Commit graph

957 commits

Author SHA1 Message Date
Jouni Malinen
9d3d2dbdcb tests: IP address in STATUS
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-26 10:21:48 +02:00
Jouni Malinen
85b60adddd tests: Make ap_ht40_csa and ap_ht40_csa3 less likely to fail
It looks like cfg80211 can trigger disconnection even without disabling
HT, so the same issue may be hit with both of the channel switches in
these test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 23:19:48 +03:00
Jouni Malinen
42a4ba2865 tests: Group formation wait for peer with driver increasing ROC duration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 21:46:39 +03:00
Jouni Malinen
99e5f0e616 tests: Channel switch with HT40
ap_ht40_csa and ap_ht40_csa3 seem to show a cfg80211/mac80211 issue
where a CSA from HT40+ to HT40- channel results in HT getting disabled
due to cfg80211_chandef_compatible() check on c1->width == c2->width
claiming that the new channel is not compatible. For now, comment out
the FAIL case for these known issues to avoid constant failure for cases
that are not wpa_supplicant/hostapd issues. Once the kernel side design
has been reviewed, these error cases can be enabled here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 12:09:02 +03:00
Jouni Malinen
d4792c0cb7 tests: Channel switch with VHT80
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 11:29:28 +03:00
Jouni Malinen
bd5a7691bf tests: Radar detection on HT40 channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-25 10:52:06 +03:00
Jouni Malinen
fbb79f94eb tests: Allow time for go_neg_pbc() GO Neg Resp to go out
It was possible for the not-pre-authorized GO Negotiation case to end up
starting new GO Negotiation before the GO Negotiation Response frame
with status=1 was transmitted. While this works for group formation, it
could reduce test coverage for the common case where that response is
received. At a small sleep to make it less likely for this unexpected
sequence to happen during testing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 16:33:25 +03:00
Johannes Berg
1e3c7e82b5 tests: Disable support_p2p_device by default
When loading the hwsim module, disable support_p2p_device by default.
This will also become the default in the kernel, but until then it
makes sure it's not turned on by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:52 +03:00
Johannes Berg
5a8d165cd8 tests: Use dynamic radio for P2P_DEVICE tests
Use dynamic radios for P2P_DEVICE tests to be able to test
support when the default in hwsim is to not support it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:45 +03:00
Jouni Malinen
9b2c227216 tests: Run run-tests.py as root from run-all.sh
This will be needed to be able to control dynamic mac80211_hwsim
operations like adding and removing a phy. In the past, it has been
possible to start the main programs as root and then use non-root
account for run-tests.py. However, there is already a large number of
cases within the test scripts where sudo is needed. Moving that
requirement to execution of run-tests.py allows those to be simplified
as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-22 10:50:57 +03:00
Jouni Malinen
81ea400d37 tests: P2P SD with GO
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
4181c3964d tests: BSS Load updates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:11 +03:00
Johannes Berg
8a5cc2fe38 tests: Introduce hwsim radio context manager
The new HWSimRadio context manager allows the following
syntax to create (and appropriately destroy) a new radio:

  with HWSimRadio([...]) as (radio_id, iface_name):
    [...]

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Johannes Berg
91d7a9a1c5 tests: Allow creating radio with p2p-device support
For testing P2P-Device support properly, allow dynamically
creating radios with support for it in hwsim.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Jouni Malinen
eb92d389a8 tests: Remove wlan5-related interfaces based on list
Instead of hardcoding reset_devs() to remove wlan5, remove all wlan*
interfaces renaming in the wpa_supplicant process to support the case of
dynamically added hwsim phy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
5f797376f2 tests: Make RELOG command use global control interface
This allows RELOG to be used even if a wpa_supplicant process does not
have any interfaces configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
ce9c8c4097 tests: Use internal DATA_TEST_* functionality instead of hwsim_test
This replaces use of the external hwsim_test tool for most data
connectivity test cases. Only the cases where a special interface
(bridge/VLAN) is used are still executed through hwsim_test.

