Commit graph

35 commits

Author SHA1 Message Date
Jouni Malinen
fa0d99c4b2 doc: Document the D-Bus P2P extensions
P2P support was added to the wpa_supplicant D-Bus interface long time
ago, but there has been no attempt of documenting that interface so far.
This commit adds at least a list of new interfaces, methods, properties,
and signals. Some of the incorrect and/or strange parts of the interface
are also identified with bug/todo comments.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
2750d27ebc doc: Document D-Bus WPS property ConfigMethods
This was added a long time ago, but documentation update was forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
fd5768b620 doc: Document missing D-Bus Interface properties
CurrentAuthMode and DisconnectReason have been added a long time ago,
but documentation update was forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
6c45094c0c doc: Document D-Bus BSS properties WPS and Age
These have been added a long time ago, but documentation update was
forgotten.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
9f972b45ca doc: Add D-Bus documentation for Probe Request reporting
Commit 2d43d37ff2 ('DBus: Add ability to
report probe requests') added this capability, but forgot to document
it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
24a97d6ff2 doc: Fix D-Bus documentation for .Network Properties
This propertry is not read-only, i.e., it can also be used to change
configuration parameters for an existing network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-02 22:50:27 +02:00
Jouni Malinen
c35d7923b6 doc: Add D-Bus signals Certification(), EAP(), NetworkRequest()
This documents number of EAP related D-Bus signals and the related
NetworkResponse() method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
ea53bebf47 doc: Add D-Bus FlushBSS() method
Commit 2b65b30da8 ('dbus: Add D-Bus
methods to flush the BSS cache') added this, but forgot to update
documentation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
624b1478be doc: Add D-Bus RemoveAllNetworks() method
Commit 7c49fdd0bd ('dbus: Add
RemoveAllNetworks to the new D-Bus API') added this, but forgot to
document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
f60cc31334 doc: Add D-Bus Reattach() method
Commit 0f44ec8eba ('Add a reattach command
for fast reassociate-back-to-same-BSS') added Reattach(), but forgot to
document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
a46652fe22 doc: Add D-Bus SignalPoll() method
Commit 7a4a93b959 ('dbus: Add SignalPoll()
method to report current signal properties') added this method, but
forgot to document it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
acf0cfde0e doc: Add D-Bus global Capabilities property
This property was added to the fi.w1.wpa_supplicant1 interface in commit
1634ac0654 ('dbus: Add global capabilities
property'), but documentation was not updated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:06 +02:00
Jouni Malinen
545d282df0 doc: Fix D-Bus documentation for CreateInterface()
The "Bridge_ifname" parameter had been renamed to "BridgeIfname" and
"ConfigFile" is also available as a parameter.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
9a15420a63 doc: Fix D-Bus page format with newer Doxygen versions
It looks like the space indentation before the HTML command ended up
being converted to HTML tags getting shown as code text rather than
being used to control formatting. Fix this by removing indentation from
the first line of each HTML segment.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Fionn Cleary
efd11c02ca Add reassociate command to dbus doxygen
Signed-off-by: Fionn Cleary <fionn.cleary@streamunlimited.com>
2014-04-11 19:22:00 +03:00
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Paul Stewart
ca9c14fb0a dbus_new: Add documentation for D-Bus TDLS methods
Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-20 16:39:34 +02:00
Dan Williams
c23eea8867 doc: Update D-Bus docs for Scan()'s new AllowRoam option
Signed-hostap: Dan Williams <dcbw@redhat.com>
2013-10-23 00:44:23 +03:00
Chengyi Zhao
8a901d750b D-Bus: Emit signal when a station is authorized or deauthorized
Add "StaAuthorized" and "StaDeauthorized" D-Bus interface in AP mode.
After enabling the AP mode of wpa_supplicant, the other process need to
get the MAC address and authorization status of every station, so
wpa_supplicant emits signal when the station is authorized or
deauthorized.

