Commit graph

949 commits

Author SHA1 Message Date
Jouni Malinen
51ca03f470 WPS: Document NFC use cases with password/config token
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 21:28:49 +03:00
Jouni Malinen
ffdaa05a6b WPS: Add support for NCF password token from AP
The new hostapd ctrl_iface command WPS_NFC_TOKEN can now be used to
manage AP-as-Enrollee operations with NFC password token. WPS/NDEF
parameters to this command can be used to generate a new NFC password
token. enable/disable parameters can be used to enable/disable use of
NFC password token (instead of AP PIN) for external Registrars.

A preconfigured NFS password token can be used by providing its
parameters with new hostapd.conf fields wps_nfc_dev_pw_id,
wps_nfc_dh_pubkey, wps_nfc_dh_privkey, and wps_nfc_dev_pw. This use
will also depend on WPS_NFC_TOKEN enable/disable commands, i.e., the
configured NFS password token is disabled by default.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 19:43:29 +03:00
Jouni Malinen
3cf7a59d4f WPS: Add new mechanism for generation NFC configuration token
The new hostapd ctrl_iface command WPS_NFC_CONFIG_TOKEN can now be used
to fetch payload for an NFC configuration token so that an external
program can be used to write this on an NFC tag.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-28 13:25:48 +03:00
Jouni Malinen
bb45b6d79a WPS: Add new mechanism for communicating NFC tag read events
hostapd ctrl_iface can now be used to deliver payload from read
operation of an NFC tag. This allows operations without having to have
low-level NFC code within hostapd. For now, the new wps_nfc_tag_read
command can be used with NFC password tokens for the case where the AP
has an NFC device that is used to read an NFC tag from the station
Enrollee.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-27 21:22:13 +03:00
Jouni Malinen
bde7ba6caf RADIUS DAS: Validate Event-Timestamp
DAS will now validate Event-Timestamp value to be within an acceptable
time window (300 seconds by default; can be set using
radius_das_time_window parameter). In addition, Event-Timestamp can be
required in Disconnect-Request and CoA-Request messages with
radius_das_require_event_timestamp=1.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-06-17 17:43:36 +03:00
Baruch Siach
17706d1c76 hostapd: Return error value on configuration check failure
Don't count errors since the number isn't used anyway.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-16 20:30:28 +03:00
Baruch Siach
4929898dab hostapd: Remove redundant variable initialization
The 'errors' variable is initialized later anyway.

Signed-hostap: Baruch Siach <baruch@tkos.co.il>
2012-06-16 20:26:51 +03:00
Jouni Malinen
b6668734ab WNM: Add advertisement of BSS max idle period
If WNM is enabled for the build (CONFIG_WNM=y), add BSS max idle period
information to the (Re)Association Response frame from the AP and parse
this information on the station. For SME-in-wpa_supplicant case, add a
timer to handle periodic transmission of the keep-alive frame. The
actual request for the driver to transmit a frame is not yet
implemented.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-27 17:35:00 -07:00
Dmitry Shmidt
dfb42efb34 wpa_supplicant: Make Android makefiles available under the BSD license
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-05-14 20:34:24 -04:00
Jouni Malinen
ec4a5d32b1 Add ChangeLog entries from v1.0 release
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-10 22:12:07 +03:00
Jouni Malinen
b031338cf0 Add preliminary RADIUS dynamic authorization server (RFC 5176)
This adds the basic DAS mechanism to enable hostapd to be configured
to request dynamic authorization requests (Disconnect-Request and
CoA-Request). This commit does not add actual processing of the
requests, i.e., this will only receive and authenticate the requests
and NAK them regardless of what operation is requested.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-06 22:02:42 +03:00
Jouni Malinen
af35e7af7f hostapd: Allow addition of arbitrary RADIUS attributes
New configuration parameters radius_auth_req_attr and
radius_acct_req_attr can now be used to add (or override) RADIUS
attributes in Access-Request and Accounting-Request packets.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 20:19:56 +03:00
Jouni Malinen
86f6053aa2 hostapd: Add optional Chargeable-User-Identity request (RFC 4372)
radius_request_cui=1 configuration parameter can now be used to
configure hostapd to request CUI from the RADIUS server by including
Chargeable-User-Identity attribute into Access-Request packets.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 18:19:54 +03:00
Jouni Malinen
5daba48ca7 hlr_auc_gw: Use 5 bit IND for SQN updates
Change the SQN generation mechanism to use not time-based Profile 2
as described in 3GPP TS 33.102 Annex C.3.2. The previous implementation
used void IND (i.e.., all of SQN was SEQ1). The new default uses 5 bits
of SQN as IND. The length of IND can be configured on the command line
with the new -i<IND len in bits> parameter. -i0 would make hlr_auc_gw
behave in the same way as the previous implementation.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-05 14:12:42 +03:00
Jouni Malinen
5336861301 hlr_auc_gw: Add support for updating Milenage file SQN
If the new command line argument -u is used, hlr_auc_gw will update
the Milenage file SQN numbers when exiting based on what was the last
SQN used during the process runtime.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-03 22:39:49 +03:00
Jouni Malinen
057a92ec5c hlr_auc_gw: Fix CONFIG_WPA_TRACE=y build
Need to initialize tracing code and use correct free() wrapper.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-05-03 22:05:04 +03:00
Jouni Malinen
762e4ce620 EAP-AKA': Update to RFC 5448
There was a technical change between the last IETF draft version
(draft-arkko-eap-aka-kdf-10) and RFC 5448 in the leading characters
used in the username (i.e., use unique characters for EAP-AKA' instead
of reusing the EAP-AKA ones). This commit updates EAP-AKA' server and
peer implementations to use the leading characters based on the final
RFC.

Note: This will make EAP-AKA' not interoperate between the earlier
draft version and the new version.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-05-02 20:45:01 +03:00
Ben Greear
9d05374796 Make bind failure messages unique
This helps someone know which part of the code is complaining.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-04-06 12:10:36 +03:00
Sujith Manoharan
1ed08baf89 hostapd: Do not allow HT in 11b mode
When the HW mode has been configured as 11b, disable HT
operations.

Signed-hostap: Sujith Manoharan <c_manoha@qca.qualcomm.com>
2012-04-03 12:03:18 +03:00
Anirban Sirkhell
4c374cde2f Add wps_cancel for hostapd_cli
Implement wps_cancel for hostapd similarly to how it was already
supported in wpa_supplicant AP mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-30 11:11:35 +03:00
Jouni Malinen
648cc711a5 GAS server: Add support for ANQP Venue Name element
The new venue_name configuration parameter can now be used to configure
the ANQP Venue Name values that stations can request through GAS.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-26 22:53:22 +02:00
Jay Katabathuni
dca30c3fb7 Interworking: Add GAS server support for AP mode
This adds GAS/ANQP implementation into hostapd. This commit brings in
the basic GAS/ANQP functionality, but only the ANQP Capability List
element is supported.

For testing purposes, hostapd control interface SET command can be used
to set the gas_frag_limit parameter dynamically.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-26 22:52:53 +02:00
Dmitry Shmidt
1e1411b04f Android: Add PLATFORM_VERSION to VERSION_STR_POSTFIX definition
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:38 +02:00
Dmitry Shmidt
5db498920f Android: Add build configuration files
These are from Android wpa_supplicant_8.git initial 0.8.X commit
8d520ff1dc2da35cdca849e982051b86468016d8 with some additional edits and
renaming of .config files to android.config.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-02-25 18:22:34 +02:00
Jithu Jance
e60b295186 Add wpa_supplicant AP mode STA deauthenticate/disassociate commands
Move disassociate and deauthenticate commands to ctrl_iface_ap.c, so
that they ares accessible for wpa_supplicant AP mode and wpa_cli (with
CONFIG_AP option enabled).

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-02-25 17:22:48 +02:00
Jouni Malinen
9d23cff598 hostapd: Allow 'none' driver to be started without ifname
Commit 0dcc4dc4b3 made driver
initialization conditional on interface name being configured. This can
break hostapd-as-RADIUS-server use case where this parameter does not
really make any sense. Fix this with a special case for the none driver.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-16 23:11:29 +02:00
Jouni Malinen
07bcdbb150 Move hostapd_for_each_interface() and hapd_interfaces into src/ap
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:46:27 +02:00
Shan Palanisamy
9e7d033ef4 hostapd: Make sure ctrl_iface is not initialized multiple times
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:44:43 +02:00
Shan Palanisamy
0dcc4dc4b3 Do not call driver_init if hostapd interface is not yet configured
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:43:48 +02:00
Shan Palanisamy
c0971c561f Do not call hapd_deinit if driver was not initialized
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:42:29 +02:00
Shan Palanisamy
31b79e1197 hostapd: Allow config parameters to be set through ctrl_iface
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:36:48 +02:00
Jouni Malinen
a7f5b74d43 Split hostapd security parameter updating into a separate function
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:35:54 +02:00
Shan Palanisamy
ef45bc892d hostapd: Split config item parser into a separate function
This makes it easier to use the configuration file parser for updating
the configuration at run time.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:34:21 +02:00
Shan Palanisamy
31b540ebd5 Clear wpa_psk/passphrase when the other option is configured
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-02-16 19:32:48 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
331f89ff5b Select the BSD license terms as the only license alternative
Simplify licensing terms for hostap.git by selecting the BSD license
alternative for any future distribution. This drops the GPL v2
alternative from distribution terms and from contribution requirements.

