Commit graph

4623 commits

Author SHA1 Message Date
Jouni Malinen
62cab3b737 eap_proxy: Add a dummy implementation for compilation testing
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:05 +02:00
Deepthi Gowri
bd3ca9d0bf Android: Enable EAP-AKA support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:03 +02:00
Deepthi Gowri
45f4a97a3a eap_proxy: Add mechanism for allowing EAP methods to be offloaded
In addition to the offload mechanism, the Android configuration and
makefiles are extended to allow this to be configured for the build by
dropping in platform specific configuration files and makefile without
having to modify any existing files.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:54:01 +02:00
Deepthi Gowri
83e7aedf72 Android: Allow setgroups to be overridden from build configuration
ANDROID_SETGROUPS_OVERRIDE macro can now be used to override setgroups()
values based on build configuration.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:53:58 +02:00
Deepthi Gowri
c002f6405f P2P: Send p2p_stop_find event on failure to start pending p2p_find
When pending p2p_find fails we need to send p2p_stop_find event to
indicate the previous p2p_find command has been processed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 11:37:07 +02:00
Jouni Malinen
78441a48af P2P: Fix GO Probe Response IEs when Wi-Fi Display is enabled
Commit 1a9f6509b3 added support for
fragmenting the P2P IE in Probe Response frames from a GO. However, it
did not take into account the possibility of Wi-Fi Display IE being
included in the same buffer and caused a regression for the cases where
Wi-Fi Display is enabled. Fix this by building the possibly fragmented
P2P IE first and then concatenating the separate IEs together.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-08 00:10:39 +02:00
Dmitry Shmidt
66fe0f703c Add 'SCAN TYPE=ONLY' functionality
Usual manual scan request may cause reassociation due to several
reasons. New command is intended to perform pure scan without taking any
automatic action based on the results.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-02-07 18:09:50 +02:00
Vladimir Kondratiev
ff3ad3c531 Capability matching for 60 GHz band
On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
2013-02-07 16:20:18 +02:00
Raja Mani
3140803b6d nl80211: Add ctrl_iface message for AP mode connection rejection
When AP mode operation reject the client, nl80211 layer advertises the
connect failed event with the reason for failures (for example, max
client reached, etc.) using NL80211_CMD_CONN_FAILED.

This patch adds some debug messages whenever such an event is received
from the nl80211 layer and also the same event is posted to the upper
layer via wpa_msg().

