Commit graph

12864 commits

Author SHA1 Message Date
Jouni Malinen
af872d9d88 tests: DPP protocol testing - invalid I-nonce in Auth Req
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 17:34:05 +02:00
Jouni Malinen
a444673957 DPP: Protocol testing capability to send invalid I-Nonce in Auth Req
Extend dpp_test to cover one more invalid behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 16:23:42 +02:00
Jouni Malinen
169e341e34 tests: DPP and PKEX retry behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 15:55:51 +02:00
Jouni Malinen
00d2d13db2 DPP: Retry PKEX Exchange Request frame up to five times
Retransmit the PKEX Exchange Request frame if no response from a peer is
received. This makes the exchange more robust since this frame is sent
to a broadcast address and has no link layer retries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-22 15:54:35 +02:00
Jouni Malinen
cb6b22325f tests: sigma_dut DPP/QR initiator as Configurator (neg_freq)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-21 01:12:58 +02:00
Jouni Malinen
0e664e0c12 tests: sigma_dut DPP/QR initiator as Configurator or Enrollee
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-21 01:02:37 +02:00
Jouni Malinen
951fc8df34 tests: Double TPK M2 during TDLS setup initiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-21 00:49:17 +02:00
Jouni Malinen
ab0375508d TDLS: Add testing capability to send TPK M2 twice
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-21 00:48:52 +02:00
Jouni Malinen
7b111c04d0 tests: Open AP and STA reassociating back without auth exchange
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-20 21:31:36 +02:00
Jouni Malinen
de731ec25c tests: Additional DPP protocol testing for Peer Discovery Req/Resp
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 17:15:48 +02:00
Jouni Malinen
4b8de0c929 DPP: Protocol testing for invalid Peer Discovery Req/Resp values
Extend dpp_test to allow more invalid attribute values to be written
into Peer Discovery Request/Response frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 17:15:02 +02:00
Jouni Malinen
18b8c35b41 tests: Fix ap_cipher_tkip_countermeasures_sta2
hostapd implementation was changed to use a valid Status Code when
rejecting the connection. This test case was forgotten at the time, but
it needs a matching change to allow the new value (1 instead of 14).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-19 16:02:07 +02:00
Jouni Malinen
b0fda6b715 tests: DPP protocol testing - invalid Config Attr Obj in Conf Req
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:20 +02:00
Jouni Malinen
f9cf7d03f1 DPP: Protocol testing for invalid Config Attrib Object value
Extend dpp_test to cover a case where Config Attrib Object value is
invalid in Configuration Request frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:20 +02:00
Jouni Malinen
655e82b1bb tests: DPP protocol testing - invalid Status in Auth Resp/Conf
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:20 +02:00
Jouni Malinen
3f35ec2dc3 DPP: Protocol testing for invalid DPP Status value
Extend dpp_test to cover cases where DPP Status value is invalid in
Authentication Response/Confirm frames.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 14:13:16 +02:00
Jouni Malinen
9efa531499 DPP: Use helper functions to build Bootstrap Key Hash attributes
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:41:57 +02:00
Jouni Malinen
acdf703d50 DPP: Replace custom undefined attr with DPP Status in after-wrapped data
This has the same impact and is needed for some testing needs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:32:00 +02:00
Jouni Malinen
56f24d1da0 DPP: Use a helper function to build DPP Status attribute
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:27:14 +02:00
Jouni Malinen
e486e5fdcb tests: sigma_dut DPP/QR (mutual) initiator (response pending)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 12:07:07 +02:00
Jouni Malinen
47183df78a tests: DPP protocol testing for invalid I/R-bootstrap key hash
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 11:33:22 +02:00
Jouni Malinen
65ecce87fd DPP: Protocol testing for writing invalid I/R Bootstrap Key Hash
Extend dpp_test to cover cases where Initiator/Responder Bootstrap Key
Hash value in DPP Authentication frames is invalid (flip one bit).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 11:32:02 +02:00
Jouni Malinen
dc515328a2 tests: DPP protocol testing - invalid I/R-proto key in Auth Req/Resp
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 00:12:37 +02:00
Jouni Malinen
b6b4226bdd DPP: Protocol testing capability to generate invalid Protocol Key
This extends dpp_test to allow invalid Initiator/Responder Protocol Key
to be written into the Authentication Request/Response frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-19 00:11:44 +02:00
Jouni Malinen
20c18348e0 tests: sigma_dut controlled AP and PSKHEX
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:09 +02:00
Jouni Malinen
c6eb3e34b6 Stronger GTK derivation routine
If the build include SHA384, use that to derive GTK from GMK. In
addition, add more random bytes bytes to the PRF-X() context data for
longer GTK to reduce dependency on the randomness of the GMK.

