Commit graph

1962 commits

Author SHA1 Message Date
Jouni Malinen
7c7234a583 tests: Fix scan result clearing in ssid_hidden*
These test cases were supposed to clear the cfg80211 and wpa_supplicant
scan caches in the end to avoid causing issues to the following test
cases. This did not work properly after introduction of the support for
aborting a pending scan. Fix this by using the flush_scan_cache()
function and waiting within the test case until the final scan operation
completes.

This issue was triggered by ssid_hidden/ssid_hidden2 followed by
ext_password_interworking (though, not every time).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
bfdb90d40f tests: EAP-TTLS/MSCHAP with password hash
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
c44e499463 tests: EAP-TTLS local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-20 17:25:41 +02:00
Jouni Malinen
a551da6aae tests: EAP-PEAP local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 21:31:17 +02:00
Jouni Malinen
09a4404a33 tests: EAP-PEAP version forcing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:59:14 +02:00
Jouni Malinen
81e1ab85bc tests: EAP-PEAP session resumption with crypto binding
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:23:51 +02:00
Jouni Malinen
09ad98c58a tests: EAP-PEAP with peap_outer_success=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-19 20:05:50 +02:00
Jouni Malinen
446dd7486c tests: REQ_HS20_ICON and DEL_HS20_ICON
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-19 18:34:01 +02:00
Ilan Peer
2e99239bd9 tests: Add rfkill tests for P2P Device operations
Add a couple of tests for rfkill with P2P Device operations
(with and without P2P Device interface).

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-12-18 22:26:18 +02:00
Jouni Malinen
9f052d805d tests: Prepare ap_open_out_of_memory for modified rfkill init path
The rfkill initialization will be moved out from
wpa_driver_nl80211_drv_init() which would break one step in this OOM
test case due to the memory allocation not existing anymore. Fix this by
skipping that OOM step to avoid causing false failures with the
following commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 22:26:18 +02:00
Jouni Malinen
27f6b03115 tests: wpa_supplicant SIGNAL_MONITOR command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 21:02:37 +02:00
Jouni Malinen
6e9554e307 tests: Detect invitation GO issues more quickly
This speeds up and clarifies error reporting for cases where the GO
fails to start in invitation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-18 16:14:55 +02:00
Johannes Berg
05736da8c6 tests: vm: Honor EPATH in uevent.sh
This is useful for testing CRDA since it means you can use EPATH to
redirect the test scripts to a different crda binary.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-18 00:24:51 +02:00
Jouni Malinen
c4e06b9b7b tests: EAP-TTLS with invalid phase2 parameter values
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-18 00:24:51 +02:00
Jouni Malinen
d386a9ace8 tests: TDLS with VHT 80, 80+80, and 160
This adds more coverage for TDLS testing for a case where the direct
link should use various VHT channel bandwidths.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
7e40a8812b tests: Verify SIGNAL_POLL values in ap_vht80
This confirms that the station recognized and negotiated 80 MHz
channel use with VHT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-17 21:20:02 +02:00
Jouni Malinen
138903f91f tests: Run OCSP test cases with internal TLS library
There is no sufficient OCSP support to go through these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 21:19:59 +02:00
Jouni Malinen
58a406202a tests: OCSP certificate signed OCSP response using key ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-17 00:49:26 +02:00
Jouni Malinen
8e416cecdb tests: Make key-lifetime-in-memory more robust for GTK check
The decrypted copy of a GTK from EAPOL-Key is cleared from memory only
after having sent out CTRL-EVENT-CONNECTED. As such, there was a race
condition on the test case reading the wpa_supplicant process memory
after the connection. This was unlikely to occur due to the one second
sleep, but even with that, it would be at least theorically possible to
hit this race under heavy load (e.g., when using large number of VMs to
run parallel testing). Avoid this by running a PING command to make sure
wpa_supplicant has returned to eloop before reading the process memory.
This should make it less likely to report false positives on GTK being
found in memory.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 17:23:47 +02:00
Jouni Malinen
f089cdf98e tests: Add more memory details on key-lifetime-in-memory
This makes it easier to see where in memory the key was found and what
there is in memory around that location.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-14 15:49:01 +02:00
Jouni Malinen
16c43d2a8f tests: Run PKCS#12 tests with internal TLS crypto
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-14 15:49:01 +02:00
Jouni Malinen
ca27ee0998 tests: External server certificate chain validation
This tests tls_ext_cert_check=1 behavior with EAP-TLS, EAP-TTLS,
EAP-PEAP, and EAP-FAST.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-13 21:12:20 +02:00
Jouni Malinen
be90370bd5 tests: Fix wpas_ctrl_country and dbus_country with valid db.txt
init=CORE was previously used due to invalid db.txt data for 00. For
now, allow both it and the new init=USER after fixed db.txt.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:45:30 +02:00
Jouni Malinen
5b7784a89c tests: EAP-FAST local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-12 12:42:44 +02:00
Jouni Malinen
1025603b3f tests: FT PTK rekeying triggered by AP/station after roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-10 00:14:36 +02:00
Jouni Malinen
cc02fd3eff tests: Make pmksa_cache_opportunistic_connect more robust
This test case could fail if the cfg80211 scan cache brought in a BSS
entry from an earlier test case and a new scan did not get executed
prior to the ROAM command. Fix this by forcing the scan to go through
prior to roaming to AP2

