Commit graph

5098 commits

Author SHA1 Message Date
Jouni Malinen
ec9589fdac tests: Pass apdev instead of bssid to TDLS functions
This makes it easier to add new validation steps into TDLS setup and
teardown processes.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-31 13:27:41 +03:00
Ilan Peer
932659696e nl80211: Remove unused WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT
This is not used anymore after the previous commits that changed the
driver interface to use number of supported concurrent channels instead
of this flag.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:52:09 +03:00
Ilan Peer
0d08efa447 P2P: Use the number of concurrent channels in P2P flows
Change the P2P flows to use the number of concurrent channels
supported by the device and the number of currently used channels
for the P2P flows.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:48:09 +03:00
Jouni Malinen
a21816a933 Use wpa_drv_shared_freq() if get_radio_name() is not supported
Some driver interfaces may not support the get_radio_name() design and
get_shared_radio_freqs() needs to be aware of such possibility when
determining shared radio frequencies.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 20:48:09 +03:00
Ilan Peer
53c5dfc2c4 Change share_vif_oper_freq() to handle multiple freqs
There are devices that can operate several channels concurrently.
Change shared_vif_oper_freq() to get_shared_radio_freqs() that can
return an array of frequencies currently used by all the virtual
interfaces that share the same radio.

In addition, move it to wpa_supplicant.c, so it can be used by other
modules.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 20:03:53 +03:00
Ilan Peer
4752147d88 nl80211: Report the number of concurrent support channels
Previously, drivers only reported if they support multiple concurrent
channels, but did not report the maximum number of supported channels.
Add this reporting to the driver capabilities and add the implementation
to driver_nl80211.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-07-21 19:49:47 +03:00
Jouni Malinen
d7df0fa727 Clean up wpa_supplicant_event() with deauth/disassoc helper functions
wpa_supplicant_event() has grown overly large, so it is useful to split
it into smaller pieces.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:40:40 +03:00
Jouni Malinen
fdae3c40f6 tests: Add a test case for IBSS RSN
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:54 +03:00
Jouni Malinen
fd9f170098 Remove unnecessary nested ifdef CONFIG_AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 16:01:29 +03:00
Antonio Quartulli
13adc57b39 IBSS RSN: Add peer restart detection
To better support the IBSS/RSN mechanism, wpa_supplicant has to be able
to detect a possible peer reboot and in this case it should start a new
EAPOL handshake.

To perform such reboot detection wpa_supplicant has to perform an Open
Authentication by sending an Authentication frame and then replying to
it. IF an Authentication frame is received when the key have already
been exchanged, wpa_supplicant understands that the peer has rebooted
and can reset its state machine.

Whenever a new peer is added to the IBSS wpa_supplicant will start the
Open Authentication and only after having accomplished it will start the
key exchange. If the driver does not support Authentication frame
exchange initiated from user space, this step is skipped to maintain
previous behavior (just go through EAPOL-Key frame processing).

The Open Authentication was partly supported by the Linux kernel but now
wpa_supplicant can register for Authentication frames, handle it in
userspace and so avoid any possible race condition.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:56:53 +03:00
Antonio Quartulli
b21990b4bb nl80211: Register for AUTH frames when joining an IBSS network
In order to correctly handle IBSS/RSN, wpa_supplicant has to register
for any incoming Authentication frmae to properly react when those are
received.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:27:19 +03:00
Nicolas Cavallari
c91f796fb4 nl80211: Support not specifying the frame frequency
If the frequency is not specified the frame is now sent over
the channel used by the current BSS.

This will also log the payload of each sent CMD_FRAME.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
[antonio@open-mesh.com: commit message reworded]
Signed-hostap: Antonio Quartulli <antonio@open-mesh.com>
2013-07-21 15:24:50 +03:00
Jouni Malinen
ec384c566a IBSS RSN: Fix disconnect() with internal SME
Commit 1aef400bf0 implemented IBSS RSN
disconnect() call using sta_deauth() in a way that resulted in NULL
pointer dereference in driver_nl80211.c if SME was in user space. Fix
this by passing the own MAC address in the sta_deauth call.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-21 15:21:38 +03:00
Mohammed Shafi Shajakhan
ed07764699 nl80211: Remove redundant assignment of ifindex
wpa_driver_nl80211_finish_drv_init() takes care of assigning
the interface index.

