Commit graph

1960 commits

Author SHA1 Message Date
Jouni Malinen
fe5aa8cb9c tests: EAP-pwd local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
d5482411cf tests: EAP-MD5 local error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-21 18:00:33 +02:00
Jouni Malinen
6fb8b4bf84 tests: AP with open mode and select network twice
This verifies that the second SELECT_NETWORK for the same network starts
a new scan immediately if the previous connection attempt is waiting for
the next scan iteration to start.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-20 00:48:25 +02:00
Jouni Malinen
364418661d tests: PMKSA caching and EAPOL reauthentication
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:36 +02:00
Jouni Malinen
4013d6885b tests: Verify EAPOL reauthentication after FT protocol
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 21:16:29 +02:00
Jouni Malinen
119562cfdf tests: Clear FST sessions at the end of fst_setup_mbie_diff
This avoids issues with following test cases failing due to unexpected
starting state. This issue showed up with the following hwsim test case
sequence:
fst_setup_mbie_diff fst_dynamic_iface_attach

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-19 17:33:34 +02:00
Jouni Malinen
4f524e99d2 tests: Clear scan cache at the end of ap_wps_per_station_psk
It was possible for the WPS PBC state to get cached through to the
following test cases and that would trigger false failures. Fix this by
explicitly clearing the scan cache at the end of ap_wps_per_station_psk.
This issue was triggered with the following test case sequence:
ap_wps_per_station_psk autogo_pbc

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-18 18:03:22 +02:00
Jouni Malinen
89a79ca2b9 tests: Force hw capability re-fetch at the end of dbus_connect_oom
This is needed since the forced OOM may have forced the cached
information to be invalid or dropped. This issue was hit with the
following hwsim test case sequence:
ap_interworking_scan_filtering fst_sta_config_llt_large dbus_connect_oom
wpas_ctrl_enable_disable_network

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-11-17 19:50:34 +02:00
Jouni Malinen
1992af115a tests: D-Bus P2P and InvitationReceived
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-17 19:50:34 +02:00
Jouni Malinen
2299b54383 tests: D-Bus SaveConfig
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-15 19:08:05 +02:00
Jouni Malinen
8a848fae66 tests: EAP-pwd protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
8823178c96 tests: Start WNM-Sleep Mode in wnm_action_proto*
This is needed to avoid test case failures with additional state
validation in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
63a19e56b0 tests: WNM Action protocol testing (PMF disabled)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-10 18:40:54 +02:00
Jouni Malinen
d0f56772ea tests: Fix wpas_ctrl_network for builds without Suite B support
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-02 00:30:00 +02:00
Jouni Malinen
f2d789f20b tests: EAP-pwd with Brainpool EC
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 11:30:48 +02:00
Jouni Malinen
1720ff58ec tests: More SET_CRED coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 01:03:45 +02:00
Jouni Malinen
71a3b85fff tests: mesh_basic_rates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:50:17 +02:00
Jouni Malinen
dd5e61b4d8 tests: Additional SET_NETWORK coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:46:09 +02:00
Jouni Malinen
4128f53d8b tests: Additional wpa_supplicant SET ctrl_iface command coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-01 00:28:35 +02:00
Jouni Malinen
3392a90dec tests: Clear config_methods at the end of wpas_ctrl_set_wps_params
It was possible for dev[2] to be left with non-default config_methods
parameter at the end of the test case and that could result issues in
following test cases. This hit a failure in the following sequence:
wpas_ctrl_set_wps_params p2ps_channel_active_go_and_station_same

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 21:56:59 +02:00
Jouni Malinen
a63ebc159d tests: Fix wifi_display_parsing
Due to a typo in a function name, this test case ended up running
without the final cleanup. That could result in the following test cases
failing, e.g., when running this sequence:
wifi_display_parsing dbus_p2p_go_neg_auth

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:31:03 +02:00
Jouni Malinen
d4c3c055d5 tests: EAP-SIM DB error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-31 16:28:33 +02:00
Jouni Malinen
a6cc1e5747 tests: VHT with 160 MHz channel width and no DFS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-30 16:15:40 +02:00
Dan Williams
f0ef68892e tests: Add testcases for interface global properties
Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-28 23:41:33 +02:00
Jouni Malinen
8901189c0f tests: Update hapd_ctrl_set_error_cases RTS/fragmentation threshold
The previously used invalid values will become allowed with the
following commits, so change the test case to use values that both were
and will continue to be invalid to avoid unnecessary failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-28 20:53:15 +02:00
Jouni Malinen
7f2fea59ea tests: P2P device discovery and control character in Device Name
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-26 23:43:45 +02:00
Jouni Malinen
9cd8859ed6 tests: Fix scan flush in p2ps_channel_both_connected_same
Need to do this before associating with the AP and with the correct
devices.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:59:07 +02:00
Jouni Malinen
e1195efd1e tests: Skip radius_acct_ipaddr if kernel does not support ProxyARP
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-26 00:47:47 +02:00
Jouni Malinen
fde35be9b1 tests: WPA2-PSK AP with PMF required and PMF disabled on STA
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
c4082f7839 tests: WNM Action protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9464e0996e tests: P2P autonomous GO and no P2P IE in Probe Response scan results
autogo_scan verifies the special case where a Probe Response frame
without P2P IE has been received from a GO (e.g., due to a non-P2P
interface requesting a scan) and P2P information from a Beacon frame
needs to be used instead to determine that the group is persistent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
9cb3413090 tests: Move P2P helper functions to a separate file
This makes it easier to import these into the P2P test scripts.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:17 +02:00
Jouni Malinen
046e63fa2b tests: Interworking network selection and ANQP format errors
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bd886d47c5 tests: P2P protocol tests for service discovery messages
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
97f8544305 tests: P2P protocol tests for Group Info parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
10649029ca tests: Wi-Fi Display extensions to P2P and special parsing cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-25 19:37:16 +02:00
Jouni Malinen
bf0ec17a51 tests: EAP-GPSK error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 21:42:36 +03:00
Jouni Malinen
2ab957afc5 tests: RADIUS Accounting and Framed-IP-Address
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:55:12 +03:00
Jouni Malinen
dd0d294d2f tests: Maximum STA count and limit on Probe Response frames
This verifies hostapd behavior with no_probe_resp_if_max_sta=1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-17 19:31:17 +03:00
Avraham Stern
cf0dffd67e tests: Change wpas_config_file test for dedicated P2P Device case
SAVE_CONFIG command on the global control interface tries to save
the config file on all interfaces. The test disabled updating the
config file only on one interface, thus for configurations that
support a dedicated P2P Device interface, saving the config file
would still have succeeded on the P2P Device interface.

