Commit graph

152 commits

Author SHA1 Message Date
Jouni Malinen
baf4c86379 HS 2.0: Request and process OSU Providers NAI List ANQP-element
Extend wpa_supplicant to use a separate OSU_NAI information from OSU
Providers NAI List ANQP-element instead of the OSU_NAI information from
OSU Providers list ANQP-element when connecting to the shared BSS
(Single SSID) for OSU.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:51:51 +03:00
Jouni Malinen
3ecb8a5203 ANQP: Parse and report Venue URL information
Parse the Venue URL ANQP-element payload and report it with the new
RX-VENUE-URL event messages if the query was done using PMF.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-15 05:17:49 +03:00
Jouni Malinen
6311547e7b HS 2.0: Add Roaming Consortium Selection network profile parameter
This adds new roaming_consortium_selection network profile parameter
into wpa_supplicant. This is used to store the OI that was used for
network selection (INTERWORKING_SELECT) based on matching against the
Roaming Consortium OIs advertised by the AP. This can also be used when
using an external component to perform selection.

This commit adds the network profile parameter, but does not yet include
it in (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:56 +03:00
Jouni Malinen
5b7695275c HS 2.0: Use roaming_consortiums list to match OIs for access
This extends Hotspot 2.0 credential matching to consider the
roaming_consortiums parameter when determining whether the cred block
matches the information advertised by an AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:53 +03:00
Jouni Malinen
aca4d84e3d DPP: Use wildcard BSSID in GAS query frames
Force use of the wildcard BSSID address in GAS query frames with DPP
regardless of how the gas_address3 configuration parameter is set. DPP
specification mandates this and the use of GAS here is really outside
the context of a BSS, so using the wildcard BSSID makes sense even for
the corner case of Configurator running on a known AP (where IEEE 802.11
standard would allow the BSSID of the AP to be used).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-10 12:42:00 +02:00
Ilan Peer
422570eec8 MBO: Fix possible memory leak in anqp_send_req()
In case that an mbo object is allocated, but there is a failure
to resize the wpabuf, need to free the mbo object.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2017-07-08 16:14:03 +03:00
Vidyullatha Kanchanapally
b5db6e5dc4 eap_proxy: Support multiple SIMs in get_imsi()
This allows the eap_proxy mechanism to be used with multiple SIMs by
following the configured sim_num to index which SIM to use for when
fetching the IMSI through eap_proxy.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-06 03:42:32 +03:00
Peng Xu
8d968351a0 Interworking: Add NULL checking for EAP name in phase2/autheap parameter
Add NULL checking for EAP name. If it is NULL, do not add the phase2
parameter autheap. This should not happen in practice due to earlier
checks for credential matching, but if there is a code path that would
allow this to be set, it is better to skip setting of the invalid value
and allow automatic selection of the Phase 2 parameters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-26 13:20:52 +03:00
Jouni Malinen
8b49b530b3 Fix CONFIG_INTERWORKING=y build without CONFIG_HS20=y
Commit 34f2851902 ('MBO: Parse MBO
ANQP-element on STA') started using the type variable outside
CONFIG_HS20 block, but forgot to remove the ifdef from the variable
declaration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-05-01 17:39:14 +03:00
Jouni Malinen
34f2851902 MBO: Parse MBO ANQP-element on STA
This extends the GAS/ANQP parser in wpa_supplicant to process MBO
ANQP-elements and indicate received Cellular Data Connection Preference
values over the control interface.

When a valid MBO ANQP-element is received, the following control
interface message is sent:

RX-MBO-ANQP <BSSID> cell_conn_pref=<value>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-10 18:57:12 +02:00
Jouni Malinen
8ecf2231fd ANQP: Extend ANQP_GET command to request without IEEE 802.11 elements
Previously, ANQP_GET required at least one IEEE 802.11 ANQP-element to
be requested. This is not really necessary, so allow a case where
num_ids == 0 as long as the request includes at least one Hotspot 2.0 or
MBO ANQP-element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-10 17:02:22 +02:00
Avraham Stern
2316cb358c MBO: Add option to add MBO query list to ANQP query
MBO techspec v0.0_r27 changed the MBO ANQP-element format. The MBO
element in ANQP query should now include an MBO Query List element that
contains a list of MBO elements to query.

