Commit graph

1941 commits

Author SHA1 Message Date
Jouni Malinen
8c0ef18199 Fix a typo in unused attribute name 2010-05-25 09:57:22 +03:00
Jouni Malinen
7cc5995845 Skip D-Bus signals if the dbus_path is not yet set
This avoids an invalid D-Bus call during interface initialization.
The wpa_state change can happen before the D-Bus interface is set up,
so we must be preparted to handle this early event signal. In theory,
it should be possible to reorder initialization code to make sure
D-Bus signals are ready, but that would likely require quite a bit of
code restructuring, so it looks like a safer option for now is to just
skip the early event.
2010-05-23 20:23:11 +03:00
Masashi Honma
6db1602d5b bsd: Use set_freq() API for AP mode wpa_supplicant
Previous version driver_bsd.c switches the channel in
wpa_driver_bsd_associate(). This patch changes it to use set_freq().
I have tested this patch on FreeBSD 8.0/NetBSD 5.0.2 with hostapd,
wpa_supplicant(AP) and wpa_supplicant(STA).
2010-05-23 12:20:33 +03:00
Jouni Malinen
25c226ea45 Fix CONFIG_AP=y build without CONFIG_IEEE8021X_EAPOL=y 2010-05-23 12:18:47 +03:00
Masashi Honma
37a86b7b36 Fix: AP mode wpa_supplicant build
The wpa_supplicant compilation with CONFIG_AP option and without
CONFIG_IEEE80211R, CONFIG_WPS, NEED_SME, CONFIG_CLIENT_MLME options
results in following messages.

../src/ap/drv_callbacks.o: In function `hostapd_notif_assoc':
../src/ap/drv_callbacks.c:59: undefined reference to
`ieee802_11_parse_elems'
gmake: *** [wpa_supplicant] Error 1
2010-05-23 12:12:40 +03:00
Jouni Malinen
8401a6b028 Add Linux rfkill support
Add a new wpa_supplicant state: interface disabled. This can be used
to allow wpa_supplicant to be running with the network interface even
when the driver does not actually allow any radio operations (e.g.,
due to rfkill).

Allow driver_nl80211.c and driver_wext.c to start while rfkill is in
blocked state (i.e., when ifconfig up fails) and process rfkill
events to block/unblock WLAN.
2010-05-23 10:27:32 +03:00
Andriy Tkachuk
6deb41e73f Update WPS IE on hostapd reconfiguration
This is needed to handle cases where WPS state may have changed and
hostapd is reloading its configuration.
2010-05-02 11:21:19 +03:00
Kel Modderman
1491f8a785 wpa_gui-qt4: Fix network selection
Use regular expression matches to see if input is not the (now translated?)
string "Select any network" and is a "<network id>: <ssid>" string or the
"all" keyword where that is applicable.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2010-05-02 11:17:13 +03:00
Kel Modderman
adc8d4a791 Fix enabling of networks while another network is being used
Enable a network block, even if there is a current configuration, if it
was disabled.

Signed-off-by: Kel Modderman <kel@otaku42.de>
2010-05-02 11:08:03 +03:00
Jouni Malinen
1bc774a12a hostapd: Reorder some IEs to get closer to IEEE 802.11 standard
Vendor-specific IEs are supposed to be in the end of the frame, so move
WMM into the end of Beacon, Probe Response, and (Re)Association Response
frames. In addition, move HT IEs to be later in (Re)Association
Response to match the correct order.

hostapd_eid_wpa() adds multiple IEs and the end result may not always be
correct. If WPA is enabled, WPA IE (vendor-specific) gets added in the
middle of the frame and not in the end. This would require a larger
change to spliut the IEs from WPA module into separate locations when
constructing Beacon and Probe Response frames. This is not yet addressed.
2010-05-02 10:53:01 +03:00
Jouni Malinen
b4a1256d36 Fix fallback from failed PMKSA caching into full EAP authentication
Commit 83935317a7 added forced
disconnection in case of 4-way handshake failures. However, it should
not have changed the case where the supplicant is requesting fallback
to full EAP authentication if the PMKID in EAPOL-Key message 1/4 is
not know. This case needs to send an EAPOL-Start frame instead of
EAPOL-Key message 2/4.