Fix the test by disabling updating the configuration file on the global
control interface (which will, in practice, disable this for the P2P
Device interface) in addition to disabling it on the main interface.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:34:04 +03:00
Avraham Stern
c5d070f249 tests: Set MAC address in wpas_ctrl_interface_add2 test
mac80211_hwsim only supports 2 different MAC addresses.
Configurations that use a dedicated P2P Device interface already
use these 2 addresses, so adding another interface on the same
PHY results in a duplicated MAC address.

Fix this by changing the MAC address of the added interface to make
sure the new interface has a unique MAC address.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:26:48 +03:00
Avraham Stern
f487e306b9 tests: Set bridge ageing in ap_wpa2_bridge_fdb test
Set the bridge ageing to 1 sec to make the bridge clear unused
addresses after this interval. Otherwise the test depends on
the local configuration of brctl.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:22:54 +03:00
Avraham Stern
f3b7761ab7 tests: Fix ap_cipher_tkip_countermeasures_sta test
Write the main interface address to the tkip_mic_test debugfs file
to generate Michael MIC failure event (which is different than the
p2p_dev_addr when a dedicated P2P Device interface is used).

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2015-10-16 20:11:05 +03:00
Jouni Malinen
faee294f1e tests: P2P GO Negotiation special cases
These test cases verify behavior with parallel scan operations while
going through GO Negotiation and duplicated GO Negotiation Request frame
RX with not-yet-ready sequence in GO Negotiation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:40 +03:00
Jouni Malinen
754c68de16 tests: Fix P2P message construction byte order for config_method
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-15 21:31:03 +03:00
Dan Williams
d7273180c6 tests: Fix VM tests for Fedora
Binaries aren't always in /usr/bin/, plus kvm is sometimes 'qemu-kvm'.

Signed-off-by: Dan Williams <dcbw@redhat.com>
2015-10-14 19:23:00 +03:00
Jouni Malinen
78185978ed tests: Fix regulatory domain reset in FST test case failure cases
send_iface_detach_request() can fail and that resulted in skipping a
call to restore_reg_domain() and leaving unexpected country
configuration for following test cases. This could result in failures,
e.g., in this sequence: fst_proto wpas_mesh_open_5ghz

Fix this by ignoring exceptions from send_iface_detach_request() and
continuing to restore regulatory domain.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-14 18:43:26 +03:00
Jouni Malinen
4150c7c97c tests: Fix p2ps_channel_both_connected_same
I modified this test case for commit
eabf083984 ('tests: P2PS channel
handling') to use dev[2] instead of dev[0], but forgot to update the
p2ps_connect_p2ps_method() dev list to match that. Fix this to actually
use a concurrent connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-13 18:57:20 +03:00
Jouni Malinen
d679ab74a5 tests: D-Bus ExpectDisconnect
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-12 18:14:21 +03:00
Jouni Malinen
7966674d73 tests: Fix dbus_interface to restore P2P channel list to default
It was possible for the dbus_interface test case to leave the P2P
channel lists with 5 GHz channels enabled due to the special driver=none
case. This could make the following P2P test case fail due to selecting
an unexpected channel. Fix this by forcing P2P channel list update at
the end of the dbus_interface test case.

This was triggering with the following hwsim test case sequence:
dbus_interface p2ps_connect_adv_go_p2ps_method_group_iface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-12 15:36:46 +03:00
Jouni Malinen
7c0d66cf7a tests: EAP-MSCHAPv2 error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-12 01:55:00 +03:00
Jouni Malinen
fd8f443247 tests: Dynamic radio in p2ps_channel_sta_connected_disallow_freq_mcc
Use a dynamic HWSimRadio in p2ps_channel_sta_connected_disallow_freq_mcc
to allow MCC test case to be executed in default setting (MCC disabled
for the default radios).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
3392503eb0 tests: Speed up P2PS test cases using join-a-group
Figure out GO operating frequency and use a single channel scan with
P2P_CONNECT-join.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
0033eea533 tests: Speed up p2ps_active_go_seeker by using a single-channel scan
There is no test coverage benefit from using all-channels scan in
P2P_CONNECT-join here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
7dd55f2486 tests: Speed up p2ps_connect_adv_go_persistent
Stop the pending P2P_LISTEN operation priot to issuing P2P_GROUP_ADD to
start a GO. This avoids excessively long wait for the previous Listen
step to complete before being able to start the GO. This makes
p2ps_connect_adv_go_persistent take significantly less time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Jouni Malinen
85ceafd39a tests: Make P2PS tests less likely to fail in P2PS-PROV-DONE timeouts
The combination of starting P2P extended listen and issuing
P2P_ASP_PROVISION_RESP almost immediately after that while in P2P_LISTEN
state resulted in caes where the advertiser could end up going back to a
long listen state while trying to retransmit PD Request. This resulted
in p2ps_provision() timing out while waiting for P2PS-PROV-DONE
especially in p2ps_feature_capability_* test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 21:42:03 +03:00
Ilan Peer
eabf083984 tests: P2PS channel handling
Add tests to verify proper handling of channel considerations in P2PS
PD.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Ilan Peer
a537887074 tests: Add role parameter to asp_provision
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-11 21:42:03 +03:00
Jouni Malinen
f56478ab88 tests: P2PS advertisement as GO having persistent group (no peer entry)
This is a regression test case for the dev NULL pointer dereference in
p2p_build_prov_disc_resp().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 12:31:30 +03:00
Jouni Malinen
37211e15fa tests: EAP-MSCHAPv2 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-11 00:59:58 +03:00
Jouni Malinen
0d2a7bad0f tests: MSCHAP UTF-8 to UCS-2 conversion error cases
This triggers all three error cases in utf8_to_ucs2().

