Commit graph

11497 commits

Author SHA1 Message Date
Jouni Malinen
913c3e1e83 Add CONFIG_IBSS_RSN=y into wpa_supplicant defconfig
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 19:39:13 +03:00
Jouni Malinen
81a10a9442 Do not try to start/join RSN IBSS without CONFIG_IBSS_RSN=y
Previously, a build without IBSS RSN support tried to start/join an IBSS
even if the profile was configured with RSN parameters. This does not
work and resulted in quite confusing debug log. Make this clearer by
explicitly checking for this case and reject the connection attempt with
a clearer debug log entry instead of trying something that is known to
fail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 19:33:20 +03:00
Maneesh Jain
ea06a08f85 HS 2.0 server: Remove redundant NULL check
Both devinfo and devdetail are non-NULL here due to the earlier check
within the same function.

Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:08:32 +03:00
Nishant Chaprana
5f99d96287 Removed redundant NULL check for sta in hostapd_event_sta_low_ack()
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-10-28 19:06:20 +03:00
Nishant Chaprana
230b2b2c3d Removed redundant NULL check for b in wpabuf_concat()
Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-10-28 19:05:08 +03:00
Maneesh Jain
641c73f84f driver.h: Fix a typo in a comment
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:01:50 +03:00
Sunil Dutt
2e4e4fb71c nl80211: Allow TDLS trigger modes to be configured to the host driver
This commit adds a control interface command to configure the TDLS
trigger mode to the host driver. This TDLS mode is configured through
the "SET tdls_trigger_control" control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:22:33 +03:00
Sunil Dutt
14cd203fff QCA vendor command to configure the TDLS behavior in the host driver
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:12:25 +03:00
lifeng
a18563d428 Extend QCA vendor attribute link layer statistics attribute
This adds new statistics attributes to support channel hopping feature.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:05:59 +03:00
lifeng
95f3703ae1 Add more QCA vendor attribute definitions into qca-vendor.h
These attributes were previously maintained elsewhere. This commit moves
them to follow the standard assignment process through the qca-vendor.h
file in hostap.git.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 22:03:33 +03:00
lifeng
87416eaf64 QCA vendor attribute to report frame aggregation failure
Add a new vendor attribute config to set the reorder blocksize and
timeout in 4 ACs, and then report the frame aggregation failure
statistics in QCA_NL80211_VENDOR_SUBCMD_STATS_EXT command. In addition,
fix the spelling of the enum value for this subcommand.

Signed-off-by: Li Feng <lifeng@qti.qualcomm.com>
2016-10-27 21:46:04 +03:00
Jouni Malinen
09b306b1e5 tests: Avoid failures in ap_vlan_without_station with new kernel
The kernel commit 'mac80211: filter multicast data packets on AP /
AP_VLAN' started filtering out the test frame used in
ap_vlan_without_station and that resulted in false failures. For now,
ignore that "error" case to avoid claiming failures when the kernel is
doing what it is expected to do.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 21:37:19 +03:00
Jouni Malinen
b64fa750b6 tests: Enable FILS in the example hwsim build configurations
This allows the new FILS test cases to be executed automatically when a
recent enough kernel version is used.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:13 +03:00
Jouni Malinen
befdb2dc8d nl80211: Check driver FILS capability
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:06 +03:00
Jouni Malinen
40a4572738 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
This sends the FILS KEK and AAD context (nonces) to the driver with the
NL80211_CMD_ASSOCIATE messages when using FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
d8f9342d03 nl80211: Add support for setting FILS authentication algorithm
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
e76e950eac Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-10-27.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-27 15:02:08 +03:00
Jouni Malinen
2a0b86d319 Note set_key(WPA_ALG_NONE) failure in debug log
This makes wpa_remove_ptk() call to wpa_auth_set_key() more consistent
with all the other calls that verify the return value to keep static
analyzers happier.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
7d8da7c837 tests: FILS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
061dac1d3c FILS: Claim FILS capability only if driver supports it
"GET_CAPABILITY fils" used to return "FILS" based on wpa_supplicant
configuration. This can be made more useful by checking both for
wpa_supplicant and driver support for FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
ff338fab92 FILS: Setup EAPOL state machines properly after FILS association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
da24c5aa1c FILS: Set TK after association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
07e0117d21 FILS: Mark connection fully authorized after FILS Association (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:20:04 +03:00
Jouni Malinen
706df4291b FILS: Association Response processing (STA)
Decrypt the AES-SIV protected elements and verify Key-Auth. Parse and
configure keys to the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:20:04 +03:00
Jouni Malinen
e73ffa0925 FILS: Add Association Response frame elements and encrypt them (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:42:52 +03:00
Jouni Malinen
78815f3dde FILS: Decrypt Association Request elements and check Key-Auth (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:42:52 +03:00
Jouni Malinen
86cd6928e0 FILS: Add elements to FILS Association Request frame
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-25 20:01:06 +03:00
Jouni Malinen
ac56c39532 driver: Add option to pass FILS KEK/AAD to the driver for association
This allows the FILS KEK and AAD data (nonces) to be configured to the
driver for association so that the driver can encrypt the
(Re)Association Request frame and decrypt the (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-24 23:07:56 +03:00
Sunil Dutt
783c2920cc P2P: Check if the pref_freq reported by the driver supports P2P
Filter out get_pref_freq_list() (i.e.,
QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST) output in case of
channel negotiation by removing channels that do not allow P2P operation
at all. Previously, only the explicitly disallowed channels were removed
and that could have resulted in selecting an operating channel that is
not allowed for P2P and failing to complete the operation to start the
group.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-24 18:37:27 +03:00
Jouni Malinen
a660993772 FILS: Authentication frame processing (STA)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:28:36 +03:00
Jouni Malinen
c4fd6d8aa8 FILS: Process FILS Authentication frame (AP)
This implements processing of FILS Authentication frame for FILS shared
key authentication with ERP and PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:27:01 +03:00
Jouni Malinen
ffb62f2272 FILS: Add a helper function for status code conversion
This will allow the existing code to be reused for FILS needs.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:27:01 +03:00
Jouni Malinen
c1bd4bac5f FILS: Extend wpa_auth_pmksa_get() to support PMKID matching
This is needed for FILS processing to enable PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:13:17 +03:00
Jouni Malinen
c30bd28b14 FILS: Export IEEE 802.1X helper functions
ieee802_1x_encapsulate_radius() and ieee802_1x_alloc_eapol_sm() need to
be called from FILS processing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:13:17 +03:00
Jouni Malinen
a6228b8ed6 ERP: Update client identity based on EAP-Initiate/Re-auth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:13:17 +03:00
Jouni Malinen
f00b9b8864 FILS: Try to use FILS authentication if PMKSA or ERP entry is available
If a PMKSA cache entry for the target AP is available, try to use FILS
with PMKSA caching.