Add API to add the MBO Query List to an ANQP query.

Format:
ANQP_GET <addr> <info_id>[,<info_id>]...[,mbo:<subtype>...]

Example for querying neighbor report with MBO cellular data
connection preference:
ANQP_GET <bssid> 272,mbo:2

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-03-10 16:53:10 +02:00
Jouni Malinen
9cad618679 FILS: Add Realm Information ANQP-element in BSS data
Add a named BSS command output entry for FILS Realm Information
ANQP-element (anqp_fils_realm_info).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-18 11:41:51 +02:00
Jouni Malinen
a5c723adcf Interworking: Clear SCANNING state if no network selected
Commit 192ad3d730 ('Interworking: Clear
SCANNING state if no match found') did this for the case where no
network matched credentials, but left the SCANNING state in place if
there were a match, but automatic connection was not enabled. Extend
this to cover the case where INTERWORKING_SELECT is not followed by a
connection attempt so that wpa_state is not left indefinitely to
SCANNING.

This fixes a hwsim test case failure in the following sequence:
ap_anqp_sharing scan_trigger_failure

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-11 18:39:12 +02:00
vamsi krishna
8f47917493 MBO: Add support to send ANQP request to get cellular preference
This extends ANQP_GET command to support querying MBO cellular
preference also. The cellular preference can be requested along with
neigbor report by appending mbo:1 to the command arguments.

For example:
ANQP_GET <bssid> 272,mbo:1

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-09-30 22:45:03 +03:00
Jouni Malinen
f465c32dc2 Interworking: Define control interface message prefixes in wpa_ctrl.h
These control interface event message are used by external programs, so
define them a bit more formally in the header file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
0da9869b02 Interworking: Remove unused allow_excluded from interworking_connect()
This argument was set to a hardcoded value 1 and as such, the other
cases were not reachable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-04 17:49:57 +03:00
Jouni Malinen
f7c04e50bd Interworking: Combine identical error returns into a single one
There is no need to maintain separate "return -1;" for each of the
wpa_config_set() calls that cannot really fail in practice.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-03 22:37:01 +03:00
Jouni Malinen
c6c29be1bd Interworking: Add credential realm to EAP-TLS identity
If the configured credential includes a username without '@' (i.e., no
realm) in it and a realm, combine these to form the EAP-Request/Identity
value as "<username>@<realm>" for EAP-TLS. This was already done for
EAP-TTLS as part of the anonymous NAI conversion, but EAP-TLS could have
ended up using a username without any realm information which would be
unlikely to work properly with roaming cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-11 21:06:15 +02:00
Jan Nordqvist
8dd5c1b4e9 HS 2.0: Add a command to retrieve icon with in-memory storage
This adds a new command based Hotspot 2.0 icon retrieval option.

In short, here is the new command sequence:
1. REQ_HS20_ICON <bssid> <file-name>
2. event: RX-HS20-ICON <bssid> <file-name> <size>
3. GET_HS20_ICON <bssid> <file-name> <offset> <size>
   (if needed, repeat with larger offset values until full icon is
   fetched)
5. DEL_HS20_ICON <bssid> <file-name>

REQ_HS20_ICON is a new command that is analogous to HS20_ICON_REQUEST
with the slight difference that an entry to store the icon in memory is
prepared. The RX-HS20-ICON event has been augmented with BSSID,
file-name and size, and GET_HS20_ICON is used to retrieve a chunk of up
to <size> bytes of icon data at offset <offset>. Each chunk is returned
as a base64 encoded fragment, preceded by "HS20-ICON-DATA", BSSID, and
file-name as well as the starting offset of the data.