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-10 18:41:22 +03:00
Jouni Malinen
d79ce4a6ce tests: Additional OCSP coverage
Verify OCSP stapling response that is signed by the CA rather than a
separate OCSP responder. In addition, verify that invalid signer
certificate (missing OCSP delegation) gets rejected.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-10 17:32:53 +03:00
Jouni Malinen
0c6185fc73 tests: Run through OCSP tests with BoringSSL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-09 23:48:30 +03:00
Max Stepanov
8cc4b06f75 tests: P2PS follow-on PD Request with status 11
Add a test case verifying deferred P2PS provision discovery when an
advertiser sends the status 11 (Fail: reject by user) in the follow-on
PD Request.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
9773ea38cf tests: Put seeker into extended listen when deferred PD is expected
Not doing so may result in a deferred PD flow failure (currently the
hwsim tests succeeded because seeker never stopped find, spending enough
time listening, so the follow-on PD would succeed).

Fix this by calling p2p_ext_listen when the seeker receives a deferred
PD failure event. Cancel extended listening when PD is done and also
stop find when seek is done.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Andrei Otcheretianski
a3dc75020a tests: Add extended listen functions to WpaSupplicant
Add p2p_ext_listen() and p2p_cancel_ext_listen() functions.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2015-10-07 17:07:21 +03:00
Jouni Malinen
1c532fd5c0 tests: GAS/ANQP and extra ANQP elements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-07 17:07:21 +03:00
Michael Braun
ee2b0d19f5 tests: Verify group encryption is set up for VLANs early
Check that there are no unencrypted frames when using hostapd with VLANs
and WPA before the first station connects to the VLAN.