Signed-hostap: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
2013-07-21 13:20:27 +03:00
Arend van Spriel
4ed8d954dd TDLS: Tear down TDLS using wpas_drv_tlds_oper() if not external
When the device indicates to take care of TDLS operations the TDLS
setup is done calling wpas_drv_tdls_oper(). This patch does a similar
thing for the teardown. This fixes failure of teardown:

"TDLS: Could not find peer <mac> for link Teardown"

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-07-20 17:52:32 +03:00
Chengyi Zhao
831770bffe Cancel delayed scheduled scan when wpa_supplicant cleans up
Because a delayed scheduled scan will access the members of struct
wpa_supplicant which is freed and this can result in a crash,
wpa_supplicant needs to cancel delayed scheduled scan during cleanups.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-07-20 17:47:02 +03:00
Sujith Manoharan
69dd2967db WDS: Fix WEP usage with nl80211 wds_sta=1
The static WEP keys have to be configured for the new VLAN
interface that is created for a 4addr WDS peer, not doing so
breaks WEP functionality in nl80211/4addr based WDS links.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:41:22 +03:00
Michal Kazior
c8ebeda406 wpa_supplicant: Add support for VHT BSS membership selector
This allows wpa_supplicant to associate to an AP that has VHT BSS
membership selector set to indicate VHT support is required for the BSS.

Without the patch it was impossible to connect to, e.g., hostapd-based
AP that has require_vht=1. wpa_supplicant was complaining with:
  hardware does not support required rate 63.0 Mbps

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:28:42 +03:00
Sujith Manoharan
3f9a8137f5 hostapd: Add a config option to control beaconing
In a AP/STA concurrent setup, if the STA interface is continually
scanning, trying to connect to a network, the AP interface
is basically broken since beaconing would be erratic.

This option can be used in a WDS setup where one AP acts as a
Client/AP-Repeater. The Repeater AP interface has to start beaconing
only after the Client interface has established a WDS link with the
"Root AP".

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2013-07-20 17:20:43 +03:00
Michal Kazior
182b2e535c Add missing host_to_le32() for big endian hosts
Compiling hostapd with VHT enabled on a big endian machine resulted in
an undefined symbol error. Fix this by defining the missing macro.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-07-20 17:17:32 +03:00
Jithu Jance
3f53c006c7 nl80211: Ignore disconnect event in case of locally generated request
Previously, there could be two disconnection events in core
wpa_supplicant when going through a case of wpa_supplicant-requested
disconnection with a driver that implements SME internally. This could
result in undesired behavior when a disconnection is followed by a new
connection attempt before the extra event has been received (e.g.,
during fast reassoc or WPS provisioning). Avoid such issues by ignoring
locally generated disconnect events after requesting cfg80211 to
disconnect.

This makes the previously used ignore_next_local_disconnect more
consistent by setting the variable within
wpa_driver_nl80211_disconnect() so that both callers get the same
behavior.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-07-20 16:06:13 +03:00
Jouni Malinen
1075b29571 P2P: Report group formation failure on error to start GO mode
There is no need to wait for the 15 second group formation timeout
before indicating P2P group formation failure if GO mode cannot be
started successfully for some reason.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:46 +03:00
Jouni Malinen
b62b29ea87 Do not block on ctrl_iface monitor events
It looks like some of the global control interface cases ended up
blocking in sendmsg() when trying to send an event. Since this can block
all wpa_supplicant processing for multiple seconds, this is very
undesirable. Avoid this by requesting sendmsg() to return an error
rather than waiting for the message to be sent.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:04:29 +03:00
Jouni Malinen
eb7ddbf108 WPS: Stop SSDP service before freeing the pending entries
This avoids debug warnings about freeing referenced memory.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-11 17:03:50 +03:00
Jouni Malinen
98cbc0a2ab Remove forgotten Xcode defines
Commit 3962b65858 removed the Xcode
project files, but missed the defines in build_config.h. Remove these
since there are no users for them in the current snapshot.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-09 15:20:17 +03:00
Jouni Malinen
0b9d3b22c8 Interworking: Relax 3GPP info PLMN matching for MNC
3GPP TS 24.232 Annex A.3 allows network operator to advertise only two
digits of MNC even if MNC has three digits. Allow such matches in
network selection. In addition, allow three digit matches of MNC even if
MNC length was assumed to be two to avoid missing networks if MNC length
cannot be determined reliably. Remove the '-' separator from simulated
SIM/USIM cases to allow the new matching rules to work.

Fix the PLMN List information element parsing loop to use the length of
the PLMN List instead of the length of the full 3GPP Cellular Info to
avoid unexpected matches should a new element ever be added by 3GPP.