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
2013-02-07 15:24:53 +02:00
Jouni Malinen
409ca9a84d P2P: Allow local configuration to use 5 GHz band 40 MHz channels
These channels were already enabled for P2P use, but the local
configuration parameter was not allowed to use the operating class in
which the 40 MHz channels are specified.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:51:17 +02:00
Amar Singhal
9f42d49c55 Fix BSS RANGE command for no exact id match cases
The RANGE=N1-N2 command did not return any entries in some cases where
N1 does not match with any BSS entry. Fix this by allow entries to be
fetched even without knowing the exact id values.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-07 12:27:52 +02:00
Amar Singhal
cc03d0fef3 Add "BSS LAST ..." command
Add the "BSS LAST ..." command. This command helps in fetching the scan
entries iteratively from FIRST entry to LAST entry by ID.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-06 00:31:34 +02:00
Amar Singhal
f330b4b44b Fix the "BSS FIRST.." command
The "BSS FIRST.." command fails when additional parameters (e.g., MASK)
is used since the string comparsion does not take into account the
number of characters. Fix by comparing only 5 characters as in other
commands.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-06 00:28:48 +02:00
Jouni Malinen
5ebe8c8179 HS 2.0: Fix IE buffer length for extra scan IEs
The HS 2.0 Indication element is 7 (not 6) octets. The previous
implementation could result in wpabuf validation code stopping the
program if HS 2.0 was enabled without Interworking or P2P (which would
have created a large enough buffer to avoid hitting this) being enable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 17:40:09 +02:00
Sunil Dutt
0cb12963b6 TDLS: Fix MIC calculation for teardown frame to depend on reason code
The reason code used for calculating the MIC should correspond to the
reason code with which the teardown frame is sent, as the receiver shall
use the one obtained in the frame for validating the MIC.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 13:36:36 +02:00
Sunil Dutt
3887878e53 TDLS: Remove link, if any, on an implicit set up request
If an implicit TDLS set up request is obtained on an existing link or an
to be established link, the previous link was not removed. This commit
disables the existing link on a new set up request. Also,
wpa_tdls_reneg() function was invoking wpa_tdls_start() on an already
existing peer for the case of internal setup, which is incorrect. Thus
the invocation of wpa_tdls_start() is removed in wpa_tdls_reneg() and
also this function is renamed to wps_tdls_remove() as it does not
renegotiation rather shall remove the link (if any) for the case of
external setup.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 13:27:56 +02:00
Jouni Malinen
283a26f358 TDLS: Move existing-entry check into wpa_tdls_add_peer()
There is no need to have this check copied to each caller since this
needs to be done for every case when a new peer is being added.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 13:16:35 +02:00
Sunil Dutt
cd22fbf85c TDLS: Use existing peer entry if available when processing discovery
Peer entries were getting added on every discover request from the peer,
thus resulting in multiple entries with the same MAC address. Ensures
that a check is done for the presence of the peer entry and reuse the
existing entry instead of adding a new one.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-05 13:10:34 +02:00
Jouni Malinen
2b79164f12 P2P: Fix P2P-GROUP-STARTED event for p2p_connect-join
Commit 50178335bf introduced a regression
for P2P-GROUP-STARTED event indication during p2p_connect-join when
using a separate P2P group interface. wpa_s->global->p2p_group_formation
was already set in that case to point to the group interface and this
commit changed this to point to incorrect interface. Fix this by setting
p2p_group_formation here only in case a separate group interface is not
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-04 15:52:53 +02:00
Jouni Malinen
2d9ffe1e85 P2P: Fix Action frame processing if Interworking is enabled
GAS server used the same public_action_cb mechanism as P2P to process
Action frames. This ended up overriding P2P processing of Action frames
while running an AP/GO interface with a build that enables Interworking
(e.g., for Hotspot 2.0) and a driver that uses hostapd for AP mode
SME/MLME. Fix this by adding a separate callback registration for the
GAS server. This should really be cleaned up by supporting arbitrary
number of callback handlers, but for now, this addresses the regression
with a minimal change.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-02-04 15:38:35 +02:00
Jaewan Kim
391f492532 wpa_supplicant: Fix access to the freed memory when removing all networks
Commit 59ff6653aa fixed this issue for
'removing a network', and we also need to take care of 'removing all
networks'.

Signed-hostap: Jaewan Kim <jaewan at google.com>
2013-02-03 21:22:59 +02:00
Mark Kettenis
5f7ae5e61c Add driver for OpenBSD net80211 layer
Very basic support for OpenBSD.  No support for scanning yet, so this needs
ap_scan=0 and expects that the user has configured the interface manually
using ifconfig(8).

Signed-hostap: Mark Kettenis <kettenis@openbsd.org>
2013-02-03 21:16:29 +02:00
Jouni Malinen
d6bbcce411 Make wpas_select_network_from_last_scan() static
Addition of wpa_supplicant_fast_associate() made it unnecessary to call
wpas_select_network_from_last_scan() directly from other files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 21:13:07 +02:00
Paul Stewart
cecdddc184 wpa_supplicant: Implement fast-associate on SelectNetwork
If scan results are available when we perform a SelectNetwork, use
them to make an associate decision.  This can save an entire scan
interval-worth of time in situations where something external to
wpa_supplicant (like a connection manager) has just previously
requested a scan before calling SelectNetwork.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-02-03 21:08:31 +02:00
Pontus Fuchs
9e737f08d4 Update scan interval gracefully
When the scan interval is changed the new interval is effective
after the old interval timer fires off one last time. This can cause
an unacceptable long delay when updating the interval.

Change this behaviour to use MIN(left of old interval, new interval)
for the scan interval following the interval change.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-02-03 18:14:05 +02:00
Pontus Fuchs
c869536ce9 eloop: Add a timer cancel that returns the remaining time
This new cancel timer will give back the remaining time if it was
pending.