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2015-10-06 01:25:39 +03:00
Jouni Malinen
a359c7bb23 tests: Read monitor messages more frequently
These test cases left at least one of the attached monitor sockets
blocking for excessive time: ap_wpa2_eap_aka_ext,
ap_hs20_req_conn_capab_and_roaming_partner_preference,
ap_hs20_min_bandwidth_and_roaming_partner_preference, ap_wpa_ie_parsing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 20:45:20 +03:00
Jouni Malinen
57ff37d0e8 tests: Speed up hostapd_oom_loop tests
At some point, these hostapd_oom_* test cases started to fail with
wpa_msg() allocation failure for the AP-ENABLED event. This resulted in
unnecessary long test execution (waiting 30 seconds for an event that
was dropped). Speed this up by using a shorter timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
35d2e24bc7 tests: Read monitor events explicitly in wpas_ctrl_interface_add_many
This test case ended up hitting control socket output queue limit
unnecessarily due to the test script not reading pending event messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
d9052150eb tests: wpa_supplicant control socket and event burst
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 18:52:38 +03:00
Jouni Malinen
4b9d79b66e tests: Make it less likely to overflow wlan5 control iface socket
Number of test cases did not read all control interface socket events
from the dynamically added wlan5 interface. This could result in hitting
maximum socket TX queue length and failures in the following test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 01:42:42 +03:00
Jouni Malinen
7d56bd734c tests: Fix connect_cmd_roam with old scan results
connect_cmd_roam did not force a new scan to find the second AP. This
could result in failures due to the ROAM command getting rejected, e.g.,
in the following test case sequence: wext_pmksa_cache connect_cmd_roam.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-04 00:35:12 +03:00
Ilan Peer
cd27374f5f tests: Modify p2p_channel to also support CSA
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-10-03 21:42:33 +03:00
Johannes Berg
f227043711 tests: AP Channel Switch, one switch with only ECSA IE
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-03 21:37:28 +03:00
Jouni Malinen
dd124ee821 tests: hostapd WPS UPnP web OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-03 18:04:13 +03:00
Jouni Malinen
aeba66b28e tests: Fix OCSP response for ap_wpa2_eap_ttls_ocsp_revoked
Due to a serial number mismatch, the correct "revoked" status was not
used; instead "unknown" was used. While the test case would not fail for
this, incorrect code path was checked.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-02 19:16:04 +03:00
Jouni Malinen
242339ded1 tests: WPA2-PSK and retry for EAPOL-Key msg 3/4
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-10-01 18:55:19 +03:00
Jouni Malinen
403610d386 tests: Update server and user certificates (2015)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-10-01 01:37:47 +03:00
Johannes Berg
b1f69186d2 tests: Add test for hostapd cli ordering
When the 'SET wpa 2' command is executed last, it seems to somehow
reset parts of the settings, causing hostapd to beacon with the
pairwise cipher suite selector set to 00-0F-AC:0 (none/use-group).
This is not permitted and should be rejected; wpa_supplicant also
cannot connect.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-27 15:55:11 +03:00
Jouni Malinen
f455998afe tests: WPA2-Enterprise interactive identity entry and ENABLE_NETWORK
This verifies that ENABLE_NETWORK does not trigger reconnection if
already connected. The previous commit fixed a case where it was
possible for that to happen.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-22 12:03:53 +03:00
Jouni Malinen
53bd8653c2 tests: WPS and DISABLE/ENABLE AP
This is a regression test case for the issue fixed by the previous
commit (hapd->num_probereq_cb not getting cleared on deinit).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-09-07 20:53:23 +03:00
Jouni Malinen
ae3eacf771 tests: WPS ER learn OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:51:55 +03:00
Jouni Malinen
db9c88ebb5 tests: WPS ER SetSelectedRegistrar OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:27:14 +03:00
Jouni Malinen
fe67b94506 tests: WPS ER OOM in PutWLANResponse generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:11:41 +03:00
Jouni Malinen
3d105cdff6 tests: WPS ER OOM in STA add
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 17:04:57 +03:00
Jouni Malinen
18478107c2 tests: WPS ER and OOM in HTTP response generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:59:19 +03:00
Jouni Malinen
a302ee342c tests: Use sqlite3.Binary() with the log files
This is needed to avoid issues in some cases where 8-bit bytestrings may
be present in the otherwise text debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:53:23 +03:00
Jouni Malinen
eb95ced2d2 tests: WPS ER subscribe OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:38:38 +03:00
Jouni Malinen
d840350aca tests: WPS ER caching AP settings (OOM)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 16:31:38 +03:00
Jouni Malinen
7511ead0a7 tests: WPS against external implementation
This adds a Python-based minimal WSC protocol implementation to allow
more testing coverage to be reached for various error cases in protected
attributes. The wps_ext test case completes successful exchange in both
the Enrollee and Registrar roles acting in the middle of AP and STA. The
other test cases cover error cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 15:20:04 +03:00
Jouni Malinen
07536b18ce tests: WPS ER init failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 13:47:08 +03:00
Jouni Malinen
4c355e3ed1 tests: WPS AP configured for special ap_setup_locked=2 mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-07 13:42:30 +03:00
Jouni Malinen
d91a64c426 tests: WPS AP and UPnP event subscription and many events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-06 11:56:10 +03:00
Jouni Malinen
61c3d464e6 tests: Multiple WPS ERs adding a new enrollee using PIN
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-06 11:32:02 +03:00
Jouni Malinen
084780f1ca tests: D-Bus GroupFormationFailure signal
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 23:01:20 +03:00
Jouni Malinen
926404a6b2 tests: WPS config method update for WPS and P2P
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:58:18 +03:00
Jouni Malinen
8aab52461d tests: IBSS RSN OOM during wpa_init
This is a regression test for a segfault that was fixed in the previous
commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:35:58 +03:00
Jouni Malinen
2fca1f67cf tests: Secure mesh network setup failing due to wpa_init() OOM
This is a regression test for incorrect error path behavior that was
fixed in the previous commits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 21:31:25 +03:00
Jouni Malinen
5c92d474e6 tests: AP and STA tracking with passive scan
Verify that Public Action frame from a STA is used to add a tracking
entry.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 20:29:01 +03:00
Jouni Malinen
9425bb7828 tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:02 +03:00
Jouni Malinen
142f7ba643 tests: Dualband AP not replying to probes from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 19:11:00 +03:00
Jouni Malinen
c58b5f65b1 tests: Unconnected station tracking
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-05 17:30:28 +03:00
Jouni Malinen
d188367148 tests: WPS Enrollee protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
fbf6b71791 tests: AP configuration using wps_config and wps_cred_processing=2
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
ea982de1ee tests: WPS ER timing out STA entry after negotiation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-09-01 12:31:16 +03:00
Jouni Malinen
96038a5f85 tests: WPS AP and advertisement OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
476daa0585 tests: WPS UPnP SetSelectedRegistrar protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
31e56b953c tests: WPS ER Selected Registrar timeout
This extends ap_wps_pbc_timeout to cover another long WPS timeout:
ER-initiated SetSelectedRegistrar timeout on AP. Using the same test
case for this avoids the need for another 120 second test case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
24b7f2822e tests: More WPS/HTTP test coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-31 17:25:20 +03:00
Jouni Malinen
96ace55e6c tests: cfg80211 connect command to trigger roam
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-28 19:01:47 +03:00
Jouni Malinen
5a233fbdf0 tests: Regression test for D-Bus setting scan_freq and freq_list
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-28 00:20:30 +03:00
Jouni Malinen
6aaa661af1 tests: More WPS ER coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-26 21:09:37 +03:00
Jouni Malinen
2313e6c96b tests: BSS entry expiration when AP changes SSID
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-26 16:46:28 +03:00
Johannes Berg
c5e44b5917 tests: Catch RTNL assertions in the kernel check
Catch RTNL assertions made by ASSERT_RTNL() in the kernel message
checks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-24 19:28:12 +03:00
Jouni Malinen
f9dd43eac2 tests: EAP-TLS/TTLS/PEAP session resumption
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-24 19:28:12 +03:00
Jouni Malinen
4c3ae1c0d1 tests: More WPS ER HTTP protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-19 01:36:48 +03:00
Jouni Malinen
0dae8c9974 tests: Skip TLS OCSP stapling test cases with BoringSSL builds
BoringSSL removed the OpenSSL API used to implement OCSP stapling
support.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 20:21:44 +03:00
Jouni Malinen
5f2e454790 tests: Allow group 25 to fail in ap_wpa2_eap_pwd_groups with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full ap_wpa2_eap_pwd_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:52:38 +03:00
Jouni Malinen
db036ed53d tests: Use group 26 instead of 25 in sae_oom_wpas with BoringSSL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:46:56 +03:00
Jouni Malinen
a68d17929b tests: Allow group 25 to fail in sae_groups if running with BoringSSL
It looks like NID_X9_62_prime192v1 is not available, so allow that group
to fail without failing the full sae_groups test case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-18 19:43:23 +03:00
Jouni Malinen
c965ae034a tests: WPS ER protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
035efb2c43 tests: Trigger failure on exceptions in the dbus_p2p_autogo thread
This makes the test case more robust in reporting failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-17 00:18:32 +03:00
Jouni Malinen
df1d01cfed tests: WPS and non-WPS AP in single hostapd process
This is a regression test case for WPS_AP_PIN triggered hostapd segfault
when a non-WPS interface was enabled.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 23:14:44 +03:00
Jouni Malinen
a8fd08f7fc tests: Fix FST tests to remove hostapd instance
These test cases added a new radio for the non-FST AP and while they
removed the radio itself, they did not remove the hostapd instance for
that radio. Remove that to avoid leaving behind invalid instances.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 22:42:55 +03:00
Jouni Malinen
5c267d718d tests: Fix WPS HTTP test case exceptions
resp.status is an integer, not a string.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-16 21:26:01 +03:00
Jouni Malinen
6e9220160c tests: P2P group formation response during p2p_find
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-15 00:15:57 +03:00
Jouni Malinen
6b86872a7c tests: Control interface output buffer limit
This verifies wpa_supplicant behavior in number of cases where the
external program opening a control interface socket does not behave
properly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-14 21:21:00 +03:00
Jouni Malinen
76de2b6708 tests: Scan and TSF updates from Beacon/Probe Response frames
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-13 21:06:23 +03:00
Jouni Malinen
708ec753bc tests: ap_scan=2 AP mode operation and scan failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 21:48:55 +03:00
Jouni Malinen
6da3b745f1 tests: Try users2.pkcs12 twice to add coverage
This allows manual verification of extra PKCS#12 certificate processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-11 01:10:15 +03:00
Jouni Malinen
f59b946e39 tests: AP with open mode and wpa_supplicant ENABLE/DISABLE_NETWORK
ap_open_sta_enable_disable verifies that DISABLE_NETWORK that is issued
while connect/sme-connect radio work is pending is effective, i.e.,
prevents connection to disabled network.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-10 22:16:49 +03:00
Ilan Peer
7a2e562396 tests: Properly pass the num of channels to start.sh
The number of channels was not properly passed from the
run-all.sh script to the start.sh script. Fix it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-10 21:10:56 +03:00
Jouni Malinen
492f007ec5 tests: Various wpa_supplicant ctrl_iface OOM cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 23:52:43 +03:00
Jouni Malinen
5a145a55a1 tests: Verify FAIL-BUSY return on SCAN during gas_comeback_delay
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:52:29 +03:00
Jouni Malinen
ecafa0cf47 tests: RSN element protocol testing for STA side
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-08 20:04:07 +03:00
Jouni Malinen
e1eb0e9e6e tests: AP config using wps_config command with invalid passphrase
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Jouni Malinen
133716a722 tests: P2PS with group interface and intended iface addr in PD
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Max Stepanov
dbc21b1a81 tests: Add P2PS PD feature capability CPT tests
Add tests verifying a Coordination Protocol Transport exchange and
selection during P2PS provision discovery.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:25 +03:00
Andrei Otcheretianski
3c72383e03 tests: Re-factor PD and connection flows in P2PS tests
Reuse p2ps_provision() and p2ps_connect_pd() methods, and
remove the previous PD helper functions which are no longer used.