The BSD license alternative that has been used in hostap.git (the one
with advertisement clause removed) is compatible with GPL and as such
the software in hostap.git can still be used with GPL projects. In
addition, any new contribution to hostap.git is expected to be licensed
under the BSD terms that allow the changes to be merged into older
hostap repositories that still include the GPL v2 alternative.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:31 +02:00
Dan Harkins
27c9d333d4 EAP-pwd: Describe build option for EAP-pwd
Signed-hostap: Dan Harkins <dharkins@lounge.org>
2012-02-11 12:17:58 +02:00
Jouni Malinen
57d38ddf6b Update copyright notices to include year 2012
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-01 18:59:16 +02:00
Yogesh Ashok Powar
ef01fa7bfa hostapd: Make inactivity polling configurable
hostapd uses the poll method to check if the station is alive
after the station has been inactive for ap_max_inactivity seconds.
Make the poll mechanism configurable so that user can choose to
disconnect idle clients.

This can be especially useful when some devices/firmwares have
restrictions on the number of clients that can connect to the AP
and that limit is smaller than the total number of stations trying
to use the AP.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
2011-12-25 20:57:01 +02:00
Michael Braun
05ab9712b9 Allow WPA passphrase to be fetched with RADIUS Tunnel-Password attribute
This allows per-device PSK to be configured for WPA-Personal using a
RADIUS authentication server. This uses RADIUS-based MAC address ACL
(macaddr_acl=2), i.e., Access-Request uses the MAC address of the
station as the User-Name and User-Password. The WPA passphrase is
returned in Tunnel-Password attribute in Access-Accept. This
functionality can be enabled with the new hostapd.conf parameter,
wpa_psk_radius.

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2011-12-11 13:01:57 +02:00
Arik Nemtsov
4f73d88afa Maintain internal copy of Probe Response offload capabilities
Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Ben Greear
e04a163180 AP: Convert some wpa_printf to wpa_msg/dbg
This generates better log messages when running multiple
interfaces in one process.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-12-10 16:28:14 +02:00
Jouni Malinen
505a36941e Add MSK dump mechanism into hostapd RADIUS server for testing
Testing code can now be enabled in the hostapd RADIUS server to dump
each derived MSK into a text file (e.g., to be used as an input to
wlantest). This functionality is not included in the default build
and can be enabled by adding the following line to hostapd/.config:
CFLAGS += -DCONFIG_RADIUS_TEST

The MSK dump file is specified with dump_msk_file parameter in
hostapd.conf (path to the dump file). If this variable is not set,
MSK dump mechanism is not enabled at run time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-09 00:15:04 +02:00
Bharat Chakravarty
8e5f913456 WPS: Allow RF Bands value to be overridden
A new hostapd.conf parameter, wps_rf_bands, can now be used to fix the
RF Bands value in cases where hw_mode is not set or when operating a
dual band dual concurrent AP.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-30 17:44:43 +02:00
Jouni Malinen
ca84eed7ad TLS: Add build configuration for TLS v1.2 support
This allows the internal TLS implementation to be built for TLS v1.2
support. In addition to the build option, this changes the TLS PRF
based on the negotiated version number. Though, this commit does not
yet complete support for TLS v1.2.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:45:07 +02:00
Jouni Malinen
8307489840 Add implementation of TLS v1.2 PRF (P_SHA256)
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:10:06 +02:00
Jouni Malinen
90cba4e7ab hostapd: Define CONFIG_SHA256 for SHA256 builds
wpa_supplicant was already doing this and hostapd will need to define
this for future additions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-27 21:10:06 +02:00
Jouni Malinen
0bf927a03e Use wpa_key_mgmt_*() helpers
This cleans up the source code and makes it less likely that new AKM
addition misses some needed changes in the future.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-24 22:47:46 +02:00
Dmitry Shmidt
20b2161d5b Android: Move WPA_BUILD check in Android.mk
This is part of commit e61a2d6db6113da5fad91660764afdb0596dbc46 from
Android wpa_supplicant_8.git.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-23 17:58:44 +02:00
Jeff Brown
4482f1fbc4 Android: Remove the simulator target from all makefiles
This is commit bbda627478b0e9a312fea4662cd7cd8d6bdf82bf from
Android wpa_supplicant_8.git.
2011-11-23 17:56:41 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Dan Harkins
4301163930 EAP-pwd: Document group configuration for hostapd authentication server 2011-11-19 16:32:21 +02:00
Jouni Malinen
e9447a94c0 Use a single define for maximum number of EAP methods
This cleans up the code a bit by not having to deal with theoretical
possibility of maximum number of EAP methods to be different between
various components in hostapd.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-17 20:06:33 +02:00
Jouni Malinen
895c643407 Remove unused header file inclusion
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-17 20:01:19 +02:00
Jouni Malinen
7cb03b0eaf Android: Update libnl use to match with Android ICS
The libnl_2 library uses static linking and different path for
header files in the Android ICS release.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-15 18:37:10 +02:00
Jouni Malinen
e4b8ac129b Android: Fix hostapd_cli build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-15 18:34:57 +02:00
Jouni Malinen
dd17f3ec4f Android: Fix hostapd build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-15 18:34:09 +02:00
Jouni Malinen
aea855d752 Move wpa_scan_results_free() into shared C file
Replace the inline helper function with a new C file that can be used
for common driver API related function.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 18:56:26 +02:00
Jouni Malinen
7756114f6a Postpone global_init() call until first driver instance is initialized
This avoids allocating global driver state for driver wrappers that
are built in but not used. This can save some resources and avoids
failures with driver_nl80211.c that is now initializing netlink
connections for nl80211 in global_init().
2011-10-23 13:20:52 +03:00
Jouni Malinen
4b24282a17 hostapd: Call global_init/global_deinit driver_ops
Now both wpa_supplicant and hostapd allow the driver wrappers to use the
global context similarly.
2011-10-22 12:22:59 +03:00
Dmitry Shmidt
8f5b9aa19a Set ANDROID_LOG_NAME depending on application
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-10-21 18:59:42 +03:00
Jouni Malinen
39b97072b2 Add support for Time Advertisement
This adds preliminary support for IEEE 802.11v Time Advertisement
mechanism with UTC TSF offset.
2011-10-18 00:24:16 +03:00
Jouni Malinen
4b2a77aba2 Interworking: Add support for configuring Roaming Consortium List 2011-10-17 23:55:50 +03:00
Jouni Malinen
062390efd4 Start deprecating various AP mode driver_ops
The preferred way of configuring AP mode will be to use set_ap() instead
of number of separate operations hostapd has collected over the years.
2011-10-17 18:35:25 +03:00
Mahesh Palivela
d4370eac2e Move SA Query mechanism into a file that can be shared more easily
This is the first step in allowing SA Query mechanism in hostapd to be
used with drivers that implement authentication and association MLME/SME
(i.e., do not use ieee802_11.c).
2011-10-17 17:33:17 +03:00
Jouni Malinen
71269b3708 WNM: Add BSS Transition Management Request for ESS Disassoc Imminent
"hostapd_cli ess_disassoc (STA addr) (URL)" can now be used to send
an ESS Dissassociation Imminent notification to the STA. This event
is shown in wpa_supplicant ctrl_iface monitors (e.g., wpa_cli):
"WNM: ESS Disassociation Imminent - session_info_url=http://example.com/session/"
2011-10-16 23:55:34 +03:00
Jouni Malinen
b83e3e93c8 IEEE 802.11u: Add configuration and advertisement for Interworking 2011-10-16 23:55:34 +03:00
Mukesh Agrawal
a49214d482 Fix object file list for hlr_auc_gw
If CONFIG_NO_RANDOM_POOL is unset, src/crypto/random.o is linked
into hlr_auc_gw. However, in this configuration, random.o requires
symbols defined in src/utils/eloop.o. So add eloop.o to the object
file list for hlr_auc_gw.
2011-10-15 16:52:51 +03:00
Jouni Malinen
fd2f2d0489 Remove EAP-TTLSv1 and TLS/IA
These protocols seem to be abandoned: latest IETF drafts have expired
years ago and it does not seem likely that EAP-TTLSv1 would be
deployed. The implementation in hostapd/wpa_supplicant was not complete
and not fully tested. In addition, the TLS/IA functionality was only
available when GnuTLS was used. Since GnuTLS removed this functionality
in 3.0.0, there is no available TLS/IA implementation in the latest
version of any supported TLS library.

