Commit graph

1489 commits

Author SHA1 Message Date
Sunil Dutt
62cd9d7926 nl80211: Specify the BSSID in the QCA vendor scan
This allows the vendor scan to be optimized when a response is needed
only from a single, known BSS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-11 21:36:16 +02:00
Ningyuan Wang
ed0a4ddc22 nl80211: Update drv->ssid on connect/associate event based on BSS data
On a connect nl80211 event, wpa_supplicant uses
wpa_driver_nl80211_get_ssid() to fetch the current associated SSID to
compare to existing configurations. However,
wpa_driver_nl80211_get_ssid() uses drv->ssid, which is a cached value.
It is set when we explicitly initial a connect request using
wpa_supplicant. If the association was initiated outside of
wpa_supplicant, we need another way to populate drv->ssid. This commit
sets drv->ssid based on cfg80211 BSS information on connect/associate
nl80211 events.

Signed-off-by: Ningyuan Wang <nywang@google.com>
2016-12-05 12:08:46 +02:00
Jouni Malinen
9f346fadc8 nl80211: Fix scan_state update in no pending scan state
Commit adcd7c4b0b ('nl80211: Support
vendor scan together with normal scan') made the drv->scan_state updates
for NL80211_CMD_NEW_SCAN_RESULTS and NL80211_CMD_SCAN_ABORTED
conditional on drv->last_scan_cmd being NL80211_CMD_TRIGGER_SCAN. This
missed the part about the possibility of last_scan_cmd == 0 and an
externally started cfg80211 scan is ending. This could leave
drv->scan_state into SCAN_STARTED state even after the scan was
completed. Consequently, hwsim test cases could get stuck in reset()
handler waiting for scan to terminate.

Fix this by updating drv->scan_state also in drv->last_scan_cmd == 0
case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-05 11:48:26 +02:00
Michael Braun
34f7c699a6 Add multicast to unicast support
This adds support for nl80211 NL80211_CMD_SET_MULTICAST_TO_UNICAST
command.

By setting the new hostapd configuration option multicast_to_unicast=1,
hostapd configures this AP to perform multicast to unicast conversion.

When enabled, all multicast packets with ethertype ARP, IPv4, or IPv6
(possibly within an 802.1Q header) will be sent out to each station once
with the destination (multicast) MAC address replaced by the station's
MAC address. Note that this may break certain expectations of the
receiver, e.g., the ability to drop unicast IP packets encapsulated in
multicast L2 frames, or the ability to not send destination unreachable
messages in such cases.

This also does not implement Directed Multicast Service (DMS).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:00:06 +02:00
Jouni Malinen
5f2c0a22a9 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-12-02.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-04 20:50:07 +02:00
Jouni Malinen
a1fce3911f nl80211: Optimize memory use in nl80211_get_assoc_freq()
Do not use the generic bss_info_handler() design to fetch all scan
results into temporary memory buffer. Instead, use a separate BSS info
handler that fetches the requested information without fully parsing the
BSS entries and without allocating any memory for collecting all the
results.

This is also simplifying bss_info_handler() and nl80211_parse_bss_info()
design by getting rid of the special case that was used only for
nl80211_get_assoc_freq() and not normal scan result fetching.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 22:37:41 +02:00
Jouni Malinen
da2c284169 nl80211: Reduce nl80211_dump_scan() memory need
Instead of fetching all scan results to a temporary buffer, debug print
scan result dump directly from the message handler function one BSS at a
time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 22:14:04 +02:00
Jouni Malinen
b72a01bc5a nl80211: Split bss_info_handler() into a separate parser function
This allows a single scan result to be parsed at a time. This is a step
towards optimizing scan result fetching without having to allocate
memory for all entries at the same time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 19:36:24 +02:00
Jouni Malinen
cfadab269f nl80211: Move duplicate scan result removal to bss.c
The way the removal of duplicated (one per frequency) BSS entries in the
cfg80211 scan results were removed in driver_nl80211_scan.c
bss_info_handler() depended on having the full scan results available to
allow iteration through the other entries. This is problematic for the
goal of being able to optimize memory allocations for scan result
fetching in a manner that would not build the full result buffer in
memory.