This fixes the previously "broken"
p2ps_connect_keypad_method_nonautoaccept and
p2ps_connect_display_method_nonautoaccept.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:47:19 +03:00
Andrei Otcheretianski
2f0f69a9ec tests: Use p2ps_provision() and p2ps_connect_pd() in p2ps_connect_p2ps_method()
Re-factor p2ps_connect_p2ps_method() so it reuses generic P2PS provision
and connection flows.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-08-06 20:45:15 +03:00
Ilan Peer
ab653ed2f6 tests: Add P2P GO frequency change policy tests
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:15:44 +03:00
Ilan Peer
48dd5e4da8 tests: Increase timeouts when MCC is enabled
When MCC is enabled, the remain of channel scheduling might
incur additional delays, so increase the timeouts to be able
to receive delays frames.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:24 +03:00
Ilan Peer
1977de368b tests: Skip some test cases when MCC is enabled
Some tests assume that only a single channel is used. Skip,
such tests/checks when MCC is enabled.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2015-08-04 19:03:21 +03:00
Jouni Malinen
6fad40df9e tests: Make dbus_p2p_group_termination_by_go more robust
Set peer_group_removed only if peer_group_added has already been set.
This fixes an issue where a propertiesChanged event triggered by an
earlier test case was able to get dbus_p2p_group_termination_by_go
terminated too early. This happened, e.g., with sequence
"dbus_p2p_two_groups dbus_p2p_group_termination_by_go".