Remove the EAP-TTLSv1 and TLS/IA implementation to clean up unwanted
complexity from hostapd and wpa_supplicant. In addition, this removes
any potential use of the GnuTLS extra library.
2011-09-25 21:28:32 +03:00
Jouni Malinen
5c47af9a7a TLS: Add support for TLS v1.1 (RFC 4346) with internal TLS
This is disabled by defautl and can be enabled with CONFIG_TLSV11=y
build configuration parameter.
2011-09-25 17:24:46 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
697cd03fc2 AP: Set pairwise/group cipher for non-WPA modes
This is needed to avoid confusing configuration in some nl80211
drivers that the new AP mode configuration alternatives for
setting security policy.
2011-09-15 15:02:59 +03:00
Jouni Malinen
531e420dd7 Remove time.h include from utils/includes.h
os_*() wrappers should be used instead of functions from time.h.
Removing the header from includes.h enforces this. os_unix.c can
include this its uses are valid wrapper calls. wps_upnp.c uses
gmtime() for which there is no os_*() wrapper available yet, so
allow it to use time.h, too. Similarly, allow dump_state.c to
use time.h for ctime().
2011-09-12 22:19:26 +03:00
Jouni Malinen
17f6b90056 WPS: Wait for EAPOL-Start unless WPS 2.0 station as workaround
Extend the code that waits for the station to send EAPOL-Start before
initiating EAPOL authenticator operations to cover the case where the
station includes WPS IE in (Re)Association Request frame if that IE
does not include support for WPS 2.0. While this should not really
be needed, this may help with some deployed WPS 1.0 stations that do
not support EAPOL operations correctly and may get confused of the
EAP-Request/Identity packets that would show up twice if EAPOL-Start
is transmitted.
2011-08-28 19:16:59 +03:00
Jouni Malinen
d0df54caa9 Change example hostapd.conf to use 2.4 GHz channel
This is more likely to work if someone tests the example file with
no or minimal changes.
2011-07-31 00:47:49 +03:00
Pavel Roskin
e783c9b0e5 madwifi: Implement set_freq for hostapd, adjust hostapd.conf
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-07-29 20:51:55 +03:00
Vladimir
b5cb528d70 Fix hostapd_cli linking without CONFIG_WPA_TRACE=y 2011-07-19 08:45:33 +03:00
Jouni Malinen
4283805972 hostapd_cli: Start using src/utils/edit*.c
This brings hostapd_cli closer to the design used in wpa_cli
and allows command history and editing mechanisms to be added.
2011-07-16 17:37:18 +03:00
Jouni Malinen
cb465555d4 Allow PMKSA caching to be disabled on Authenticator
A new hostapd configuration parameter, disable_pmksa_caching=1, can now
be used to disable PMKSA caching on the Authenticator. This forces the
stations to complete EAP authentication on every association when WPA2
is being used.
2011-07-05 17:13:04 +03:00
Jouni Malinen
38e24575c1 random: Add support for maintaining internal entropy store over restarts
This can be used to avoid rejection of first two 4-way handshakes every
time hostapd (or wpa_supplicant in AP/IBSS mode) is restarted. A new
command line parameter, -e, can now be used to specify an entropy file
that will be used to maintain the needed state.
2011-05-31 20:07:11 +03:00
Jouni Malinen
fa5165586f WPS: Add a workaround for Windows 7 capability discovery for PBC
Windows 7 uses incorrect way of figuring out AP's WPS capabilities by
acting as a Registrar and using M1 from the AP. The config methods
attribute in that message is supposed to indicate only the configuration
method supported by the AP in Enrollee role, i.e., to add an external
Registrar. For that case, PBC shall not be used and as such, the
PushButton config method is removed from M1 by default. If pbc_in_m1=1
is included in the configuration file, the PushButton config method is
left in M1 (if included in config_methods parameter) to allow Windows 7
to use PBC instead of PIN (e.g., from a label in the AP).
2011-05-17 19:53:02 +03:00
Jouni Malinen
5dcfb6830e Include nl80211 driver wrapper in default configuration for hostapd 2011-05-16 21:07:47 +03:00
Guy Eilam
5b73735ba0 hostapd: Fix interfaces.iface initialization
Set all the interfaces.iface pointers to NULL after the allocation of
that memory block for cases those pointers are accessed during each of
the interfaces initialization process (hostapd_interface_init()). One
example for such case is during WPS initialization when the code tries
to fetch the uuid from each of the interfaces.

Signed-off-by: Guy Eilam <guy@wizery.com>
2011-04-15 18:13:04 +03:00
Jouni Malinen
2fee890af7 Add driver capa flag for EAPOL TX status and store capa in hostapd 2011-03-29 17:36:06 +03:00
Jouni Malinen
d47fa330b8 random: Read /dev/random in the background with eloop read socket
This makes it more likely to be able to fetch the 20 octet seed from
/dev/random in cases where other programs may also be competing for
this.
2011-03-22 23:15:00 +02:00
Jouni Malinen
cd9fc7869a hostapd: Add testing mode for RSN element extensions
CFLAGS += -DCONFIG_RSN_TESTING in .config and rsn_testing=1 in
hostapd.conf can now be used to enable a testing mode that adds
extensions to RSN element. This can be used to check whether
station implementations are incompatible with future extensions
to the RSN element.
2011-03-21 13:59:05 +02:00
Johannes Berg
2f646b6e83 WPS: Store (secondary) device type as binary
Instead of converting back and forth from the string representation,
always use the binary representation internally.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-03-17 18:50:22 +02:00
Jouni Malinen
586bad514b Make the link process quieter unless V=1 is specified
Hide the long command lines used for linking the binaries in the
default build. "make V=1" can be used to show the actual commands
if needed.
2011-03-17 12:31:38 +02:00
Jouni Malinen
61fbd3df04 Fix couple of typos in comments 2011-03-11 12:12:36 +02:00
Shan Palanisamy
d7956add9c FT: Make FT-over-DS configurable (hostapd.conf ft_over_ds=0/1) 2011-03-06 14:31:42 +02:00
Dmitry Shmidt
9fc6aa9f95 Add Android make files for hostapd and wpa_supplicant 2011-02-27 19:19:43 +02:00
Jouni Malinen
9e0749737c Update copyright notices to include the new year 2011-02-27 12:50:00 +02:00
Jouni Malinen
9d832bd07d Remove obsolete comments about libnl 1.1 being new 2011-02-21 23:41:56 +02:00
Helmut Schaa
f39b07d7ed hostapd: Allow coexistance of HT BSSes with WEP/TKIP BSSes
In multi BSS setups it wasn't possible to set up an HT BSS in
conjunction with a WEP/TKIP BSS. HT needed to be turned off entirely
to allow WEP/TKIP BSSes to be used.

In order to allow HT BSSes to coexist with non-HT WEP/TKIP BSSes add a
new BSS conf attribute "disable_11n" which disables HT capabilities on a
single BSS by suppressing HT IEs in the beacon and probe response
frames. Furthermore, mark all STAs associated to a WEP/TKIP BSS as
non-HT STAs. The disable_11n parameter is used internally; no new entry
is parsed from hostapd.conf.

This allows a non-HT WEP/TKIP BSS to coexist with a HT BSS without
having to disable HT mode entirely. Nevertheless, all STAs associated to
the WEP/TKIP BSS will only be served as if they were non-HT STAs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2011-02-21 17:27:16 +02:00
Jouni Malinen
2944824315 hostapd: Add require_ht configuration parameter
This can be used to configure hostapd to reject association with
any station that does not support HT PHY.
2011-02-09 15:08:47 +02:00
Jouni Malinen
d601247ca9 P2P: Allow WPS_PBC command on GO to select on P2P Device Address
An optional parameter, p2p_dev_addr, can now be given to WPS_PBC
command on P2P GO to indicate that only the P2P device with the
specified P2P Device Address is allowed to connect using PBC. If
any other device tries to use PBC, a session overlap is indicated
and the negotiation is rejected with M2D. The command format for
specifying the address is "WPS_PBC p2p_dev_addr=<address>", e.g.,
WPS_PBC p2p_dev_addr=02:03:04:05:06:07

In addition, show the PBC session overlap indication as a WPS failure
event on an AP/GO interface. This particular new case shows up as
"WPS-FAIL msg=4 config_error=12".
2011-02-07 18:28:36 +02:00
Ben Greear
379ff7b9d4 hostapd: Add iface-name wpa_msg() callback registration
This allows the interface name to be automatically
added to log file lines by the core logging logic.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-06 20:50:32 +02:00
Ben Greear
b41a47c03f hostapd: Allow logging to file
Also supports 'relog' CLI command to re-open the log file.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-02-06 20:24:16 +02:00
Johannes Berg
6905dcb1e0 AP: Introduce sta authorized wrappers
To enable making state change notifications on the WLAN_STA_AUTHORIZED
flag, introduce ap_sta_set_authorized(), and to reduce use of the flag
itself also add a wrapper for testing the flag: ap_sta_is_authorized().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-02-02 16:52:32 +02:00
Johannes Berg
d2da224948 AP: Enable WMM with default parameters by default for HT
If WMM is not disabled explicitly (wmm_enabled=0 in hostapd.conf),
enable WMM automatically whenever HT (ieee80211n) is enabled. Use
the default WMM parameters for AP TX queues and the EDCA parameters
advertised for stations in WMM IE if no overriding values are
included in the configuration.
2011-02-01 14:34:12 +02:00
Mike Crowe
9669794dc4 hostapd: Ensure that the destination directory exists
Ensure that the destination binary directory exists before installing
into it.

