Commit graph

7632 commits

Author SHA1 Message Date
Bob Copeland
c50d94f1f8 mesh: Start mesh peering after successful authentication
[original patch by: Thomas Pedersen <thomas@noack.us>]
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-11-16 19:43:11 +02:00
Bob Copeland
e96da42b0e SAE: Enhance AP implementation to handle auth for mesh interfaces
Add state transition logic to the SAE frame handling in order to more
fully implement the state machine from the IEEE 802.11 standard. Special
cases are needed for infrastructure BSS case to avoid unexpected
Authentication frame sequence by postponing transmission of the second
Authentication frame untile the STA sends its Confirm.

[original patch by: Thomas Pedersen <thomas@noack.us>]
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-11-16 19:43:11 +02:00
Thomas Pedersen
0f950df029 mesh: Add mesh robust security network
This implementation provides:

- Mesh SAE authentication mechanism
- Key management (set/get PSK)
- Cryptographic key establishment
- Enhanced protection mechanisms for robust management frames

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-11-16 19:43:06 +02:00
Dmitry Shmidt
88cb27c7a5 hostapd: Add wowlan_triggers config param
New kernels in wiphy_suspend() will call cfg80211_leave_all() that will
eventually end up in cfg80211_stop_ap() unless wowlan_triggers were set.
For now, use the parameters from the station mode as-is. It may be
desirable to extend (or constraint) this in the future for specific AP
mode needs.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-16 17:09:11 +02:00
Ilan Peer
f03996565a nl80211: Fix Android compilation by adding include for fcntl.h
This is needed for fcntl() at least with Android KK.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-16 17:09:11 +02:00
Jouni Malinen
b652daca84 tests: Suite B
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
929a2ea5df Suite B: Select EAPOL-Key integrity and key-wrap algorithms based on AKM
This adds support for AKM 00-0F-AC:11 to specify the integrity and
key-wrap algorithms for EAPOL-Key frames using the new design where
descriptor version is set to 0 and algorithms are determined based on
AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
087a1f4efd Suite B: PMKID derivation for AKM 00-0F-AC:11
The new AKM uses a different mechanism of deriving the PMKID based on
KCK instead of PMK. hostapd was already doing this after the KCK had
been derived, but wpa_supplicant functionality needs to be moved from
processing of EAPOL-Key frame 1/4 to 3/4 to have the KCK available.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
eec0cc8da2 tests: Clear ignore_old_scan_res setting
This parameter was used in some of the NFC test cases to make scanning
more robust in case of changing AP configuration. However, the parameter
was not cleared anywhere, so it could have been left in use for other
test cases as well. To get more consistent behavior, clear the value
back to its default between test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-15 12:56:02 +02:00
Jouni Malinen
35efa2479f OpenSSL: Allow TLS v1.1 and v1.2 to be negotiated by default
Use SSLv23_method() to enable TLS version negotiation for any version
equal to or newer than 1.0. If the old behavior is needed as a
workaround for some broken authentication servers, it can be configured
with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1".

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-15 12:35:10 +02:00
Andrei Otcheretianski
281ff42a01 EAP-IKEv2: Fix compilation warning
Fix signed/unsigned comparison compilation warning introduced in
08ef442 "EAP-IKEv2: Fix the payload parser".

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-11-15 11:41:09 +02:00
Dmitry Shmidt
d10792199e Add CTRL-EVENT-SCAN-FAILED notification in case of scan failure
This is needed since the SCAN command with radio work returns before the
actual driver operation to trigger a scan has been executed and as such,
cannot return result of that operation.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-11-15 11:03:52 +02:00
Jouni Malinen
9f6a7cddc4 Work around AP misbehavior on EAPOL-Key descriptor version
It looks like some APs are incorrectly selecting descriptor version 3
(AES-128-CMAC) for EAPOL-Key frames when version 2 (HMAC-SHA1) was
expected to be used. This is likely triggered by an attempt to negotiate
PMF with SHA1-based AKM.

Since AES-128-CMAC is considered stronger than HMAC-SHA1, allow the
incorrect, but stronger, option to be used in these cases to avoid
interoperability issues with deployed APs.

This issue shows up with "WPA: CCMP is used, but EAPOL-Key descriptor
version (3) is not 2" in debug log. With the new workaround, this issue
is ignored and "WPA: Interoperability workaround: allow incorrect
(should have been HMAC-SHA1), but stronger (is AES-128-CMAC), descriptor
version to be used" is written to the log.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-14 21:01:13 +02:00
Jouni Malinen
9128f520c3 tests: PMF required with SHA1-based AKM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-14 20:56:43 +02:00
Yanbo Li
e3a8ad4405 hostapd: Change drv_flags from unsigned int to u64
Some flag already using a bit larger than 32, so extend the hostapd
drv_flags type similarly to the earlier wpa_supplicant change to get the
full flag content.

