
|
|
{
|
|
__IO uint32_t ISR; /*!< DMA interrupt status register */
|
|
__IO uint32_t Reserved0;
|
|
__IO uint32_t IFCR; /*!< DMA interrupt flag clear register */
|
|
} DMA_Base_Registers;
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @addtogroup DMA_Private_Constants
|
|
* @{
|
|
*/
|
|
#define HAL_TIMEOUT_DMA_ABORT ((uint32_t)5) /* 5 ms */
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @addtogroup DMA_Private_Functions
|
|
* @{
|
|
*/
|
|
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
|
static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
|
|
static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions ---------------------------------------------------------*/
|
|
/** @addtogroup DMA_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group1
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..]
|
|
This section provides functions allowing to initialize the DMA Stream source
|
|
and destination addresses, incrementation and data sizes, transfer direction,
|
|
circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
|
|
[..]
|
|
The HAL_DMA_Init() function follows the DMA configuration procedures as described in
|
|
reference manual.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initialize the DMA according to the specified
|
|
* parameters in the DMA_InitTypeDef and create the associated handle.
|
|
* @param hdma Pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
|
|
{
|
|
uint32_t tmp = 0U;
|
|
uint32_t tickstart = HAL_GetTick();
|
|
DMA_Base_Registers *regs;
|
|
|
|
/* Check the DMA peripheral state */
|
|
if(hdma == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
|
|
assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
|
|
assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
|
|
assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
|
|
assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
|
|
assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
|
|
assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
|
|
assert_param(IS_DMA_MODE(hdma->Init.Mode));
|
|
assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
|
|
assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
|
|
/* Check the memory burst, peripheral burst and FIFO threshold parameters only
|
|
when FIFO mode is enabled */
|
|
if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
|
|
{
|
|
assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
|
|
assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
|
|
assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
|
|
}
|
|
|
|
/* Allocate lock resource */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change DMA peripheral state */
|
|
hdma->State = HAL_DMA_STATE_BUSY;
|
|
|
|
/* Disable the peripheral */
|
|
__HAL_DMA_DISABLE(hdma);
|
|
|
|
/* Check if the DMA Stream is effectively disabled */
|
|
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
|
|
{
|
|
/* Check for the Timeout */
|
|
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_TIMEOUT;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Get the CR register value */
|
|
tmp = hdma->Instance->CR;
|
|
|
|
/* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
|
|
tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
|
|
DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
|
|
DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
|
|
DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
|
|
|
|
/* Prepare the DMA Stream configuration */
|
|
tmp |= hdma->Init.Channel | hdma->Init.Direction |
|
|
hdma->Init.PeriphInc | hdma->Init.MemInc |
|
|
hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
|
|
hdma->Init.Mode | hdma->Init.Priority;
|
|
|
|
/* the Memory burst and peripheral burst are not used when the FIFO is disabled */
|
|
if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
|
|
{
|
|
/* Get memory burst and peripheral burst */
|
|
tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
|
|
}
|
|
|
|
/* Write to DMA Stream CR register */
|
|
hdma->Instance->CR = tmp;
|
|
|
|
/* Get the FCR register value */
|
|
tmp = hdma->Instance->FCR;
|
|
|
|
/* Clear Direct mode and FIFO threshold bits */
|
|
tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
|
|
|
|
/* Prepare the DMA Stream FIFO configuration */
|
|
tmp |= hdma->Init.FIFOMode;
|
|
|
|
/* The FIFO threshold is not used when the FIFO mode is disabled */
|
|
if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