This issue showed up with the following test case sequence:
connect_cmd_roam pmksa_cache_opportunistic_connect

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:31:18 +02:00
Jouni Malinen
0ceff76e7b tests: WPA2 AP processing of RSN IE differences
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 20:00:10 +02:00
Jouni Malinen
8eb45bde38 tests: Write GTK locations into debug log in key_lifetime_in_memory
It looks like it is possible for the GTK to be found from memory every
now and then. This makes these test cases fail. Write the memory
addresses in which the GTK was found to the log to make it somewhat
easier to try to figure out where the key can be left in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:48:43 +02:00
Jouni Malinen
1d32bc2c1c tests: Make dbus_wps_oom more robust
It was possible for the BSSs object property change signal to be
generated during the OOM test case for Get(). If that happened, the
signal was not sent out, but the following Get(BSSs) operation succeeded
unexpectedly which resulted in a test failure. Make this less likely to
happen by waiting 50 ms between the scan and Get(BSSs) operation. This
should be sufficient to cover most cases since wpa_supplicant uses 5 ms
timeout for D-Bus property changed updates.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 17:10:06 +02:00
Jouni Malinen
bc321e1597 tests: Make ap_max_num_sta_no_probe_resp more robust
It was possible for the AP's Beacon frame to be seen by dev[0] when
running a scan. This is not an error case. Make this test case more
robust by verifying with a sniffer whether a Probe Response frame was
sent to unexpected STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 13:38:18 +02:00
Jouni Malinen
ce96e65cb7 tests: D-Bus vendor element operations
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 12:50:41 +02:00
Jouni Malinen
b4e1e99577 tests: EAP-PSK local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 11:13:12 +02:00
Jouni Malinen
4073ef22ae tests: EAP-IKEv2 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-06 00:39:27 +02:00
Jouni Malinen
d1341917ce tests: WPS and fragment ack OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 21:35:45 +02:00
Jouni Malinen
96bf8fe104 tests: PKCS #8 private key with PKCS #5 v1.5 and v2.0 format
This verifies client private key use in encrypted PKCS #8 format with
PKCS #5 v1.5 format using pbeWithMD5AndDES-CBC and PKCS #5 v2.0 format
using PBES2 with des-ede3-cbc.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-05 20:27:27 +02:00
Jouni Malinen
b134397b11 tests: P2P persistent group formation, re-invocation, and cancel
Verify that P2P_CANCEL gets rejected on fully re-invoked persistent
group. This did not work properly before the last couple of commits and
before this week, the P2P_CANCEL on a separate group interface in P2p
Client role could result in use of freed memory and process termination.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 23:15:11 +02:00
Jouni Malinen
f98b0e5806 tests: Make tests using multi_check() more robust
It was possible for a cached scan entry in cfg80211 from an earlier test
case to show up while verifying that the disabled AP does not show up in
scan results. This could result in invalid test failures, e.g., when
running test cases "ap_require_ht ap_multi_bss_config" multiple times
(depends a bit on timing). Make this less likely to occur by explicitly
clearing the scan cache and by stopping wlan1 from trying to associate
before stopping ap_required_ht* test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-04 21:03:43 +02:00
Jouni Malinen
d887ed3f95 tests: Fix ap_wps_er_multi_add_enrollee cleanup steps
Only one of the ERs was stopped at the end of the test case and this
could result in the following test case failing, e.g., when executing
this test case sequence: ap_wps_er_multi_add_enrollee ap_wps_upnp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 18:19:39 +02:00
Jouni Malinen
2c68ae2b21 tests: Remove forgotten print from gas_anqp_oom_hapd
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 13:32:59 +02:00
Jouni Malinen
be4a0d0d5a tests: Make autogo_join_auto_go_neg more robust
It was possible for this test case to fail if the single attempt of
discovering the peer as part of the scan for join failed. This test case
was useful in combination with another test case:
ap_hs20_fetch_osu autogo_join_auto_go_neg

