Commit graph

4829 commits

Author SHA1 Message Date
Jouni Malinen
803edd1c09 tests: Fix BSS table flushing and old result ignoring for WPS tests
The WPS tests are more prone to fail if scan results from the previous
test cases are allowed to remain in the wpa_supplicant BSS table during
the consecutive test since the test setup uses the same BSSID for the
test APs that change their configuration. Avoid these mostly bogus
issues by enforcing wpa_supplicant to drop and ignore old scan results
during the WPS test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
4342326fc7 Add ignore_old_scan_res configuration parameter
This can be used to configure wpa_supplicant to ignore old scan results
from the driver cache in cases where such results were not updated after
the scan trigger from wpa_supplicant. This can be useful in some cases
where the driver may cache information for a significant time and the AP
configuration is changing. Many such cases are for testing scripts, but
this could potentially be useful for some WPS use cases, too.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
9599ccc2dd WPS: Clear after_wps on new WPS connection
The after_wps counter could have potentially be left in its old non-zero
value in some WPS sequences which could result in a single-channel scan
being used based on obsolete information. Clear after_wps in
wpas_wps_reassoc() to make sure this does not happen.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
702621e6dd WPS: Use latest updated BSS entry if multiple BSSID matches found
If the AP (P2P GO) has changes its channel of SSID recently, the BSS
table may have multiple entries for a BSSID. Select the one which was
most recently updated for WPS/P2P operations in such case to increase
the likelihood of using current information.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
347c77e6cc tests: Remove obsolete test script
The generic test cases and run-tests.py have removed need of this
separate test script.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
7585f349c7 tests: Add command line argument -f for specifying a test file
This can be used to run all test cases from a single test file.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:42 +03:00
Jouni Malinen
63a020ead8 tests: Use a single set of scripts for running both P2P and AP tests
This removes the unnecessary separation of P2P (no hostapd) and AP
tests. The same scripts can be used to prepare for these tests and to
execute the tests.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
0b20f514de tests: Make hostapd test setup more similar to the P2P tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
ae3ad3284a tests: Pass AP devices to test cases
This removes hardcoded assumptions about AP interfaces from test_*.py.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 18:05:31 +03:00
Jouni Malinen
302b7a1b09 tests: Add test cases for WPS operations
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:46:05 +03:00
Jouni Malinen
ab547b5857 WPS: Add more helpful debug for invalid WPS_REG command parsing
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:34:35 +03:00
Jouni Malinen
a679c0f284 WPS: Allow hostapd process to control independent WPS interfaces
The new wps_independent=1 configuration parameter can be used to remove
interfaces from the shared hostapd process WPS control (i.e., to apply
WPS operations only to a subset of interfaces instead of all).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:34:35 +03:00
Jouni Malinen
ccdff94035 WPS AP: Add support for reconfiguration with in-memory config
This allows WPS to update AP configuration in the case no hostapd
configuration file is used (i.e., dynamic configuration through the
control interface).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-31 12:34:35 +03:00
Johannes Berg
8970bae806 nl80211: Use nla_nest_start/end instead of nla_put_nested
Instead of allocating a new message and then moving that into
the message being built, use nla_nest_start() and put the data
into the message directly.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-30 20:37:44 +02:00
Jouni Malinen
fde43cddb9 tests: Fix test_discovery to force full device discovery
P2P_PROV_DISC fails if the peer is not fully discovered and the previous
version of the test cases did not force this (i.e., it could have
started PD just based on having seen a Probe Request frame from the
peer).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:31:22 +02:00
Jouni Malinen
5924d4c105 P2P: Add a test case for discovering a P2P client in a group
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 20:17:11 +02:00
Chaitanya TK
558d69e3ba P2P: Omit P2P Group Info in case of no connected peers
As per P2P specification v1.2: "The P2P Group Info attribute shall be
omitted if there are zero connected P2P Clients."

Do not add the attribute if there are not connected peers.

Signed-hostap: Chaitanya T K <chaitanya.mgit@gmail.com>
2013-03-30 20:08:42 +02:00
Michael Braun
65a32cdbcb AP: Fix infinite loop in WPA state machine when out of random bytes
When the OS is out of random bytes in SM_STATE(WPA_PTK, AUTHENTICATION2)
in ap/wpa_auth.c, hostapd sends the sm to state DISCONNECT without
clearing ReAuthenticationRequest, resulting in an infinite loop.
Clearing sm->ReAuthenticationRequest using gdb fixes the running hostapd
instance for me. Also sm->Disconnect = TRUE should be used instead of
wpa_sta_disconnect() to make sure that the incomplete ANonce does not
get used.

Fix this issue by resetting sm->ReAuthenticationRequest even if the STA
gets disconnected and use sm->Disconnect instead of
wpa_sta_disconnect().

