Commit graph

2465 commits

Author SHA1 Message Date
Jouni Malinen
ee3b84beb3 wlantest: Parse ICMP echo packet and record STA ping success 2010-11-20 22:34:42 +02:00
Jouni Malinen
aebe76594b wlantest: Ignore built files in git status 2010-11-20 21:43:49 +02:00
Jouni Malinen
161d0339c6 wlantest: Move RX EAPOL processing into its own file 2010-11-20 21:40:04 +02:00
Jouni Malinen
464144a43b edit: Add history buffer search
Ctrl-R can now be used to start history search mode.
2010-11-20 17:55:35 +02:00
Jouni Malinen
42034d6f60 edit: Clean up escape code parser 2010-11-20 16:59:55 +02:00
Jouni Malinen
0bee81352f edit: Split escape code parsing into a separate function
This makes edit_read_char() simpler and easier to extend since it
does not need to know anything about the escape codes anymore.
2010-11-20 15:55:51 +02:00
Jouni Malinen
0954399c90 wlantest: Use proper cmd length in fetching STA list 2010-11-20 12:43:16 +02:00
Jouni Malinen
ef6ee3e5a3 edit: Sort completion list 2010-11-20 12:41:15 +02:00
Jouni Malinen
79a670cbf7 wlantest: Add pre-command completion functions
This allows the parameters to each command to be completed.
2010-11-20 12:35:11 +02:00
Jouni Malinen
9364990ace edit: Really fix the completion of last character
The previous commit broke completion in various places. The proper
way of handling the completion of full word is to verify whether
there are more than one possible match at that point.
2010-11-20 12:27:06 +02:00
Jouni Malinen
414780027a edit: Fix completion at the last character
Completion needs to be done even if the full word has been entered.
In addition, fix the space-after-full-word to properly allocate room
for the extra character when completion is used in the middle of the
string.
2010-11-20 11:59:04 +02:00
Jouni Malinen
89eb6b774d edit: Fix delete word to update current position 2010-11-20 11:48:00 +02:00
Jouni Malinen
e4f13f9256 edit: Fix completion of arguments other than the first one 2010-11-20 11:45:42 +02:00
Jouni Malinen
73669f1b03 edit: Fix Home/End escape codes 2010-11-20 11:20:48 +02:00
Jouni Malinen
ef49bb80a9 wlantest: Add interactive mode to wlantest_cli 2010-11-20 10:48:32 +02:00
Jouni Malinen
7302a35ed4 edit: Add string completion support on tab 2010-11-20 00:42:02 +02:00
Jouni Malinen
57f7d03f91 wlantest: Do not add new BSS/STA entries based on ctrl commands
Introduce bss_find()/sta_find() as an alternative bss_get()/sta_get()
command that do not allocate new BSS/STA entry if no existing entry
is found.
2010-11-19 22:00:10 +02:00
Jouni Malinen
fbdd21327e wlantest: Add add_passphrase command
This can be used to add a new known passphrase without having to
restart wlantest.
2010-11-19 19:31:55 +02:00
Jouni Malinen
a16c859034 wlantest: Add command for fetching wlantest version 2010-11-19 17:45:19 +02:00
Jouni Malinen
990153b4dd wlantest: Add support for injecting (Re)Association Request frames 2010-11-19 17:09:02 +02:00
Jouni Malinen
2e4c34691b wlantest: Add support for protecting injected broadcast frames 2010-11-19 16:48:33 +02:00
Jouni Malinen
4adc5e0f0b wlantest: Add support for injecting Deauth/Disassoc frames 2010-11-19 16:22:44 +02:00
Jouni Malinen
799aa95b23 wlantest: Update SA Query trans id based on injected frame
This allows the SA Query transaction id matching code to be used
to verify that a valid response is received for the injected
request.
2010-11-19 16:12:46 +02:00
Jouni Malinen
571ab37b86 wlantest: Add support for CCMP protection for injected frames 2010-11-19 16:09:19 +02:00
Jouni Malinen
f6b25ca5b4 P2P: Add some initial documentation for P2P use 2010-11-19 13:24:45 +02:00
Jouni Malinen
ab72eb5256 P2P: Accept invitations to already running persistent group
We can automatically accept invitations that are for a persistent
group that is already running. There is no need to confirm this
separately or preparare a new group interface.
2010-11-19 12:58:31 +02:00
Jouni Malinen
9d39057c2b P2P: Stop p2p_find/p2p_listen when Invitation is accepted
When an Invitation to reinvoke a persistent group is accepted,
we need to make sure that any pending p2p_find or p2p_listen
operation gets stopped to avoid consuming all radio resources
doing device discovery while the group is being set up.
2010-11-19 12:58:03 +02:00
Jouni Malinen
6c0da49f62 P2P: Do not start multiple copies of same persistent group
When running p2p_group_add persistent=<id>, verify whether the
requested group is already running and if so, do not try to
start another copy of it.
2010-11-19 12:57:36 +02:00
Jouni Malinen
7d23e971f0 wlantest: Add preliminary infrastructure for injecting frames
This adds new commands for wlantest_cli to request wlantest to
inject frames. This version can only send out Authentication
frames and unprotected SA Query Request frames, but there is
now place to add more frames and encryption with future commits.
2010-11-19 00:35:13 +02:00
Jouni Malinen
6d5ce9fc90 wlantest: Add BSS/STA statistics counters
These counters can be cleared and queried from external programs to
script various testing tasks.
2010-11-18 19:05:29 +02:00
Jouni Malinen
d356bd630b wlantest: Add flush command for dropping all BSS data 2010-11-18 17:36:08 +02:00
Jouni Malinen
6f2346c144 wlantest: Add list_bss and list_sta commands
These can be used to list the current BSS and STA information
maintained in wlantest.
2010-11-18 17:17:18 +02:00
Jouni Malinen
a6c1810297 wlantest: Fix wlantest_cli dependency to include wlantest library 2010-11-18 16:27:25 +02:00
Jouni Malinen
ca806fb540 P2P: Indicate WPS events from AP mode only during group formation
The duplicated WPS event in the parent interface should only be used
during P2P group formation, i.e., when the WPS operation was actually
started using the parent interface. When authorizing a client to
connect to an already running group, the WPS command is issued on
the group interface and there is no need to duplicate the event to
the parent interface.
2010-11-18 12:42:02 +02:00
Jouni Malinen
d1b024c9e5 P2P: Make sure wpa_s->global->p2p_group_formation gets cleared
This pointer is now used in number of places to check whether an
interface is in P2P Group Formation, so we better make sure it gets
cleared when group formation has been completed. This was done in
only some of the cases.
2010-11-18 12:41:27 +02:00
Jouni Malinen
9dd7d6b09c WPS: Add special AP Setup Locked mode to allow read only ER
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change then.
In other words, the protocol is allowed to continue past M2, but
is stopped at M7 when AP is in this mode. WPS IE does not
advertise AP Setup Locked in this case to avoid interoperability
issues.