However, there is now an explicit test case (discovery_after_gas) for
this, so autogo_join_auto_go_neg can be made more robust without losing
testing coverage.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
3bba9c71c5 tests: P2P device discovery after fragmented GAS/ANQP exchange
This verifies cfg80211/mac80211 offchannel TX cancellation steps.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-12-02 12:37:12 +02:00
Jouni Malinen
850e054c0f tests: EAP-EKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-01 01:09:28 +02:00
Jouni Malinen
34b164dd25 tests: Fix p2p_go_move_scm_peer_does_not_support to clear avoid freqs
The P2P channel list on dev[1] at the end of
p2p_go_move_scm_peer_does_not_support was empty because all of the 2.4
GHz band got disabled by the simulated avoid frequencies driver event.
That channel list needs to be cleared prior to resetting regulatory
domain back to world roaming to get the P2P channel list updated
properly for the following test cases.

This was triggered by the following test case sequence:
p2p_go_move_scm_peer_does_not_support persistent_group_and_role_change

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 22:06:54 +02:00
Jouni Malinen
53b2100a3f tests: P2P group formation timeout with cfg80211 P2P Device
Verify that both the GO and P2P Client processing of P2P group formation
timeout removes the correct group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 21:38:23 +02:00
Jouni Malinen
5549bead85 Revert "tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc"
This reverts commit 78fdab307e. This test
case needs MCC support on two stations, so the earlier attempt to handle
this with one dynamic interface is not sufficient.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 19:58:07 +02:00
Jouni Malinen
45e8a45bb5 tests: Show vm-run.sh command line for re-running failure sequences
Now that vm-run.sh supports a long list of test cases without crashing
the VM kernel, there is no need to use the "parallel-vm.py -1 1 <tests>"
workaround. Print the re-run example commands with vm-run.sh instead. In
addition, add the --long argument if it was specified for the test run
to avoid skipping test cases in the re-run case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 19:42:56 +02:00
Jouni Malinen
6a5f578cac tests: Force concurrent exchange in ap_wps_er_multi_add_enrollee
This makes it more likely for the two ERs to go through WPS UPnP
exchange in parallel. This was already happening every now and then and
resulted in failures. However, now that there is support for multiple
concurrent exchanges, it is useful to have this test case hit that
possibility more frequently.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 16:58:47 +02:00
Jouni Malinen
c00f19061c tests: wpa_supplicant sched_scan_plans parsing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:29 +02:00
Johannes Berg
23fcfd6004 tests: Allow passing more arguments to vm-run.sh
The script is currently limited by the maximum kernel command line
length and if that's exceeded the kernel panics at boot. Fix this by
writing the arguments to a file and reading it in the VM.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-30 14:03:28 +02:00
Jouni Malinen
f0154bf434 tests: Extend scan_dfs to cover US-disallowed channels 12 and 13
Verify that active scanning is not used in US regulatory domain on 2.4
GHz channels 12 and 13.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-30 14:03:23 +02:00
Jouni Malinen
d6ba709aa3 tests: EAP-TLS with SHA512/SHA384 signature
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-30 00:39:38 +02:00
Jouni Malinen
cc71035f6c tests: ap_wpa2_eap_fast_prf_oom with internal TLS implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 23:57:39 +02:00
Jouni Malinen
404597e630 tests: Skip ap_wpa2_eap_ttls_dh_params_dsa with internal TLS
DH DSA parameters are not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:09:44 +02:00
Jouni Malinen
686eee77d2 tests: Skip PKCS#12 tests with internal TLS client implementation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 21:07:39 +02:00