Signed-off-by: Yanbo Li <yanbol@qti.qualcomm.com>
2014-11-14 12:55:53 +02:00
Jouni Malinen
41a233572e Assign QCA vendor specific nl80211 command id 52 for APFIND
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-11-13 16:27:23 +02:00
Jouni Malinen
2a6cce3842 tests: DFS with chanlist
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:56:44 +02:00
Jouni Malinen
68ee1cdca0 Remove unused EVENT_MLME_RX
This was used in driver_test.c, but that driver wrapper has been removed
and there are no remaining or expected users for EVENT_MLME_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:31:23 +02:00
Jouni Malinen
0f812c993b Remove unused EVENT_FT_RRB_RX
This was used in hostapd driver_test.c, but that driver wrapper has been
removed and there are no remaining or expected users for
EVENT_FT_RRB_RX.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 19:27:48 +02:00
Ilan Peer
006a1c4d3b tests: Make vm-run.sh arguments non-positional
This was currently breaking parallel-run.*, as it was passing
--split num/num parameters (intended for rnu-tests.py)
to vm-run.sh which broke the --codecov and --timewrap options.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:55:23 +02:00
Ilan Peer
40c57fa88f tests: Update vm README
Update the code coverage documentation to also specify the
source base directory for the code coverage generation.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
6e04f41168 tests: Add usage() to run-all.sh
The -h or --help command line arguments can now be used to request usage
information for run-all.sh.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
5d60296ea7 tests: Add option to build before running all tests
Add an option --build to run-all.sh to build before starting to run all
the tests. In addition, add an option --codecov to extract the code
coverage data at the end of the run.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Ilan Peer
a7fe868dae tests: Make run-all.sh arguments non-positional
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2014-11-01 17:08:29 +02:00
Jouni Malinen
ee231fdb2b Remove completed to-do items
While this file has not really been updated in years, some of the
completed items can easily be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:24:36 +02:00
Jouni Malinen
01b32d5e36 Remove references to madwifi from various files
Number of documentation and configuration files had references to the
madwifi driver interface that was removed in the previous commit. Remove
these references as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:15:53 +02:00
Jouni Malinen
f21495ad38 madwifi: Remove obsolete madwifi driver interface
The MadWifi project is not active anymore and the last release happened
in early 2008. As such, there is no remaining justification for
maintaining the madwifi-specific driver interface for hostapd either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-01 16:15:29 +02:00
Slava Monich
c66f23491e dbus: Fix memory leak in wpas_dbus_getter_bss_wps
Signed-off-by: Slava Monich <slava.monich@jolla.com>
2014-11-01 15:56:14 +02:00
Martin Kletzander
6721909fb1 wpa_gui: Use dialog window type
This helps window managers treat the window properly. Mostly tiling WMs
are affected by this. All other windows inherit this option from QDialog
already.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-01 15:55:49 +02:00
Jouni Malinen
96a6c4c098 tests: Concurrent station mode scan and p2p_find with P2P Device
This verifies that station mode interface SCAN command gets executed if
P2P Device instance is running p2p_find.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Jouni Malinen
70892f697f tests: P2P_STOP_FIND/P2P_FLUSH to ignore new results
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Sunil Dutt
477b082cc4 P2P: Do not consider the p2p_scan results after p2p_stop_find
If p2p_stop_find is issued after the p2p_scan request is triggered to
the host driver, the obtained scan results are also considered to update
the P2P peer entries. This is not always desired behavior, i.e., it can
be clearer if no P2P-DEVICE-FOUND events are generated based of that
final pending scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Jouni Malinen
b5ea99377f P2P: Document p2p_in_progress() return value 2
Function documentation was not in sync with the implementation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:50:01 +02:00
Sunil Dutt
e7ce540239 P2P: Delay scan operation only when P2P is not in search state
With the radio work interface in place, station interface SCAN command
was not scheduled (i.e., it got continously delayed with "Delay station
mode scan while P2P operation is in progress") when a p2p_find was
operational. Fix this be delaying station mode scan only when a P2P
operation is in progress, but not in search state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:49:14 +02:00
Sunil Dutt
b951a97454 P2P: Set p2p_scan_running based on driver scan request result
With the radio work interface, the actual request to start p2p_scan
operation is scheduled from a radio work and hence the initial return
value cannot provide the real result of the driver operation to trigger
a scan. Introduce a new notification API to indicate the scan trigger
status based on which the p2p_scan_running instance can be set using the
real return value from the driver operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-31 00:05:25 +02:00
Jouni Malinen
43d8592718 MACsec: Fix policy configuration
macsec_validate variable was set incorrectly to FALSE(0) or TRUE(1)
instead of the enum validate_frames values (Disabled(0), Checked(1),
Strict(2). This ended up policy == SHOULD_SECURE to be mapped to
macsec_validate == Checked instead of Strict. This could have resulted
in unintended SecY forwarding of invalid packets rather than dropping
them.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-30 11:43:47 +02:00
Jouni Malinen
8c00fd00cd P2P: Clean up p2p_go_neg_failed() calls
This function is always called with the peer argument equal to
p2p->go_neg_peer, so there is no need for that argument to be there. In
addition, p2p->go_neg_peer is not NULL in cases where there is an
ongoing GO Negotiation, so the function can be simplified to just check
once whether the peer pointer is set and if not, skip all processing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-29 13:04:09 +02:00
Jouni Malinen
0ee41e866c tests: GO Negotiation and timeout while waiting for peer
grpform_cred_ready_timeout2 is similar to the grpform_cred_ready_timeout
test case with the difference being in initiating a P2P_FIND operation
during the wait.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-29 12:52:51 +02:00
Rashmi Ramanna
0c6eee8b75 P2P: Use timer to fail GO Negotation while waiting for peer
The timeout check while waiting for the peer to accept the GO
Negotiation depended on the WAIT_PEER_IDLE or WAIT_PEER_CONNECT states
being in use. Any P2P command to alter such states would have resulted
in the failure to time out GO Negotiation and thus ended up in not
indicating GO Negotiation failure or left the selected peer available
for new GO negotiation after the expected two minute timeout.