The internal DATA_TEST_* functionality makes it easier to extend the
connectivity test cases through an external device with real WLAN
hardware instead of the hwsim test setup. In addition, the error reports
from this code can be made more informative.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Luciano Coelho
5d7746b589 tests: Add test cases for AP channel switch announcement
Signed-hostap: Luciano Coelho <luciano.coelho@intel.com>

Skip CSA tests if the driver doesn't support this in AP mode.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 16:04:31 +03:00
Jouni Malinen
a709c5e29f Add a test vector for AES-SIV
This verifies that the AES-SIV implementation results matches RFC 5297
test vector A.1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 12:43:40 +03:00
Jouni Malinen
71c41d45af tests: Provide more details of parallel testing with curses UI
This extends parallel-vm.py to show more details about testing progress
from each VM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 11:19:49 +03:00
Jouni Malinen
9c2d2378ba tests: P2P re-invocation with p2p_add_cli_chan=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 17:00:57 +03:00
Toby Gray
fd1776536b tests: Removing a P2P group via the group control interface
This adds a test which attempts to use the control interface for the
P2P group to remove the P2P group.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-18 16:22:25 +03:00
Jouni Malinen
19d3a6e364 tests: SAE PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:03:17 +03:00
Jouni Malinen
414236b5db tests: RADIUS accounting with PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 10:20:07 +03:00
Jouni Malinen
a87e123a96 tests: Add Python-version of parallel-vm.sh
This is a more advanced version of the simple parallel-vm.sh script.
Status of each VM is printed out during the test and results are
provided in more convenient format in the end.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 21:49:36 +03:00
Jouni Malinen
3f08d1cde8 tests: WPS PBC triggered based on hostapd event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:58:04 +03:00
Jouni Malinen
6503deb9ac tests: Wi-Fi Display element updates and P2P-DEVICE-FOUND
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:46:24 +03:00
Jouni Malinen
0a5787162a tests: Make ap_hs20_fetch_osu more robust under heavy load
Use scan_for_bss() instead of scan() to avoid errors if the active scan
fails, e.g., due to heavy load under parallel-vm.sh test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 12:38:18 +03:00
Jouni Malinen
89f20842f6 tests: OpenSSL cipherlist configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:59:04 +03:00
Jouni Malinen
b43ac5d5ab tests: P2P group formation with WSC_Done missing
This verifies that GO is able to complete group formation even if the
P2P Client does not send WSC_Done message (or that message is dropped
for any reason) in case the P2P Client completes 4-way handshake
successfully.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
cf0b9c86c5 tests: 4-way exchange using external EAPOL I/O
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
64502039c0 tests: Make ap_hs20_session_info more robust
It looks like mac80211 scan-while-associated can now take over 10
seconds with the current wireless-regdb rules for world roaming due to
number of additional DFS channel having been enabled for passive
scanning. This resulted in ap_hs20_session_info failing due to the wait
for the scan result event timing out. That is not really a real failure,
so increase the timeout to avoid reporting this incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 00:37:07 +03:00
Jouni Malinen
74ed673f33 tests: VHT 80+80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 14:27:23 +03:00
Jouni Malinen
bc86d8c158 tests: Fix DFS radar-during-CAC test case
This uses mac80211_hwsim dfs_simulate_radar to get the real kernel side
CAC operation executed and aborted due to radar detection. This allows
another channel to be selected properly through another CAC run.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 02:10:34 +03:00
Jouni Malinen
831cb7af96 tests: Extend DFS testing to include channel switch
Simulate a radar detection event to verify that hostapd switches
channels properly and the station follows the AP to the new channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 01:23:21 +03:00
Jouni Malinen
c634d320ef tests: Re-enable DFS connection check
It looks like association with DFS works fine with the current kernel
version, so re-enable this part of the DFS test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:27:12 +03:00
Jouni Malinen
6259fd814b tests: VHT with 160 MHz channel width
Since this requires a recent CRDA version and updated wireless-regdb, do
not report failures yet (i.e., indicate that the test case was skipped
if AP startup fails).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:18:39 +03:00
Jouni Malinen
b1f4015cf5 test-aes: Allow NIST key wrap test vectors to be verified
This allows the aes_wrap() and aes_unwrap() implementation to be
verified against KW_{AE,AD}_{128,192,256}.txt test vectors from
http://csrc.nist.gov/groups/STM/cavp/documents/mac/kwtestvectors.zip