Move this duplicate removal into bss.c since it has sufficient
information available for doing the same determination of which one of
two BSS entries is more current.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 19:26:47 +02:00
Jouni Malinen
2a1cf26ecf nl80211: Add more debug details to duplicate scan entry removal
This makes it easier to understand which cfg80211 entry got removed as
obsolete duplicate.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:59:32 +02:00
Jouni Malinen
865081c307 privsep: Support frequency list for scan requests
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:27:16 +02:00
Jouni Malinen
da818ee5e9 privsep: Support multiple scan SSIDs
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:17:28 +02:00
Jouni Malinen
d3c43e5855 privsep: Fix scan result fetching with Beacon frame IEs
wpa_priv did not yet support Beacon frame IEs (res->beacon_ie_len) which
resulted in invalid scan data being accepted in driver_privsep.c. Add
support for res->beacon_ie_len and also fix the validation step to take
this new variable length field into account.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-03 18:02:49 +02:00
Jouni Malinen
c8fef7869d nl80211: Split nl80211_check_bss_status() into a separate function
This allows a single scan result to be checked at a time. This is a step
towards optimizing scan result fetching without having to allocate
memory for all entries at the same time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-02 20:54:49 +02:00
Jouni Malinen
e35e137298 nl80211: Separate channel noise fetch from scan result processing
This untangles the NL80211_CMD_GET_SURVEY handler loop from
NL80211_CMD_GET_SCAN processing so that the per-channel noise
information can be fetched with a common function to a local data
structure that can then be easily used to update individual scan results
(a single BSS) instead of having to go through a full set of scan
results. This is a step towards optimizing scan result fetching without
having to allocate memory for all entries at the same time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-12-02 20:48:43 +02:00
Jouni Malinen
8c0ed37b64 wired: Mark some common helper functions static
These are used only within driver_wired_common.c now at the end of the
refactoring changes, so there is no need to make these helper functions
available outside driver_wired_common.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-11-30 20:08:39 +02:00
Sabrina Dubroca
f014d9dbf0 macsec_linux: Add a driver for macsec on Linux kernels
This uses libnl3 to communicate with the macsec module available on
Linux. A recent enough version of libnl is needed for the macsec.h file
(which is not yet available in a formal libnl release at the time of
this commit).

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 20:08:36 +02:00
Sabrina Dubroca
8618313b6e drivers: Move driver_wired_get_ssid() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
d27c42baea drivers: Move driver_wired_get_bssid() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
9281e5c5ce drivers: Move driver_wired_get_capa() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
ec9cfb96c2 drivers: Move driver_wired_deinit_common() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
ed5ae61193 drivers: Move driver_wired_init_common() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
5a55ec38ed drivers: Move driver_wired_get_ifstatus() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
d718a5d975 drivers: Move driver_wired_set_ifflags() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
567b7d4ec2 drivers: Move driver_wired_get_ifflags() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
693124a1e4 drivers: Move driver_wired_multi() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
b0906ef770 drivers: Move wired_multicast_membership() to a common file
This continues refactoring of the common parts of wired drivers code
into a shared file, so that they can be reused by other drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sabrina Dubroca
0abc8d10cc drivers: Move common definitions for wired drivers out
Refactor the common parts of wired drivers code into a shared file, so
that they can be reused by other drivers. The macsec_qca driver already
contains a lot of code duplication from the wired driver, and the
macsec_linux driver would do the same. A structure to hold data common
to all wired drivers is added and used in all these drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 19:33:43 +02:00
Sunil Dutt
eeb34a432e nl80211: Enhance abort scan to also abort the vendor scan
This commit enhances the abort scan implementation to also abort the
vendor scan, if one was used to trigger the scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-30 19:33:39 +02:00
Purushottam Kushwaha
d4f3003c56 nl80211: Configure Beacon frame TX rate if driver advertises support
If the driver advertises support for setting Beacon frame data rate,
allow the user to configure this rate as part of starting the AP. Only
one Beacon frame TX rate is allowed.

Drivers advertising such support should set corresponding flag via the
NL80211_ATTR_EXT_FEATURES attribute.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-26 00:36:27 +02:00
Purushottam Kushwaha
29483a5678 Add support for user configurable Beacon frame data rate for AP mode
Allow configuration of Beacon frame TX rate from hostapd.conf with
"beacon_rate=xx" option. The following format is used to set
legacy/HT/VHT beacon rates:

Legacy (CCK/OFDM rates):
	beacon_rate=<legacy rate in 100 kbps>
HT:
	beacon_rate=ht:<HT MCS>
VHT:
	beacon_rate=vht:<VHT MCS>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 23:12:30 +02:00
Sabrina Dubroca
1d3d0666a6 mka: Add enable_encrypt op and call it from CP state machine
This allows MKA to turn encryption on/off down to the driver.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-20 00:35:23 +02:00
Joel Cunningham
7824bf77d6 nl80211: Fix get_inact_sec() returning -1 on failure
This commit fixes the nl80211 driver call get_inact_sec() to return -1
when STA inactivity time retrieval fails in i802_read_sta_data().

This was intended to be handled by initalizing the inactive_msec member
to -1 but i802_read_sta_data() assumes the data parameter is
uninitialized and memsets the entire structure, neutralizing the attempt
to distinguish between no value (-1) and a time value of 0.