Finally, add more debug prints from PLMN matching to make the logs
easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 16:53:05 +03:00
Junli Zhao
c7a67a7719 WPS: Disconnect when removing existing WPS network block
wpas_clear_wps() was just clearing the current wpa_s->current_ssid
pointer when removing a WPS network block which with the device was
associated. This could leave the association up even though the network
block had already been removed. Prevent this by explicitly disconnecting
from the network instead of such clearing current_ssid.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-07-08 12:09:18 +03:00
Jouni Malinen
fe65847bb1 EAP-EKE: Add server implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
7e7610d788 EAP-EKE: Add peer implementation
This adds a new password-based EAP method defined in RFC 6124.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
489202ddce EAP-SAKE: Use configured server identity
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
a607b42eeb EAP-PSK: Use configured server identity
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
15b042b854 EAP-MSCHAPv2: Use configured server identity
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
162865bc97 EAP-IKEv2 server: Use configured server identity
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
8f89d828b1 EAP-GPSK server: Use configured server identity
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Jouni Malinen
67fe933d40 Add server identity configuration for EAP server
The new server_id parameter in hostapd.conf can now be used to specify
which identity is delivered to the EAP peer with EAP methods that
support authenticated server identity.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-07 20:30:10 +03:00
Tomasz Bursztyka
06aeff5f8f dbus: Register the AutoScan method call at the right place
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2013-07-01 19:11:34 +03:00
Jouni Malinen
0fa28afe35 tests: Use wpa_supplicant global control interface for P2P
This allows more consistent interface to be used regardless of which
P2P driver design is used (especially for P2P management operations
over netdev vs. dedicated P2P_DEVICE).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
78f79fe5fc P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
Adding a new wpa_supplicant control interface for the dedicated
P2P_DEVICE would be quite confusing for programs that manage P2P
operations. Remove this control interface and require the global control
interface to be used since it will provide consistent interface for both
the new dedicated P2P_DEVICE (non-netdev) and old style P2P management
through a netdev.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-07-01 00:36:33 +03:00
Jouni Malinen
441d6d23b2 tests: Initialize global wpa_supplicant control interface
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:21:07 +03:00
Jouni Malinen
1c42b42f6c P2P: Fix TDLS and l2_packet init without P2P Device interface
Commit c68f6200a7 made these calls
conditional on !p2p_mgmt, but forced p2p_mgmt=1 for cases where the
driver does not use the dedicated P2P Device. Fix this by making the
!p2p_mgmt condition apply only if the driver does indicate use of a
dedicated P2P Device.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 20:02:25 +03:00
Jouni Malinen
9e6a321815 Fix non-P2P build after the P2P_DEVICE changes
Commit c68f6200a7 added a call to a
function that exists only for P2P builds. Fix that with #ifdef
CONFIG_P2P.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 13:19:59 +03:00
Jouni Malinen
d53d2596e4 Fix build with older OpenSSL versions
Check that SSL_clear_options and SSL_CTX_clear_options are defined
before using them to avoid compilation failures with older OpenSSL
versions that did not include these macros.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 12:55:52 +03:00
Jouni Malinen
54d4ba427c nl80211: Silence a compiler warning with older gcc versions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 12:54:47 +03:00
Arend van Spriel
2e5ba4b6d1 P2P: Derive group interface name bit more sensibly
The interface name for the P2P group interface is derived from the
P2P management interface. When the P2P management interface is a
P2P Device interface, i.e., p2p-dev-wlanX, the name for the group
interface is abbreviated to p2p-X (X being group index). When the
P2P management interface starts with p2p-dev- use its postfix
instead. So P2P management interface p2p-dev-wlan3 results in group
interface name p2p-wlan3-0.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Arend van Spriel
c68f6200a7 P2P: Create P2P Device interface if supported
If the capability flag of the driver indicates a dedicated P2P Device is
supported, a P2P Device interface is created.

Create the P2P Device in main interface creation loop when the added
interface flags support and P2P supplicant is not yet initialized
avoiding recursion of add_interface.

Do not register l2_packet for P2P Device interface (both for EAPOL and
for TDLS).

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:14 +03:00
Jouni Malinen
851b0c5581 nl80211: Do not indicate P2P_DEVICE support by default
Since the P2P_DEVICE support indication was added to kernel before
everything was working properly, there may be kernel versions in use
with the new mechanism breaking P2P functionality (especially with
mac80211_hwsim). For now, disable P2P_DEVICE support by default and
allow it to be enabled with driver_param=p2p_device=1 in the
configuration file. This default behavior may be changed in the future
once the kernel issues has been resolved in stable releases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-06-30 10:50:13 +03:00
Arend van Spriel
bb4028f165 P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
Setting p2p_no_group_iface means 'use P2P management interface as P2P
connection interface' because it attempts to change the interface type.
The P2P_DEVICE is a dedicated interface and can not be changed. As such
ignore the configuration option.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
7940c7902e nl80211: Use wdev id when cancelling wait for frame using P2P_DEVICE
Another function that needs the wdev id when P2P management is done
using the P2P_DEVICE interface.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
f608081c1d nl80211: Verify P2P GO/client address with all interface addresses
With P2P Device support there will be two interfaces with their
own MAC address. The P2P Interface Address must be unique so verify
it is.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00
Arend van Spriel
5fbcb45daf nl80211: Fix determining phy name for P2P Device
The phy name was determined using /sys/class/net/<ifname> but the P2P
Device is not listed there since it does not have an associated net
device. This patch changes name determination to obtain the name from
the wiphy information provide by nl80211.

Signed-hostap: Arend van Spriel <arend@broadcom.com>
2013-06-30 10:50:13 +03:00