Commit graph

14139 commits

Author SHA1 Message Date
Jouni Malinen
836f0ddac1 tests: EAP-PEAP/EAP-GTC
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 12:03:45 +02:00
Qun Zhang
31ee2992c7 Add QCA vendor subcmd/attribute to check wlan firmware state
Allow user space applications to check whether wlan firmware is alive
through an nl80211 vendor command.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
810dcfb667 tests: Wi-Fi generation indication for HT and VHT
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
3f8ceff54c Indicate wifi_generation in wpa_supplicant STATUS output
This adds a wifi_generation=4/5/6 line to the STATUS output if the
driver reports (Re)Association Request frame and (Re)Association
Response frame information elements in the association or connection
event. Only the generations 4 (HT = 802.11n), 5 (VHT = 802.11ac), and 6
(HE = 802.11ax) are reported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
ccaf774767 Add HE Capabilities into ieee802_11_parse_elems()
This is needed to determine whether an association negotiated use of HE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
5d68c0acd2 nl80211: (Re)Association Request frame IEs from association event
Process NL80211_ATTR_REQ_IE from the NL80211_CMD_ASSOCIATE event to
allow request IEs to be made available for the SME-in-wpa_supplicant
case similarly to how this is done with SME-in-driver with
NL80211_CMD_CONNECT.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
dd12e58e5f tests: ap_wpa_ie_parsing to allow EAPOL-Key msg 2/4 rejection
Once mac80211 starts reporting the used Association Request frame IEs in
the association event, wpa_supplicant will update RSN supplicant IE
information based on that and that will make the AP reject EAPOL-Key msg
2/4 in this particular test scenario due to the hack of including two
RSN IEs in the Association Request frame. Accept this sequence as a
valid test execution in addition to the previously expected connection
to avoid reporting incorrect failures.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-15 02:09:41 +02:00
Jouni Malinen
b4788908ca tests: AP VLAN based on PSK/passphrase
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
dbfa691df4 VLAN assignment based on used WPA/WPA2 passphrase/PSK
Extend wpa_psk_file to allow an optional VLAN ID to be specified with
"vlanid=<VLAN ID>" prefix on the line. If VLAN ID is specified and the
particular wpa_psk_file entry is used for a station, that station is
bound to the specified VLAN. This can be used to operate a single
WPA2-Personal BSS with multiple VLANs based on the used passphrase/PSK.
This is similar to the WPA2-Enterprise case where the RADIUS server can
assign stations to different VLANs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 13:36:54 +02:00
Jouni Malinen
dd2aedeb55 HS 2.0 server: Add X-WFA-Hotspot20-Filtering header line to T&C
When filtering is successfully disabled at the end of the terms and
conditions acceptance sequence, add the "X-WFA-Hotspot20-Filtering:
remove" header line to the HTTP response.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 12:09:09 +02:00
Jouni Malinen
051c8cae6a tests: DPP and two initiators
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-14 11:50:40 +02:00
Jouni Malinen
fe468b0714 HE: Fix set_he_cap() parsing of config options for MU EDCA Params
When I replaced the POS() function with ffs() when applying relevant
parts from the original patch, this ended up breaking the frame
construction since the POS() function was supposed to count the bit
offset for the mask with 0 being the LSB instead of 1 returned by ffs().
Furthermore, ffs() is not available in all C libraries (e.g., not
directly exposed by strings.h on Android), so better not depend on that
or compiler builtins for this since there is no need for this to be as
fast as possible in configuration parsing.

Fix this with a simple function to determine the number of bits the
value needs to be shifted left to align with the mask.

Fixes: 11ce7a1bc3 ("HE: Add MU EDCA Parameter Set element (AP)")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-12 01:23:30 +02:00
Jouni Malinen
6c02fa214b tests: AP not receiving Authentication frame ACK
Verify that the not-associated STA gets deauthenticated, not
disassociated, on inactivity timeout.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-11 17:42:59 +02:00
Jouni Malinen
f3a841bbff Do not disassociate not-associated STA on timeout
If the ap_handle_timer() timeout is reached for a not-associated STA, do
not default to disassociating that STA first since Disassociation frame
is not really appropriate to send to a STA that is not in associated
state. Instead, skip directly to deauthentication and STA entry removal.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-11 17:42:53 +02:00
Jouni Malinen
91205c8eb4 OpenSSL: Fix uninitialized variable in CRL reloading corner case
The flags variable needs to be initialized to 0 if check_crl is 0 in
the updated configuration.

