Commit graph

14955 commits

Author SHA1 Message Date
Jouni Malinen
c38c62ff78 wlantest: Derive PMK-R1 and PTK for FT protocol cases
Track PMK-R0/PMK-R0-Name from the initial mobility domain association
and derive PMK-R1/PTK when the station uses FT protocol. This allows
frames from additional roaming cases to be decrypted.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-22 22:14:47 +03:00
Jouni Malinen
dbddbf1647 tests: Configure wlantest for FT+PMF test cases
It is useful to get the encrypted frames decrypted in the sniffer
capture for these test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-22 22:13:02 +03:00
Jouni Malinen
4619dc0607 tests: EAP-TEAP with machine username/password credential
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
c41936566e EAP-TEAP peer: Add support for machine authentication
This allows a separate machine credential to be used for authentication
if the server requests Identity-Type = 2 (machine).

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
c724a0a16c EAP peer: Add a concept of a separate machine credential
This is an initial step in adding support for configuring separate user
and machine credentials. The new wpa_supplicant network profile
parameters machine_identity and machine_password are similar to the
existing identity and password, but explicitly assigned for the purpose
of machine authentication.

This commit alone does not change actual EAP peer method behavior as
separate commits are needed to determine when there is an explicit
request for machine authentication. Furthermore, this is only addressing
the username/password credential type, i.e., additional changes
following this design approach will be needed for certificate
credentials.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 13:24:14 +03:00
Jouni Malinen
0b39274ca3 tests: Update authsrv_oom to match implementation changes
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:59:06 +03:00
Jouni Malinen
9ce3bfaf47 RADIUS server: Abort startup on allocation failures
Be more consistent on checking all parameter allocation and copying
steps within radius_server_init() and abort startup if anything fails
instead of trying to continue with other parts of the configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:57:58 +03:00
Jouni Malinen
fa1f0751cc RADIUS server: Use struct eap_config to avoid duplicated definitions
Use struct eap_config as-is within RADIUS server to avoid having to
duplicate all the configuration variables at each interface. This
continues cleanup on struct eap_config duplication in hostapd.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:33:12 +03:00
Jouni Malinen
a00cb1b1f5 EAP-TEAP server: Fix eap_teap_pac_no_inner configuration
This was not passed correctly to the EAP server code when using hostapd
internal EAP server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00
Jouni Malinen
986033ff3d EAP-TEAP server: Fix Crypto-Binding check in PAC no-inner-auth case
The Crypto-Binding TLV is included without Intermediate-Result TLV in
this sequence since the server is skipping all inner authentication
methods and is only sending out Result TLV with the Crypto-Binding TLV.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00
Jouni Malinen
10e105230a tests: EAP-TEAP Identity-Type
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00
Jouni Malinen
e54cfbb56a EAP-TEAP server: Allow a specific Identity-Type to be requested/required
The new hostapd configuration parameter eap_teap_id can be used to
configure the expected behavior for used identity type.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 02:13:22 +03:00
Jouni Malinen
f186ec54c3 EAP-TEAP peer: Support Identity-Type TLV
Parse the received Identity-Type TLV and report the used Identity-Type
in response if the request included this TLV. For now, only the
Identity-Type 1 (User) is supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 01:46:00 +03:00
Jouni Malinen
cc661c160a EAP-TEAP: Add parsing and generation routines for Identity-Type TLV
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-20 01:34:12 +03:00
Jouni Malinen
d11c41bb75 tests: sigma_dut controlled SAE association and FT-over-DS
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-20 00:15:20 +03:00
Jouni Malinen
5a7af3a32c tests: sigma_dut controlled AP FT-PSK (over-DS)
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-19 23:54:29 +03:00
Jouni Malinen
a5ffe45908 tests: Make mbo_cell_capa_update_pmf more robust
Wait for hostapd to report completion of connection so that the WNM
Notification Request frame does not get sent before the AP has processed
EAPOL-Key msg 4/4 and configured the TK. This could result in a race
condition especially when testing using UML with time-travel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-19 17:22:41 +03:00
Jouni Malinen
35337b448a tests: sigma_dut and initial UOSC with TOD-STRICT/TOFU
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-19 16:57:55 +03:00
Jouni Malinen
100b2edb28 OpenSSL: Write peer certificate chain details in debug log
This makes it more convenient to debug TLS certificate validation
issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-19 16:34:22 +03:00
Jouni Malinen
e6edadba86 tests: ap_wpa2_eap_too_many_roundtrips to use shorter fragment
This is needed with the increased maximum EAP round limit since the
server side sends out longer messages in this exchange and that prevent
the short message limit from being reached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-18 17:46:34 +03:00
Jouni Malinen
7eb157f1e9 EAP: Increase the maximum number of message exchanges
Allow 100 rounds of EAP messages if there is data being transmitted.
Keep the old 50 round limit for cases where only short EAP messages are
sent (i.e., the likely case of getting stuck in ACK loop).