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:52:10 +03:00
Jouni Malinen
5a21764994 tests: Avoid exception in dbus_p2p_two_groups
Only run peerJoined() steps once to avoid trying to use GetAll() on an
already removed group and double-removal of a group. This did not make
the test case fail, but the exception is printed out in pretty confusing
way to stdout, so better get rid of it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 18:44:53 +03:00
Jouni Malinen
0e7cde7619 tests: hostapd ctrl_iface LOG_LEVEL
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:54:31 +03:00
Jouni Malinen
47824e0dbc tests: Fix hostapd debug level
Remove the duplicated -ddKt command line argument to avoid setting
hostapd debug level to EXCESSIVE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-03 17:53:52 +03:00
Johannes Berg
3dfa519c32 tests: Work around iw scan getting stuck
On recent kernels, it seems that something changed (scheduler?)
that makes hwsim send the scan done event so quickly that iw isn't
scheduled back in to listen for it, causing iw to get stuck.

Work around this by using the scan trigger command (it'll be quick
enough so that we don't really need to wait) and the scan trigger
and dump commands where the results are required (and use a small
sleep there instead of waiting for the scan results.)

I'll try to fix this separately in iw later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-02 21:37:10 +03:00
Jouni Malinen
a0e117c684 tests: P2P extended listen timing operations
This verifies P2P extended listen timing operations by confirming that a
peer is not discoverable during the provisioning step and that the peer
becomes discoverable after having removed the group during such
provisioning step. The latter case was broken until the 'P2P: Cancel
group formation when deleting a group during group formation' commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:10 +03:00
Jouni Malinen
20fd8defa0 tests: D-Bus PropertiesChanged events on P2P Peer.Groups
Verify that Groups list for a P2P Peer gets updated properly on group
addition and removal (three different paths).

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 21:37:09 +03:00
Jouni Malinen
a2bc326e1e tests: Run Suite B test cases with OpenSSL 1.1.0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 17:11:47 +03:00
Jouni Malinen
a00b218651 tests: Skip ERP tests with EAP methods that are not supported
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
597516df79 tests: Skip LEAP tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
24072e17bc tests: Skip IEEE 802.1X dynamic WEP tests in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
a1eabc74b8 tests: Skip WPA(V1) test cases in FIPS mode
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
38934ed100 tests: Skip ap_wpa2_eap_psk_oom and ap_ft_oom in FIPS mode
omac1_aes_128() implementation within crypto_openssl.c is used in this
case and that cannot fail the memory allocation similarly to the
non-FIPS case and aes-omac1.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
06cdd1cd79 tests: Allow FIPS error case for openssl_cipher_suite_config_wpas
OpenSSL rejects the cipher string 'EXPORT' in FIPS mode in a way that
results in the locally generated error showing up before the EAP method
has been accepted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
0392867b6b tests: Skip EAP-pwd NTHash test in FIPS build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
c8e82c94da tests: Skip EAP-IKEV2 tests if not included in the build
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
e7ac04ceaf tests: Skip EAP-MD5 and EAP-MSCHAPV2 test cases in FIPS mode
These would require MD5 or MD4 which are not allowed in FIPS mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
ca158ea621 tests: Skip EAP-TTLS/CHAP, MSCHAP, MSCHAPV2 test cases in FIPS mode
In addition, replace some of the CHAP cases with PAP since that enables
more coverage without breaking the main test focus.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
d35b0227c1 tests: Use openssl pkcs12 -descert workaround to allow FIPS mode
The PKCS12 file with default openssl options cannot be used with OpenSSL
1.0.1 in FIPS mode. Replace this with -descert version as a workaround.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-02 16:52:56 +03:00
Jouni Malinen
b2a1f26259 tests: Set FIPSLD_CC=gcc (if not set) to make CONFIG_FIPS=y use easier
This makes it easier to build wpa_supplicant for OpenSSL FIPS mode
testing. wpa_supplicant/.config needs following type of configuration
for this:
CONFIG_FIPS=y
CFLAGS += -I/usr/local/ssl/include
LIBS += -L/usr/local/ssl/lib
CC=/usr/local/ssl/fips-2.0/bin/fipsld

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-08-01 16:57:04 +03:00
Jouni Malinen
72f460a27b tests: Support non-social oper channel in persistent_group_per_sta_psk
This allows driver-based preference list to override default operating
channel selection mechanism by using a non-social P2P find if needed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
191d8c4f78 tests: Make wifi_display enforce social channel as operating channel
Previously, this was assumed to be the case due to default channel
selection behavior. However, that may not be the case with driver-based
preference list processing. Enforce a social channel to be used as the
operating channel here since dev[2] uses social channel only device
discovery and needs to find the GO.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-31 15:24:45 +03:00
Jouni Malinen
9dd21d5183 tests: Allow local disconnect in openssl_cipher_suite_config_wpas
The openssl_ciphers="EXPORT" case may result in locally generated
disconnection event if the OpenSSL version used in the build rejects
export ciphers in default configuration (which is what OpenSSL 1.1.0
will likely do). Don't report a test case failure in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-28 21:00:18 +03:00
Jouni Malinen
d8aa603d53 tests: Skip fst_attach_wpas_error if no FST support
This check for FST testing support was forgotten from one of the new FST
test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-28 18:56:33 +03:00
Max Stepanov
aff4b2c139 tests: Add CPT parameters to p2ps_provision()
Add adv_cpt and seeker_cpt parameters to p2ps_provision() function.
The seeker_cpt is used in P2P_ASP_PROVISION command by a seeker, the
adv_cpt parameter is in P2P_ASP_PROVISION_RESP by an advertiser.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
5e9d05115f tests: Add CPT parameter to p2ps_advertise()
Add an optional parameter to p2ps_advertise() function allowing to
specify CPT priority values.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:20 +03:00
Max Stepanov
c1e31bdb7f tests: Add CPT parameter to WpaSupplicant asp_provision()
Add an optional CPT parameter to asp_provision() method of
WpaSupplicant.