For example:
./test-aes NIST-KW-AE kwtestvectors/KW_AE_128.txt
./test-aes NIST-KW-AE kwtestvectors/KW_AE_192.txt
./test-aes NIST-KW-AE kwtestvectors/KW_AE_256.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_128.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_192.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_256.txt

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:10 +03:00
Jouni Malinen
eefec1e40b AES: Extend key wrap design to support longer AES keys
This adds kek_len argument to aes_wrap() and aes_unwrap() functions and
allows AES to be initialized with 192 and 256 bit KEK in addition to
the previously supported 128 bit KEK.

The test vectors in test-aes.c are extended to cover all the test
vectors from RFC 3394.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:06 +03:00
Jouni Malinen
b9dee18ffe tests: VENDOR_ELEM_REMOVE of the second IE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 00:43:50 +03:00
Jouni Malinen
5b7aeddcd7 tests: OKC with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
35a7646bb1 tests: PMKSA cache with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
2cde175a93 tests: PMKSA cache entry timeout based on Session-Timeout
This verifies that hostapd uses Session-Timeout value from Access-Accept
as the lifetime for the PMKSA cache entries and expires entries both
while the station is disconnected and during an association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
8e1fc78e1f tests: PMKSA caching disabled on AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
393869c551 tests: External MAC address change
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:41:33 +03:00
Jouni Malinen
c4a8c173b8 Revert "tests: Skip ap_wpa2_tdls_concurrent_init on failure"
This reverts commit bf700cc3d2. The
concurrent initialization test case is now expected to work again with
the STA entry added early enough to avoid the recently added mac80211
validation step failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:53:38 +03:00
Arik Nemtsov
77835ae9dd tests: Verify TDLS responder teardown in encrypted network
Older mac80211 implementations did not set the link identifier
appropriately, resulting in an incorrect teardown packet being sent the
peer. wpa_supplicant adds the FTE containing the MIC field calculated
using the correct link-identifier. This causes a MIC failure on the
other side and the teardown is discarded. Verify this case is fixed by
newer kernel and wpa_supplicant code.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
2014-10-03 11:53:31 +03:00
Jouni Malinen
b5db69197a tests: Random MAC addresses while maintaining OUI
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-30 00:40:23 +03:00
Jouni Malinen
c1d1b6998d tests: Update server and user certificates
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-30 00:40:23 +03:00
Jouni Malinen
d1fc5736cc tests: FDB entry addition/removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-29 14:03:15 +03:00
Jouni Malinen
7c33a65671 tests: P2P_PROV_DISC auto
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:56:06 +03:00
Jouni Malinen
746327ca86 tests: P2P service discovery no protocol/match cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:44:24 +03:00
Jouni Malinen
06f94fd0e1 tests: Increase P2P persistent group with per-STA PSK coverage
Remove and re-start the persistent group manually to increase test
coverage to include the case of re-configuring the PSK list entries from
a stored persistent group.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 18:09:53 +03:00
Jouni Malinen
4a7d73d161 tests: Make ap_hs20_random_mac_addr more robust
If the previuous test case used a non-RSN AP and that was left in
cfg80211 scan results, it was possible for ap_hs20_random_mac_addr to
pick that old AP from the previous test and reject to connect through
Hotspot 2.0 mechanisms. Work around this test issue by requesting new
set of scan result at the beginning of the test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 17:51:09 +03:00
Jouni Malinen
e5a79e3f93 tests: WPS while connected
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-28 11:03:48 +03:00
Jouni Malinen
816e3df972 tests: Random MAC address use
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 20:07:55 +03:00
Jouni Malinen
321c7f6034 tests: Make ap_wps_er_add_enrollee more robust under load
The scan for WPS-AUTH validation may miss a Probe Response frame if the
hostapd process gets blocked under load, e.g., when testing with
parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:17:17 +03:00
Jouni Malinen
377babb205 tests: Fix autogo_bridge to clear autoscan setting
Previously, periodic autoscan could have been left running and that
could result in the following test cases failing in some cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
852cb016d2 tests: Make ap_hs20 test cases more robust
Some of the test cases where using INTERWORKING_SELECT internally
without using scan_for_bss like the helper functions did. Add explicit
scan_for_bss calls to make the test cases less likely to fail due to
missing BSSes in scan results. This could cause false failure reports
when runnign under heavy load with parallel-vm.sh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
bbf20ca265 tests: Use TYPE=ONLY scan for scan_for_bss
This avoids unexpected connection attempts in cases a matching network
is enabled and there is no existing connection (e.g., when testing with
ENABLE_NETWORK no-connect option).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 16:12:41 +03:00
Jouni Malinen
bf700cc3d2 tests: Skip ap_wpa2_tdls_concurrent_init on failure
A mac80211 TDLS validation change ended up breaking test functionality
that was needed for this test case. Instead of reporting this known
issue as a FAIL every time, mark the test as SKIP since the issues is
known and there are no plans of "fixing" it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 11:30:56 +03:00
Jouni Malinen
36e7fbce34 tests: PMKSA_FLUSH
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-27 10:50:19 +03:00
Jouni Malinen
a567aae4a1 tests: Roaming policy change with the bssid parameter
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-11 15:59:42 +03:00
Jouni Malinen
d885a0ba7c tests: P2P GO netdev in a bridge
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-01 16:27:27 +03:00
Jouni Malinen
a0fd2ae643 tests: WPS mixed-WPA/WPA2 credential merging
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-29 20:25:18 +03:00
Jouni Malinen
d6df0d7e62 tests: Verify that sec_dev_type gets reported for P2P peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-27 16:22:53 +03:00
Jouni Malinen
4b15c3f256 tests: P2P GO channel preference and regulatory rule mismatch
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-08-26 17:57:26 +03:00
Jouni Malinen
9a5cfd7007 tests: No EAP fast session resumption between network blocks
Verify that EAP fast session resumption is skipped if the connection
uses a different network configuration than the last EAP connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-07-26 20:23:08 +03:00
Jouni Malinen
1f41a20c92 tests: P2P vendor specific extensions
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-08 15:57:30 +03:00
Jouni Malinen
f1a36a53a5 tests: update_identifier in network block
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 15:51:20 +03:00
Jouni Malinen
8094a0077a tests: Fix wpas_ctrl_country to match the fixed event data
This test case for enforcing the incorrect init=DRIVER instead of
init=CORE for the event due to bug in the event message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 13:34:34 +03:00
Jouni Malinen
e8e571d7ce tests: SCAN scan_id
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-07-02 12:52:08 +03:00
Jouni Malinen
31424fa732 tests: P2P passphrase length configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-22 00:17:18 +03:00
Jouni Malinen
6c080dfab2 tests: EAP-SIM/AKA/AKA' protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 20:34:25 +03:00
Jouni Malinen
72cbc6847b tests: EAP-SIM external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 19:43:11 +03:00
Jouni Malinen
d8e02214ea tests: EAP-AKA external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 11:30:57 +03:00
Jouni Malinen
32747a3eee tests: EAP-SIM/AKA invalid Milenage key configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-20 10:59:08 +03:00
Jouni Malinen
e4719179cb tests: SA Query rate limiting on burst of unprotected Deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-19 20:59:46 +03:00
Jouni Malinen
e0534ecf90 tests: EAP-PSK protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-18 00:13:56 +03:00
Jouni Malinen
7eb33a8f99 tests: Make concurrent_grpform_while_connecting2 more robust
It was possible for this test case to fail due to PBC overlap that was
detected based on previous test case having used PBC. Make that false
positive less likely to happen by explicitly clearing the scan cache on
dev[1].