|
|
{
|
|
/* Get the FIFO threshold */
|
|
tmp |= hdma->Init.FIFOThreshold;
|
|
|
|
/* Check compatibility between FIFO threshold level and size of the memory burst */
|
|
/* for INCR4, INCR8, INCR16 bursts */
|
|
if (hdma->Init.MemBurst != DMA_MBURST_SINGLE)
|
|
{
|
|
if (DMA_CheckFifoParam(hdma) != HAL_OK)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Write to DMA Stream FCR */
|
|
hdma->Instance->FCR = tmp;
|
|
|
|
/* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
|
|
DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
|
|
regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
|
|
|
|
/* Clear all interrupt flags */
|
|
regs->IFCR = 0x3FU << hdma->StreamIndex;
|
|
|
|
/* Initialize the error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
|
|
/* Initialize the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the DMA peripheral
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
|
|
{
|
|
DMA_Base_Registers *regs;
|
|
|
|
/* Check the DMA peripheral state */
|
|
if(hdma == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the DMA peripheral state */
|
|
if(hdma->State == HAL_DMA_STATE_BUSY)
|
|
{
|
|
/* Return error status */
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
|
|
|
|
/* Disable the selected DMA Streamx */
|
|
__HAL_DMA_DISABLE(hdma);
|
|
|
|
/* Reset DMA Streamx control register */
|
|
hdma->Instance->CR = 0U;
|
|
|
|
/* Reset DMA Streamx number of data to transfer register */
|
|
hdma->Instance->NDTR = 0U;
|
|
|
|
/* Reset DMA Streamx peripheral address register */
|
|
hdma->Instance->PAR = 0U;
|
|
|
|
/* Reset DMA Streamx memory 0 address register */
|
|
hdma->Instance->M0AR = 0U;
|
|
|
|
/* Reset DMA Streamx memory 1 address register */
|
|
hdma->Instance->M1AR = 0U;
|
|
|
|
/* Reset DMA Streamx FIFO control register */
|
|
hdma->Instance->FCR = (uint32_t)0x00000021U;
|
|
|
|
/* Get DMA steam Base Address */
|
|
regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
|
|
|
|
/* Clear all interrupt flags at correct offset within the register */
|
|
regs->IFCR = 0x3FU << hdma->StreamIndex;
|
|
|
|
/* Clean all callbacks */
|
|
hdma->XferCpltCallback = NULL;
|
|
hdma->XferHalfCpltCallback = NULL;
|
|
hdma->XferM1CpltCallback = NULL;
|
|
hdma->XferM1HalfCpltCallback = NULL;
|
|
hdma->XferErrorCallback = NULL;
|
|
hdma->XferAbortCallback = NULL;
|
|
|
|
/* Reset the error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
|
|
/* Reset the DMA state */
|
|
hdma->State = HAL_DMA_STATE_RESET;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group2
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Configure the source, destination address and data length and Start DMA transfer
|
|
(+) Configure the source, destination address and data length and
|
|
Start DMA transfer with interrupt
|
|
(+) Abort DMA transfer
|
|
(+) Poll for transfer complete
|
|
(+) Handle DMA interrupt request
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Starts the DMA Transfer.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param SrcAddress The source memory Buffer address
|
|
* @param DstAddress The destination memory Buffer address
|
|
* @param DataLength The length of data to be transferred from source to destination
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdma);
|
|
|
|
if(HAL_DMA_STATE_READY == hdma->State)
|
|
{
|
|
/* Change DMA peripheral state */
|
|
hdma->State = HAL_DMA_STATE_BUSY;
|
|
|
|
/* Initialize the error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
|
|
/* Configure the source, destination address and the data length */
|
|
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_DMA_ENABLE(hdma);
|
|
}
|
|
else
|
|
{
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Return error status */
|
|
status = HAL_BUSY;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Start the DMA Transfer with interrupt enabled.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param SrcAddress The source memory Buffer address
|
|
* @param DstAddress The destination memory Buffer address
|
|
* @param DataLength The length of data to be transferred from source to destination
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* calculate DMA base and stream number */
|
|
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdma);
|
|
|
|
if(HAL_DMA_STATE_READY == hdma->State)
|
|
{
|
|
/* Change DMA peripheral state */
|
|
hdma->State = HAL_DMA_STATE_BUSY;
|
|
|
|