Signed-hostap: Michael Braun <michael-dev@fami-braun.de>
2013-03-30 19:53:22 +02:00
Jouni Malinen
a5f61b2b87 Fix OLBC non-HT AP detection to check channel
A non-HT capable AP on any channel could have triggered us to enable
protection regardless of own operating channel if the driver delivered
Beacon frames from other channels. The channel detection in ap_list is
not exactly ideal, but most cases can be handled by checking ap->channel
against the currently configured channel (or secondary channel in case
of HT40).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 18:05:18 +02:00
Jouni Malinen
69554d78f6 ap_list: Remove unused functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 17:06:50 +02:00
Jouni Malinen
08c99cafd2 ap_list: Remove unused iteration list pointers
This iter_next/iter_prev pointers were not really used for anything, so
get rid of the unnecessary complexity in the AP list maintenance.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 17:06:27 +02:00
Jouni Malinen
6b16917f39 ap_list: Remove unused fields
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:58:58 +02:00
Jouni Malinen
66f1f751d2 P2P: Fix provision discovery response handling in some cases
Commit 6b56cc2d97 added a possible call to
p2p_reset_pending_pd() prior to checking config_methods match between
our request and peer response. That reset call could clear
dev->req_config_methods and as such, result in unexpected
P2P-PROV-DISC-FAILURE report here even in cases where the peer accepts
the provision discovery. Fix this by using a local copy of the
req_config_methods variable.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:10:43 +02:00
Jouni Malinen
b12b7c7a1f tests: Make test_discovery report PD failures with more detail
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 16:10:04 +02:00
Jouni Malinen
5b06bdf795 tests: Add SA Query test with PMF
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 15:31:50 +02:00
Jouni Malinen
835a546b20 tests: Add test cases for PMF
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 13:47:22 +02:00
Jouni Malinen
2f9b66d3ab Extend ROAM command to handle multiple SSIDs per BSS
Select the BSS entry based on BSSID,SSID pairs instead of just BSSID to
avoid selecting an unexpected SSID for the ROAM command.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:49:05 +02:00
Jouni Malinen
5126138c9e tests: Add roaming test cases
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:28:39 +02:00
Jouni Malinen
fcbccf1aae tests: Set umask to avoid unexpected issues with hostapd sockets
buildbot seems to be running with more limited umask by default and that
prevented the hostapd per-interface socket from being accessed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 11:11:55 +02:00
Jouni Malinen
8bc0799b93 tests: Use the ap_ifname variable instead of hardcoding ifname
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-30 10:31:18 +02:00
Jouni Malinen
ce26864e79 wlantest: Get rid of compiler warning
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:24:10 +02:00
Jouni Malinen
894541ea9c tests: Get rid of the unnecessary add_tests() functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 21:03:55 +02:00
Jouni Malinen
b61e418c35 tests: Add helper functions for connection to an AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:41:57 +02:00
Jouni Malinen
e259d186cf tests: Add helper functions for starting hostapd AP
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 20:33:25 +02:00
Jouni Malinen
0165c4be10 tests: Add TDLS test cases for WEP and open network
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:15:43 +02:00
Jouni Malinen
8cb9bc19fb wlantest: Add wlantest_cli command add_wep
This can be used to configure a known WEP key for decrypting WEP frames.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 19:12:35 +02:00
Jouni Malinen
e492837b67 tests: Add TDLS test cases with WPA-PSK and WPA+WPA2-PSK
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:51:48 +02:00
Jouni Malinen
b8cd4c542f tests: Configure hostapd dynamically during the tests
This makes it more convenient to change hostapd parameters between the
test cases.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 18:37:03 +02:00
Jouni Malinen
9f46d57f2b tests: Rename AP testing scripts to be more generic
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 17:19:47 +02:00
Jouni Malinen
187f87f04c hostapd: Allow ctrl_iface group to be specified on command line
The new -G<group> command line argument can now be used to set the group
for the control interfaces to enable cases where hostapd is used without
a configuration file and the controlling program is not running with
root user privileges.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 17:09:31 +02:00
Jouni Malinen
d19d2830b6 gitignore additional build files
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-29 13:15:27 +02:00
Sunil Dutt
9f890c982a TDLS: Support both external and internal setup in disabling link
Enhance TDLS Setup Request processing to support both external and
internal TDLS setup for the case where concurrent TDLS initialization
results in the TDLS Setup Request from the peer getting accepted.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-28 15:05:10 +02:00
Jouni Malinen
864fe3a47c TDLS: Fix TDLS Setup Request processing in existing-peer cases
wpa_tdls_peer_free() ended up getting called after some of the
parameters from the TDLS Setup Request frame were copied into the struct
wpa_tdls_peer information. This could result in continuing with cleared
information in case the new exchange was the one that is used in
concurrent initialization case or if this is to re-negotiated an
existing TDLS link. The driver would not be provided with all the peer
capabilities correctly in such case.

Fix this by moving the existing_peer check to happen before the
information from the TDLS Setup Request frame is copied.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-28 12:38:24 +02:00
Jouni Malinen
a9bdfd49a6 tests: Add more test cases for TDLS functionality
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 16:40:49 +02:00
Jouni Malinen
dc4e222cb7 tests: Use more thorough validation of TDLS frame paths
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 16:05:52 +02:00
Jouni Malinen
059555878e tests: Add forgotten new files to the repository
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 14:40:49 +02:00
Jouni Malinen
1d43e28a59 TDLS: Fix TPK M2 processing in concurrent initiation case
If we accept the peer TPK M1 after having sent our TPK M1, we need to
reject TPK M2 from the peer to avoid going through two TDLS setup
exchanges.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-27 14:29:01 +02:00
Jouni Malinen
81266da728 tests: Add initial AP tests with hostapd
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 14:29:01 +02:00
Jouni Malinen
d014a15046 tests: Fix TDLS counter validation
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-27 13:32:36 +02:00
Jouni Malinen
ef8151ac57 P2P: Write p2p_ignore_shared_freq to configuration file on updates
Commit b277a2bebc added a new global
configuration parameter, but forgot to update configuration file saving
to store this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-26 22:24:41 +02:00