Jouni Malinen
089e7ca372 tests: Skip dbus_connect_eap if altsubject_match is not supported
This test case fails with the current internal TLS client implementation
since the needed altsubject_match parameter is not yet supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:57:26 +02:00
Jouni Malinen
c5ef7bbfa5 tests: Fix wpas_ctrl_oom with the internal TLS implementation
One of the OOM cases does not apply for internal crypto implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:43:44 +02:00
Jouni Malinen
c675f669c3 tests: Fix wpas_ctrl_network without SAE
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:38:34 +02:00
Jouni Malinen
e78eb40442 tests: Skip domain_match and domain_suffix_match with internal TLS
The internal TLS client in wpa_supplicant does not yet support the
functionality needed for these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:35:05 +02:00
Jouni Malinen
2286578fe0 tests: TLS v1.2 check in ap_wpa2_eap_tls_versions for internal TLS
The internal TLS implementation in wpa_supplicant supports TLS v1.2, so
verify that this version can be disabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 20:04:26 +02:00
Jouni Malinen
bb0a72ab46 tests: Skip OCSP test cases with the internal TLS implementation
The internal TLS client implementation does not yet support OCSP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:32:45 +02:00
Jouni Malinen
0fc1b583e2 tests: ap_wpa2_eap_ttls_server_cert_hash with internal TLS client
Since the internal TLS client implementation in wpa_supplicant now has
sufficient support for this functionality, allow the test case to be
executed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-29 19:02:04 +02:00
Jouni Malinen
9b35afd6ac tests: Fix OOM eloop_register_sock() test cases with new gcc
gcc 4.8 vs 5.2 seem to compile eloop_register_sock() differently. With
5.2, that function name does not show up in the backtrace since
eloop_sock_table_add_sock() is used without a separate function call.
This broke the memory allocation failure checking in this test case. Fix
this by matching against the eloop_sock_table_add_sock() function which
shows up in the backtrace for both gcc versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:48:16 +02:00
Jouni Malinen
d36ae37679 tests: EAP-SIM/AKA/AKA' error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 20:46:36 +02:00
Jouni Malinen
288b6f8b85 tests: Extended coverage for the EAP-SAKE attribute parser
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 12:25:22 +02:00
Jouni Malinen
ab4ea0e948 tests: EAP-SAKE local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:53:31 +02:00
Jouni Malinen
c49b383f45 tests: Convert eap_proto_sake to use newer design
This makes it more convenient to extend the test case with new
message exchanges.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 11:22:21 +02:00
Jouni Malinen
6f2252614c tests: Fix error message for ap_open_out_of_memory
If hostapd AP started unexpectedly, this test case would fail with
NameError due to incorrect variable name being used to construct the
exception text.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:23:35 +02:00
Johannes Berg
1a4f18d8f4 tests: run-tests: Print more details about NameError
If encountering a NameError, print the entire traceback so that
it's actually debuggable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-28 00:21:20 +02:00
Jouni Malinen
b6f17f2f5c tests: ERP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-28 00:18:49 +02:00
Jouni Malinen
12fff543b3 tests: Enable 802.11ac support in example wpa_supplicant config
This is needed for proper test execution. The recently added VHT 80+80
test cases started verifying channel bandwidth on the station side and
those checks fail if wpa_supplicant is built without
CONFIG_IEEE80211AC=y.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 21:11:53 +02:00
Johannes Berg
680ce356c0 tests: Honor HWSIM_TEST_LOG_DIR variable in VM runs
If /tmp has a relatively small size limit, or multiple people run the
tests on the same machine, using the same output directory can easily
cause problems.