/* Initialize the error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
|
|
|
/* Configure the source, destination address and the data length */
|
|
DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
|
|
|
/* Clear all interrupt flags at correct offset within the register */
|
|
regs->IFCR = 0x3FU << hdma->StreamIndex;
|
|
|
|
/* Enable Common interrupts*/
|
|
hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
|
|
hdma->Instance->FCR |= DMA_IT_FE;
|
|
|
|
if(hdma->XferHalfCpltCallback != NULL)
|
|
{
|
|
hdma->Instance->CR |= DMA_IT_HT;
|
|
}
|
|
|
|
/* Enable the Peripheral */
|
|
__HAL_DMA_ENABLE(hdma);
|
|
}
|
|
else
|
|
{
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Return error status */
|
|
status = HAL_BUSY;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Aborts the DMA Transfer.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
*
|
|
* @note After disabling a DMA Stream, a check for wait until the DMA Stream is
|
|
* effectively disabled is added. If a Stream is disabled
|
|
* while a data transfer is ongoing, the current data will be transferred
|
|
* and the Stream will be effectively disabled only after the transfer of
|
|
* this single data is finished.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
|
|
{
|
|
/* calculate DMA base and stream number */
|
|
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
|
|
|
|
uint32_t tickstart = HAL_GetTick();
|
|
|
|
if(hdma->State != HAL_DMA_STATE_BUSY)
|
|
{
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Disable all the transfer interrupts */
|
|
hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
|
|
hdma->Instance->FCR &= ~(DMA_IT_FE);
|
|
|
|
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
|
|
{
|
|
hdma->Instance->CR &= ~(DMA_IT_HT);
|
|
}
|
|
|
|
/* Disable the stream */
|
|
__HAL_DMA_DISABLE(hdma);
|
|
|
|
/* Check if the DMA Stream is effectively disabled */
|
|
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET)
|
|
{
|
|
/* Check for the Timeout */
|
|
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_TIMEOUT;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Clear all interrupt flags at correct offset within the register */
|
|
regs->IFCR = 0x3FU << hdma->StreamIndex;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state*/
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Aborts the DMA Transfer in Interrupt mode.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma)
|
|
{
|
|
if(hdma->State != HAL_DMA_STATE_BUSY)
|
|
{
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
return HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Set Abort State */
|
|
hdma->State = HAL_DMA_STATE_ABORT;
|
|
|
|
/* Disable the stream */
|
|
__HAL_DMA_DISABLE(hdma);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Polling for transfer complete.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param CompleteLevel Specifies the DMA level complete.
|
|
* @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead.
|
|
* This model could be used for debug purpose.
|
|
* @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
|
|
* @param Timeout Timeout duration.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
uint32_t mask_cpltlevel;
|
|
uint32_t tickstart = HAL_GetTick();
|
|
uint32_t tmpisr;
|
|
|
|
/* calculate DMA base and stream number */
|
|
DMA_Base_Registers *regs;
|
|
|
|
if(HAL_DMA_STATE_BUSY != hdma->State)
|
|
{
|
|
/* No transfer ongoing */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER;
|
|
__HAL_UNLOCK(hdma);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Polling mode not supported in circular mode and double buffering mode */
|
|
if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET)
|
|
{
|
|
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Get the level transfer complete flag */
|
|
if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
|
|
{
|
|
/* Transfer Complete flag */
|
|
mask_cpltlevel = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
|
|
}
|
|
else
|
|
{
|
|
/* Half Transfer Complete flag */
|
|
mask_cpltlevel = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
|
|
}
|
|
|
|
regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
|
|
tmpisr = regs->ISR;
|
|
|
|
while(((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET))
|
|
{
|
|
/* Check for the Timeout (Not applicable in circular mode)*/
|
|
if(Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Get the ISR register value */