Signed-off-by: Mike Crowe <mac@mcrowe.com>
2011-01-30 21:33:17 +02:00
Mike Crowe
590595edba Use DESTDIR when installing hostapd to support cross-compiling
Signed-off-by: Mike Crowe <mac@mcrowe.com>
2011-01-30 21:32:44 +02:00
Jouni Malinen
1161ff1ef5 hostapd: Allow TDLS use to be prohibited in the BSS
tdls_prohibit=1 and tdls_prohibit_chan_switch=1 and now be used to
disable use of TDLS or TDLS channel switching in the BSS using
extended cabilities IE as defined in IEEE 802.11z.
2011-01-28 19:21:59 +02:00
Johannes Berg
0d7e5a3a29 Allow AP mode to disconnect STAs based on low ACK condition
The nl80211 driver can report low ACK condition (in fact it reports
complete loss right now only). Use that, along with a config option, to
disconnect stations when the data connection is not working properly,
e.g., due to the STA having went outside the range of the AP. This is
disabled by default and can be enabled with disassoc_low_ack=1 in
hostapd or wpa_supplicant configuration file.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-12-28 17:15:01 +02:00
Jouni Malinen
51e2a27a21 hostapd_driver_ops reduction
set_sta_vlan, get_inact_sec, sta_deauth, sta_disassoc, and sta_remove
to use inline functions instead of extra abstraction.
2010-11-24 15:36:02 +02:00
Jouni Malinen
bbb921daaa Maintain internal entropy pool for augmenting random number generation
By default, make hostapd and wpa_supplicant maintain an internal
entropy pool that is fed with following information:

hostapd:
- Probe Request frames (timing, RSSI)
- Association events (timing)
- SNonce from Supplicants

wpa_supplicant:
- Scan results (timing, signal/noise)
- Association events (timing)

The internal pool is used to augment the random numbers generated
with the OS mechanism (os_get_random()). While the internal
implementation is not expected to be very strong due to limited
amount of generic (non-platform specific) information to feed the
pool, this may strengthen key derivation on some devices that are
not configured to provide strong random numbers through
os_get_random() (e.g., /dev/urandom on Linux/BSD).

This new mechanism is not supposed to replace proper OS provided
random number generation mechanism. The OS mechanism needs to be
initialized properly (e.g., hw random number generator,
maintaining entropy pool over reboots, etc.) for any of the
security assumptions to hold.

If the os_get_random() is known to provide strong ramdom data (e.g., on
Linux/BSD, the board in question is known to have reliable source of
random data from /dev/urandom), the internal hostapd random pool can be
disabled. This will save some in binary size and CPU use. However, this
should only be considered for builds that are known to be used on
devices that meet the requirements described above. The internal pool
is disabled by adding CONFIG_NO_RANDOM_POOL=y to the .config file.
2010-11-24 01:29:40 +02:00
Jouni Malinen
e5851439e3 Fix hlr_auc_gw build with CONFIG_WPA_TRACE=y 2010-11-24 01:10:48 +02:00
Jouni Malinen
3642c4313a Annotate places depending on strong random numbers
This commit adds a new wrapper, random_get_bytes(), that is currently
defined to use os_get_random() as is. The places using
random_get_bytes() depend on the returned value being strong random
number, i.e., something that is infeasible for external device to
figure out. These values are used either directly as a key or as
nonces/challenges that are used as input for key derivation or
authentication.

The remaining direct uses of os_get_random() do not need as strong
random numbers to function correctly.
2010-11-24 01:05:20 +02:00
Jouni Malinen
5bf49c346c Drop local stations on broadcast deauth/disassoc request
When hostapd_cli deauth/disassoc is used with ff:ff:ff:ff:ff:ff
address, drop all local STA entries in addition to sending out the
broadcast deauth/disassoc frame.
2010-11-10 17:09:31 +02:00
Jouni Malinen
1b6dbec626 Fix a typo in the comment 2010-11-10 14:23:57 +02:00
Yogesh Ashok Powar
6950b2caa8 hostapd: Prohibit WEP configuration when HT is enabled
WFA 11n testing does not allow WEP when IEEE 802.11n is enabled.
Reject such combination when parsing hostapd configuration file.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2010-11-09 16:49:03 +02:00
Helmut Schaa
f5798bf36a hostapd: Add comment about CONFIG_FULL_DYNAMIC_VLAN to defconfig
Add comment about CONFIG_FULL_DYNAMIC_VLAN to defconfig. By default
this feature is still disabled.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2010-11-09 16:38:59 +02:00
Felix Fietkau
d3b4286967 Allow client isolation to be configured (ap_isolate=1)
Client isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging is
allowed.
2010-11-09 16:27:15 +02:00
Felix Fietkau
d38ae2ea85 Add bridge handling for WDS STA interfaces
By default, add them to the configured bridge of the AP interface
(if present), but allow the user to specify a separate bridge.
2010-11-09 16:12:42 +02:00
Jouni Malinen
7e3c178142 Remove unused TX queue parameters related to Beacon frames
These are not used by any driver wrapper, i.e., only the four
data queues (BK, BE, VI, VO) are configurable. Better remove these
so that there is no confusion about being able to configure
something additional.
2010-11-05 01:23:17 +02:00
Jouni Malinen
acec8d3203 Add ctrl_iface command 'GET version'
This can be used to fetch the wpa_supplicant/hostapd version
string.
2010-10-31 17:07:31 +02:00
Dmitry Shmidt
ae6e1bee67 Add WPA_IGNORE_CONFIG_ERRORS option to continue in case of bad config
This is an option to continue with wpa_supplicant and hostapd even if
config file has errors. The problem is that these daemons are the best
"candidates" for the config change, so if they can not start because
config file was let's say corrupted, you can not fix it easily.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2010-10-31 12:38:49 +02:00
Jouni Malinen
450eddcfae hostapd: Add wps_config ctrl_interface command for configuring AP
This command can be used to configure the AP using the internal
WPS registrar. It works in the same way as new AP settings received
from an ER.
2010-10-21 16:49:41 +03:00
Jouni Malinen
2c8a4eef41 WPS: Update Beacon/ProbeResp IE on wps_version_number changes
This test command is supposed to change the WPS version number in all
places immediately, so make sure that the IEs used in management
frames get updated immediately.
2010-10-19 19:57:01 +03:00
Jouni Malinen
dce044cce5 P2P: Extend P2P manager functionality to work with driver MLME
Add P2P IE into Beacon, Probe Response, and (Re)Association Request
frames for drivers that generate this frames internally.
2010-10-08 18:16:07 +03:00
Jouni Malinen
088a225586 Fix hostapd_cli get_config not to show key when WPA is disabled
Previously, incorrectly configured passphrase or group cipher type
could be shown even if WPA was disabled.
2010-10-08 17:36:52 +03:00
Jouni Malinen
01cf713e51 Fix .gitignore files to not ignore subdirectory matches
The previous used .gitignore files were mathing some files that
were actually already in the repository (e.g.,
hostapd/logwatch/hostapd). Avoid this by listing the conflicting
entries in the root directory .gitignore with full path.
2010-10-07 11:04:16 +03:00
Jouni Malinen
235f69fcd6 Mark ctrl_iface RX debug for PING commands excessive
This cleans up debug log from unnecessary entries when using
wpa_cli/hostapd_cli or other ctrl_iface monitors that PING
periodically to check connectivity.
2010-09-24 15:50:13 -07:00
Jouni Malinen
f61039c75f WPS 2.0: Disable WPS if ignore_broadcast_ssid or WEP is used
These combinations are disallowed in WPS 2.0 (and do not work well
(or at all) with many deployed WPS 1.0 devices either).
2010-09-24 15:17:03 -07:00
Jouni Malinen
403b96fe4f WPS: Add hostapd_cli get_config command
This can be used by a WPS UI to display the current AP configuration.
2010-09-23 12:02:28 -07:00
Jouni Malinen
3981cb3cb8 WPS: Add wps_check_pin command for processing PIN from user input
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
2010-09-23 10:30:52 -07:00
Jouni Malinen
b4e34f2fdf WPS: Make testing operations configurable at runtime
Instead of build time options (CONFIG_WPS_TESTING_EXTRA_CRED and
CONFIG_WPS_EXTENSIBILITY_TESTING), use a single build option
(CONFIG_WPS_TESTING) and runtime configuration of which testing
operations are enabled. This allows a single binary to be used
for various tests.

