Commit graph

1544 commits

Author SHA1 Message Date
Nikolas Nyby
e9d598d8a8 Update old link to ACS wiki documentation
The old links here were broken.

Signed-off-by: Nikolas Nyby <nikolas@gnu.org>
2021-03-01 11:14:46 +02:00
Xinrui Sun
61a258e784 nl80211: Add ACS support for Broadcom device
BRCM vendor command used to trigger ACS scan. After ACS finished,
DHD driver will send results by event BRCM_VENDOR_EVENT_ACS.

Signed-off-by: Xinrui Sun <xinrui.sun@broadcom.com>
2021-02-27 12:14:09 +02:00
Ben Greear
827b43b3ca RADIUS client: Support SO_BINDTODEVICE
Allow the RADIUS client socket to be bound to a specific netdev. This
helps hostapd work better in VRF and other fancy network environments.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Andreas Tobler <andreas.tobler at onway.ch>
2021-02-27 10:51:15 +02:00
Sunil Dutt
3a05f89edc Android: Add DRIVER command support on hostapd and hostapd_cli
Add DRIVER command support on hostapd and hostapd_cli on Android
similarly to the way this previously enabled in wpa_supplicant and
wpa_cli.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2021-02-26 20:22:41 +02:00
Jouni Malinen
6518c72b02 Multi-AP: Fix backhaul SSID printing condition
ssid->ssid is an array so comparison against NULL is pointless; check
ssid->ssid_len instead.

Fixes: 871d6648f5 ("hostapd: Add multi_ap settings to get_config() output")
Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-21 12:50:34 +02:00
Veerendranath Jakkam
6f92f81dac AP: Check driver's capability to enable OCV when driver SME is used
When the driver SME is used, offloaded handshakes which need Operating
Channel Validation (OCV) such as SA Query procedure, etc. would fail if
hostapd enables OCV based on configuration but the driver doesn't
support OCV. To avoid this when driver SME is used, enable OCV from
hostapd only when the driver indicates support for OCV.

This commit also adds a capability flag to indicate whether driver SME
is used in AP mode.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2021-02-16 00:47:43 +02:00
Veerendranath Jakkam
d36d4209fd Enable beacon protection only when driver indicates support
Enabling beacon protection will cause STA connection/AP setup failures
if the driver doesn't support beacon protection. To avoid this, check
the driver capability before enabling beacon protection.

This commit also adds a capability flag to indicate beacon protection
support in client mode only.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2021-02-16 00:47:43 +02:00
Aloka Dixit
024b4b2a29 AP: Unsolicited broadcast Probe Response configuration
Add hostapd configuration options for unsolicited broadcast
Probe Response transmission for in-band discovery in 6 GHz.
Maximum allowed packet interval is 20 TUs (IEEE P802.11ax/D8.0
26.17.2.3.2, AP behavior for fast passive scanning).
Setting value to 0 disables the transmission.

Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
2021-02-14 23:04:26 +02:00
Aloka Dixit
9c02a0f5a6 FILS: Add generation of FILS Discovery frame template
Add hostapd configuration parameters for FILS Discovery frame
transmission interval and prepare a template for FILS Discovery frame
for the driver interface. The actual driver interface changes are not
included in this commit.

Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
2021-02-14 18:03:49 +02:00
Rajkumar Manoharan
f728c867e3 AP: Extend Spatial Reuse Parameter Set
Extend SPR element to support following fields and pass all
information to kernel for driver use.
 * Non-SRG OBSS PD Max Offset
 * SRG BSS Color Bitmap
 * SRG Partial BSSID Bitmap

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:41:52 +02:00
Rajkumar Manoharan
9f9d3d3625 Allow HE MCS rate selection for Beacon frames
Allow HE MCS rate to be used for beacon transmission when the driver
advertises the support. The rate is specified with a new beacon_rate
option "he:<HE MCS>" in hostapd configuration.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:26:38 +02:00
Rajkumar Manoharan
c3d557b4df hostapd: Add HE 6 GHz band capability configuration
Enable user to configure Maximum MPDU Length, Maximum A-MPDU Length
Exponent, Rx Antenna Pattern Consistency, and Tx Antenna Pattern
Consistency of 6 GHz capability through config file.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2021-02-08 00:09:45 +02:00
Masafumi Utsugi
f98fe2fd00 hostapd: Report errors ACCEPT_ACL/DENY_ACL control interface commands
Return FAIL for couple of the operations that were previously ignoring
invalid addresses without reporting errors.