|
|
tmpisr = regs->ISR;
|
|
|
|
if((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_TE;
|
|
|
|
/* Clear the transfer error flag */
|
|
regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
|
|
}
|
|
|
|
if((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_FE;
|
|
|
|
/* Clear the FIFO error flag */
|
|
regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
|
|
}
|
|
|
|
if((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_DME;
|
|
|
|
/* Clear the Direct Mode error flag */
|
|
regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
|
|
}
|
|
}
|
|
|
|
if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
|
|
{
|
|
if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
|
|
{
|
|
HAL_DMA_Abort(hdma);
|
|
|
|
/* Clear the half transfer and transfer complete flags */
|
|
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State= HAL_DMA_STATE_READY;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Get the level transfer complete flag */
|
|
if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
|
|
{
|
|
/* Clear the half transfer and transfer complete flags */
|
|
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
}
|
|
else
|
|
{
|
|
/* Clear the half transfer flag */
|
|
regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Handles DMA interrupt request.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval None
|
|
*/
|
|
void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
|
|
{
|
|
uint32_t tmpisr;
|
|
__IO uint32_t count = 0;
|
|
uint32_t timeout = SystemCoreClock / 9600;
|
|
|
|
/* calculate DMA base and stream number */
|
|
DMA_Base_Registers *regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
|
|
|
|
tmpisr = regs->ISR;
|
|
|
|
/* Transfer Error Interrupt management ***************************************/
|
|
if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
|
|
{
|
|
/* Disable the transfer error interrupt */
|
|
hdma->Instance->CR &= ~(DMA_IT_TE);
|
|
|
|
/* Clear the transfer error flag */
|
|
regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
|
|
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_TE;
|
|
}
|
|
}
|
|
/* FIFO Error Interrupt management ******************************************/
|
|
if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
|
|
{
|
|
/* Clear the FIFO error flag */
|
|
regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
|
|
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_FE;
|
|
}
|
|
}
|
|
/* Direct Mode Error Interrupt management ***********************************/
|
|
if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
|
|
{
|
|
/* Clear the direct mode error flag */
|
|
regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
|
|
|
|
/* Update error code */
|
|
hdma->ErrorCode |= HAL_DMA_ERROR_DME;
|
|
}
|
|
}
|
|
/* Half Transfer Complete Interrupt management ******************************/
|
|
if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
|
|
{
|
|
/* Clear the half transfer complete flag */
|
|
regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
|
|
|
|
/* Multi_Buffering mode enabled */
|
|
if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
|
|
{
|
|
/* Current memory buffer used is Memory 0 */
|
|
if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
|
|
{
|
|
if(hdma->XferHalfCpltCallback != NULL)
|
|
{
|
|
/* Half transfer callback */
|
|
hdma->XferHalfCpltCallback(hdma);
|
|
}
|
|
}
|
|
/* Current memory buffer used is Memory 1 */
|
|
else
|
|
{
|
|
if(hdma->XferM1HalfCpltCallback != NULL)
|
|
{
|
|
/* Half transfer callback */
|
|
hdma->XferM1HalfCpltCallback(hdma);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
|
|
if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
|
|
{
|
|
/* Disable the half transfer interrupt */
|
|
hdma->Instance->CR &= ~(DMA_IT_HT);
|
|
}
|
|
|
|
if(hdma->XferHalfCpltCallback != NULL)
|
|
{
|
|
/* Half transfer callback */
|
|
hdma->XferHalfCpltCallback(hdma);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* Transfer Complete Interrupt management ***********************************/
|
|
if ((tmpisr & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
|
|
{
|
|
if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
|
|
{
|
|
/* Clear the transfer complete flag */
|
|
regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
|
|
|
|
if(HAL_DMA_STATE_ABORT == hdma->State)
|
|
{
|
|
/* Disable all the transfer interrupts */
|
|