If there is no entry prepared for the icon when the ANQP result comes
back, hs20_process_icon_binary_file falls back to legacy behavior.

Finally the DEL_HS20_ICON command deletes (all) icons associated with
BSSID and file-name (there could be several if retries are used and they
have different dialog tokens).

Signed-off-by: Jan Nordqvist <jannq@google.com>
2015-12-19 18:34:01 +02:00
Jouni Malinen
67fea55ca2 Interworking: Avoid undefined behavior in pointer arithmetic
Reorder terms in a way that no invalid pointers are generated with
pos+len operations. end-pos is always defined (with a valid pos pointer)
while pos+len could end up pointing beyond the end pointer which would
be undefined behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-24 21:43:54 +03:00
Jouni Malinen
876e74aa5f Interworking: Fix wpa_supplicant build without CONFIG_HS20=y
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
8c4a1026b8 Interworking: Support unknown ANQP-elements in BSS table
This allows wpa_supplicant to expose internally unknown ANQP-elements in
the BSS command. For example, "ANQP_GET <BSSID> 265" can be used to
fetch the AP Geospatial Location ANQP-element and if the AP has this
information, the "BSS <BSSID>" command will include the response as
"anqp[265]=<hexdump>".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Matti Gottlieb
0c28071872 Fix sending ANQP request to an unknown BSS while associated
While being associated, if an ANQP request is received for a different
AP that doesn't exist in the BSS list, the ANQP request will be sent on
the frequency of the AP that we are currently associated to.

In such a case, it is possible that the ANQP request would be sent on
a channel different than that of the requested AP, potentially delaying
other requests/activities.

Avoid sending the ANQP request to an AP that is not in the BSS list.

Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
2015-05-03 17:32:32 +03:00
Jouni Malinen
9f390f431c Interworking: Fix network selection warning without SIM/USIM support
interworking_credentials_available_3gpp() would have left excluded2
uninitialized without INTERWORKING_3GPP in the build. This could result
in a static analyzer warning within
interworking_credentials_available_helper() about use of uninitialized
variable. Get rid of that warning by explicitly initializing excluded2
even though this does not really result in any difference in behavior
since the excluded2 value would be used only if the non-NULL is returned
and that could not have been the case here without INTERWORKING_3GPP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-26 17:00:26 +03:00
Jouni Malinen
192ad3d730 Interworking: Clear SCANNING state if no match found
Previously, it was possible for wpa_state to be left at SCANNING if
INTERWORKING_SELECT command failed to find any match. Now the state is
set to DISCONNECTED if the operation terminates because of no matching
networks.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-03 17:03:25 +02:00
Jouni Malinen
c28059091a Do not add blacklist entries based on normal disconnect request cases
There are number of cases where wpa_supplicant requests the current
connection to be disconnected before starting a new operation. Such
cases do not really indicate that there was an error in connecting or a
disconnection initiated by the AP, so do not add a temporary blacklist
entry in such sequences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 15:54:24 +02:00
ASHUTOSH NARAYAN
5ce6ac11ab Inteworking: Add support to update the ANQP Capability List into the BSS
In addition, add support for returning the capability list through
the BSS control interface command.

Signed-off-by: ASHUTOSH NARAYAN <ashutoshx.narayan@intel.com>
2015-02-21 16:07:53 +02:00
Jouni Malinen
f91a512f1f Add INTERWORKING_ADD_NETWORK command
This can be used to provide more control to upper layers on network
blocks generated as part of Interworking network selection.
INTERWORKING_ADD_NETWORK behaves otherwise identically to
INTERWORKING_CONNECT, but it does not request a new connection after
having added the network block and it returns the network id of the
added network.