Signed-off-by: Masafumi Utsugi <mutsugi@allied-telesis.co.jp>
2021-02-07 10:20:58 +02:00
Masafumi Utsugi
15251c6584 hostapd: Fix dynamic ACCEPT_ACL management over control interface
hostapd_disassoc_accept_mac() was called after a new accept MAC address
was added (ACCEPT_ACL ADD_MAC), but this function should have been
called after an accept MAC address was removed and accept MAC list was
cleared to disconnect a STA which is not listed in the update accept MAC
address list. Fix this by moving the call to places where a connected
STA can actually end up losing its previously present accept entry.

Signed-off-by: Masafumi Utsugi <mutsugi@allied-telesis.co.jp>
2021-02-07 10:17:57 +02:00
Raphaël Mélotte
871d6648f5 hostapd: Add multi_ap settings to get_config() output
Since a running hostapd is not necessarily using the settings that are
in the configuration file (if they were changed at runtime, or the file
was changed but not reloaded, etc.), being able to get their value at
runtime can be useful (to know if they have to be updated for example).

If multi_ap is set, also print the SSID and passphrase (or PSK).

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 18:03:58 +02:00
Raphaël Mélotte
4a7e0ac268 hostapd: Add an option to notify management frames on ctrl_iface
In some contexts (e.g., Multi-AP) it can be useful to have access to
some of the management frames in upper layers (e.g., to be able to
process the content of association requests externally).

Add 'notify_mgmt_frames'. When enabled, it will notify the ctrl_iface
when a management frame arrives using the AP-MGMT-FRAME-RECEIVED event
message.

Note that to avoid completely flooding the ctrl_iface, not all
management frames are included (e.g., Beacon and Probe Request frames
are excluded).

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 13:56:18 +02:00
Muna Sinada
2acfd15a2a hostapd: Generalize channel switch methods to incorperated HE mode
Remove the VHT specific naming on methods that are utilized in both VHT
and HE modes.

Signed-off-by: Muna Sinada <msinada@codeaurora.org>
2021-02-06 11:41:09 +02:00
Ilan Peer
f2f8e4f458 Add PTKSA cache to hostapd
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 19:15:47 +02:00
Ilan Peer
2c963a117a AP: Add support for configuring PASN
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 19:15:47 +02:00
Ilan Peer
46c232eb76 WPA: Extend the wpa_pmk_to_ptk() function to also derive KDK
Extend the wpa_pmk_to_ptk() to also derive Key Derivation
Key (KDK), which can later be used for secure LTF measurements.

Update the wpa_supplicant and hostapd configuration and the
corresponding WPA and WPA Auth state machine, to allow enabling of KDK
derivation. For now, use a testing parameter to control whether KDK is
derived.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 18:36:40 +02:00
Disha Das
b709bb40fd DPP2: Add DPP_CONTROLLER commands to hostapd_cli and wpa_cli
Add the DPP control interface DPP_CONTROLLER_START and
DPP_CONTROLLER_STOP commands to the CLIs.

Signed-off-by: Disha Das <dishad@codeaurora.org>
2020-12-16 18:04:15 +02:00
Veerendranath Jakkam
7131fede34 Extend the setband support for 6 GHz and band combinations
Support possible band combinations of 2.4 GHz, 5 GHz, and 6 GHz with
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK attribute. Ensure backwards
compatibility with old drivers that are using
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE attribute and supporting only 2.4 GHz
and 5 GHz bands.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-12-11 19:56:14 +02:00
John Crispin
d83eaa351e Add option to ignore Probe Request frames when RSSI is too low
Add a new hostapd configuration parameters rssi_ignore_probe_request to
ignore Probe Request frames received with too low RSSI.

Signed-off-by: John Crispin <john@phrozen.org>
2020-12-02 17:14:39 +02:00
Shay Bar
eee0d242bb hostapd: Add ability to disable HT/VHT/HE per BSS
Add the ability to disable HT/VHT/HE for specific BSS from hostapd.conf.

- Add disable_11ax boolean to hostapd_bss_config.
- Change disable_11n and disable_11ac to bool in hostapd_bss_config.
- Add configuration option to set these disable_11* parameters
  (which were previously used only automatically based on incompatible
  security parameters to disable HT/VHT).