Make the test framework honor the new HWSIM_TEST_LOG_DIR environment
variable to make it easier to avoid those problems.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Johannes Berg
10a15590f8 tests: Add a simple wmediumd test
If wmediumd is available on the path, test that it can forward
packets between two virtual nodes and that stopping it makes
the regular in-kernel datapath do the needed work again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-27 21:11:53 +02:00
Jouni Malinen
f6c09bf46e tests: Remove HwsimSkip from p2p_channel
With the optimizations from the previous commits, none of the test cases
here need to be skipped.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:38:17 +02:00
Jouni Malinen
858d12f69a tests: Optimize p2p_go_move_active initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:37:35 +02:00
Jouni Malinen
ae248721f4 tests: Optimize p2p_go_move_reg_change initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:35:51 +02:00
Jouni Malinen
63b87a5aeb tests: Optimize p2p_go_move_scm_multi initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:31:44 +02:00
Jouni Malinen
3acf68feb9 tests: Convert p2p_go_move_scm_multi to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:30:02 +02:00
Jouni Malinen
d18df681b0 tests: Convert p2p_go_move_scm_peer_does_not_support to dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:27:25 +02:00
Jouni Malinen
f0b39e057a tests: Convert p2p_go_move_scm_peer_supports to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

In addition, remove dependency on --long since this test case does not
really take that long (just couple of seconds).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:24:33 +02:00
Jouni Malinen
b98445f6ba tests: Optimize p2p_go_move_scm initial wait
There is no need to wait for the initial client timeout in this type of
test sequence since that wait can be cleared by connecting and
disconnecting a client to the group. This allows the test case to be
executed much more quickly and the dependency on --long can be removed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:22:30 +02:00
Jouni Malinen
262825e896 tests: Convert p2p_go_move_scm to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:14:38 +02:00
Jouni Malinen
1002684e11 tests: Convert p2p_go_move_active to use dynamic hwsim
Use a dynamically added HWSimRadio to allow the MCC case to be covered
with a single test run with the mac80211_hwsim default radios disabling
MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:11:27 +02:00
Jouni Malinen
78fdab307e tests: Dynamic hwsim p2ps_channel_active_go_and_station_different_mcc
Convert p2ps_channel_active_go_and_station_different_mcc to use a
dynamically added HWSimRadio to allow the MCC case to be covered with a
single test run with the mac80211_hwsim default radios disabling MCC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 19:01:10 +02:00
Jouni Malinen
d2e7cfc0bd tests: Use wlantest without capture file write buffering
This makes the run_tshark() operations more reliable while still
allowing to reduce the extra wait by forcing wlantest to flush the
packets to the pcapng file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 00:12:38 +02:00
Jouni Malinen
b25f04d44a tests: Clean up frequency list in scan_dfs
This makes the test log more readable by converting the values to
integers and sorting the array.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 23:42:30 +02:00
Jouni Malinen
3960585785 tests: VHT with 80 MHz channel width and local power constraint
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 20:41:55 +02:00
Jouni Malinen
7767687109 tests: Abort scan
This verifies the nl80211 behavior to abort a scan on an explicit
control interface request and on connection request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 19:44:14 +02:00
Jouni Malinen
f9bf222552 tests: Scan on DFS channels
This is a test case for mac80211 behavior regarding active scanning on
DFS channels.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 19:24:25 +02:00
Jouni Malinen
a74a1e4eab tests: Open mesh network on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
13f6ef9c79 tests: IBSS on VHT 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 18:47:40 +02:00
Jouni Malinen
05032725e1 tests: P2P client joining a group before having found GO Device Address
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 15:17:36 +02:00
Jouni Malinen
bcf4e38c5f tests: AP with open mode and REASSOCIATE not finding a match
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-26 12:23:19 +02:00
Jouni Malinen
35b61a496a tests: Verify P2P group formation with 80+80 MHz channel
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-25 22:43:38 +02:00
Jouni Malinen
08e47376ec tests: Import p2p_utils instead of functions from old locations
These couple of files were forgotten when moving P2P helper functions
into the new p2p_utils.py file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-25 15:47:16 +02:00
Johannes Berg
f2a438f51d tests: Print test name to kernel log buffer
Print the test name to the kernel log buffer so debugging
cross-test issues becomes easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-24 16:28:24 +02:00
Anton Nayshtut
81822ce688 tests: Make FST tests aware of unconditional station's MB IE exposure
This syncs the test cases with the implementation change in station's MB
IE creation. FST tests should expect MB IE regardless of the station
connection state and whether the current connection is FST-enabled or
not. This fixes the follow test cases that started reporting failures
with the previous commit change in src/fst/fst_group.c:
fst_disconnect_1_of_2_stas_from_non_fst_ap
fst_sta_connect_to_non_fst_ap
fst_second_sta_connect_to_non_fst_ap
fst_disconnect_2_of_2_stas_from_non_fst_ap
fst_second_sta_connect_to_fst_ap
fst_disconnect_1_of_2_stas_from_fst_ap