Signed-hostap: Chengyi Zhao <chengyix.zhao@gmail.com>
2013-06-22 12:09:09 +03:00
Paul Stewart
754632c965 dbus_new: Add EAP logon/logoff
Add "EAPLogoff" and "EAPLogon" interface DBus commands which
parallel the "logoff" and "logon" wpa_ctrl commands which terminate
and restart EAP authentication.  Slightly enhance the "logon" case
by expiring any running "startWhile" timer.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-04-23 17:57:55 +03:00
Tomasz Bursztyka
67892d5c0d D-Bus: Add AutoScan interface method to set/unset autoscan parameters
Signed-hostap: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2012-06-26 19:05:09 +03:00
Mukesh Agrawal
c6e86b63d2 Create DBus getter/setter for ScanInterval
Enable control of wpa_s->scan_interval via D-Bus. This parameter
controls the delay between successive scans for a suitable AP.

Also, update dbus.doxygen with ScanInterval, and some other
parameters that were undocumented.

Signed-hostap: Mukesh Agrawal <quiche@chromium.org>
2012-04-01 18:05:22 +03:00
Witold Sowa
c56ce48a6f dbus: Add new KeyMgmt interface capabilities
Add "wpa-ft-psk", "wpa-psk-sha256", "wpa-ft-eap" and "wpa-eap-sha256"
possible KeyMgmt values of interface capabilities to fit values in
BSS RSN options dictionary.
2010-04-11 21:37:28 +03:00
Witold Sowa
7899e2f42d dbus: Change WPA/RSNIE byte array props to dicts
Expose RSN and WPA properties for BSS objects containing information
about key management and cipher suites. Get rid of WPA/RSN/WPSIE
byte array properties and add IEs byte array property with all IE data
instead.
2010-01-16 16:37:37 +02:00
Witold Sowa
8e5568f874 dbus: Change BSS, Network and some errors interface names
Remove ".Interface" part from BSS and Network objects and some
error names.
2010-01-09 11:41:09 +02:00
Jouni Malinen
1269489564 dbus: Document BSS PropertiesChanged signal 2010-01-06 20:06:11 +02:00
Witold Sowa
75d328af50 dbus: Change BSS property MaxRate to Rates
Instead of exposing maximum BSS bit rate, expose sorted array
of all supported rates.
2010-01-04 16:52:30 +02:00
Marcel Holtmann
27f43d8de5 dbus: Replace StateChanged with PropertiesChanged signal
The actual supplicant state is exposed via a property on the interface
object. So having a separate signal StateChanged for notifying about
changes is a bad idea. The standard PropertiesChanged signal should be
used for this.

The advantage of StateChanged signal was that it includes the previous
state, but not even NetworkManager is making use of this. And tracking
the old state via the property and this signal is easily possible anyway.
2010-01-04 16:33:44 +02:00
Marcel Holtmann
a2753c285f dbus: Use simple strings for debug level
Instead of using some magic integer values that really only mean
something to WPA internal code, just use simple strings. Possible
values are "msgdump", "debug", "info", "warning" and "error" which
map directly to WPA debugging support.
2010-01-04 16:22:26 +02:00
Jouni Malinen
2ea856aab6 dbus: Document DebugLevel values 2010-01-01 23:17:07 +02:00
Jouni Malinen
d89530f776 Fix a typo in doxygen specification 2010-01-01 22:15:32 +02:00
Witold Sowa
db9133acb2 dbus: Divide DebugParams property to three separate properties 2010-01-01 13:00:22 +02:00
Witold Sowa
e376f1193b dbus: Add second properties arg to *Added signals
Add a dictionary argument containing all properties of the newly added
object to BSSAdded, NetworkAdded, and InterfaceAdded signals.
2010-01-01 12:47:59 +02:00
Witold Sowa
58605c6e61 dbus: Replace BSS 'Properties' property with separate properties
In addition, remove Quality and Noise properties since the BSS table
is not the correct place for fetching per-channel information (Noise)
and Quality is not well-defined (nor available from many drivers).
2010-01-01 12:28:24 +02:00
Jouni Malinen
612bb5163d Import http://student.agh.edu.pl/~wsowa/new-dbus-api.html
Import D-Bus API reference into Doxygen documentation for
wpa_supplicant.
2009-12-26 19:54:24 +02:00