Signed-off-by: Shay Bar <shay.bar@celeno.com>
2020-12-02 13:41:18 +02:00
Vinita S. Maloo
c2c4686228 Set NLA_F_NESTED flag with NL80211_ATTR_VENDOR_DATA conditionally
The newer kernel versions enforce strict netlink attribute policy
validation and will cause cfg80211 to reject vendor commands with
NL80211_ATTR_VENDOR_DATA if NLA_F_NESTED attribute is not set but
if the vendor command is expecting nested data within
NL80211_ATTR_VENDOR_DATA attribute.

Most of the earlier instances were addressed by adding NLA_F_NESTED
flag in nla_nest_start(). This commit addresses the remaining
instance in which NL80211_ATTR_VENDOR_DATA is populated using data
set by user through the control interface.

Enhance the control interface VENDOR command to indicate whether the
vendor subcommand uses nested attributes within NL80211_ATTR_VENDOR_DATA
attribute or not.

Set NLA_F_NESTED flag for existing QCA vendor commands which use nested
attributes within the NL80211_ATTR_VENDOR_DATA attributes so that the
old frameworks implementations for already existing commands work
without any issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-11-10 23:48:00 +02:00
Yegor Yefremov
d720de929f hostapd: Fix typos
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-10-16 12:45:24 +03:00
Wystan Schmidt
e3b47cdf86 DPP2: Add DPP_CHIRP commands to hostapd_cli and wpa_cli
Add the DPP control interface chirp commands to the CLIs for greater
visibility and ease of use.

Signed-off-by: Wystan Schmidt <wystan.schmidt@charter.com>
2020-10-11 20:26:21 +03:00
Andrew Beltrano
1a0169695b hostapd_cli: Add dpp_bootstrap_set command
Expose DPP_BOOTSTRAP_SET through hostapd_cli command
dpp_bootstrap_set <id> <configurator params..>

Signed-off-by: Andrew Beltrano <anbeltra@microsoft.com>
2020-10-11 19:51:39 +03:00
Johannes Berg
283eee8eed gitignore: Clean up a bit
Now that we no longer leave build artifacts outside the build folder, we
can clean up the gitignore a bit. Also move more things to per-folder
files that we mostly had already anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-11 19:32:50 +03:00
Pali Rohár
58c18bcf86 hostapd: Fix error message for radius_accept_attr config option
Error message contained wrong config option.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-10-10 20:53:01 +03:00
Johannes Berg
ad6e4a5c59 build: Remove hostapd vs. wpa_supplicant build checks
These are no longer needed now. Note that this was never actually
sufficient since src/drivers/ isn't the only thing shared, and thus a
cross-build detection didn't work in all cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:53:38 +03:00
Johannes Berg
722138cd25 build: Put object files into build/ folder
Instead of building in the source tree, put most object
files into the build/ folder at the root, and put each
thing that's being built into a separate folder.

This then allows us to build hostapd and wpa_supplicant
(or other combinations) without "make clean" inbetween.

For the tests keep the objects in place for now (and to
do that, add the build rule) so that we don't have to
rewrite all of that with $(call BUILDOBJS,...) which is
just noise there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:51:39 +03:00
Johannes Berg
0464d5d5d6 build: Move config file handling into build.rules
This will make it easier to split out the handling in
a proper way, and handle common cflags/dependencies.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:49:31 +03:00
Johannes Berg
0430bc8267 build: Add a common-clean target
Clean up in a more common fashion as well, initially for ../src/.

Also add $(Q) to the clean target in src/

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:48:41 +03:00
Johannes Berg
a41a29192e build: Pull common fragments into a build.rules file
Some things are used by most of the binaries, pull them
into a common rule fragment that we can use properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:29 +03:00
Veerendranath Jakkam
debf3e2165 OCV: Work around for misbehaving STAs that indicate OCVC=1 without OCI
Some legacy stations copy previously reserved RSN capability bits,
including OCVC, in (Re)Association Request frames from the AP's RSNE but
do not indicate MFP capability and/or do not send OCI in RSN handshakes.
This is causing connection failures with such erroneous STAs.

To improve interoperability with such legacy STAs allow a workaround OCV
mode to be enabled to ignore OCVC=1 from the STA if it does not follow
OCV requirements in the first protected exchange. This covers cases
where a STA claims to have OCV capability, but it does not negotiate use
of management frame protection or does not include OCI in EAPOL Key msg
2/4, FT Reassociation Request frame, or FILS (Re)Association Reqest.