hdma->Instance->CR &= ~(DMA_IT_TC | DMA_IT_TE | DMA_IT_DME);
|
|
hdma->Instance->FCR &= ~(DMA_IT_FE);
|
|
|
|
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
|
|
{
|
|
hdma->Instance->CR &= ~(DMA_IT_HT);
|
|
}
|
|
|
|
/* Clear all interrupt flags at correct offset within the register */
|
|
regs->IFCR = 0x3FU << hdma->StreamIndex;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
|
|
if(hdma->XferAbortCallback != NULL)
|
|
{
|
|
hdma->XferAbortCallback(hdma);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != RESET)
|
|
{
|
|
/* Current memory buffer used is Memory 0 */
|
|
if((hdma->Instance->CR & DMA_SxCR_CT) == RESET)
|
|
{
|
|
if(hdma->XferM1CpltCallback != NULL)
|
|
{
|
|
/* Transfer complete Callback for memory1 */
|
|
hdma->XferM1CpltCallback(hdma);
|
|
}
|
|
}
|
|
/* Current memory buffer used is Memory 1 */
|
|
else
|
|
{
|
|
if(hdma->XferCpltCallback != NULL)
|
|
{
|
|
/* Transfer complete Callback for memory0 */
|
|
hdma->XferCpltCallback(hdma);
|
|
}
|
|
}
|
|
}
|
|
/* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
|
|
else
|
|
{
|
|
if((hdma->Instance->CR & DMA_SxCR_CIRC) == RESET)
|
|
{
|
|
/* Disable the transfer complete interrupt */
|
|
hdma->Instance->CR &= ~(DMA_IT_TC);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
}
|
|
|
|
if(hdma->XferCpltCallback != NULL)
|
|
{
|
|
/* Transfer complete callback */
|
|
hdma->XferCpltCallback(hdma);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* manage error case */
|
|
if(hdma->ErrorCode != HAL_DMA_ERROR_NONE)
|
|
{
|
|
if((hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET)
|
|
{
|
|
hdma->State = HAL_DMA_STATE_ABORT;
|
|
|
|
/* Disable the stream */
|
|
__HAL_DMA_DISABLE(hdma);
|
|
|
|
do
|
|
{
|
|
if (++count > timeout)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
/* Change the DMA state */
|
|
hdma->State = HAL_DMA_STATE_READY;
|
|
}
|
|
|
|
if(hdma->XferErrorCallback != NULL)
|
|
{
|
|
/* Transfer error callback */
|
|
hdma->XferErrorCallback(hdma);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Register callbacks
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param CallbackID User Callback identifier
|
|
* a DMA_HandleTypeDef structure as parameter.
|
|
* @param pCallback pointer to private callbacsk function which has pointer to
|
|
* a DMA_HandleTypeDef structure as parameter.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma))
|
|
{
|
|
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdma);
|
|
|
|
if(HAL_DMA_STATE_READY == hdma->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_DMA_XFER_CPLT_CB_ID:
|
|
hdma->XferCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_HALFCPLT_CB_ID:
|
|
hdma->XferHalfCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_M1CPLT_CB_ID:
|
|
hdma->XferM1CpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
|
|
hdma->XferM1HalfCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_ERROR_CB_ID:
|
|
hdma->XferErrorCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_ABORT_CB_ID:
|
|
hdma->XferAbortCallback = pCallback;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief UnRegister callbacks
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param CallbackID User Callback identifier
|
|
* a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdma);
|
|
|
|
if(HAL_DMA_STATE_READY == hdma->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_DMA_XFER_CPLT_CB_ID:
|
|
hdma->XferCpltCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_HALFCPLT_CB_ID:
|
|
hdma->XferHalfCpltCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_M1CPLT_CB_ID:
|
|
hdma->XferM1CpltCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_M1HALFCPLT_CB_ID:
|
|
hdma->XferM1HalfCpltCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_ERROR_CB_ID:
|
|
hdma->XferErrorCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_ABORT_CB_ID:
|
|
hdma->XferAbortCallback = NULL;
|
|
break;
|
|
|
|
case HAL_DMA_XFER_ALL_CB_ID:
|
|
hdma->XferCpltCallback = NULL;
|
|
hdma->XferHalfCpltCallback = NULL;
|
|
hdma->XferM1CpltCallback = NULL;
|
|
hdma->XferM1HalfCpltCallback = NULL;
|
|
hdma->XferErrorCallback = NULL;
|
|
hdma->XferAbortCallback = NULL;
|
|
break;
|
|
|
|
default:
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hdma);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DMA_Exported_Functions_Group3
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### State and Errors functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides functions allowing to