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-23 20:36:54 +02:00
Ilan Peer
edb63af6ba tests: Test no P2P GO move when invitation is in progress
Add a test to verify that a P2P GO does not start a CSA
once invitation signalling is done, and the P2P client is
about to connect.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 22:16:32 +02:00
Jouni Malinen
845d48c133 tests: Make dbus_p2p_group_idle_timeout more robust
This test case was failing if a PropertiesChanged signal for P2P peer
gets delivered from a previous test case. Avoid that by waiting for the
new group to be formed before processing any PropertiesChanged signals.

This failure was triggered by the following test case sequence:
dbus_p2p_two_groups dbus_p2p_group_idle_timeout

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 21:28:49 +02:00
Jouni Malinen
e1246a6e2c tests: Make ap_open_select_twice less likely to fail
It looks like a previous P2P test case can cause the initial single
channel scan in ap_open_select_twice take more than five seconds in some
cases. While that is not really expected behavior, this test case should
not fail. Increase the timeout to avoid reporting false failures here.

This could be triggered with the following test case sequence:
p2p_msg_unexpected_go_neg_resp ap_open_select_twice

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 20:14:06 +02:00
Jouni Malinen
05bc2b44c1 tests: INTERFACE_ADD create testing coverage
This covers an invalid interface type and interface type 'sta'.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-22 17:59:54 +02:00
Ilan Peer
061190308d tests: wpa_supplicant interface creation in AP mode
Add a test case that creates a new interface in AP mode.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-11-22 17:54:07 +02:00
Jouni Malinen
29fb191cfd tests: Clear scan cache at the start of ap_vht80*
These test cases depend on the HT40 co-ex scans not swapping PRI/SEC
channels. It was possible for a test case to fail, e.g., in the
following sequence: ap_ht40_5ghz_match ap_vht80b.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 19:04:12 +02:00
Jouni Malinen
fe5aa8cb9c tests: EAP-pwd local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
d5482411cf tests: EAP-MD5 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
6fb8b4bf84 tests: AP with open mode and select network twice
This verifies that the second SELECT_NETWORK for the same network starts
a new scan immediately if the previous connection attempt is waiting for
the next scan iteration to start.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 00:48:25 +02:00
Jouni Malinen
364418661d tests: PMKSA caching and EAPOL reauthentication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:36 +02:00
Jouni Malinen
4013d6885b tests: Verify EAPOL reauthentication after FT protocol
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:29 +02:00
Jouni Malinen
119562cfdf tests: Clear FST sessions at the end of fst_setup_mbie_diff
This avoids issues with following test cases failing due to unexpected
starting state. This issue showed up with the following hwsim test case
sequence:
fst_setup_mbie_diff fst_dynamic_iface_attach