The previous behavior with ocv=1 is maintained, i.e., misbehaving STAs
are not allowed to connect. When the new workaround mode is enabled with
ocv=2, the AP considers STA as OCV capable on below criteria
- STA indicates both OCV and MFP capability
- STA sends OCI during connection attempt in a protected frame

Enabling this workaround mode reduced OCV protection to some extend
since it allows misbehavior to go through. As such, this should be
enabled only if interoperability with misbehaving STAs is needed.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-10-08 18:46:38 +03:00
Shaakir Mohamed
41f8189057 SAE-PK: Add support to skip sae_pk password check for testing purposes
Add support to skip sae_pk password check under compile flag
CONFIG_TESTING_OPTIONS which allows AP to be configured with
sae_pk enabled but a password that is invalid for sae_pk.

Signed-off-by: Shaakir Mohamed <smohamed@codeaurora.org>
2020-09-11 15:45:42 +03:00
Jouni Malinen
c043b1e000 DPP: Remove unnecessary dpp_global_config parameters
These were not really used anymore since the AP/Relay case did not set
msg_ctx or process_conf_obj in the global DPP context. Get the
appropriate pointers more directly from the more specific data
structures instead and remove these global values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-25 16:02:29 +03:00
Jouni Malinen
4ecb6dd16b DPP2: Controller support in hostapd
Extend hostapd support for DPP Controller to cover the DPP_CONTROLLER_*
cases that were previously implemented only in wpa_supplicant. This
allows hostapd/AP to be provisioned using DPP over TCP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-25 15:53:08 +03:00
Jouni Malinen
0a9d7b169e SAE-PK: Update design for fingerprint encoding into password
Update the SAE-PK implementation to match the changes in the protocol
design:
- allow only Sec values 3 and 5 and encode this as a single bit field
  with multiple copies
- add a checksum character

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-05 22:05:20 +03:00
Jouni Malinen
2f858254cc Extend GET_PMK to check PMKSA cache on the AP
This allows the testing command GET_PMK to return a PMK in cases where
the association fails (e.g., when using SAE and getting a valid PMKSA
entry added before association) or after the association has been lost.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-03 15:38:30 +03:00
Jouni Malinen
f8c756c5b8 FT: Rename temporary blocking of nonresponsive R0KH
Avoid use of the "blacklist" term here to reduce undesired connotations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:25:32 +03:00
Wu Gao
52a3257621 6 GHz: Change 6 GHz channels per IEEE P802.11ax/D6.1
The channel numbering/center frequencies was changed in IEEE
P802.11ax/D6.1. The center frequencies of the channels were shifted by
10 MHz. Also, a new operating class 136 was defined with a single
channel 2. Add required support to change the channelization as per IEEE
P802.11ax/D6.1.

Signed-off-by: Wu Gao<wugao@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2020-06-24 00:29:37 +03:00
Jouni Malinen
cd99a8c432 EAP-TEAP (server): Allow Phase 2 skip based on client certificate
eap_teap_auth=2 can now be used to configure hostapd to skip Phase 2 if
the peer can be authenticated based on client certificate during Phase
1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-06-20 18:07:04 +03:00
Jouni Malinen
c7cb42d531 Remove unused enum values
The last user of these was removed in commit 17fbb751e1 ("Remove user
space client MLME") and there is no need to maintain these unused values
anymore.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:21:06 +03:00
Subrat Dash
411e42673f Move local TX queue parameter parser into a common file
This allows the same implementation to be used for wpa_supplicant as
well.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:17:39 +03:00
Jouni Malinen
4ff0df39eb SAE-PK: Testing functionality to allow behavior overrides
The new sae_commit_status and sae_pk_omit configuration parameters and
an extra key at the end of sae_password pk argument can be used to
override SAE-PK behavior for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 15:21:18 +03:00
Jouni Malinen
0c4ffce464 Allow transition_disable updates during the lifetime of a BSS
This is mainly for testing purposes to allow more convenient checking of
station behavior when a transition mode is disabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 17:06:52 +03:00
Jouni Malinen
fb09ec87f2 SAE-PK: A tool for generating SAE-PK Modifier and password
sae_pk_gen can be used to generate Modifier (M) and password for SAE-PK
based on a previously generated EC private key, Sec value (2..5), and
SSID.

For example, these commands can be used to generate the private key and
the needed hostapd configuration parameter options:

make sae_pk_gen
openssl ecparam -genkey -outform DER -out saepk.der -name prime256v1
./sae_pk_gen saepk.der 3 "SAE-PK test"

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
20ccf97b3d SAE-PK: AP functionality
This adds AP side functionality for SAE-PK. The new sae_password
configuration parameters can now be used to enable SAE-PK mode whenever
SAE is enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00