INTERWORKING_ADD_NETWORK followed by REASSOCIATE would behave more or
less identically to INTERWORKING_CONNECT, but this allows the created
network profile to be modified, if desired, and/or stored externally.
SELECT_NETWORK can also be used with the network id returned from
INTERWORKING_ADD_NETWORK to enforce that specific network profile to be
used for the next connection (though, it should be noted that this
behavior may not meet all Hotspot 2.0 requirements if there were other
enabled networks that could have higher priority).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-08 22:49:58 +02:00
Ben Greear
99805a0ea1 Interworking: Convert wpa_printf() to wpa_msg()
Also adds a few messages that helped me track down why things
were not working as expected.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-02-01 01:32:25 +02:00
Ben Greear
893e152e64 Interworking: More debug messages
And convert some wpa_printf to wpa_msg.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-01-24 19:37:42 +02:00
Ben Greear
f45bae5b81 Interworking: Add logging to track nai_realm_find_eap failures
There are lots of reasons we can fail to match an EAP credential, so add
logging to help determine why it is happening in various cases.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
5a5aab7f40 Interworking: Remove unnecessary NULL check
nai_realm_find_eap() is called only in cases where the cred pointer is
not NULL.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-24 19:37:42 +02:00
ASHUTOSH NARAYAN
fb09ed3389 Interworking: Notify the ANQP parsing status
The ANQP verification/parsing is done only after the GAS_DONE indication
is sent over the control interface. This means that in case the ANQP
parsing fails there is no indication to the upper layers. Add an
ANQP-QUERY-DONE event that reports the status of the ANQP parsing.

Signed-off-by: ASHUTOSH NARAYAN <ashutoshx.narayan@intel.com>
2015-01-20 02:26:21 +02:00
Jouni Malinen
8266e6c6b4 HS 2.0: Try to use same BSS entry for storing GAS results
Commit 17b8995cf5 ('Interworking: Try to
use same BSS entry for storing GAS results') added a mechanism to try to
pair GAS request and response to a single BSS entry to cover cases where
multiple BSS entries may exists for the same BSSID. However, that commit
did not cover the Hotspot 2.0 ANQP elements. Extend this mechanism to
all ANQP elements. This can help in cases where information in the
Hotspot 2.0 specific ANQP elements got lost if a hidden SSID or some
other reason of duplicated BSS entries was present while doing ANQP
fetches.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 17:47:32 +02:00
Jouni Malinen
a8826b1848 Interworking: Avoid busy loop in scan result mismatch corner cases
It was possible for interworking_find_network_match() to find a possible
BSS match in a case where more thorough checks in
wpa_supplicant_select_bss() reject network. This itself is fine, in
general, but when combined with wpa_supplicant_fast_associate()
optimization and auto_interworking=1, this resulted in a busy loop of up
to five seconds and a possible stack overflow due to recursion in that
loop.

Fix this by limiting the Interworking wpa_supplicant_fast_associate()
call to be used only once per scan iteration, so that new scan
operations can be completed before going through the scan results again.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 01:52:07 +02:00
Jouni Malinen
edd5939a26 Interworking: Start ANQP fetch from eloop callback
Reduce maximum stack use by starting next ANQP fetch operation from an
eloop callback rather than calling interworking_next_anqp_fetch()
directly from interworking_start_fetch_anqp(). This avoids issues that
could potentially make the process run out of stack if long loops of
ANQP operations are executed in cases where automatic Interworking
network selection is used and scan results do not have a full match for
a network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-17 01:51:47 +02:00
Jouni Malinen
568475b70b HS 2.0: Allow CANCEL_FETCH_OSU to stop at scan completion
There is no need to start the GAS/ANQP fetch if the FETCH_OSU operation
has already been canceled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-14 02:28:03 +02:00
Jouni Malinen
d84416a2af Interworking: Make bounds checking easier for static analyzers
'num * 5 > end - pos' handles bounds checking a bit more efficiently,
but apparently that is not clear enough for all static analyzers.
Replace with 'num > left / 5' to avoid false reports. (CID 68117)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-06 19:25:14 +02:00
Jouni Malinen
43aee94899 Interworking: Clearer ANQP element length validation
The upper bound for the element length was already verified, but that
was not apparently noticed by a static analyzer (CID 68128).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 17:41:13 +02:00
Jouni Malinen
8b65fefeed Interworking: Remove unnecessary placeholder for PAME-BI
The PAME-BI bit in the Advertisement Protocol element is reserved for
non-AP STA, so this function will never set that bit to one and as such,
there is not much point in maintaining the placeholder dead code for
this either. (CID 68107)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 20:28:03 +03:00
Jouni Malinen
5dbbf36916 Interworking: Remove unnecessary dead increment
build_root_nai() will not be extended to write something after the
domain, so there is no need to update the pos pointer after the final
os_snprintf() call in the function. Remove this to make a static
analyzer happier.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-02 12:38:48 +03:00
Jouni Malinen
9c6c5589e0 Interworking: Reject EAP configuration with unsupported inner method
Instead of allowing the connection attempt to occur with an unsupported
inner method, check for that explicitly at the time the network block is
added and drop the network if the identified inner method is not
supported.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 16:18:30 +03:00
Mikael Kanstrup
b77aeae732 Interworking: Re-trigger scan if no connect attempt is done
For one specific case when running with Interworking enabled the
re-initialisation of the scan timer is missing. This makes auto connect
to a configured network fail.