This works around a problem with APs that try to force PMKSA caching
even when the client does not include PMKID in (re)association request
frame to request it. [Bug 355]
2010-05-01 17:35:28 +03:00
Jouni Malinen
439d4bf960 Fix EAPOL_SM_USES_WPA flag to be set correctly
Commit c02d52b405 removed direct calls
to the WPA authenticator, but the change here was incorrect.
EAPOL_SM_USES_WPA was supposed to be set based on sta->wpa_sm being
set, i.e., no need to check for PMKSA entries for that.

While this could potentially change EAPOL Key TX state machine behavior,
no clear problems have been identified so far. Anyway, better fix this
to get the correct flags set for EAPOL authenticator state machine.
2010-05-01 17:12:59 +03:00
Jouni Malinen
3ab72b626b Fix WPA state machine initialization on WPA_REAUTH if needed
When using WPS, we may end up here if the STA manages to re-associate
without the previous STA entry getting removed. Consequently, we need to
make sure that the WPA state machines gets initialized properly at this
point.
2010-04-23 16:49:50 +03:00
Jouni Malinen
fb2ab5dd6a hostap.git is now 0.8.x development tree
0.7.x for branched into hostap-07.git for stable releases.
2010-04-18 21:01:00 +03:00
Jouni Malinen
0b86f67a29 Add wpa_gui-qt4 translation files into build 2010-04-18 19:15:07 +03:00
Jouni Malinen
4fc387fce8 wpa_gui: lupdate run before release 2010-04-18 19:08:14 +03:00
Jouni Malinen
df9b245e76 wpa_gui: Fix Windows build 2010-04-18 19:06:24 +03:00
Jouni Malinen
be48214d2b Preparations for 0.7.2 release 2010-04-18 18:02:34 +03:00
Jouni Malinen
e4cbe058d6 TNC: Add more debug infor to EAP-TNC server state changes 2010-04-18 12:24:02 +03:00
Jouni Malinen
11804a4ebc TNC: Fix EAP-TNC fragmentation of the last message
62477841a1 tried to address fragmentation
issues, but it did not address the case where the final EAP-TNC
message gets fragmented. Move the state update to the correct place
to address this case, too.
2010-04-18 12:21:56 +03:00
Jouni Malinen
5febb0d272 TNCS: Fix uninit in error case to not double free IMVs 2010-04-18 11:10:46 +03:00
Jouni Malinen
125c74cd80 WPS: Include CONFIG_EAP automatically if WPS is enabled 2010-04-17 22:05:18 +03:00
Jouni Malinen
e0f412b927 atheros: Restore ATH_WPS_IE definition and comment 2010-04-17 21:47:13 +03:00
Jouni Malinen
9b74812032 atheros: Add more robust and complete debug info for ioctl failures 2010-04-17 21:45:34 +03:00
Jouni Malinen
a317d8520e atheros: Update to build with the current driver version 2010-04-17 21:04:26 +03:00
Jouni Malinen
2de5a860a3 Fix build without CONFIG_FULL_DYNAMIC_VLAN 2010-04-17 21:01:35 +03:00
Masashi Honma
5008cb5e55 Support for Solaris default shell restriction
Some shells (like Solaris default /bin/sh) doesn't allow -e
option for file existence check. Use -f instead.
2010-04-17 17:15:23 +03:00
Jouni Malinen
7992b07f6a Remove unnecessary SUBDIRS loops from src/*/Makefile
There are no subdirectories in any of these directories or plans
for adding ones. As such, there is no point in running the loop
that does not do anything and can cause problems with some shells.
2010-04-17 17:10:31 +03:00
Jouni Malinen
e34ce1683c VLAN: Reorder init to get same behavior for all VLAN interfaces
Both the wildcard VLAN entry and the statically configured VLAN
interfaces should behave in the same way. Initializing the
full dynamic VLAN code before adding the statically configured VLAN
interfaces allows the same processing to be applied to both statically
and dynamically added VLAN interface (i.e., also the statically
configured ones will be added to a bridge).
2010-04-17 09:48:27 +03:00
Jouni Malinen
0249c988bb VLAN: Set statically configured VLAN interfaces up