Signed-off-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-27 00:47:19 +03:00
Andrei Otcheretianski
e999e56c2c tests: Add p2ps_connect_pd() method
Add p2ps_connect_pd() helper method which strictly validates the PD
results and establishes the connection between peers accordingly.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
4796021088 tests: Add p2ps_provision() method
Add generic provision method. This method receives a seeker and an
advertiser devices, advertisement id, method, and a flag which indicates
whether deferred flow is expected. The method returns P2PS-PROV-DONE
events and the pin (if keypad or display method is used).

This method is needed to simplify the P2PS provision flows in the tests.
This method complies to the P2PS specification regarding the expected
order of the show and display PIN events.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Andrei Otcheretianski
1a1b015622 tests: Add asp_provision method to wpa_supplicant
Add asp_provision method which issues either P2PS PD Request or, if the
status is provided, continues the deferred flow by sending follow on
PD Request.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Max Stepanov <Max.Stepanov@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-26 21:45:35 +03:00
Jouni Malinen
f751368ec3 tests: Make discovery_auto more robust
This test case could fail if there were old BSS entries remaining in
cfg80211 scan results. That happened, e.g., when running test cases in
the following sequence: "discovery_social_plus_one discovery_auto".

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
898b33095e tests: FST SESSION_INITIATE and SESSION_RESPOND error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:14 +03:00
Jouni Malinen
78ca254237 tests: More FST GET_PEER_MBIES coverage
The case of valid but unknown peer address was not covered previously.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
54b227a1ff tests: Use a shared FST setup function
This removes quite a bit of duplicated code. In addition, this starts
using different FST group names to get additional coverage.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:45:13 +03:00
Jouni Malinen
1f9427c9cd tests: Explicitly close hostapd global control socket on RELOG
Without this, the run-tests.py socket could have been left in attached
to receive all hostapd global events during a test case. This could hit
the limit of pending messages on the socket since there is nothing
clearing this socket during the execution of a test case. Fix this by
explicitly closing the socket after having completed the RELOG command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
5994658309 tests: FST attach errors in wpa_supplicant
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
6e2536fc79 tests: FST Setup Request processing and OOM during MBIE update
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
2fffbd4db8 tests: FST setup multiple times
This verifies FST group dialog_token wrap-around and behavior with large
number of session setups and teardowns.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:09 +03:00
Jouni Malinen
3aa1ca9aec tests: Additional FST Setup test coverage
This adds a test case that goes through session initialization through
separate commands that can be modified more easily for special case. The
first such special case is using special FST Setup Request frames with
non-standard MBIE contents to hit different code paths for finding the
interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
9162eed42b tests: Extend fst_ap_ctrl_iface to support existing groups
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 18:12:08 +03:00
Jouni Malinen
6c247100e8 tests: FST protocol tests to verify invalid STIE header
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-26 11:22:21 +03:00
Jouni Malinen
8936b095ea tests: Fix ap_wps_wpa_cli_action outside VM
Pass absolute path to the daemonized wpa_cli process and add read
privileges for everyone on the action script to make this test case work
better when run without a VM.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 20:48:33 +03:00
Jouni Malinen
569f8f9b87 tests: eloop socket re-open from timeout/socket handler
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-23 18:39:02 +03:00
Jouni Malinen
2602a2ff9e tests: WPS events and wpa_cli action script
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-22 17:12:07 +03:00
Anton Nayshtut
4be0dd2232 tests: hostapd DUP_NETWORK
This test checks the functionality of DUP_NETWORK global control
inteface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-21 13:56:19 +03:00
Jouni Malinen
7b7e8a2ee7 tests: Use codecov build hostapd/wpa_supplicant in FST tests
Try to use the special build for --codecov purposes, if present, instead
of hardcoding the hostapd/wpa_supplicant binary to the default location.
This is needed to collect code coverage correctly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:10:55 +03:00
Jouni Malinen
ccfe3e5db9 tests: wpa_supplicant ctrl_iface network OOM in string parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
523061996c tests: wpa_supplicant control interface wait for client
This test case is also adding code coverage for process daemonizing and
Linux tracing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 23:07:04 +03:00
Jouni Malinen
5b0afb0a29 tests: UUID parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 22:04:50 +03:00
Jouni Malinen
bd4b9ee5ca tests: NFC connection handover to form a new P2P group and IP pool OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 17:28:44 +03:00
Jouni Malinen
ccf4d7644a tests: WPS ER OOM in XML processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:44:51 +03:00
Jouni Malinen
2c3a019083 tests: Initial AP configuration and OOM during PSK generation
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-19 16:31:12 +03:00
Jouni Malinen
3b765ea545 tests: FST-MANAGER TEST_REQUEST error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:29:39 +03:00
Jouni Malinen
7ba240b90f tests: FST protocol testing for Ack Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:08:06 +03:00
Jouni Malinen
ca73f7d2d0 tests: FST protocol testing for Setup Response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:06:31 +03:00
Jouni Malinen
6b294e57a5 tests: Speed up fst_proto by waiting for MGMT-TX-STATUS event
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 19:05:31 +03:00
Jouni Malinen
4390030a51 tests: FST-MANAGER TEST_REQUEST GET_FSTS_ID and ID not found
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
e84297a8e6 tests: FST-MANAGER SESSION_RESPOND failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
feb64551d9 tests: FST-MANAGER SESSION_ADD OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
f067a05589 tests: FST-MANAGER SESSION_SET parameter parsing error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 17:23:55 +03:00
Jouni Malinen
a248e29dac tests: FST-ATTACH OOM in fst_iface_create()
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:13:20 +03:00
Jouni Malinen
3da112c5af tests: Use direct fst_test_common access
There is no need to go through fst_module_aux to reach fst_test_common
since both of these get imported here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:02:46 +03:00
Jouni Malinen
febd7a4c40 tests: FST attach with llt=0
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-18 11:01:44 +03:00
Jouni Malinen
742408afa8 tests: Verify wpa parameter in hostapd GET_CONFIG
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:20:23 +03:00
Jouni Malinen
b6387212f5 tests: Add coverage for new vht_capab values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-18 00:00:20 +03:00
Jouni Malinen
087632168b tests: Add hostapd interface with driver specified
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 23:57:04 +03:00
Jouni Malinen
f752fd9264 tests: FST session create OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
19a0602d86 tests: FST send action OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
d99ed42a15 tests: FST AP configuration and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
5e2ad41da3 tests: FST protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 19:14:15 +03:00
Jouni Malinen
6f3815c0da tests: WPA2-PSK-FT RRB protocol testing
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-17 11:16:15 +03:00
Anton Nayshtut
6f7b96145f tests: hostapd global-to-local control interface redirection
This implements basic global-to-local control interface command
redirection tests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 20:23:26 +03:00
Jouni Malinen
2531dc9f6b tests: wpa_supplicant ctrl_iface DUP_NETWORK (global)
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
c0183847d9 tests: Silence unnecessary get_driver_status() prints
Commit 53606b105c ('tests: Wait for scan
to complete on all interfaces in reset()') added option of passing
ifname to get_driver_status(). This could result in FAIL-NO-IFNAME-MATCH
returns that get printed out in "Ignore unexpected status-driver line"
messages if the interface is not found. Check for this case to avoid
that unnecessary print.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
85eb89fe56 tests: FST with RSN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
86ba832cf2 tests: FST AP setup failing due to OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
d6d549c47c tests: FST control interface behavior
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Anton Nayshtut
41a256ecd9 tests: Add FST module tests
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-07-16 18:26:16 +03:00
Jouni Malinen
dca95e6924 tests: Invalid P2PS attribute parsing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-13 00:51:15 +03:00
Jouni Malinen
2496adf046 tests: IEEE 802.1X and EAPOL Authenticator aWhile handling
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:45:16 +03:00
Jouni Malinen
b7bdfb68f2 tests: IEEE 802.1X and EAPOL_SET command
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:18 +03:00
Jouni Malinen
a32a6d2ca2 tests: IEEE 802.1X and EAPOL_REAUTH request
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 11:34:16 +03:00
Jouni Malinen
778325501b tests: More coverage for EAPOL Authenticator state dump
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-12 00:20:44 +03:00
Nishant Chaprana
bcc332e760 tests: Fix resource leak in test-rsa-sig-ver on error paths
The opened FILE pointer needs to be closed on error paths.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2015-07-10 21:10:24 +03:00
Jouni Malinen
6c4b5da46d tests: EAP-TLS and TLS version configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 19:52:14 +03:00
Andrei Otcheretianski
1ee6dd2671 tests: Few trivial cleanups to P2PS tests
Remove unused variables and replace split(" ") with just split().