The case is:
- Interworking credentials available, but do not match
- Auto interworking is enabled (auto_interworking=1)
- Interworking auto select is disabled (i.e., this is from
  auto_interworking=1, not from INTERWORKING_SELECT auto)
- No configured (enabled and non blacklisted) networks are present
  in scan results list with full match
- Interworking finds matching networks (it does not do full security
  policy match)

This patch covers the case and re-initialises the scan timer to allow
search for a suitable network to continue.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2014-05-31 13:23:00 +03:00
Jouni Malinen
270c9a43e6 Interworking: Allow FT to be used for connection
This extends Interworking network selection to enable FT-EAP as an
optional key_mgmt value to allow FT to be used instead of hardcoding
WPA2-Enterprise without FT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-10 16:15:20 +03:00
Naresh Jayaram
13f6a07efc Add SIM identifier to the network profile and cred block
This allows the specific SIM to be identified for authentication
purposes in multi-SIM devices. This SIM number represents the index of
the SIM slot. This SIM number shall be used for the authentication using
the respective SIM for the Wi-Fi connection to the corresponding
network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-24 12:15:32 +03:00
Jean Trivelly
72300408d4 Interworking: Read IMSI if not read at supplicant start
It is required to read IMSI from SIM if it has not already been done
when comparing HS 2.0 AP 3GPP information with the local credentials.

Signed-off-by: Jean Trivelly <jean.trivelly@intel.com>
2014-03-31 23:44:59 +03:00
Jean Trivelly
62f736dd04 Interworking: Init scard when a credential requires SIM access
When an ANQP fetch is triggered and ANQP_3GPP_CELLULAR_NETWORK info is
required, initialize scard to be ready when comparing ANQP and
credentials.

Signed-off-by: Jean Trivelly <jean.trivelly@intel.com>
2014-03-31 23:35:08 +03:00
Jean Trivelly
729897a388 Interworking: Fix incorrect compile PCSC flag
CONFIG_PCSC is used instead of PCSC_FUNCS.

Signed-off-by: Jean Trivelly <jean.trivelly@intel.com>
2014-03-31 23:29:37 +03:00
Dmitry Shmidt
cf28c66bcb HS 2.0: Extend ANQP_GET to accept Hotspot 2.0 subtypes
This allows a single ANQP query to be used to fetch both IEEE 802.11
defined ANQP elements and Hotspot 2.0 vendor specific elements.

ANQP_GET <addr> <info id>[,<info id>]...
[,hs20:<subtype>][...,hs20:<subtype>]

For example:
ANQP_GET 00:11:22:33:44:55:66 258,268,hs20:3,hs20:4

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-03-25 18:33:21 +02:00