Fix this by using a separate timer to time out GO Negotiation
irrespective of the P2P state.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-29 12:50:32 +02:00
Jouni Malinen
4fb26cee95 tests: Remove ap_ht40_csa and ap_ht40_csa3 workarounds
The issue in mac80211 was identified and proposed fix is now available,
so remove the workaround here and start reporting failures from
unexpected disconnection during CSA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 14:01:16 +02:00
Jouni Malinen
3586d55a5d P2P: Do not call wpas_p2p_disconnect_safely() if no match is found
In theory, wpas_p2p_disconnect_safely() could have dereferenced the
wpa_s == NULL argument, but in practice, it won't due to the
calling_wpa_s == wpa_s check and wpas_p2p_disconnect() accepting NULL.
Anyway, it is cleaner to add an explicit check for this. (CID 74492)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 01:50:22 +02:00
Jouni Malinen
10bbe8b8ed nl80211: Fix a copy-paste error in key offload management
Commit b41f26845a ('Add support for
offloading key management operations to the driver') used incorrect
variable for determining the KCK length. This does not get triggered in
normal use cases since KCK and KEK are always included and of the same
length (in currently supported key management cases). Anyway, this needs
to be fixed to check the correct attribute. (CID 74491)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-28 01:41:57 +02:00
Kyeyoon Park
7d597d4617 AP: Add support for Proxy ARP, DHCP snooping mechanism
Proxy ARP allows the AP devices to keep track of the hardware address to
IP address mapping of the STA devices within the BSS. When a request for
such information is made (i.e., ARP request, Neighbor Solicitation), the
AP will respond on behalf of the STA device within the BSS. Such
requests could originate from a device within the BSS or also from the
bridge. In the process of the AP replying to the request (i.e., ARP
reply, Neighbor Advertisement), the AP will drop the original request
frame. The relevant STA will not even know that such information was
ever requested.

This feature is a requirement for Hotspot 2.0, and is defined in IEEE
Std 802.11-2012, 10.23.13. While the Proxy ARP support code mainly
resides in the kernel bridge code, in order to optimize the performance
and simplify kernel implementation, the DHCP snooping code was added to
the hostapd.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
6897556455 common: Add definition for ETH_HLEN
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
7565752d47 AP: Add support for setting bridge network parameter
This allows setting a network parameter on the bridge that the BSS
belongs to.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
73d2294fbe AP: Add support for setting bridge port attributes
This allows setting a bridge port attribute. Specifically, the bridge
port in this context is the port to which the BSS belongs.

This commit adds the needed functionality in driver_nl80211.c for the
Linux bridge implementation. In theory, this could be shared with
multiple Linux driver interfaces, but for now, only the main nl80211
interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
71103bed42 AP: Add support for IPv4 neighbor entry management to the BSS bridge
This allows adding/deleting an IPv4 neighbor entry to/from the bridge,
to which the BSS belongs. This commit adds the needed functionality in
driver_nl80211.c for the Linux bridge implementation. In theory, this
could be shared with multiple Linux driver interfaces, but for now, only
the main nl80211 interface is supported.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
6c6678e7a4 nl80211: Make br_ifindex available in i802_bss
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00
Kyeyoon Park
7d20dd66f3 l2_packet: Add support for DHCP packet filter in l2_packet_linux
Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-28 01:08:29 +02:00