Fixes: 159a7fbdea ("crl_reload_interval: Add CRL reloading support")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 14:02:17 +02:00
Jouni Malinen
092a19222b Use for_each_element() in ieee802_11_parse_elems()
Use the new iteration macro to simplify the impelmentation and make it
more consistent with other IE parsers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 13:51:11 +02:00
Johannes Berg
b50a638965 common: Use for_each_element_id/_extid for get_ie/get_ie_ext/get_vendor_ie
Simplifications based on the new iteration macros.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
b644797429 common: Use for_each_element_id() in mb_ies_info_by_ies()
The change is bigger because here we need to catch the error
condition if the last element doesn't fit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
9008048f0f common: Use for_each_element_id() in ieee802_11_vendor_ie_concat()
Simple cleanup using the new iteration helper macro.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
eb84238df6 common: Use for_each_element() in ieee802_11_ie_count()
Simple cleanup using the new macros.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Johannes Berg
0e0c31bdc5 common: Add strongly typed element iteration macros
Rather than always iterating elements from frames with pure
u8 pointers, add a type "struct element" that encapsulates
the id/datalen/data format of them.

Then, add the element iteration macros
 * for_each_element
 * for_each_element_id
 * for_each_element_extid

which take, as their first 'argument', such a structure and
iterate through a given u8 array interpreting it as elements.

While at it also add
 * for_each_subelement
 * for_each_subelement_id
 * for_each_subelement_extid

which instead of taking data/length just take an outer element
and use its data/datalen.

Also add for_each_element_completed() to determine if any of
the loops above completed, i.e., it was able to parse all of
the elements successfully and no data remained.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 13:37:22 +02:00
Masashi Honma
51c83edfca tests: Catch only specific exceptions
This allows unexpected cases to terminate parallel-vm.py without being
hidden by the exception handler.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-11 12:42:52 +02:00
Jouni Malinen
b623634262 tests: Document some of the test tools
This will hopefully make it easier for others to use these test tools.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
a4a9737d6b tests: Fix wnm-fuzzer by adding dummy configuration
Some of the WNM implementation expects configuration to be available
(e.g., ieee802_!1_rx_wnm_coloc_intf_req() dereferences wpa_s->conf), so
add a dummy configuration to allow the fuzzer tool to be used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
525923b1d7 tests: EAPOL-Key fuzzing tool
Add test-eapol program that can be used for fuzzing the EAPOL-Key
Supplicant and Authenticator implementations. This tool can write
Supplicant or Authenticator messages into a file as an initialization
step and for the fuzzing step, that file (with potential modifications)
can be used to replace the internally generated message contents.

The TEST_FUZZ=y build parameter is used to make a special build where a
hardcoded random number generator and hardcoded timestamp are used to
force deterministic behavior for the EAPOL-Key operations. This will
also make the implementation ignore Key MIC and AES keywrap errors to
allow processing of modified messages to continue further.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
02a0a23939 RSN: Do not start preauthentication timer without candidates
There is no need to schedule the postponed RSN preauthentication start
if there are no candidates. Avoid wasting eloop resources for this.

This is most useful for fuzz testing of the 4-way handshake
implementation to avoid getting stuck waiting for this unnecessary one
second time when using eloop to coordinate the Authenticator and
Supplicant state machines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
85611e967e eap_example: Update expired certificates
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
1e5506588d JSON: Fix string parsing when \\ escape is at the end of buffer
This would have resulted in reading one octet past the end of the buffer
before rejecting the string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
0dedcb3154 JSON: Fix parsing of a number from the end of the buffer
Avoid reading one octet past the end of the buffer when parsing a number
that is at the very end of the buffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
79fa1b4530 tests: JSON parser fuzzer
test-json can be used for fuzz testing the JSON parser implementation in
src/utils/json.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
62269c8d8d TLS: Fix X.509 certificate name conversion into empty string
If none of the supported name attributes are present, the name string
was nul terminated only at the end. Add an explicit nul termination at
the end of the last written (or beginning of the buffer, if nothing is
written) to avoid writing uninitialized data to debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
3eae9766b7 TLS: Fix ASN.1 parsing with no room for the header
Explicitly check the remaining buffer length before trying to read the
ASN.1 header values. Attempt to parse an ASN.1 header when there was not
enough buffer room for it would have started by reading one or two
octets beyond the end of the buffer before reporting invalid data at the
following explicit check for buffer room.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
fbc2123a14 TLS: Fix AlertDescription for missing partial processing case
tlsv1_record_receive() did not return error here and as such, &alert was
not set and must not be used. Report internal error instead to avoid use
of uninitialized memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
1ac9c020b5 tests: TLS fuzzing tool
Add test-tls program that can be used for fuzzing the internal TLS
client and server implementations. This tool can write client or server
messages into a file as an initialization step and for the fuzzing step,
that file (with potential modifications) can be used to replace the
internally generated message contents.