The runtime configuration can be done through control interface
with wpa_cli/hostapd_cli commands:
Enable extensibility tests:
set wps_version_number 0x57
Disable extensibility tests (WPS2 build):
set wps_version_number 0x20
Enable extra credential tests:
set wps_testing_dummy_cred 1
Disable extra credential tests:
set wps_testing_dummy_cred 0
2010-09-21 19:51:23 -07:00
Dan Harkins
df684d82ff EAP-pwd: Add support for EAP-pwd server and peer functionality
This adds an initial EAP-pwd (RFC 5931) implementation. For now,
this requires OpenSSL.
2010-09-14 21:51:40 -10:00
Jouni Malinen
31fd64cc2f P2P: Add forgotten allow_cross_connection example 2010-09-09 07:17:20 -07:00
Jouni Malinen
962473c136 P2P: Add preliminary P2P Manager AP support for hostapd 2010-09-09 07:17:18 -07:00
Jouni Malinen
cae67937ca WPS: Fix CONFIG_WPS_STRICT build option
This was not supposed to be depending on CONFIG_WPS_NFC.
2010-09-09 06:07:49 -07:00
Jouni Malinen
53587ec183 WPS 2.0: Make WSC 2.0 support to be build option (CONFIG_WPS2)
For now, the default build will only include WSC 1.0 support.
CONFIG_WPS2=y can be used to add support for WSC 2.0.
2010-09-09 06:07:48 -07:00
Jouni Malinen
54f489be45 WPS 2.0: Validate WPS attributes in management frames and WSC messages
If CONFIG_WPS_STRICT is set, validate WPS IE(s) in management frames and
reject the frames if any of the mandatory attributes is missing or if an
included attribute uses an invalid value. In addition, verify that all
mandatory attributes are included and have valid values in the WSC
messages.
2010-09-09 06:07:48 -07:00
Jouni Malinen
6a857074f4 WPS 2.0: Add virtual/physical display and pushbutton config methods 2010-09-09 06:07:47 -07:00
Jouni Malinen
31fcea931d WPS 2.0: Add support for AuthorizedMACs attribute
Advertize list of authorized enrollee MAC addresses in Beacon and
Probe Response frames and use these when selecting the AP. In order
to provide the list, the enrollee MAC address should be specified
whenever adding a new PIN. In addition, add UUID-R into
SetSelectedRegistrar action to make it potentially easier for an AP
to figure out which ER sent the action should there be multiple ERs
using the same IP address.
2010-09-09 06:07:47 -07:00
Jouni Malinen
b070460b1a Fix hostapd build with CONFIG_IEEE80211N but without NEED_AP_MLME 2010-09-05 12:41:15 +03:00
Jouni Malinen
5a1cc30f1a WPS: Add support for dynamic AP PIN management
A new hostapd_cli command, wps_ap_pin, can now be used to manage
AP PIN at runtime. This can be used to generate a random AP PIN and
to only enable the AP PIN for short period (e.g., based on user
action on the AP device). Use of random AP PIN that is only enabled
for short duration is highly recommended to avoid security issues
with a static AP PIN.
2010-08-24 16:35:37 +03:00
Jouni Malinen
7f6ec672ea EAP server: Add support for configuring fragment size 2010-07-20 22:56:10 -07:00
Jouni Malinen
a33c5f96b8 Fix a typo in Disassociation frame building
This did not really change any behavior since Deauthentication frame
uses the same format.
2010-07-17 20:23:20 -07:00
Jouni Malinen
be48214d2b Preparations for 0.7.2 release 2010-04-18 18:02:34 +03:00
Jouni Malinen
125c74cd80 WPS: Include CONFIG_EAP automatically if WPS is enabled 2010-04-17 22:05:18 +03:00
Masashi Honma
5008cb5e55 Support for Solaris default shell restriction
Some shells (like Solaris default /bin/sh) doesn't allow -e
option for file existence check. Use -f instead.
2010-04-17 17:15:23 +03:00
Jouni Malinen
488d0934ab hostapd_cli: Add deauth/disassoc commands to usage help 2010-04-11 21:00:16 +03:00
Yogesh Ashok Powar
721abef9b3 Allow advertising of U-APSD functionality in Beacon
hostapd does not implement UAPSD functionality. However, if U-APSD
functionality is implemented outside hostapd, add support to advertise
the functionality in beacon.

Signed-off-by: yogeshp@marvell.com
2010-04-11 11:32:15 +03:00
Jouni Malinen
b242d398f8 Use more os.h wrapper functions in hostapd_cli 2010-04-07 11:40:34 +03:00
Gregory Detal
bae9217474 Add support for action scripts in hostapd_cli 2010-04-07 11:14:54 +03:00
Gregory Detal
bb437f282b AP: Add wpa_msg() events for EAP server state machine 2010-04-07 11:13:14 +03:00
Michael Buesch
2c657c8dcd hostapd: Use cp -f in make install
If hostapd is running, a make install fails with
cp: cannot create regular file `/usr/local/bin/hostapd': Text file busy

Use cp -f to avoid this error and force-override the file.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
2010-04-06 17:12:17 +03:00
Jouni Malinen
b91ab76e8c Add test commands for sending deauth/disassoc without dropping state
This can be used to test 802.11w by sending a protected or unprotected
deauth/disassoc frame.

hostapd_cli deauth <dst addr> test=<0/1>
hostapd_cli disassoc <dst addr> test=<0/1>

test=0: unprotected
test=1: protected
2010-03-29 12:01:40 -07:00
Jouni Malinen
90a3206a14 Add deauthenticate/disassociate ctrl_iface commands 2010-03-29 11:14:57 -07:00
Jouni Malinen
921a278604 Fix a typo in r1kh config parameter description
The second item on the line is R1KH-ID, not R0KH-ID.
2010-03-07 21:16:42 +02:00
Jouni Malinen
23e2550c0e Remove unneeded CONFIG_EAP comments
These are not needed for WPS builds since CONFIG_WPS=y enables all
the needed EAP components.
2010-03-06 16:40:53 +02:00
Jouni Malinen
94d9bfd59b Rename EAP server source files to avoid duplicate names
This makes it easier to build both EAP peer and server functionality
into the same project with some toolchains.
2010-02-19 18:54:07 +02:00
Jouni Malinen
dff0f701d0 Preparations for v0.7.1 release 2010-01-16 19:04:38 +02:00
Jouni Malinen
94627f6cc8 hostapd: Detect bridge interface automatically
This makes the bridge parameter unnecessary for cases where the interface
is already in a bridge and sysfs is mounted to /sys so that the detection
code works.