This allows larger EAP data (e.g., large certificates) to be exchanged
without breaking the workaround for ACK loop interop issues.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-18 17:40:31 +03:00
Jouni Malinen
0bcd9839bf tests: Update authsrv_oom match changed implementation
Need to take into account the additional memory allocation within
radius_server_init().

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-18 17:40:31 +03:00
Jouni Malinen
822e7c66ae EAP server: Use struct eap_config to avoid duplicated definitions
Use struct eap_config as-is within struct eap_sm and EAPOL authenticator
to avoid having to duplicate all the configuration variables at each
interface. Split the couple of session specific variables into a
separate struct to allow a single const struct eap_config to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-18 17:36:32 +03:00
Jouni Malinen
8315c1ef5b tests: Vendor EAP method in Phase 2
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:18:33 +03:00
Jouni Malinen
62af2b18f7 EAP-TEAP peer: Support vendor EAP method in Phase 2
The implementation was previously hardcoded to use only the non-expanded
IETF EAP methods in Phase 2. Extend that to allow vendor EAP methods
with expanded header to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:18:21 +03:00
Jouni Malinen
aba8dc82fc EAP-PEAP server: Support vendor EAP types in Phase 2
This was already allowed with EAP-PEAP, but EAP-TEAP was hardcoded to
use only the non-expanded EAP types. Extend that to allow vendor EAP
types to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:17:42 +03:00
Jouni Malinen
357c1062dc EAP-FAST peer: Support vendor EAP method in Phase 2
The implementation was previously hardcoded to use only the non-expanded
IETF EAP methods in Phase 2. Extend that to allow vendor EAP methods
with expanded header to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:16:55 +03:00
Jouni Malinen
f32f76231e EAP-FAST server: Support vendor EAP types in Phase 2
This was already allowed with EAP-PEAP, but EAP-FAST was hardcoded to
use only the non-expanded EAP types. Extend that to allow vendor EAP
types to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:15:57 +03:00
Jouni Malinen
887d8703bb EAP-PEAP peer: Support vendor EAP method in Phase 2
The implementation was previously hardcoded to allow only the Microsoft
SoH expanded EAP method in Phase 2 in addition to non-expanded EAP
methods. Extend that to allow any vendor EAP method with an expanded
header to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:15:02 +03:00
Jouni Malinen
f2ef4f2550 EAP peer: Allow VENDOR-TEST method in Phase 2
This allows EAP methods to be tested for support of expanded EAP headers
in Phase 2.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:14:58 +03:00
Jouni Malinen
5ddbd9e968 EAP-TTLS peer: Support vendor EAP method in Phase 2
The implementation was previously hardcoded to use only the non-expanded
IETF EAP methods in Phase 2. Extend that to allow vendor EAP methods
with expanded header to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:14:56 +03:00
Jouni Malinen
5e94e7f23d EAP-TTLS server: Support vendor EAP types in Phase 2
This was already allowed with EAP-PEAP, but EAP-TTLS was hardcoded to
use only the non-expanded EAP types. Extend that to allow vendor EAP
types to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 16:14:02 +03:00
Jouni Malinen
5f2301a6da Replace EapType typedef with enum eap_type
This cleans up coding style of the EAP implementation by avoiding
typedef of an enum hiding the type of the variables.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 11:36:20 +03:00
Jouni Malinen
542913943e tests: EAP-TEAP and separate message for Result TLV
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
76ddfae6eb EAP-TEAP server: Testing mechanism for Result TLV in a separate message
The new eap_teap_separate_result=1 hostapd configuration parameter can
be used to test TEAP exchange where the Intermediate-Result TLV and
Crypto-Binding TLV are send in one message exchange while the Result TLV
exchange in done after that in a separate message exchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
4c327146f0 EAP-TEAP peer: Allow Result TLV without Crypto-Binding TLV
If the Crypto-Binding TLV for the last EAP method has been validated
successfully in a previous message exchange with Intermediate-Result TLV
and no new EAP method has been started, Result TLV can be accepted
without an additional Crypto-Binding TLV. This allows the server to go
through additional message exchanges after inner EAP method, if needed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
128d46be9f EAP-TEAP: Add parsing of Error TLV
This TLV needs to be processed properly instead of NAK'ed as
unsupported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
234489efd1 EAP-TEAP server: Require Intermediate-Result TLV even with Result TLV
It is not sufficient for the peer to include only the Result TLV if the
server included both the Intermediate-Result TLV and Result TLV.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-17 00:08:47 +03:00
Jouni Malinen
0f7c91f2b9 EAP-TEAP peer: Add Intermediate-Result TLV with Crypto-Binding TLV
Previously, only the Result TLV was added when writing Crypto-Binding
TLV response. This is not sufficient, since RFC 7170 require
Intermediate-Result TLV response to be included from the peer if the
server included Intermediate-Result TLV.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-16 23:11:28 +03:00
Jouni Malinen
a66e53c419 EAP-TEAP: Fix TLS-PRF for TLS ciphersuites that use SHA384
These need to be using the HMAC-based TLS-PRF with SHA384 instead of
SHA256 as the hash algorithm.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-16 21:16:44 +03:00
Jouni Malinen
52069c7eff Add TLS-PRF using HMAC with P_SHA384 for TEAP
This version of TLS PRF is needed when using TEAP with TLS ciphersuites
that are defined to use SHA384 instead of SHA256.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-08-16 21:16:37 +03:00
Jouni Malinen
263c0cbdc0 tests: sigma_dut with TOD-TOFU
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 16:40:36 +03:00
Jouni Malinen
b02f0f88fb tests: TOD-TOFU policy reporting
Also rename the previously added test case to use the TOD-STRICT name
for the earlier policy OID.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 16:40:36 +03:00
Jouni Malinen
eec147dccb tests: Update RSA 3k certificates before the previous ones expire
In addition, update the generation script to allow convenient update of
the server and user certificates without having to generate new keys.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 16:40:36 +03:00
Jouni Malinen
b1dfe96ae1 tests: Add a server certificate with TOD-TOFU policy
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 16:40:36 +03:00
Jouni Malinen
a647a0ad75 Extend server certificate TOD policy reporting to include TOD-TOFU
The previously used single TOD policy was split into two policies:
TOD-STRICT and TOD-TOFU. Report these separately in the
CTRL-EVENT-EAP-PEER-CERT events (tod=1 for TOD-STRICT and tod=2 for
TOD-TOFU).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 16:40:31 +03:00
Sunil Dutt
346d10cf82 SAE: Conditionally set PMKID while notifying the external auth status
This is needed for the drivers implementing SME to include the PMKID in
the Association Request frame directly following SAE authentication.