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-16 17:07:25 +03:00
Jouni Malinen
2eae05f780 tests: EAP protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 19:01:59 +03:00
Jouni Malinen
0954431621 tests: EAP-PAX protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 17:36:53 +03:00
Avraham Stern
62fbc0a784 tests: GO configured preferred channels are disallowed
Verify that when all configured preferred channels are disallowed,
the GO is instantiated on a random channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-15 00:46:15 +03:00
Avraham Stern
eb383fc48e tests: Autonomous GO random channel selection
Verify that a standalone GO selects a random channel from the social
channels in case no other preference is set.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
8d74469e61 tests: P2P GO negotiation when two peers force different freq
Verify that when trying to form a P2P group but each peer forces a
different frequency, the group formation fails.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
744a214bdb tests: Frequency set as no GO
Verify that when setting frequency as no_go_freq and setting up
autonomous GO, the GO is instantiated on a different frequency, but
when forming a P2P group and becoming a client this frequency can be
used.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
87e5dd0af1 tests: GO with preferred channel and station on a disallowed channel
Verify that when setting up autonomous GO with configured preferred
channel and a station interface is connected on a channel that is
disallowed for P2P, the GO is instantiated on the preferred channel.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
b1f0cd8b4c tests: Autonomous GO with preferred channel and station on another channel
Verify that when setting up an autonomous GO with configured preferred
channel and a station interface is on another channel, the GO is
instantiated on the same channel as the station interface and not on the
configured preferred channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:32 +03:00
Avraham Stern
72f659238c tests: GO negotiation with forced freq different than station interface
Verify that when a station interface is on one frequency, and GO
negotiation is started in which both sides force a different frequency,
the P2P group is formed on the forced frequency (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:09 +03:00
Haim Dreyfuss
031220832b tests: Autonomous GO force different channel than station interface
After station interface is connected on a specific channel, create
autonomous GO with forced different channel.

Requires MCC.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:08:54 +03:00
Avraham Stern
23aec8ffd6 tests: GO negotiation with station interface on a P2P-disallowed channel
Verify that when P2P group is formed and a station interface is
connected on a channel that is disallowed for P2P, the group is formed
on a different channel than the BSS (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:08:53 +03:00
Avraham Stern
4b47d977c5 tests: GO with station interface on a P2P-disallowed channel
Verify that when setting up an autonomous GO and station interface is
connected on a channel that is disallowed for P2P uses, the GO is
instantiated on a different channel than the station mode connection.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:05:17 +03:00
Avraham Stern
9c69efc144 tests: GO negotiation with station interface is connected
Verify that when station interface is connected and GO negotiation is
initiated, the P2P group is formed on the same channel as the station
connection.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:04:41 +03:00
Haim Dreyfuss
ef59926999 tests: Autonomous GO channel selection following BSS
This test verifies that if a GO is instantiated after a connection of a
station interface, the chosen operating channel is that of the station
interface.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:04:08 +03:00
Haim Dreyfuss
5fe7a42601 tests: Add wpasupplicant get_mcc helper function
The function returns the number of concurrent channels supported by the
driver.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:49:17 +03:00
Haim Dreyfuss
57d909eeff tests: Add channels argument to run-all.sh and start.sh
Add an option to run-all.sh and start.sh to get as an argument the
number of concurrent channels that mac80211_hwsim will be loaded with.
To start mac80211_hwsim with more than one channel, the following
parameter should be added to command line: channels=<num_channels>
The default is one channel (no concurrent channels).
The driver should be loaded with multi channel support in order to run
some tests.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:47:51 +03:00
Jouni Malinen
30d62b7a88 tests: EAP-EKE protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 17:27:12 +03:00