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 17:33:34 +02:00
Jouni Malinen
4f524e99d2 tests: Clear scan cache at the end of ap_wps_per_station_psk
It was possible for the WPS PBC state to get cached through to the
following test cases and that would trigger false failures. Fix this by
explicitly clearing the scan cache at the end of ap_wps_per_station_psk.
This issue was triggered with the following test case sequence:
ap_wps_per_station_psk autogo_pbc

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-18 18:03:22 +02:00
Jouni Malinen
89a79ca2b9 tests: Force hw capability re-fetch at the end of dbus_connect_oom
This is needed since the forced OOM may have forced the cached
information to be invalid or dropped. This issue was hit with the
following hwsim test case sequence:
ap_interworking_scan_filtering fst_sta_config_llt_large dbus_connect_oom
wpas_ctrl_enable_disable_network

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Jouni Malinen
1992af115a tests: D-Bus P2P and InvitationReceived
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-17 19:50:34 +02:00
Jouni Malinen
2299b54383 tests: D-Bus SaveConfig
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-15 19:08:05 +02:00
Jouni Malinen
8a848fae66 tests: EAP-pwd protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
8823178c96 tests: Start WNM-Sleep Mode in wnm_action_proto*
This is needed to avoid test case failures with additional state
validation in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
63a19e56b0 tests: WNM Action protocol testing (PMF disabled)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
d0f56772ea tests: Fix wpas_ctrl_network for builds without Suite B support
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-02 00:30:00 +02:00
Jouni Malinen
f2d789f20b tests: EAP-pwd with Brainpool EC
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 11:30:48 +02:00
Jouni Malinen
1720ff58ec tests: More SET_CRED coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 01:03:45 +02:00
Jouni Malinen
71a3b85fff tests: mesh_basic_rates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:50:17 +02:00
Jouni Malinen
dd5e61b4d8 tests: Additional SET_NETWORK coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:46:09 +02:00
Jouni Malinen
4128f53d8b tests: Additional wpa_supplicant SET ctrl_iface command coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:28:35 +02:00
Jouni Malinen
3392a90dec tests: Clear config_methods at the end of wpas_ctrl_set_wps_params
It was possible for dev[2] to be left with non-default config_methods
parameter at the end of the test case and that could result issues in
following test cases. This hit a failure in the following sequence:
wpas_ctrl_set_wps_params p2ps_channel_active_go_and_station_same

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 21:56:59 +02:00
Jouni Malinen
a63ebc159d tests: Fix wifi_display_parsing
Due to a typo in a function name, this test case ended up running
without the final cleanup. That could result in the following test cases
failing, e.g., when running this sequence:
wifi_display_parsing dbus_p2p_go_neg_auth