|
|
(+) Check the DMA state
|
|
(+) Get error code
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Returns the DMA state.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
|
|
{
|
|
return hdma->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the DMA error code
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval DMA Error Code
|
|
*/
|
|
uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
|
|
{
|
|
return hdma->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup DMA_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Sets the DMA Transfer parameter.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @param SrcAddress The source memory Buffer address
|
|
* @param DstAddress The destination memory Buffer address
|
|
* @param DataLength The length of data to be transferred from source to destination
|
|
* @retval HAL status
|
|
*/
|
|
static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
|
{
|
|
/* Clear DBM bit */
|
|
hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
|
|
|
|
/* Configure DMA Stream data length */
|
|
hdma->Instance->NDTR = DataLength;
|
|
|
|
/* Memory to Peripheral */
|
|
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
|
|
{
|
|
/* Configure DMA Stream destination address */
|
|
hdma->Instance->PAR = DstAddress;
|
|
|
|
/* Configure DMA Stream source address */
|
|
hdma->Instance->M0AR = SrcAddress;
|
|
}
|
|
/* Peripheral to Memory */
|
|
else
|
|
{
|
|
/* Configure DMA Stream source address */
|
|
hdma->Instance->PAR = SrcAddress;
|
|
|
|
/* Configure DMA Stream destination address */
|
|
hdma->Instance->M0AR = DstAddress;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the DMA Stream base address depending on stream number
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval Stream base address
|
|
*/
|
|
static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
|
|
{
|
|
uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFFU) - 16U) / 24U;
|
|
|
|
/* lookup table for necessary bitshift of flags within status registers */
|
|
static const uint8_t flagBitshiftOffset[8U] = {0U, 6U, 16U, 22U, 0U, 6U, 16U, 22U};
|
|
hdma->StreamIndex = flagBitshiftOffset[stream_number];
|
|
|
|
if (stream_number > 3U)
|
|
{
|
|
/* return pointer to HISR and HIFCR */
|
|
hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU)) + 4U);
|
|
}
|
|
else
|
|
{
|
|
/* return pointer to LISR and LIFCR */
|
|
hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FFU));
|
|
}
|
|
|
|
return hdma->StreamBaseAddress;
|
|
}
|
|
|
|
/**
|
|
* @brief Check compatibility between FIFO threshold level and size of the memory burst
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA Stream.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef DMA_CheckFifoParam(DMA_HandleTypeDef *hdma)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
uint32_t tmp = hdma->Init.FIFOThreshold;
|
|
|
|
/* Memory Data size equal to Byte */
|
|
if(hdma->Init.MemDataAlignment == DMA_MDATAALIGN_BYTE)
|
|
{
|
|
switch (tmp)
|
|
{
|
|
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
|
|
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
|
|
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
break;
|
|
case DMA_FIFO_THRESHOLD_HALFFULL:
|
|
if (hdma->Init.MemBurst == DMA_MBURST_INC16)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
break;
|
|
case DMA_FIFO_THRESHOLD_FULL:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Memory Data size equal to Half-Word */
|
|
else if (hdma->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
|
|
{
|
|
switch (tmp)
|
|
{
|
|
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
|
|
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
|
|
status = HAL_ERROR;
|
|
break;
|
|
case DMA_FIFO_THRESHOLD_HALFFULL:
|
|
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
break;
|
|
case DMA_FIFO_THRESHOLD_FULL:
|
|
if (hdma->Init.MemBurst == DMA_MBURST_INC16)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Memory Data size equal to Word */
|
|
else
|
|
{
|
|
switch (tmp)
|
|
{
|
|
case DMA_FIFO_THRESHOLD_1QUARTERFULL:
|
|
case DMA_FIFO_THRESHOLD_HALFFULL:
|
|
case DMA_FIFO_THRESHOLD_3QUARTERSFULL:
|
|
status = HAL_ERROR;
|
|
break;
|
|
case DMA_FIFO_THRESHOLD_FULL:
|
|
if ((hdma->Init.MemBurst & DMA_SxCR_MBURST_1) == DMA_SxCR_MBURST_1)
|
|
{
|
|
status = HAL_ERROR;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|