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Andrei Otcheretianski
53606b105c tests: Wait for scan to complete on all interfaces in reset()
When WpaSupplicant executes reset() it waits until all the ongoing scans
are completed. However, it checks the status of the wlanX interface
only. If a dedicated P2P device interface is used, scan may be still
running on the P2P Device interface, e.g., due to P2P_FIND. This might
affect subsequent tests.

Fix this by waiting until the scan is done both on wlanX and P2P
Device interfaces.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
2015-07-08 16:52:42 +03:00
Jouni Malinen
ba53a8a009 tests: Additional invalid NDEF records
These are regression tests for NDEF message parsing issues with payload
length validation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-08 16:52:42 +03:00
Jouni Malinen
e0236b152c tests: IEEE 802.1X and HELD state
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 19:25:31 +03:00
Jouni Malinen
1f560ff08f tests: Add Undefined Behavior Sanitizer (ubsan) configuration
This allows hostapd and wpa_supplicant to be built for hwsim test cases
with ubsan functinality from the recent gcc/clang compiler versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 18:23:04 +03:00
Jouni Malinen
34d3eaa8ee tests: WPA2-PSK-FT AP over DS protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
cf671d54bd tests: WPA2-PSK-FT and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
7b741a5383 tests: WPA2-PSK-FT AP with GCMP-256 cipher
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
348bc4e0eb tests: IEEE 802.1X connection and EAPOL-Key protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
2ff4928967 tests: IEEE 802.1X and EAPOL-Start retransmissions
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-07 16:25:06 +03:00
Jouni Malinen
85774b70a1 tests: EAP server and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-01 00:42:09 +03:00
Jouni Malinen
405c621cdb tests: WPA2-Enterprise connection using MAC ACL
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-07-01 00:34:27 +03:00
Jouni Malinen
df7ad0fa11 tests: EAP-TLS and unknown OCSP signer
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 22:05:37 +03:00
Jouni Malinen
d2a1047e67 tests: Invalid OCSP data (parsing failure)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 22:01:05 +03:00
Jouni Malinen
7be5ec991d tests: Invalid openssl_ciphers value
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 21:55:59 +03:00
Jouni Malinen
6eddd5303c tests: EAP-FAST/MSCHAPv2 and server OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-30 21:36:12 +03:00
Jouni Malinen
b3ff3decf6 tests: DH parameter file DSA conversion and error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
0c83ae0469 tests: EAP-TLS with PKCS12 that includes additional certificates
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
b1fb42751a tests: EAP-TLS and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00
Jouni Malinen
b197a8194b tests: EAP-TLS and server checking CRL
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-06-29 23:23:56 +03:00