For nl80211, the bridge parameter can be used to request the AP
interface to be added to the bridge automatically (brctl may refuse to
do this before hostapd has been started to change the interface mode).
If needed, the bridge interface is also created.
2010-01-16 15:19:58 +02:00
Jouni Malinen
73b217570c Fix linking of nt_password_hash
Need to use conditional linking of some crypto functionality and add
couple of additional object files. [Bug 343]
2010-01-16 10:38:53 +02:00
Jouni Malinen
f5455a2dbd Verify that os_get_random() success for SA Query id 2010-01-10 22:28:21 +02:00
Jouni Malinen
9a8d8b3db5 Close config file on error path 2010-01-09 22:29:41 +02:00
Masashi Honma
953f0f6333 bsd: Add support for WPA_TRACE and WPA_TRACE_BFD
On FreeBSD 8.0, WPA_TRACE and WPA_TRACE_BFD functionality build fails.
2010-01-09 11:01:12 +02:00
Jouni Malinen
d1f9c410c1 Remove src/drivers/scan_helpers.c
Most of this file was already moved into wpa_supplicant/scan.c and
we can remove the file completely by having couple of small helper
functions copied to the remaining users outside core wpa_supplicant
code.
2010-01-03 20:27:32 +02:00
Jouni Malinen
9078adfc8c hostapd: Fix deinit on initialization failure 2010-01-03 10:54:14 +02:00
Jouni Malinen
f7c4783379 Split hostapd_interface_deinit() into deinit and free parts
This allows the driver interface to be deinitialized before
struct hostapd_data instance gets freed. This needs to be done so
that the driver wrapper does not maintain a context pointer to
freed memory.
2009-12-27 21:31:13 +02:00
Jouni Malinen
81f4f6195e Include header files explicitly in *.c, not via header files 2009-12-26 00:31:51 +02:00
Jouni Malinen
6226e38d00 Rename some src/ap files to avoid duplicate file names
Doxygen and some build tools may get a bit confused about same file
name being used in different directories. Clean this up a bit by
renaming some of the duplicated file names in src/ap.
2009-12-26 00:05:40 +02:00
Jouni Malinen
1b56c26c40 Get rid of direct hostapd_for_each_interface() calls
src/ap/*.c must not call functions in hostapd or wpa_supplicant
directories directly, so avoid this by using a callback function
pointer.
2009-12-25 20:12:26 +02:00
Jouni Malinen
70db2ab308 Move rest of the generic AP mode functionality into src/ap 2009-12-25 20:06:07 +02:00
Jouni Malinen
8c5fe31fe8 Move driver deinitialization away from hostapd.c
This matches with the earlier change of moving driver initialization
and allows more control on how the driver context is managed.
2009-12-25 18:32:44 +02:00
Jouni Malinen
a4f2110934 Clean up some of the hostapd.h function prototype definitions
Not all prototypes in hostapd.h really belong there. This is an initial
step in cleaning that up.
2009-12-25 14:20:35 +02:00
Jouni Malinen
0aef3ec832 Move hostapd_prune_associations() into ap/utils.c 2009-12-25 14:06:26 +02:00
Jouni Malinen
c442055ecf Move WPA authenticator glue code into a separate file 2009-12-25 14:02:17 +02:00
Jouni Malinen
2586bc64d0 Move authentication server setup into separate file 2009-12-25 13:43:43 +02:00
Jouni Malinen
ad44e244b1 Move iapp.c into src/ap 2009-12-25 13:04:45 +02:00
Jouni Malinen
0e2d35c614 Move ctrl_iface_ap.c into src/ap 2009-12-25 12:25:55 +02:00
Jouni Malinen
e5f2b59c7e Move hostapd driver initialization away from hostapd.c
This makes it easier to customize AP mode initialization for
wpa_supplicant.
2009-12-25 12:21:11 +02:00
Jouni Malinen
bee07ce805 hostapd: Do not call eloop_terminate() on interface setup failure
The caller is able to handle the error code properly and there is no
need to forcefully stop the eloop run here.
2009-12-25 11:51:20 +02:00
Jouni Malinen
32da61d9c9 Move wps_hostapd.c into src/ap 2009-12-25 01:26:37 +02:00
Jouni Malinen
1057d78eb8 Move generic AP functionality implementation into src/ap
This code can be shared by both hostapd and wpa_supplicant and this
is an initial step in getting the generic code moved to be under the
src directories. Couple of generic files still remain under the
hostapd directory due to direct dependencies to files there. Once the
dependencies have been removed, they will also be moved to the src/ap
directory to allow wpa_supplicant to be built without requiring anything
from the hostapd directory.
2009-12-25 01:12:50 +02:00
Jouni Malinen
6d1278e998 Remove direct driver calls from tkip_countermeasures.c 2009-12-25 00:39:22 +02:00
Jouni Malinen
2ce86d9d72 Remove direct driver calls from ieee802_11.c 2009-12-25 00:35:10 +02:00
Jouni Malinen
bdee6fceb9 Remove direct driver calls from sta_info.c 2009-12-25 00:30:16 +02:00
Jouni Malinen
36592d31c1 Remove direct driver calls from vlan_init.c 2009-12-25 00:17:07 +02:00
Jouni Malinen
677449b97e Remove direct driver calls from beacon.c 2009-12-25 00:10:31 +02:00
Jouni Malinen
2f3e0bd4d4 Remove need for direct driver calls from ieee802_11_auth.c 2009-12-24 23:49:19 +02:00
Jouni Malinen
d24df7c33d Avoid direct call to hostapd_new_assoc_sta from ieee802_11.c 2009-12-24 23:42:13 +02:00
Jouni Malinen
a2de634d1c Removed hostapd_new_assoc_sta() from driver wrapper API
This is not called directly by any of the driver wrappers anymore, so
the function can be removed from driver.h and drv_callbacks.c.
2009-12-24 23:30:32 +02:00
Jouni Malinen
94709ea358 Avoid a direct call to drv_callbacks.c from beacon.c 2009-12-24 23:20:53 +02:00
Jouni Malinen
010401fe65 Move hostapd_set_drv_ieee8021x() into ap_drv_ops 2009-12-24 23:17:11 +02:00
Jouni Malinen
4c2ddda495 Move hostapd-to-driver flag mapping to be within ap_drv_ops.c 2009-12-24 23:11:16 +02:00
Jouni Malinen
d3b86aed73 Move wpa_drivers dependency into config_file.c
This cleans up config.o from driver wrapper dependencies.
2009-12-24 22:50:17 +02:00
Jouni Malinen
a3d4fafa41 Remove direct driver calls from accounting.c 2009-12-24 22:24:57 +02:00
Jouni Malinen
41d719d6e0 Move hostapd configuration parser into separate file
config.c includes now only the generic helper functions that are needed
both for hostapd and the AP mode operations in wpa_supplicant.
hostapd/config_file.c is only needed for hostapd.
2009-12-24 21:05:40 +02:00
Jouni Malinen
45cefa0bf3 Move more driver ops into struct hostapd_driver_ops
This removes need to include driver_i.h into ieee802_1x.c.
2009-12-24 20:41:30 +02:00
Jouni Malinen
579bc0e64c Move hostapd_set_privacy() call to hostapd.c
IEEE 802.1X code does not need to know about this driver configuration
mechanism and all the other calls were already in hostapd.c.
2009-12-24 20:18:55 +02:00
Jouni Malinen
c90933d2a3 Use hostapd driver op wrapper for send_mgmt_frame 2009-12-24 20:13:44 +02:00
Jouni Malinen
14f7938660 Merge driver ops set_wps_beacon_ie and set_wps_probe_resp_ie
set_ap_wps_ie() is not used to set WPS IE for both Beacon and Probe
Response frames with a single call. In addition, struct wpabuf is used
instead of separate u8* and length fields. This avoids duplicated
allocation of the IEs and simplifies code in general.
2009-12-24 19:46:06 +02:00
Jouni Malinen
bf65bc638f hostapd: Use separate driver operations abstraction
It would be bettet to avoid including driver_i.h, i.e., direct driver
operation calls from hostapd components. This is an initial step in
that direction for WPS IE updates.
2009-12-24 16:15:22 +02:00
Felix Fietkau
fbbfcbac29 hostapd: Add WDS (4-address frame) mode with per-station interfaces
This mode allows associated stations to use 4-address frames to allow
layer 2 bridging to be used. At least for the time being, this is only
supported with driver=nl80211.
2009-12-24 11:46:22 +02:00
Jouni Malinen
96603e4fe1 Comment CONFIG_WPA_TRACE_BFD=y out by default 2009-12-23 23:20:11 +02:00
Jouni Malinen
79d6c85ffd Fix memory leak in config freeing
Both supported_rates and basic_rates arrays must be freed when freeing
hostapd configuration.
2009-12-21 22:22:49 +02:00
Jouni Malinen
094393b144 Copy config_methods and device_type configuration for AP mode 2009-12-21 16:10:21 +02:00
Jouni Malinen
c0e4dd9eeb WPS: Make Config Methods configurable for wpa_supplicant
This adds config_methods configuration option for wpa_supplicant
following the design used in hostapd. In addition, the string is
now parsed in common code from src/wps/wps_common.c and the list
of configurable methods include all the defined methods from
WPS 1.0h spec.
2009-12-21 15:59:25 +02:00
Jouni Malinen
f3f2eeba01 WPS: Add option for forcing Registrar to use PSK format in Credential
The use_psk_key parameter can now be used to force the Registrar to
use PSK format instead of ASCII passphrase when building a Credential
for the Enrollee. For now, this is not enabled, but it could be enabled
either based on external (to WPS) configuration or automatically set
based on some WPS attribute values from the Enrollee.
2009-12-21 12:46:19 +02:00
Jouni Malinen
0ae687bd10 AP: Allow both WPA passphrase and PSK to be configured
Instead of dropping the configured PSK and deriving it based on
passphrase, use the provided PSK as-is and also maintain a copy of
the passphrase since it can be of use later. This allows both values
to be configured without havign to derive the PSK every time the
network is initialized.
2009-12-21 12:11:08 +02:00
Jouni Malinen
b22b41ee87 Describe tracing build options for developers 2009-12-20 23:41:06 +02:00
Jouni Malinen
f2f7d965b8 Add option libbfd support for tracing code
CONFIG_WPA_TRACE=y and CONFIG_WPA_TRACE_BFD=y can now be used to get
even more complete symbols (func/file/line and inline functions) for
backtraces.
2009-12-20 23:35:06 +02:00
Jouni Malinen
3433ed8c03 hostapd_cli: Use os_program_{init,deinit} 2009-12-19 22:26:36 +02:00
Jouni Malinen
fb4baa688b Add memory allocation analyzer to verify OS wrapper use
WPA_TRACE=y builds will now verify that memory allocation in done
consistently using os_{zalloc,malloc,realloc,strdup,free} (i.e., no
mixing of os_* functions and unwrapper functions). In addition, some
common memory allocation issues (double-free, memory leaks, etc.) are
detected automatically.
2009-12-19 21:47:56 +02:00
Jouni Malinen
80d77c31ff hostapd: Call os_program_{init,deinit}() 2009-12-19 20:55:17 +02:00
Jouni Malinen
0456ea16d8 eloop: Remove global user data pointer
This is not really needed since all signal handlers can use a context
pointer provided during signal handler registration.
2009-12-19 19:22:16 +02:00
Jouni Malinen
9969e5a46a Make hostapd_for_each_interface() take context pointer as argument
This removes need for using eloop_get_user_data().
2009-12-19 19:07:31 +02:00
Jouni Malinen
930f704aac Add backtrace support for debugging
WPA_TRACE=y can now be used to enable internal backtrace support that
will provide more details about implementation errors, e.g., when some
resources are not released correctly. In addition, this will print out
a backtrace automatically if SIGSEGV is received.
2009-12-19 18:40:54 +02:00
Jouni Malinen
1489e11a94 Make struct radius_msg private to radius.c
This is internal data structure for RADIUS message handling and
external code should not touch it directly.
2009-12-19 17:26:57 +02:00
Jouni Malinen
9e7245bdb4 Change radius_msg_free() to free the buffer
Since all callers were freeing the buffer immediately anyway, move
this operation into radius_msg_free() to reduce code size.
2009-12-19 16:34:41 +02:00
Jouni Malinen
b57e086cc1 Mark management frame processing functions to use const buffer 2009-12-13 23:25:30 +02:00
Jouni Malinen
ba091c06c5 Mark ieee802_11_parse_elems() input and parsed elems const
In addition, re-order IE pointers and u8 length so that the shorter
length fields are together to allow compiler to optimize structure size.
2009-12-13 23:11:11 +02:00
Jouni Malinen
f8b1f69561 Use generic driver events for TX status and RX reporting
Replace driver wrapper calls to hostapd_tx_status(),
hostapd_rx_from_unknown_sta(), hostapd_mgmt_rx(), and
hostapd_mgmt_tx_cb() with new generic driver events
EVENT_TX_STATUS, EVENT_RX_FROM_UNKNOWN, and EVENT_RX_MGMT.

