Commit graph

12948 commits

Author SHA1 Message Date
Jouni Malinen
77f52098a5 tests: Make sae_invalid_anti_clogging_token_req more robust
Beacon more frequently since Probe Request frames are practically ignored
in this test setup (ext_mgmt_frame_handled=1 on hostapd side) and
wpa_supplicant scans may end up getting ignored if no new results are
available due to the missing Probe Response frames.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-22 17:21:57 +03:00
Michael Baird
5f7c9e50f5 EAP server: Add event messages for more EAP states
While using an external RADIUS server SUCCESS messages were not being
sent (internal was fine). Also add event messages for other states that
others might find useful, and consistency between the two.

Signed-off-by: Michael Baird <Michael.Baird@ecs.vuw.ac.nz>
2017-10-21 20:28:46 +03:00
Johannes Berg
18cdbb3c80 tests: Add a script to aid bisecting Linux kernel with hwsim VM
I find myself writing a version of this script every now and
then, but there's little point in that - just add one to the
tree so we can use it again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-21 12:04:53 +03:00
andrekorol
a68e0d869f Fix a typo in a comment (the variable is ptk, not pkt)
Signed-off-by: Andre Rossi Korol <anrobits@yahoo.com.br>
2017-10-21 12:02:54 +03:00
Janusz Dziedzic
de41b960b6 wpa_supplicant: Increase UDP control interface RX buffer
Seems like some test cases, e.g., ap_wpa2_psk_ext_retry_msg_3c, require
larger buffer than 256 bytes.

In other case I fail such test cases when run on real HW and using:
CONFIG_CTRL_IFACE=udp-remote

Increase the RX buffer from 256 to 4096 bytes to match the other control
interface cases.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
2017-10-21 12:00:57 +03:00
Jouni Malinen
f81c1411f3 tests: WPA2-EAP-FT AP (pull PMK) - wildcard R0KH/R1KH
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-21 12:00:22 +03:00
Jouni Malinen
20a09e08cc tests: hostapd configuration reload modification from file on SIGHUP
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-21 11:29:45 +03:00
Ben Greear
74e55b6585 Fix test build breakage when not compiling with mesh support
Build breakage was introduced by commit
16579769ff ('Add testing functionality for
resetting PN/IPN for configured keys') for some CONFIG_TESTING_OPTIONS=y
builds.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2017-10-21 10:59:15 +03:00
Jouni Malinen
60890ca4ee tests: Delayed PTK rekey exchange attack protection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-20 20:32:37 +03:00
Jouni Malinen
6e3027a57e Fix the notes on EAPOL-Key testing procedures
The extra sanity check for replay protection in these procedures ended
up breaking the tests. RESET_PN cannot be used before RESEND_* commands
since that would prevent the DUT from accepting the retransmitted
EAPOL-Key frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-20 20:32:36 +03:00
Jouni Malinen
3d0fb95583 WNM: Ignore BSS Transition Management frames in bss_transition=0 case
The hostapd bss_transition parameter was previously used to control
advertisement of BSS Transition Management support, but it was not used
when processing BSS Transition Management Query/Response frames. Add an
explicit check during frame processing as well so that any misbehaving
station is ignored. In addition to bss_transition=1, allow mbo=1 to be
used to mark the functionality enabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-20 20:32:36 +03:00
Jouni Malinen
d903716976 tests: Enable bss_transition in wnm_bss_tm_req_with_mbo_ie
This is needed once BSS TM processing is skipped if the functionality is
not enabled explicitly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-20 20:32:36 +03:00
Jouni Malinen
114f2830d2 WNM: Ignore WNM-Sleep Mode Request in wnm_sleep_mode=0 case
The hostapd wnm_sleep_mode parameter was previously used to control
advertisement of WNM-Sleep Mode support, but it was not used when
processing a request to use WNM-Sleep Mode. Add an explicit check during
request processing as well so that any misbehaving station is ignored.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-20 17:39:42 +03:00
Jouni Malinen
c9dc89968d tests: Skip new ap_ciphers tests cleanly for missing mac80211 debugfs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-19 23:32:26 +03:00
Jouni Malinen
1613e0121c Add notes on how to do cipher suite and key management testing
This describes how various wpa_supplicant/hostapd extensions can be used
to test IEEE 802.11 functionality in other devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-19 20:47:44 +03:00
Jouni Malinen
fd1b15aca3 tests: CCMP/TKIP/GCMP replay protection
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-19 20:47:44 +03:00
Jouni Malinen
862363babe tests: Plaintext EAPOL-Key frames when TK is configured
These test cases do not really verify any specific DUT behavior
automatically, i.e., these are here to generate sniffer captures for
manual analysis.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-19 18:32:16 +03:00
Jouni Malinen
3d6953288b Extend RESEND_* test commands to allow forcing plaintext TX
This allows hostapd testing functionality to be forced to send out a
plaintext EAPOL-Key frame with the RESEND_* command. That can be useful
in seeing how the station behaves if an unencrypted EAPOL frame is
received when TK is already configured.