Signed-hostap: Pontus Fuchs <pontus.fuchs@gmail.com>
2013-02-03 17:17:08 +02:00
Jouni Malinen
328bc71776 eloop_win: Update to be closer to the current eloop.c
Some fixes had were made only in eloop.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 17:14:45 +02:00
Jouni Malinen
5960afcd18 eloop_win: Use struct dl_list for timeouts
This merges commit eaa3f04b97 changes from
eloop.c into eloop_win.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 17:14:45 +02:00
Jouni Malinen
fc9d96a78a eloop_none: Update sample to be closer to the current eloop.c
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 17:14:45 +02:00
Jouni Malinen
5617809c93 eloop_none: Use struct dl_list for timeouts
This merges commit eaa3f04b97 changes from
eloop.c into eloop_none.c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 17:07:02 +02:00
Jouni Malinen
5255c9ea0d eloop_none: Fix compilation
eloop.h API had been changed without updating eloop_none.c to match.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 16:30:33 +02:00
Jouni Malinen
3e72dace29 Fix compilation with PMKSA caching support disabled
Commit 6aaac006af modified the
pmksa_cache_init() prototype, but forgot to update the empty wrapper
function which is used when PMKSA caching is not included in the build.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 16:23:13 +02:00
Jouni Malinen
9ebce9c546 nl80211: Do not use void pointer for driver_ops used internally
This allows some more pointer type validation at compile time.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-02-03 15:46:47 +02:00
Ben Greear
085b29f1fe hostapd: Fix crash when scan fails
When scan failed, the wpa_driver_nl80211_scan method tried
to recursively call itself, but it passed in the wrong argument
for the void*, and so then it crashed accessing bad memory.

With this fix, hostapd still will not retry the scan later, but
at least it will exit cleanly and won't polute the file system
with core files.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2013-02-03 13:51:54 +02:00
Sunil Dutt
f2e698de7e TDLS: Disable the link also on driver request for teardown
The link was not disabled for the case of implicit trigger from the
driver unlike in the case of explicit trigger fromc ctrl_iface. Make the
tear down sequences match in these cases by adding the TDLS_DISABLE_LINK
tdls_oper to the driver when processing the TDLS_REQUEST_TEARDOWN event.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-22 14:09:54 +02:00
Jouni Malinen
0321bcdfa8 wlantest: Add radiotap header when re-writing DLT_IEEE802_11 file
When using DLT_IEEE802_11 datalink type in a pcap file, wlantest will now
add a radiotap header to the re-written pcap file to make sure all frames
in the output file will include the radiotap header.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-17 16:31:19 +02:00
Jouni Malinen
2531517600 wlantest: Add -F option for assuming FCS is included
When using DLT_IEEE802_11 datalink type in a pcap file, wlantest can now
be instructed to assume there is an FCS included in the frame by adding
the new -F command line argument. This will make wlantest validate the
FCS and strip it from the frame before processing.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-17 12:55:30 +02:00
Jouni Malinen
dc013f1e37 eapol_test: Remove unnecessary header file inclusion
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-15 12:03:29 +02:00
Pavan Kumar
a16ed53a06 P2P: Send P2P-FIND-STOPPED event in the new continue-search states
The P2P-FIND-STOPPED event was sent only in the P2P_SEARCH state, but
this needs to be send also in the new continue-search-when-ready states
P2P_CONTINUE_SEARCH_WHEN_READY and P2P_SEARCH_WHEN_READY for consistent
behavior.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-01-15 11:52:20 +02:00
Jouni Malinen
90d215b264 Fix wpa_priv build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
a13e1cc345 Fix EAP-pwd server file name for wpa_supplicant AP builds
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
2ee1594da9 Updated test_wpa to use new header file for WPA authenticator
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
04768befa9 Add new binaries to .gitignore
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 19:06:53 +02:00
Jouni Malinen
62769a88db Move cipher to enum wpa_cipher conversion into wpa_common.c
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 18:02:20 +02:00
Jouni Malinen
cf830c1c54 Use a helper function for selection group cipher for AP mode
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:41:40 +02:00
Jouni Malinen
0282a8c46a Use helper function for writing cipher suite names
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:31:36 +02:00
Jouni Malinen
031453265f Define allowed pairwise/group cipher suites in a header file
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:10:38 +02:00
Jouni Malinen
a39c78be41 Use a common function for parsing cipher suites
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 17:06:22 +02:00
Jouni Malinen
edbd2a191e Move cipher suite selection into common helper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 16:58:54 +02:00
Jouni Malinen
9aadb8774e P2P: Add some more details on Service Query TLV format
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-01-13 13:43:54 +02:00