This commit extends the commit d2b2083843 ("SAE: Allow PMKID to be
added into Association Request frame following SAE") for drivers with
internal SME that use the external authentication mechanism.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:37:36 +03:00
Sunil Dutt
b7cd64876d SAE: Use BSSID stored in ext_auth_bssid for set_pmk
pending_bssid is cleared in the connected state and thus is not valid if
SAE authentication is done to a new BSSID when in the connected state.
Hence use the BSSID from ext_auth_bssid while configuring the PMK for
the external authentication case. This is required for roaming to a new
BSSID with driver-based-SME while the SAE processing happens with
wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:32:55 +03:00
Sunil Dutt
e0b331d896 OWE: Update connect params with new DH attributes to the driver
A new DH public key is sent through this interface to the driver after
every successful connection/roam to a BSS. This helps to do OWE roaming
to a new BSS with drivers that implement SME/MLME operations during
roaming.

This updated DH IEs are added in the subsequent (Re)Association Request
frame sent by the station when roaming. The DH IE from the roamed AP is
given to wpa_supplicant in the roam result event. wpa_supplicant shall
further process these DH IEs to generate the PMK for the 4-way
handshake.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:31:10 +03:00
Sunil Dutt
c574a3ff18 nl80211: Request update connection params only for drivers with SME
Update Connection Params is intended for drivers that implement
internal SME and expect these updated connection params from
wpa_supplicant. Do not send this request for the drivers using
SME from wpa_supplicant.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-08-16 15:26:18 +03:00