This is not really perfect since there is no convenient way of sending
out a single unencrypted frame in the current nl80211 design. The
monitor interface could likely still do this, but that's not really
supposed to be used anymore. For now, clear and restore TK during this
operation. The restore part is not really working correctly, though,
since it ends up clearing the TSC value on the AP side and that shows up
as replay protection issues on the station. Anyway, this is sufficient
to generate sniffer captures to analyze station behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-19 18:32:16 +03:00
Jouni Malinen
4be5bc98a8 DPP: Update AES-SIV AD for PKEX frames
The protocol design was updated to protect the six octets in the header
before the attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-19 18:32:16 +03:00
Jouni Malinen
dc4d271c6d DPP: Update AES-SIV AD for DPP Authentication frames
The protocol design was updated to protect the six octets in the header
before the attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 22:51:30 +03:00
Jouni Malinen
4bb2272bab tests: Delayed M1+M3 retransmission and zero TK
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-18 11:28:55 +03:00
Jouni Malinen
59cbfa7c86 tests: Delayed 4-way handshake M1 and M3 retransmission
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-18 11:27:38 +03:00
Jouni Malinen
724152a1ef tests: Delayed group M1 retransmission
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-18 11:25:27 +03:00
Jouni Malinen
8e5931f0c7 tests: More robust owe_transition_mode* tests
Flush old scan results in these test cases to avoid checking incorrect
scan result entry.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 01:19:42 +03:00
Vidyullatha Kanchanapally
6338c99efa FILS: Send updated connection parameters to drivers if needed
After an initial connection wpa_supplicant derives ERP information which
can be used in doing eventual authentications in the same realm. This
information can be used by drivers with offloaded FILS support to do
driver/firmware initiated roamings. Add support to send this updated
information to such drivers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 01:19:42 +03:00
Vidyullatha Kanchanapally
d2ba0d719e Move assoc param setting into a helper function
This is needed to be able to use the same implementation for updating
the connection parameters in the driver during an association.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 01:19:42 +03:00
Vidyullatha Kanchanapally
084131c850 FILS: Allow eap_peer_get_erp_info() to be called without config
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-18 01:19:40 +03:00
Vidyullatha Kanchanapally
b0a21e228d FILS: Update replay counter from roam info
Update the replay counter after a roam for all cases. This restores the
design back to what it was before commit
01ef320f19 ('FILS: Update ERP next
sequence number with driver offload').

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:26:44 +03:00
Vidyullatha Kanchanapally
693eafb150 nl80211: Update FILS roam info from vendor roam event
Add support to update PMK, PMKID, and ERP next sequence number
from FILS roamed info.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:26:44 +03:00
Vidyullatha Kanchanapally
3c67e977de nl80211: Add support to send updated connection parameters
After an initial connection certain connection parameters may be
updated. It may be necessary to send these parameters to drivers since
these will be used in driver-initiated roaming cases. This commit
defines the driver_ops call for this and implements the needed
functionality for the nl80211 driver interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:04:51 +03:00
Vidyullatha Kanchanapally
cddfda7892 Add attributes to support roam+auth vendor event for FILS
Add additional attributes to specify the PMK, PMKID, and the ERP next
sequence number to the vendor subcommand
QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH. These are needed in case
of an offloaded FILS roaming.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 15:55:44 +03:00
Jouni Malinen
c0fe5f125a Clear BSSID information in supplicant state machine on disconnection
This fixes a corner case where RSN pre-authentication candidate from
scan results was ignored if the station was associated with that BSS
just before running the new scan for the connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 01:15:24 +03:00
Jouni Malinen
006fb845b8 nl80211: Use NL80211_BSS_LAST_SEEN_BOOTTIME if available
This allows a more accurate scan result age to be fetched than the one
available through NL80211_BSS_SEEN_MS_AGO.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 00:07:17 +03:00
Jouni Malinen
a6ea665300 Additional consistentcy checks for PTK component lengths
Verify that TK, KCK, and KEK lengths are set to consistent values within
struct wpa_ptk before using them in supplicant. This is an additional
layer of protection against unexpected states.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 00:07:17 +03:00
Jouni Malinen
ec765bc797 tests: Disabling of EAPOL-Key retries
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 00:07:17 +03:00
Jouni Malinen
6f234c1e2e Optional AP side workaround for key reinstallation attacks
This adds a new hostapd configuration parameter
wpa_disable_eapol_key_retries=1 that can be used to disable
retransmission of EAPOL-Key frames that are used to install
keys (EAPOL-Key message 3/4 and group message 1/2). This is
similar to setting wpa_group_update_count=1 and
wpa_pairwise_update_count=1, but with no impact to message 1/4
retries and with extended timeout for messages 4/4 and group
message 2/2 to avoid causing issues with stations that may use
aggressive power saving have very long time in replying to the
EAPOL-Key messages.