This is fixed by now requiring i802_read_sta_data() callers to
initialize the data structure first (allowing get_inact_sec() to use
-1). This is a safe change because it does not change any driver API
behavior and only affects one other static function in driver_nl80211.c

Signed-off-by: Joel Cunningham <joel.cunningham@me.com>
2016-11-19 17:39:23 +02:00
Sabrina Dubroca
23c3528a84 mka: Add support for removing SAs
So that the core can notify drivers that need to perform some operations
when an SA is deleted.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:35:38 +03:00
Sabrina Dubroca
6f551abdfc mka: Remove "channel" hacks from the stack and the macsec_qca driver
This is specific to the macsec_qca driver. The core implementation
shouldn't care about this, and only deal with the complete secure
channel, and pass this down to the driver.

Drivers that have such limitations should take care of these in their
->create functions and throw an error.

Since the core MKA no longer saves the channel number, the macsec_qca
driver must be able to recover it. Add a map (which is just an array
since it's quite short) to match SCIs to channel numbers, and lookup
functions that will be called in every place where functions would get
the channel from the core code. Getting an available channel should be
part of channel creation, instead of being a preparation step.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:24:08 +03:00
Peng Xu
c2ad5b9218 nl80211: Update channel information after channel switch notification
When channel switch happens, driver wrapper's internal channel
information needs to be updated so that the new frequency will be used
in operations using drv->assoc_freq. Previously, only bss->freq was
updated and the new frequency was also indicated in the EVENT_CH_SWITCH
event. This could potentially leave out couple of cases that use
drv->assoc_freq at least as a fallback mechanism for getting the current
operating frequency.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-28 23:58:23 +03:00
Maneesh Jain
641c73f84f driver.h: Fix a typo in a comment
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:01:50 +03:00
Sunil Dutt
2e4e4fb71c nl80211: Allow TDLS trigger modes to be configured to the host driver
This commit adds a control interface command to configure the TDLS
trigger mode to the host driver. This TDLS mode is configured through
the "SET tdls_trigger_control" control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:22:33 +03:00
Jouni Malinen
befdb2dc8d nl80211: Check driver FILS capability
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 16:06:06 +03:00
Jouni Malinen
40a4572738 nl80211: FILS KEK and nonces for NL80211_CMD_ASSOCIATE
This sends the FILS KEK and AAD context (nonces) to the driver with the
NL80211_CMD_ASSOCIATE messages when using FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
d8f9342d03 nl80211: Add support for setting FILS authentication algorithm
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 15:02:08 +03:00
Jouni Malinen
e76e950eac Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-10-27.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-10-27 15:02:08 +03:00
Jouni Malinen
061dac1d3c FILS: Claim FILS capability only if driver supports it
"GET_CAPABILITY fils" used to return "FILS" based on wpa_supplicant
configuration. This can be made more useful by checking both for
wpa_supplicant and driver support for FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
ac56c39532 driver: Add option to pass FILS KEK/AAD to the driver for association
This allows the FILS KEK and AAD data (nonces) to be configured to the
driver for association so that the driver can encrypt the
(Re)Association Request frame and decrypt the (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-24 23:07:56 +03:00
Jouni Malinen
5b092fb63f nl80211: Make full (Re)Association Response frame available
This is needed for FILS processing since AAD includes data before the
first element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:12:11 +03:00
Jouni Malinen
ce16c489d8 Rename sae_data to more generic auth_data
This makes it cleaner for the FILS implementation to use the same design
for setting Authentication frame elements as was already done with SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Sabrina Dubroca
a25e4efc9e mka: Add driver op to get macsec capabilities
This also implements the macsec_get_capability for the macsec_qca
driver to maintain the existing behavior.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-09 11:30:48 +03:00
Sabrina Dubroca
5f5ca28414 mka: Pass full structures down to macsec drivers' receive SC ops
Clean up the driver interface by passing pointers to struct receive_sc
down the stack to the {create,delete}_recevie_sc() ops, instead of
passing the individual properties of the SC.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-08 00:45:19 +03:00
Sabrina Dubroca
8ebfc7c2ba mka: Pass full structures down to macsec drivers' transmit SC ops
Clean up the driver interface by passing pointers to struct transmit_sc
down the stack to the {create,delete}_transmit_sc() ops, instead of
passing the individual arguments.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-08 00:45:03 +03:00
Sabrina Dubroca
cecdecdbe8 mka: Pass full structures down to macsec drivers' receive SA ops
Clean up the driver interface by passing pointers to struct receive_sa
down the stack to the {create,enable,disable}_receive_sa() ops, instead
of passing the individual properties of the SA.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-03 13:26:26 +03:00