In wpa_supplicant, use ap_setup_locked=2 by default. Since the AP PIN
is disabled by default, this does not enable any new functionality
automatically. To allow the read-only ER to go through the protocol,
wps_ap_pin command needs to be used to enable the AP PIN.
2010-11-17 16:48:39 +02:00
Jouni Malinen
70d84f11fe WPS: Add wps_ap_pin ctrl_iface command for wpa_supplicant AP mode
This can be used to control the AP PIN in wpa_supplicant AP mode
in the same way as the identical command in hostapd ctrl_iface.
2010-11-17 16:46:55 +02:00
Jouni Malinen
bb79dc720b P2P: Fix invitation-to-running-group handling
The pending_invite_ssid_id of -1 (running group, not persistent) was
being stored incorrectly in the group interface, not device interface
(i.e., parent of the group interface) and consequently, the incorrect
information was used when processing the Invitation Response.

If there was a persistent group credentials stored with network id
0, those were used instead to try to set up a persistent group
instead of using the already running group.
2010-11-16 15:22:06 +02:00
Albert Liu
5496062919 P2P: Update pending join interface address during scans
Since the P2P peer entry may not have been available at the time the
join request was issued, we need to allow the P2P Interface Address
to be updated during join-scans when the P2P peer entry for the GO
may be added.
2010-11-15 16:16:39 +02:00
Jouni Malinen
9b1ab931b1 P2P: Allow multiple scan runs to find GO for p2p_connect join
If the GO is not found, we cannot send Provisioning Discovery Request
frame and cannot really connect anyway. Since the Provisioning
Discovery is a mandatory part, it is better to continue join-scan
until the GO is found instead of moving to the next step where
normal connection scan is used (PD would not be used from there).

Use a limit of 10 scan attempts for p2p_connect join to avoid getting
in infinite loop trying to join. If the GO is not found with those
scans, indicate failure (P2P-GROUP-FORMATION-FAILURE) and stop the
join attempt.
2010-11-15 16:15:38 +02:00
Jouni Malinen
e8ecb5fb49 Move wpa_cli readline integration into src/utils/edit_readline.c
All three line editing options are now located in src/utils/edit*.c
and provide the same API to allow easy build time selection.
2010-11-14 22:37:43 +02:00
Jouni Malinen
bdc45634f0 wpa_cli: Use edit API as a wrapper for optional readline 2010-11-14 21:19:35 +02:00
Jouni Malinen
616e0e728e edit: Redraw input line on ^L 2010-11-14 21:03:24 +02:00
Jouni Malinen
82a855bda8 Move command line editing routines into src/utils/edit*.[ch]
This allows the same routines to be shared with other programs
since these are not really specific to wpa_cli.
2010-11-14 20:59:29 +02:00
Jouni Malinen
aee680e8b2 wpa_cli: Add internal line edit implementation
CONFIG_WPA_CLI_EDIT=y can now be used to build wpa_cli with internal
implementation of line editing and history support. This can be used
as a replacement for CONFIG_READLINE=y.
2010-11-14 19:15:23 +02:00
Jouni Malinen
cd10156798 wpa_cli: Replace CONFIG_WPA_CLI_FORK design with eloop
Instead of using a separate process to receive and print event
messages, use a single-process design with eloop to simply
wpa_cli and interaction with readline.
2010-11-14 13:16:51 +02:00
Jouni Malinen
6f1c6549ed wpa_cli: Split wpa_cli_interactive() into two versions
Instead of multiple #ifdef blocks for readline within the function,
use two copies of the functions, one for readline, one without any
readline functionality.
2010-11-14 11:30:19 +02:00
Jouni Malinen
644fb8c8a0 wlantest: Add control interface and wlantest_cli
This can be used to manage wlantest operation during run time.
2010-11-13 18:38:19 +02:00
Jouni Malinen
77ac47278a wlantest: Validate EAPOL-Key reserved fields
In addition, this handles WPA difference in Key Info for Secure
bit in msg 3/4 and 4/4 (not set, since GTK is not yet available).
2010-11-13 14:09:40 +02:00
Jouni Malinen
ad41bb2ea9 wlantest: Add debug print for ignored group addressed Action frames 2010-11-13 13:18:09 +02:00