This option can be used to work around key reinstallation attacks
on the station (supplicant) side in cases those station devices
cannot be updated for some reason. By removing the
retransmissions the attacker cannot cause key reinstallation with
a delayed frame transmission. This is related to the station side
vulnerabilities CVE-2017-13077, CVE-2017-13078, CVE-2017-13079,
CVE-2017-13080, and CVE-2017-13081.

This workaround might cause interoperability issues and reduced
robustness of key negotiation especially in environments with
heavy traffic load due to the number of attempts to perform the
key exchange is reduced significantly. As such, this workaround
is disabled by default (unless overridden in build
configuration). To enable this, set the parameter to 1.

It is also possible to enable this in the build by default by
adding the following to the build configuration:

CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-17 00:06:26 +03:00
Jouni Malinen
3bcc524733 tests: WPA2-PSK AP and PTK rekey enforced by station and ANonce change
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:48:25 +03:00
Jouni Malinen
daa4096084 Allow last (Re)Association Request frame to be replayed for testing
The new wpa_supplicant RESEND_ASSOC command can be used to request the
last (Re)Association Request frame to be sent to the AP to test FT
protocol behavior.

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
751f5b2933 Allow EAPOL-Key Request to be sent through control interface
The new wpa_supplicant "KEY_REQUEST <error=0/1> <pairwise=0/1>" command
can be used to request an EAPOL-Key Request frame to be sent to the AP.

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
bb06748f45 Make last received ANonce available through control interface
This makes it easier to debug 4-way handshake implementation issues
without having to use a sniffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
143b81bad5 Allow arbitrary key configuration for testing
The new hostapd control interface command SET_KEY can be used to request
an arbitrary key to be configured to the driver.

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
d8afdb210e Allow EAPOL-Key messages 1/4 and 3/4 to be retransmitted for testing
The new hostapd control interface commands "RESEND_M1 <addr>" and
"RESEND_M3 <addr>" can be used to request a retransmission of the 4-Way
Handshake messages 1/4 and 3/4 witht he same or modified ANonce (in M1).

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
6bc2f00f44 Allow group key handshake message 1/2 to be retransmitted for testing
The new hostapd control interface command "RESEND_GROUP_M1 <addr>" can
be used to request a retransmission of the Group Key Handshake message
1/2 for the current GTK.

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:47:24 +03:00
Jouni Malinen
16579769ff Add testing functionality for resetting PN/IPN for configured keys
This can be used to test replay protection. The "RESET_PN" command in
wpa_supplicant and "RESET_PN <addr>" command in hostapd resets the local
counters to zero for the last configured key. For hostapd, the address
parameter specifies which STA this operation is for or selects GTK
("ff:ff:ff:ff:ff:ff") or IGTK ("ff:ff:ff:ff:ff:ff IGTK").

This functionality is for testing purposes and included only in builds
with CONFIG_TESTING_OPTIONS=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:43:10 +03:00
Jouni Malinen
b74f82a4f8 tests: Comment out during-association TK-in-memory checks
TK needs to be maintained in memory for additional testing
functionality, so for now, comment out these checks.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 17:43:10 +03:00
Jouni Malinen
4158b80eef wlantest: Do not update RSC on replays
This changes wlantest behavior to mark CCMP/TKIP replays for more cases
in case a device is resetting its TSC. Previously, the RSC check got
cleared on the first marked replay and the following packets were not
marked as replays if they continued incrementing the PN even if that PN
was below the highest value received with this key at some point in the
past.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 13:11:36 +03:00
Jouni Malinen
b488a12948 Clear PMK length and check for this when deriving PTK
Instead of setting the default PMK length for the cleared PMK, set the
length to 0 and explicitly check for this when deriving PTK to avoid
unexpected key derivation with an all-zeroes key should it be possible
to somehow trigger PTK derivation to happen before PMK derivation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
Jouni Malinen
00583ef111 Add debug prints on PMK configuration in WPA supplicant
This makes it easier to understand the cases where PMK gets configured
based on information from upper layer call (e.g., a PSK).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
Mathy Vanhoef
a00e946c1c WPA: Extra defense against PTK reinstalls in 4-way handshake
Currently, reinstallations of the PTK are prevented by (1) assuring the
same TPTK is only set once as the PTK, and (2) that one particular PTK
is only installed once. This patch makes it more explicit that point (1)
is required to prevent key reinstallations. At the same time, this patch
hardens wpa_supplicant such that future changes do not accidentally
break this property.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2017-10-16 02:03:47 +03:00
Jouni Malinen
f4528fbf51 tests: 4-way handshake msg 3/4 replay with extra msg 1/4
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00