This cleans up lot of the driver wrapper code to be less dependent
on whether it is being used within wpa_supplicant AP mode or hostapd.
2009-12-13 23:05:39 +02:00
Jouni Malinen
fcf0f87d97 Replace hostapd_button_pushed() with generic driver event 2009-12-13 21:21:10 +02:00
Jouni Malinen
f2dab64ee3 Fix EVENT_FT_RRB_RX processing 2009-12-13 21:19:02 +02:00
Jouni Malinen
1cd973d501 Replace hostapd_michael_mic_failure() with generic driver event 2009-12-13 21:17:11 +02:00
Jouni Malinen
8043e72589 Add BSS ctx to if_add() driver op
This remove the need from driver_test.c to go through internal hostapd
structures to find the appropriate BSS when reporting events on secondary
BSSes.
2009-12-13 18:54:11 +02:00
Jouni Malinen
9b5d2b8b9c Merge hostapd/sta_flags.h into sta_info.h
The separate header file is not needed since none of the driver wrappers
include it anymore. Move the WLAN_STA_* definitions back to be together
with struct sta_info definition.
2009-12-13 11:41:46 +02:00
Jouni Malinen
0de39516ae Map STA flags into values defined in driver.h
This removes need for including hostapd/sta_flags.h into driver
wrappers and removes any remaining dependencies between driver flags
and internal hostapd flags.
2009-12-13 11:35:39 +02:00
Jouni Malinen
a34325dde9 Remove unneeded hostapd_wmm_sta_config()
The WMM STA flag is already taken care of by handle_assoc_cb() and there
is no point trying to do this unless hostapd is taking care MLME
processing, so no need to call this from drv_callbacks.c.
2009-12-13 11:14:21 +02:00
Jouni Malinen
60c8cfb4fb Remove usused flags parameter from sta_add() driver op 2009-12-13 11:05:22 +02:00
Jouni Malinen
af586419fd Add more WPA/IEEE 802.1X parameters into set_ieee8021x() driver op
This gets rid of the need to touch internal hostapd data structures
directly from the driver wrappers.
2009-12-12 23:50:29 +02:00
Jouni Malinen
e3bd3912ca Change set_ieee8021x driver op to use parameters structure
This makes it easier to extent the set of parameters passed to
this driver wrapper function.
2009-12-12 23:32:44 +02:00
Jouni Malinen
08fd8c15a0 Replace direct driver call to wpa_ft_rrb_rx() with driver event
This avoids need to include hostapd/wpa.h into the driver wrappers.
2009-12-12 22:43:26 +02:00
Jouni Malinen
50b5bf4eda Remove obsolete Prism54.org driver support (driver_prism54.c)
The Prism54.org project seems have been dead for a while and it does not
look like this driver would ever be maintained again. Furthermore, it is
difficult to find a version that would work with the driver_prism54.c
wrapper and there is another driver for these card in the Linux kernel
tree.

The hostapd integration in driver_prism54.c is quite different from the
other driver wrappers and would require major effort to get it cleaned
up. Since there does not seem to be any real users for the cleaned up
version, there does not seem to be justification to spend this effort on
the wrapper. This old code is making it much more difficult to clean up
the driver interface and at this point, the best option seems to be to
remove the driver wrappers. Should someone really still need this, the
old code will continue to be available in hostapd 0.6.x.
2009-12-12 20:52:12 +02:00
Jouni Malinen
0531006644 driver_wired: Move STA entry processing away from driver wrapper
Get rid of hostapd/sta_info.h dependency by introducing a new driver
callback function for hostapd.
2009-12-12 20:39:25 +02:00
Jouni Malinen
7e683ceeb4 WPS: Handle Selected Registrar as a union of info from all Registrars
Instead of using the latest selected registrar change, collect selected
registrar information separately from all registrars and use the union
of this information when building the WPS IE for Beacon and Probe
Response frames.

Note: SetSelectedRegistrar UPnP action does not include a unique
identifier, so the ER matching routine is based only on the IP address
of the ER. In theory, there could be multiple ERs using the same IP
address (but different port or URL), so there may be some corner cases
that would not always match the correct ER entry at the AP. Anyway, this
is not really expected to occur in normal use cases and even if it did
happen, the selected registrar information is not any worse than it was
before when only the last change from any registrar for being
advertized.
2009-12-12 16:54:59 +02:00
Jouni Malinen
5e9c730a2b WPS: Remove unnecessary GetDevice and PutMessage callbacks
These callbacks can be handled internally within core WPS code, so there
is no need to go through wps_hostapd.c with a callback function that is
just calling back into the core WPS code.
2009-12-12 16:47:39 +02:00
Jouni Malinen
d0d45d8276 WPS: Remove unnecessary SetSelectedRegistrar callback
This can be handled internally within core WPS code, so there is no
need to go through wps_hostapd.c with a callback function that is just
calling back into the core WPS code.
2009-12-12 16:46:33 +02:00
Jouni Malinen
50ceddcfd6 Fix dh_groups.o build for some configurations
Need to include dh_groups.o in the build even if not all DH groups
are included. Only internal crypto build case was doing this properly.
2009-12-11 17:24:42 +02:00
Jouni Malinen
616ea674c8 Fix hostapd build without RADIUS server 2009-12-11 16:29:28 +02:00
Jouni Malinen
9008a3e44d Merge get_seqnum_igtk() driver op with get_seqnum()
IEEE 802.11w uses distinct key indexes (4 and 5) so the same
get_seqnum() handler can be used to fetch packet number for both
TKIP/CCMP and BIP(using IGTK).

Since the new get_seqnum_igtk() handler was not actually implemented by
any driver wrapper, this may also fix BIP/IGTK sequence number reporting
with driver_nl80211.c.
2009-12-11 00:15:54 +02:00
Jouni Malinen
3484a18a13 hostapd: Remove unused bridge_packets configuration option
There was code for configuring this, but no driver wrapper actually
implements the actual setting. Remove this for now to reduce potential
confusion and to simply the driver interface.
2009-12-09 22:06:43 +02:00
Jouni Malinen
fb7842aa51 Remove struct hostapd_rate_data from driver API
In addition to the bitrate, the only other variable in this structure
is used internally in hostapd. Move this structure into hostapd.h and
make the driver API use simpler data structure (array of bitrates).
2009-12-09 21:57:50 +02:00
Jouni Malinen
22a7c9d735 Merge bss_add/bss_remove drivers ops into if_add/if_remove
if_add/if_remove can now be used as the generic driver ops for adding
and removing virtual interfaces of various types. In addition,
driver_nl80211.c is now including this code unconditionally, so that
the functions are not limited only for hostapd.
2009-12-09 16:49:28 +02:00
Jouni Malinen
b5996353e7 Remove unused if_update() driver op 2009-12-09 15:47:20 +02:00
Jouni Malinen
95272a888c Fix conditional EAP-SIM/AKA DB code selection 2009-12-06 19:48:25 +02:00
Jouni Malinen
d45354be53 Move IEEE 802.11n HT management code into a separate file 2009-12-06 19:41:47 +02:00
Jouni Malinen
eb53b752df Remove unnecessary CONFIG_IEEE80211N use 2009-12-06 19:17:54 +02:00
Jouni Malinen
644a8f2208 Remove unused phytype RX info variable 2009-12-06 18:54:58 +02:00
Jouni Malinen
22a7f39f23 Remove unused hostapd reconfig code 2009-12-06 18:48:30 +02:00
Jouni Malinen
5c90d47657 Move EAP-SIM DB conditional build into hostapd 2009-12-06 18:23:53 +02:00
Jouni Malinen
74784010af Remove conditional no-RADIUS build from src/radius
Make it responsibility of the src/radius user to handle conditional
build rules.
2009-12-06 17:53:59 +02:00
Jouni Malinen
0e574b07f8 Move hlr_auc_gw into hostapd directory
This is a separate program and is used mainly with hostapd, so it is
better to move this into the hostapd subdirectory now that Milenage
code has already been moved into src/crypto. Milenage was the only
generic component in hlr_auc_gw.
2009-12-06 16:33:19 +02:00
Jouni Malinen
1a70777868 Remove unneeded CONFIG_INTERNAL_X509 and NEED_SHA256 defines 2009-12-06 16:19:13 +02:00
Jouni Malinen
be473f3f09 Split crypto_internal.c into parts to clean up build
This makes it easier to make src/libcrypto.a and only link in
code that is really used.
2009-12-06 14:37:46 +02:00
Jouni Malinen
127608152e Move EAP method registration away from src/eap_{peer,server}
This makes it easier to make a library out of EAP methods without
losing possiblity of binary size optimization by linker dropping
unreferenced code.
2009-12-06 11:28:41 +02:00
Jouni Malinen
be916e0012 Remove Milenage test from hostapd/Makefile 2009-12-05 21:27:19 +02:00
Jouni Malinen
43df4cc2ca Move milenage.[ch] into src/crypto 2009-12-05 21:00:52 +02:00
Jouni Malinen
05df8cb3f6 Fix hostapd build with WPS disabled 2009-12-04 00:29:10 +02:00
Jouni Malinen
362bd35f2d Add more Doxygen documentation for RADIUS server implementation 2009-12-02 21:29:32 +02:00
Jouni Malinen
e0e14a7bc3 Move internal EAPOL authenticator defines into their own file
This is an initial step in further cleaning up the EAPOL authenticator
use to avoid requiring direct accesses to the internal data structures.
For now, number of external files are still including the internal
definitions from eapol_auth_sm_i.h, but eventually, these direct
references should be removed.
2009-11-29 23:16:04 +02:00
Jouni Malinen
03da66bd59 Remove src/crypto from default include path
In addition, start ordering header file includes to be in more
consistent order: system header files, src/utils, src/*, same
directory as the *.c file.
2009-11-29 23:04:43 +02:00
Jouni Malinen
5586f500a0 Split handle_assoc() into number of helper functions 2009-11-29 22:14:57 +02:00
Jouni Malinen
9294bfefc7 Mark IE input to hostapd_eid_wmm_valid() const 2009-11-29 22:10:38 +02:00
Jouni Malinen
2a3c6f5077 Check AID availability before handling HT state updates on association 2009-11-29 21:11:10 +02:00
Jouni Malinen
df84268ae7 Allocate sta->ht_capabilities dynamically
This avoids need for conditional inclusion of header file into
sta_info.h and cleans up the code a bit.
2009-11-29 21:07:52 +02:00
Jouni Malinen
b60d6f61e4 Make HOSTAPD_DUMP_STATE configurable with CONFIG_NO_DUMP_STATE
This removes the hardcoded definition from Makefile and cleans up
source code by moving the mail HOSTAPD_DUMP_STATE blocks into separate
files to avoid conditional compilation within files.
2009-11-29 20:18:47 +02:00
Jouni Malinen
281c950be4 Move EAPOL authenticator state machine into src/eapol_auth
This is now completely independent from hostapd-specific code, so
it can be moved to be under the src tree.
2009-11-29 20:03:28 +02:00
Jouni Malinen
a2befd37cc Change EAPOL authenticator hapd pointers to be opaque context
This cleans up the eapol_sm.c interface to not depend on any
hostapd-specific data structures.
2009-11-29 19:49:14 +02:00
Jouni Malinen
d79b779204 Remove dependency on sta_info.h from eapol_sm.c
Instead of fetching WPS IE from struct sta_info, pass this as a
parameter to eapol_auth_alloc().
2009-11-29 19:40:47 +02:00
Jouni Malinen
ee58e87195 Make eapol_auth_initialize() static since it is internal to eapol_sm.c 2009-11-29 19:32:40 +02:00
Jouni Malinen
382942004f Add EAPOL authenticator event callback
This avoids direct calls to WPA authenticator from eapol_sm.c.
2009-11-29 19:31:50 +02:00
Jouni Malinen
c02d52b405 Get PMKSA cache status as EAPOL alloc flag
No need to have a direct call from EAPOL authenticator to WPA
authenticator to figure this out for log output.
2009-11-29 19:21:56 +02:00
Jouni Malinen
5ed1c08fcd Initialize EAPOL authenticator flags during allocation
Store both preauthentication and WPA use status with EAPOL flags.
2009-11-29 19:12:45 +02:00
Jouni Malinen
fa04fa1005 Include common/eapol_common.h explicit and fix eapol_auth_logger enum 2009-11-29 19:03:47 +02:00
Jouni Malinen
2773ca093e Replace eap_type_text() with EAP server methods function
While this may not include knowledge of all EAP methods since this
depends on build configuration, it is better to not have to include
ieee802_1x.h into eapol_sm.c.
2009-11-29 18:57:15 +02:00
Jouni Malinen
4dbfe5c58a Conver hostapd specific files to include common.h
Instead of getting this via hostapd.h, include it as the first
non-system header file in all source code files in the same way as
used in all other files.
2009-11-29 18:46:42 +02:00
Jouni Malinen
0c3abf8d22 Add driver wrapper callback for WPS push button pressed
This avoids the need to include ../hostapd/wps_hostapd.h into the
driver wrappers.
2009-11-29 18:18:02 +02:00
Jouni Malinen
bcd154c343 Include sta_flags.h explicitly, not via sta_info.h 2009-11-29 18:00:39 +02:00
Jouni Malinen
90973fb2fd Remove src/common from default header file path
This makes it clearer which files are including header from src/common.
Some of these cases should probably be cleaned up in the future not to
do that.