If an ERP key for the target AP is available, try to use FILS with
EAP-Initiate/Re-auth added as Wrapper Data element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 23:13:17 +03:00
Jouni Malinen
2c2c557917 SME: Clear possibly used WPA/RSN IE for new connection
This was already done in the case SME in the driver is used, but the SME
code path was resetting the local WPA/RSN IE only for association. While
that was fine for existing use cases, FILS needs a new RSN IE to be set
for PMKSA caching case in Authentication frames, so clear the local IE
before starting new authentication.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 22:55:27 +03:00
Jouni Malinen
0866ed004d WPA: Add debug print for not-update-own-IEs case
This makes it easier to understand debug logs related to own WPA/RSN IE
selection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 22:55:27 +03:00
Jouni Malinen
14de9e31c4 FILS: Include wpa_insert_pmkid() in non-FT builds
This function is needed for FILS as well as FT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 22:55:27 +03:00
Jouni Malinen
de57d87353 ERP: Make eap_peer_finish() callable
This is needed for FILS to process EAP-Finish/Re-auth.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:26:00 +03:00
Jouni Malinen
c28767e11c ERP: Make eap_peer_erp_reauth_start() available
This needs to be callable through the EAPOL supplicant wrappers to allow
FILS implementation to use ERP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:25:50 +03:00
Jouni Malinen
5b092fb63f nl80211: Make full (Re)Association Response frame available
This is needed for FILS processing since AAD includes data before the
first element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:12:11 +03:00
Jouni Malinen
2aa1e48a45 FILS: Do not clear PTK on FILS Auth/Assoc (AP)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:11:14 +03:00
Jouni Malinen
a852ab4c72 FILS: Key-Auth derivation function for FILS SK
This implements Key-Auth derivation for (Re)Association Request frames
(see P802.11ai/D11.0 12.12.2.6.2) and (Re)Association Response frames
(see P802.11ai/D11.0 12.12.2.6.3).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Jouni Malinen
c089bc5725 FILS: PMK-to-PTK key derivation for FILS authentication
This is the PTKSA key derivation used as part of the FILS authentication
exchange. See P802.11ai/D11.0 12.12.2.5.3.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Jouni Malinen
ce16c489d8 Rename sae_data to more generic auth_data
This makes it cleaner for the FILS implementation to use the same design
for setting Authentication frame elements as was already done with SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Lior David
6eb1a569ca Add QCA vendor command/attr for low level DMG(11ad) RF sector control
Add operations to allow low level control over RF sectors in QCA DMG
(11ad) chipsets. Operations include getting/setting the configuration of
a specific sector, as well as getting/setting the selected sector which
the HW uses to communicate with a specific station.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
2016-10-17 11:43:57 +03:00
Jouni Malinen
a2675b3232 wpa_cli: Mark number of char *cmd constant
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-16 12:30:32 +03:00
Jouni Malinen
e097556eef hostapd_cli: Mark number of char *cmd constant
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-16 12:30:32 +03:00
Mikael Kanstrup
c43cf332c0 wpa_cli: Add completion for ssid config commands
Add network id command completion support for identity, password,
new_password, pin, otp, passphrase, sim and bssid commands.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-10-16 12:29:39 +03:00