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:31:03 +02:00
Jouni Malinen
d4c3c055d5 tests: EAP-SIM DB error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:28:33 +02:00
Jouni Malinen
a6cc1e5747 tests: VHT with 160 MHz channel width and no DFS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-30 16:15:40 +02:00
Dan Williams
f0ef68892e tests: Add testcases for interface global properties
Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:33 +02:00
Jouni Malinen
8901189c0f tests: Update hapd_ctrl_set_error_cases RTS/fragmentation threshold
The previously used invalid values will become allowed with the
following commits, so change the test case to use values that both were
and will continue to be invalid to avoid unnecessary failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-28 20:53:15 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Jouni Malinen
9cd8859ed6 tests: Fix scan flush in p2ps_channel_both_connected_same
Need to do this before associating with the AP and with the correct
devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:59:07 +02:00
Jouni Malinen
e1195efd1e tests: Skip radius_acct_ipaddr if kernel does not support ProxyARP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:47:47 +02:00
Jouni Malinen
fde35be9b1 tests: WPA2-PSK AP with PMF required and PMF disabled on STA
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
c4082f7839 tests: WNM Action protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9464e0996e tests: P2P autonomous GO and no P2P IE in Probe Response scan results
autogo_scan verifies the special case where a Probe Response frame
without P2P IE has been received from a GO (e.g., due to a non-P2P
interface requesting a scan) and P2P information from a Beacon frame
needs to be used instead to determine that the group is persistent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
046e63fa2b tests: Interworking network selection and ANQP format errors
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bd886d47c5 tests: P2P protocol tests for service discovery messages
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
97f8544305 tests: P2P protocol tests for Group Info parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
10649029ca tests: Wi-Fi Display extensions to P2P and special parsing cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bf0ec17a51 tests: EAP-GPSK error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 21:42:36 +03:00
Jouni Malinen
2ab957afc5 tests: RADIUS Accounting and Framed-IP-Address
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:55:12 +03:00
Jouni Malinen
dd0d294d2f tests: Maximum STA count and limit on Probe Response frames
This verifies hostapd behavior with no_probe_resp_if_max_sta=1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:31:17 +03:00
Avraham Stern
cf0dffd67e tests: Change wpas_config_file test for dedicated P2P Device case
SAVE_CONFIG command on the global control interface tries to save
the config file on all interfaces. The test disabled updating the
config file only on one interface, thus for configurations that
support a dedicated P2P Device interface, saving the config file
would still have succeeded on the P2P Device interface.

Fix the test by disabling updating the configuration file on the global
control interface (which will, in practice, disable this for the P2P
Device interface) in addition to disabling it on the main interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:34:04 +03:00
Avraham Stern
c5d070f249 tests: Set MAC address in wpas_ctrl_interface_add2 test
mac80211_hwsim only supports 2 different MAC addresses.
Configurations that use a dedicated P2P Device interface already
use these 2 addresses, so adding another interface on the same
PHY results in a duplicated MAC address.

Fix this by changing the MAC address of the added interface to make
sure the new interface has a unique MAC address.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:26:48 +03:00
Avraham Stern
f487e306b9 tests: Set bridge ageing in ap_wpa2_bridge_fdb test
Set the bridge ageing to 1 sec to make the bridge clear unused
addresses after this interval. Otherwise the test depends on
the local configuration of brctl.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:22:54 +03:00
Avraham Stern
f3b7761ab7 tests: Fix ap_cipher_tkip_countermeasures_sta test
Write the main interface address to the tkip_mic_test debugfs file
to generate Michael MIC failure event (which is different than the
p2p_dev_addr when a dedicated P2P Device interface is used).

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:11:05 +03:00
Jouni Malinen
faee294f1e tests: P2P GO Negotiation special cases
These test cases verify behavior with parallel scan operations while
going through GO Negotiation and duplicated GO Negotiation Request frame
RX with not-yet-ready sequence in GO Negotiation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:40 +03:00
Jouni Malinen
754c68de16 tests: Fix P2P message construction byte order for config_method
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:03 +03:00
Dan Williams
d7273180c6 tests: Fix VM tests for Fedora
Binaries aren't always in /usr/bin/, plus kvm is sometimes 'qemu-kvm'.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-14 19:23:00 +03:00
Jouni Malinen
78185978ed tests: Fix regulatory domain reset in FST test case failure cases
send_iface_detach_request() can fail and that resulted in skipping a
call to restore_reg_domain() and leaving unexpected country
configuration for following test cases. This could result in failures,
e.g., in this sequence: fst_proto wpas_mesh_open_5ghz

Fix this by ignoring exceptions from send_iface_detach_request() and
continuing to restore regulatory domain.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
4150c7c97c tests: Fix p2ps_channel_both_connected_same
I modified this test case for commit
eabf083984 ('tests: P2PS channel
handling') to use dev[2] instead of dev[0], but forgot to update the
p2ps_connect_p2ps_method() dev list to match that. Fix this to actually
use a concurrent connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-13 18:57:20 +03:00