In addition, src/common/nl80211_copy.h and wireless_copy.h were moved
into src/drivers since they are only used by driver wrappers and do not
need to live in src/common.
2009-11-29 17:51:55 +02:00
Jouni Malinen
fc4e2d9501 HT: Remove unneeded struct ht_cap_ie wrapper
It is simpler to just use the HT Capabilities IE payload structure
as-is.
2009-11-29 13:04:21 +02:00
Jouni Malinen
3a328c8133 Remove unused/unneeded IEEE 802.11n definitions 2009-11-29 12:43:23 +02:00
Jouni Malinen
be8eb8ab3e Fix AP mode HT Capabilities IE to use A-MPDU Parameters from the driver
Instead of using hardcoded maximum A-MPDU length of 64 kB and no
restrictions on minimum MPDU Start Spacing, use the correct values
reported by the driver.
2009-11-29 12:21:26 +02:00
Jouni Malinen
a49148fd55 Rename HT Capabilities IE fields to match with IEEE Std 802.11n-2009 2009-11-29 12:02:29 +02:00
Jouni Malinen
5843e1c9a6 Move acct_interim_interval away from RADIUS client configuration
This is not used at all inside RADIUS client and as such, it belongs
into hostapd configuration.
2009-11-28 23:03:20 +02:00
Jouni Malinen
41fa8a892f Remove old wpa_supplicant/hostapd doxygen files 2009-11-28 21:24:15 +02:00
Jouni Malinen
96750ea5e5 WPS: Clean up Primary Device Type handling
Use shared functions for converting Primary Device Type between binary
and string formats. In addition, use array of eight octets instead of a
specific structure with multiple fields to reduce code complexity.
2009-11-26 11:39:29 +02:00
Jouni Malinen
73d0ad78c8 Fix internal crypto build with some configurations
crypto_internal.c requires both aes-internal-enc.o and
aes-internal-dec.o, so make sure they get included in the build when
using internal crypto.
2009-11-24 10:24:54 +02:00
Jouni Malinen
4a867032ae Remove deprecated driver_ops handlers
This gets rid of previously deprecated driver_ops handlers set_wpa,
set_drop_unencrypted, set_auth_alg, set_mode. The same functionality
can be achieved by using the init/deinit/associate handlers.
2009-11-23 20:22:38 +02:00
Jouni Malinen
642187d6bf Merge set_key and hapd_set_key driver_ops into a single function 2009-11-23 16:58:32 +02:00
Jouni Malinen
fd7a5dd15f Move HOSTAPD_MTU definition into driver_hostap.c
This moves the MTU definition into driver_hostap.c since it was really
meant to be specific to this driver. Since this was the last remaining
definition in hostapd_defs.h, remove that header file as unnecessary.
2009-11-23 16:21:07 +02:00
Jouni Malinen
d994a9b54e Move definitions away from hostapd_defs.h
Clean up definitions to reduce need to include header files from the
hostapd directory into files under the src subdirectories.
2009-11-23 16:14:39 +02:00
Jouni Malinen
5d67487244 Merge set_beacon driver_ops into a single one
Clean up driver interface by merging hostapd and wpa_supplicant
specific set_beacon driver_ops into a single one. In addition,
merge set_beacon_int into to the same operation.
2009-11-23 15:26:05 +02:00
Jouni Malinen
224f7bda79 Preparations for v0.7.0 release 2009-11-21 22:49:02 +02:00
Jouni Malinen
56360b16dc Update ChangeLog files for 0.7.0 release 2009-11-21 21:53:51 +02:00
Felix Fietkau
9510f00ff8 hostapd: Fix endian bugs in STA HT capability handling 2009-11-16 13:58:08 +02:00
Felix Fietkau
c6313c7505 hostapd: Fix BSS channel checks in 40 MHz scan 2009-11-16 13:52:12 +02:00
Jouni Malinen
c94ec09ed3 WPS: Do not use ASCII-dump on binary PutWLANResponse NewMessage 2009-11-15 18:28:59 +02:00
Jouni Malinen
00785aba71 WPS: Remove unused WFA WLANConfig Service actions
This removes following WFA WLANConfig Service actions and the related
state variables: GetAPSettings, SetAPSettings, DelAPSettings,
GetSTASettings, SetSTASettings, DelSTASettings, RebootAP,
ResetAP, RebootSTA, ResetSTA.

While WFA WLANConfig Service version 1.0 claims that some of these are
mandatory to implement for an AP, there are no known implementations
supporting these actions neither in an AP/proxy or an External Registrar
that would use them. These are unlikely to be supported in the future
either and as such, it is just simpler to get rid of them to clean up
the implementation and reduce code size.
2009-11-14 14:08:58 +02:00
Andriy Tkachuk
355d36a7bf Disassociate STA if it associated with invalid/missing WPA/RSN IE
When using drivers that process management frames internally (e.g.,
madwifi, atheros, bsd), the driver may accept association with IEs
that do not match the security policy. Instead of silently leaving
the station associated, explicitly disassociate it to clear the
driver entry immediately.
2009-11-11 17:33:55 +02:00
Jouni Malinen
dd745de384 Fix use-after-free issue with pid_file in hostapd termination 2009-11-10 17:05:28 +02:00
Jouni Malinen
e542b40f93 WPS: Fix credential processing for open network case
There is no point in comparing cred->key == NULL since cred->key is
an array (never NULL). key_len == 0 should be used instead to indicate
that no key was specified.
2009-11-10 17:01:26 +02:00
Jouni Malinen
1d68e4c7d9 Fix hlr_auc_gw build (wpabuf.o is needed now for tls_openssh) 2009-11-10 16:53:47 +02:00
Jouni Malinen
b905c4a398 WPS: Add HTTP server module
Clean up code so that UPnP implementation does not need to include all
the HTTP functionality. In addition, make it easier to share HTTP server
functionality with other components in the future.
2009-11-08 17:26:55 +02:00
Jouni Malinen
0b40d03394 WPS: Move generic UPnP XML helper functionality into a separate file 2009-11-08 14:06:01 +02:00
Jouni Malinen
092794f480 WPS: Add HTTP client module to clean up code
Instead of implementing HTTP client functionality inside
wps_upnp_event.c, use a generic HTTP client module to do this. The HTTP
client code can now be shared more easily for other purposes, too.
2009-11-08 12:35:37 +02:00