GMK is 256 bits of random data and it was used with SHA256, so the
previous design was likely sufficient for all needs even with 128 bits
of additional randomness in GTK derivation. Anyway, adding up to 256
bits of new randomness and using SHA384 can be helpful extra protection
particularly for the cases using GCMP-256 or CCMP-256 as the group
cipher.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-18 17:50:09 +02:00
Jouni Malinen
a680f4ef39 tests: Use group 26 instead of 25 in mesh test cases
This allows mesh_sae_groups_invalid and
wpas_mesh_secure_sae_group_negotiation to be run with BoringSSL (group
25 not available anymore).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-18 17:50:08 +02:00
Jouni Malinen
8f08315737 tests: Skip fils_sk_pfs_25 with BoringSSL
It looks like BoringSSL has dropped support for group 25 (192-bit Random
ECP Group).

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-18 17:50:08 +02:00
Jouni Malinen
9626bfbb8d tests: Skip ap_wpa2_eap_fast_eap_sim if no EAP-FAST support
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-11-18 17:50:08 +02:00
Jouni Malinen
94619905c8 DPP: Fix dpp_test_gen_invalid_key() with BoringSSL
Unlike OpenSSL, BoringSSL returns an error from
EC_POINT_set_affine_coordinates_GFp() is not on the curve. As such, need
to behave differently here depending on which library is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:08 +02:00
Jouni Malinen
d584946ec1 tests: Skip DPP tests with Brainpool curves when using BoringSSL
BoringSSL does not include these EC curves.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:08 +02:00
Jouni Malinen
746c1792ac DPP: Build bootstrapping key DER encoding using custom routine
While the OpenSSL version of i2d_EC_PUBKEY() seemed to be able to use
the POINT_CONVERSION_COMPRESSED setting on the EC key, that did not seem
to work with BoringSSL. Since this is not exactly robust design, replace
use of i2d_EC_PUBKEY() with a custom routine that enforces the DPP rules
on SubjectPublicKeyInfo (compressed format of the public key,
ecPublicKey OID, parameters present and indicating the curve by OID).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 17:50:02 +02:00
Jouni Malinen
f2d27ef94c DPP: Use a helper function to DER encode bootstrapping key
This routine was previously implemented twice using i2d_EC_PUBKEY().
There is no need to duplicate that implementation and especially since
it looks like this implementation needs to be replaced for BoringSSL,
start by using a shared helper function for both locations so that there
is only a single place that uses i2d_EC_PUBKEY() to build the special
DPP bootstrapping key DER encoding.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-18 12:14:21 +02:00
Jouni Malinen
c1564149a6 BoringSSL: Add AES support with 192-bit keys
BoringSSL restored the previously removed AES-192 ECB support in ("Add
AES-192 ECB.") commit. Since this is needed for DPP with the P-384
curve, restore support for this through EVP_aes_192_ecb().