This is needed to be able to bind stations to them with mac80211.
2010-04-17 09:45:18 +03:00
Jouni Malinen
74e259ec7c Do not trigger initial scan if there are no enabled networks
This allows wpa_supplicant to be started quickly with an empty
configuration. If an external program wants to fetch scan results
from wpa_supplicant, it will need to request a scan explicitly
in this type of case.
2010-04-16 18:56:23 +03:00
Jouni Malinen
37eb8da957 nl80211: Fix wpa_supplicant build 2010-04-16 14:13:27 +03:00
Jouni Malinen
b9c3e576cb VLAN: Fix bridge interface clean up for no tagged_interface case 2010-04-16 01:13:46 +03:00
M. Braun
20e2cb0ae0 VLAN: Decrease bridge forwarding delay to avoid EAPOL timeouts 2010-04-16 00:48:32 +03:00
M. Braun
0ab7a701ab nl80211: Fix initial add_ifidx() realloc to not forget values
We need to make a copy of the old entries the first time the
if_indices buffer gets allocated.
2010-04-16 00:39:59 +03:00
M. Braun
97cfcf6482 nl80211: Add bridge interfaces to own ifindex list automatically
Whenever our own interface is added to a bridge, add that bridge
into the list of own interfaces.
2010-04-16 00:36:33 +03:00
M. Braun
37ba0928d5 VLAN: Set dynamic VLAN up to fix STA bind and key setup 2010-04-15 23:54:41 +03:00
Jouni Malinen
cd1d72c1d0 nl80211: Add more debug info on NL80211_ATTR_STA_VLAN failures 2010-04-15 23:46:49 +03:00
Jouni Malinen
4254100d6c Stop processing if STA VLAN bind fails 2010-04-15 23:44:10 +03:00
Jouni Malinen
91faf6b948 VLAN: Clean up debug code and error messages 2010-04-15 20:35:51 +03:00
Jouni Malinen
c47cf42e4b WPS: Fix association when both WPS and WPA/RSN IE are included
The WPS IE was overriding the WPA/RSN IE in driver based MLME case
(hostapd_notif_assoc), but the MLME code here was not using WPS IE
correctly, i.e., it allowed the WPA/RSN IE override the operation.
2010-04-15 12:55:34 +03:00
Jouni Malinen
5fbc1f279b Fix get_interfaces() driver call to use correct drv_priv data 2010-04-14 16:38:53 +03:00
Jouni Malinen
843123590a Fix hostapd build without WPS 2010-04-12 15:15:17 +03:00
Jouni Malinen
0cb445a472 Fix internal DH implementation not to pad shared key
The returned buffer length was hardcoded to be the prime length
which resulted in shorter results being padded in the end. However,
the results from DH code are supposed to be unpadded (and when used
with WPS, the padding is done in WPS code and it is added to the
beginning of the buffer). This fixes WPS key derivation errors
in about 1/256 of runs ("WPS: Incorrect Authenticator") when using
the internal crypto code.
2010-04-12 12:25:21 +03:00
Jouni Malinen
20e26395c8 SME: Fix build without 802.11r or WPS 2010-04-12 09:39:36 +03:00
Jouni Malinen
92aaafe6bd .gitignore for generated language files 2010-04-11 23:00:51 +03:00
Stefan Oswald
7c00f6ba86 wpa_gui: Add Qt translator installation and German translation
This takes QTranslator into use and adds a German translation of
wpa_gui.
2010-04-11 22:58:08 +03:00
Stefan Oswald
0d76b1ab5f wpa_gui: Make Status strings visible to linguist
Linguist cannot see the strings coming from wpa_supplicant, so create
a function that translates these to tr() strings inside wpa_gui
source code.
2010-04-11 22:42:02 +03:00
Stefan Oswald
9086fe4466 wpa_gui: Convert strings to use tr() in user-visible text
This is in preparation for allowing wpa_gui to be translated.
2010-04-11 22:35:02 +03:00
Witold Sowa
c56ce48a6f dbus: Add new KeyMgmt interface capabilities
Add "wpa-ft-psk", "wpa-psk-sha256", "wpa-ft-eap" and "wpa-eap-sha256"
possible KeyMgmt values of interface capabilities to fit values in
BSS RSN options dictionary.
2010-04-11 21:37:28 +03:00