Commit graph

607 commits

Author SHA1 Message Date
Masashi Honma
e29bcf9eab WPS: Check Device Password ID attribute only if present in AP search
I can't pass the "Wi-Fi WPS Test Plan Version 1.0 [5.1.4. Add to AP
using PIN Config method and PASS PHRASE through wired external
registrar]". The wpa_supplicant-0.6.7 can't recoginize the testbed
AP(BCM94704AGRRev-E.2.4) as WPS PIN AP. Because after PIN entered, the
AP sends Selected Registrar attribute=0 and not send Device Password ID
attribute.

The proposed change as-is removed validation of Selected Registrar
attribute completely. However, that part is not included in this commit
since it can cause problems for environments with multiple WPS-enabled
APs. Another workaround for this will be considered in wpa_supplicant
scanning process (e.g., start trying to use WPS with APs that do not set
Selected Registrar to TRUE after couple of scan runs that do not find
any APs with Selected Registrar TRUE).
2009-01-22 15:12:18 +02:00
Jouni Malinen
695e2b48e2 Documented interface for external WPS credential processing 2009-01-21 16:42:11 +02:00
Jouni Malinen
a60e7213e1 Fixed WPS with open and shared WEP networks
Do not initialize EAPOL state machine for the STA when hostapd is
configured to use WPS with open or shared WEP networks. This allows the
STA to use EAPOL-Start to indicate it wants to start WPS in such a case
and hostapd does not end up running through EAPOL authentication timeout
and disconnecting the STA if WPS is not used.