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 21:03:04 +02:00
Jouni Malinen
edd72f55f8 OpenSSL: Debug message if requested AES key length is not supported
This makes it clearer why some AES operations fail especially with
BoringSSL where the 192-bit case is not supported.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:59:25 +02:00
Jouni Malinen
5548453a2d BoringSSL: Add DPP special cases regardless of claimed version number
It looks like BoringSSL claims to have OPENSSL_VERSION_NUMBER for a
1.1.0 version, but it does not provide ECDSA_SIG_set0() or
ECDSA_SIG_get0(). For now, add the helper functions regardless of the
version BoringSSL claims to be. Similarly, include the X509_ALGOR_get0()
workaround unconditionally for BoringSSL.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:44:42 +02:00
Jouni Malinen
f29761297b BoringSSL: Implement crypto_ecdh_init()
BoringSSL does not provide some of the OpenSSL API that was used here,
so update this to use similar design to what was already done with DPP
key derivation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:41:25 +02:00
Jouni Malinen
7721fe082b BoringSSL: Comment out SSL_set_default_passwd_cb*() calls
It looks like BoringSSL claims to have OPENSSL_VERSION_NUMBER for a
1.1.0 version, but it does not provide SSL_set_default_passwd_cb*(). For
now, comment out this regardless of the version BoringSSL claims to be.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:34:17 +02:00
Jouni Malinen
b9dc63c261 BoringSSL: Comment out SSL_set1_sigalgs_list() call
It looks like BoringSSL claims to have OPENSSL_VERSION_NUMBER for a
1.1.0 version, but it does not provide SSL_set1_sigalgs_list(). For now,
comment out this regardless of the version BoringSSL claims to be.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:30:37 +02:00
Jouni Malinen
3cfbd3b0f6 BoringSSL: Define RSA_bits() helper
It looks like BoringSSL claims to have OPENSSL_VERSION_NUMBER for a
1.1.0 version, but it does not provide RSA_bits(). For now, add this
backwards compatibility wrapper for BoringSSL regardless of the version
it claims to be.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 20:24:46 +02:00
Jouni Malinen
211b5d1ba1 tests: sigma_dut DPP Configurator and self-configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 19:14:21 +02:00
Jouni Malinen
14f8e08128 tests: Fix spelling of sigma_dut DPPConfEnrolleeRole argument
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 19:13:50 +02:00
Sriram R
e053465835 tests: Fix ap_config_reload_on_sighup test
Use absolute path name for configuration file to ensure the file can be
succesfully reloaded and read on SIGHUP signal. This is needed when
running the test case on host (i.e., not using a VM).

Signed-off-by: Sriram R <srirrama@qti.qualcomm.com>
2017-11-17 19:13:10 +02:00
Jouni Malinen
21fd5576a5 tests: sigma_dut and group cipher override on AP
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:44:50 +02:00
Jouni Malinen
6af3b5934b tests: sigma_dut and AP enabling two pairwise ciphers
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:33:54 +02:00
Jouni Malinen
5068af8536 tests: hostapd group_cipher override
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:33:54 +02:00
Jouni Malinen
27781c0ab5 Allow group cipher selection to be overridden
The new hostapd configuration parameter group_cipher can now be used to
override the automatic cipher selection based on enabled pairwise
ciphers. It should be noted that selecting an unexpected group cipher
can result in interoperability issues and this new capability is mainly
for testing purposes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-17 12:31:41 +02:00
Jouni Malinen
aab6612836 wlantest: Search bss/sta entry more thoroughly for 4-address frames
Previous design worked for the case where only one of the devices was
beaconing, but failed in one direction to find the PTK if both devices
beaconed. Fix this by checking the A1/A2 fields in both directions if
the first pick fails to find the sta entry.

In addition, select the proper rsc value (rsc_tods vs. rsc_fromds) based
on A2 (TA) value for ToDS+FromDS frames to avoid reporting incorrect
replay issues.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-15 02:12:20 +02:00
Edayilliam Jayadev
af6614ca10 Fix block comment style in QCA vendor attribute definition
Fix the block comment style issue introduced as part of commit
fbfceef3af ("Add QCA vendor commands for
spectral scan").

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-11-14 18:55:30 +02:00
tinlin
2115603a45 Add QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING
Add sub-command QCA_NL80211_VENDOR_SUBCMD_PEER_FLUSH_PENDING to flush
pending packets in firmware. The attributes are listed in enum
qca_wlan_vendor_attr_flush_pending. The QCA_WLAN_VENDOR_ATTR_PEER_ADDR
specifies the peer MAC address and the QCA_WLAN_VENDOR_ATTR_AC specifies
the access category of the pending packets.

Signed-off-by: Lin Tingting <tinlin@qti.qualcomm.com>
2017-11-14 18:52:59 +02:00