The TEST_FUZZ=y build parameter is used to make a special build where a
hardcoded random number generator and hardcoded timestamp are used to
force deterministic behavior for the TLS operations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-11 02:35:29 +02:00
Jouni Malinen
b49ec25979 tests: Add a simple HTTPS server for TLS testing
This makes it easier to use TLS testing tools against the internal TLS
implementation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:55:39 +02:00
Jouni Malinen
f3cca8b1ea TLS server: Check credentials have been configured before using them
Allow ServerHello to be built without local credential configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
19dd7a736e TLS server: Local failure information on verify_data mismatch
Mark connection state FAILED in this case even though TLS Alert is not
sent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
f08ab18bf9 TLS server: Add internal callbacks get_failed, get_*_alerts
These can be used to implement cleaner termination of the handshake in
case of failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
b642ab4062 TLS server: More complete logging of ClientHello decode errors
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
fdd8a2f0b8 TLS client: Fix peer certificate event checking for probing
conn->cred might be NULL here, so check for that explicitly before
checking whether conn->cred->cert_probe is set. This fixes a potential
NULL pointer dereference when going through peer certificates with
event_cb functionality enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
e5bffe1aa9 OpenSSL: Add more handshake message names to debug
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Masashi Honma
45d3e2edbd tests: Explicitly flush stdin for python3
Without this flush(), test does not run.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-10 01:43:50 +02:00
Masashi Honma
3069be8fe3 tests: Encode VM input for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-10 01:43:50 +02:00
Masashi Honma
689a956049 tests: Decode VM output for python3
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-10 01:43:50 +02:00
Masashi Honma
0da6d93dbf tests: Change handling of reading non blocked empty stream for python3
The result of reading non blocked empty stream is different between
python2 and 3. The python2 sends "[Errno 11] Resource temporarily
unavailable" exception. The python3 could read "None" without
exception, so handle this "None" case as well.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2019-02-10 01:43:50 +02:00
Jouni Malinen
6447b87400 tests: EAP-TLS and TLS 1.3
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
21cd8f8319 nl80211: Use wpa_ssid_txt() for debug messages more consistently
Print the SSID with printf escaping instead of wpa_hexdump_ascii()
format to clean up the debug log a bit. This was already done for number
of SSID debug prints.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Jouni Malinen
bbdb501460 Note HT overrides in debug log only if set
This makes the debug log cleaner by removing the mostly confusing prints
about HT override parameters if they are not actually used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-02-10 01:43:50 +02:00
Purushottam Kushwaha
f2a6ac63ee P2P: Update find_start timer only when p2p_scan is started.
p2p->find_start timer was updated on each p2p_find call irrespective of
p2p_find being successful/failed/rejected. For cases where p2p_find was
in progress/pending, another call to p2p_find would be rejected but
p2p->find_start timer would still be updated.

p2p->find_start is maintained in wpa_supplicant to reject the kernel
scan entries before the p2p->find_start time. In above scenario, some of
the scan entries could be discarded even if the Probe Respons frame(s)
were received during the last scan/p2p_find.

This commit changes this to update the p2p->find_start timer only when
call to p2p_find is successful, i.e., a new scan is actually started.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-02-07 11:56:35 +02:00
Johannes Berg
3281c1590d tests: hwsim: macsec: correct configuration reference
You need CONFIG_DRIVER_MACSEC_LINUX, not CONFIG_MACSEC_LINUX,
so fix this in the messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-06 23:04:54 +02:00