There was already code for starting EAPOL state machines based on
received EAPOL packets, but that was not working properly since
portEnabled was not set to TRUE on that code path. This is now fixed,
too.
2009-01-21 14:18:14 +02:00
Jouni Malinen
aabe26a136 WPS: Added option to disable AP auto-config on first registration
This operation can now be moved into an external program by configuring
hostapd with wps_cred_processing=1 and skip_cred_build=1. A new
ctrl_iface message (WPS-REG-SUCCESS <Enrollee MAC addr> <UUID-E>) will
be used to notify external programs of each successful registration and
that can be used as a tricker to move from unconfigured to configured
state.
2009-01-21 13:48:10 +02:00
Jouni Malinen
d745c7cc1a Added wps_cred_processing configuration option for hostapd
This behaves like the one in wpa_supplicant, i.e., hostapd can be
configured not to process new credentials (AP settings) internally and
instead pass the WPS attributes for an external program to process over
ctrl_iface.
2009-01-21 11:54:12 +02:00
Jouni Malinen
42d16805c9 Enable wpa_msg() for hostapd
Use wpa_msg() like wpa_supplicant in order to avoid having to use direct
hostapd_ctrl_iface_send() calls.
2009-01-21 11:45:56 +02:00
Jouni Malinen
05bf32cc87 Changed Credential MAC Address to be BSSID in AP/Registrar
WPS spec is not very clear on which MAC address is used here, but BSSID
makes more sense than Enrollee MAC address.
2009-01-20 21:28:31 +02:00
Jouni Malinen
790ccdb2b3 Changed the version to 0.7.0 since development branch is now 0.7.x 2009-01-20 21:16:29 +02:00
Jouni Malinen
1cc84c1c6b Increased wpa_cli/hostapd_cli ping interval and made it configurable
The default interval is now 5 seconds (used to be 1 second for
interactive mode and 2 seconds for wpa_cli -a). The interval can be
changed with -G<seconds> command line option.
2009-01-20 21:12:00 +02:00
Jouni Malinen
3a4606585c Implement set_probe_req_ie() for nl80211 drivers 2009-01-20 14:06:02 +02:00
Jouni Malinen
b0e8a05a1e Sync nl80211_copy.h with wireless-testing.git linux/nl80211.h 2009-01-20 13:56:58 +02:00
Jouni Malinen
adddffd129 Fixed MFP Association Comeback mechanism to use Timeout Interval IE
The separate Association Comeback Time IE was removed from IEEE 802.11w
and the Timeout Interval IE (from IEEE 802.11r) is used instead. The
editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but
still, the use of Timeout Interval IE is the expected mechanism.
2009-01-19 18:42:10 +02:00
Jouni Malinen
476621644c WPS: Add configurable option for processing credentials externally
The wps_cred_process option can be used to configure wpa_supplicant to
send received Credential attributes for external processing over
ctrl_iface and dbus. This allows external programs to update their
configuration when WPS is used to provision new networks.
2009-01-18 12:27:12 +02:00
Jouni Malinen
eca6e0a9a5 WPS: Provide the unparsed Credential attribute to cred_cb()
This makes it easier to pass the credential data to external programs
(e.g., Network Manager) for processing. The actual use of this data is
not yet included in hostapd/wpa_supplicant.
2009-01-17 22:17:12 +02:00
Jouni Malinen
f286077de2 WPS: Ignore credentials for unsupported authentication type
The current implementation does not support WPA/WPA2-Enterprise
credentials. Ignore any credential that is using unsupported
authentication type to avoid potential issues with partially configured
network blocks.
2009-01-17 21:45:51 +02:00
Jouni Malinen
7aab82b3fe Fixed WPS credential conversion to wpa_supplicant configuration
Must not set pairwise_cipher/group_cipher for non-WPA/WPA2 networks
since the configuration parser is going to reject such values. In
addition, should not limit group_cipher to just TKIP or TKIP|CCMP just
in case the AP is using WEP as the group cipher. Default group_cipher
value can be used for all cases.
2009-01-17 21:37:15 +02:00
Jouni Malinen
655e466600 Changed the Network Index value to 1 since that is the default value 2009-01-17 21:14:13 +02:00
Jouni Malinen
98f14041d0 IBSS RSN: Added key configuration 2009-01-17 18:14:41 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
b9a2e577b4 IBSS RSN: Set the PSK based on network configuration 2009-01-17 17:47:25 +02:00
Jouni Malinen
4691fc7bc8 IBSS RSN: Set more hardcoded RSN IEs for now
This allows 4-way handshakes to be completed successfully.
2009-01-17 17:39:57 +02:00
Jouni Malinen
3146b2b961 IBSS RSN: Added couple of required WPA supplicant callback functions 2009-01-17 17:31:21 +02:00
Jouni Malinen
8be1844071 Process received EAPOL frames in IBSS RSN code if in IBSS mode 2009-01-17 17:25:11 +02:00
Jouni Malinen
0d1286e411 Added support for IBSS scanning into driver_test 2009-01-17 16:44:05 +02:00
Jouni Malinen
53895c3b60 Disable per-BSSID authentication for RSN IBSS
RSN IBSS uses authentication per-STA and that is initialized separately,
so there is no need to enable the per-BSS like authentication that is
used with APs.
2009-01-17 16:41:47 +02:00
Jouni Malinen
a5da9c64c9 Save and restore wpa_gui state when session manager restarts the app
This makes wpa_gui remember whether it was only in the tray when the
session was terminated and starts only in the tray if session manager
restarts it automatically.
2009-01-17 13:45:05 +02:00
Jouni Malinen
6fa68a0ee5 Added an option to add (or override) Credential attribute(s) in M8 2009-01-16 22:50:41 +02:00
Jouni Malinen
da3c6a5e2b Fixed auth_send_eapol() to use correct ctx structure 2009-01-16 01:18:11 +02:00
Jouni Malinen
d0fc6e1211 Use a hardcoded RSN IE for testing to start Authenticator
This needs to be replaced with proper RSN IE from the peer STA (e.g.,
from Probe Response).
2009-01-16 01:11:50 +02:00
Jouni Malinen
e2d492dd08 Implement EAPOL sending callbacks for IBSS RSN 2009-01-16 00:56:31 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00
Jouni Malinen
4bb081f1b4 Renamed PMKSA cache functions to avoid duplicate symbols with supplicant
This allows hostapd/pmksa_cache.c and src/rsn_supp/pmksa_cache.c to be
linked into the same program.
2009-01-14 22:01:26 +02:00
Jouni Malinen
13268290b6 Moved rsn_pmkid() into shared code to avoid duplication 2009-01-14 21:31:47 +02:00
Jouni Malinen
676ea3413d eapol_test: Allow generated RADIUS attributes to be replaced
Do not add the automatically generated RADIUS attributes NAS-IP-Address,
Calling-Station-Id, Framed-MTU, NAS-Port-Type, and Connect-Info if -N
option is used with the same attribute type. This allows these
attributes to be replaced without causing duplicate entries.
2009-01-13 21:33:09 +02:00
Dan Williams
8f33641c94 driver_wext: Add IW_ENCODE_TEMP into SIOCSIWENCODE{,EXT} calls
This is needed for airo driver to work correctly and no other driver
seems to care, so the change is safe to make. This has been in number of
distro releases for a long time and no issues have been reported.
2009-01-13 20:42:15 +02:00
Jouni Malinen
540264a721 Removed wpa_sm dereference from pmksa_cache_list() 2009-01-13 20:22:42 +02:00
Jouni Malinen
f5a51b58d4 Moved proto == RSN validation from pmksa_cache.c into the caller 2009-01-13 20:15:06 +02:00
Jouni Malinen
010dc06853 Moved RADIUS Class attribute helpers into RADIUS module 2009-01-13 20:01:29 +02:00
Jouni Malinen
93ea8ed034 Partial fix for test_wpa build 2009-01-13 19:37:22 +02:00
Jouni Malinen
0b8695bb2b Renamed shadowed variable 2009-01-13 19:31:51 +02:00
Jouni Malinen
61e64e7b7f Removed dead code 2009-01-13 19:15:42 +02:00
Jouni Malinen
c77bb61aee Fixed copy-paste error in retry configuration (incorrect ioctl used) 2009-01-13 19:14:38 +02:00
Jouni Malinen
25ba219f3e Removed unused set_regulatory_domain driver function 2009-01-13 19:12:25 +02:00
Jouni Malinen
f49275c92f Fixed build without CONFIG_IEEE80211N 2009-01-12 22:08:53 +02:00
Jouni Malinen
4cdde5caf7 Fixed a typo in printf -> wpa_printf changes 2009-01-12 22:06:51 +02:00
Jouni Malinen
24bb3d9788 Fixed build with wpa_printf disabled 2009-01-12 22:06:06 +02:00
Jouni Malinen
a9843f614f Removed hw_features.o from build if hostapd MLME is not used 2009-01-12 22:03:58 +02:00
Jouni Malinen
7fd46d466f Added build option for disabling control interface (CONFIG_NO_CTRL_IFACE) 2009-01-12 21:44:57 +02:00
Jouni Malinen
30b32314eb Added build option for removing VLAN support (CONFIG_NO_VLAN) 2009-01-12 21:39:19 +02:00
Jouni Malinen
71f04b3cf9 Fixed CONFIG_NO_HOSTAPD_LOGGER build 2009-01-12 21:21:31 +02:00