Commit graph

7489 commits

Author SHA1 Message Date
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
4a6cc86272 Add data test functionality
It is now possible to run hwsim_test like data connectivity test through
wpa_supplicant/hostapd control interface if CONFIG_TESTING_OPTIONS=y is
used for the build. Test functionality is enabled/disabled at runtime
with "DATA_TEST_CONFIG <1/0>". The "DATA_TEST_TX <dst> <src> <tos>"
command can be used to request a test frame to be transmitted.
"DATA-TEST-RX <dst> <src>" event is generated when the test frame is
received.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 20:51:45 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Luciano Coelho
5d7746b589 tests: Add test cases for AP channel switch announcement
Signed-hostap: Luciano Coelho <luciano.coelho@intel.com>

Skip CSA tests if the driver doesn't support this in AP mode.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 16:04:31 +03:00
Andrei Otcheretianski
d66873f5cf Do not start CSA flow when CSA is not supported by the driver
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 15:39:59 +03:00
Jouni Malinen
2d6ee86f9b HS 2.0R2: Write OSEN key_mgmt value to config file
This was forgotten when the parser for key_mgmt=OSEN was added.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 12:58:13 +03:00
Thomas Pedersen
d3fd563f46 Write SAE and FT-SAE key_mgmt to config
This was forgotten when the key_mgmt parser for SAE and FT-SAE was
added.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-10-19 12:58:13 +03:00
Bob Copeland
a52024c976 nl80211: Add new peer candidate event for mesh
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
7e31703e4d nl80211: Add support for sta_add flags_mask
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
24bd4e0be5 nl80211: Add driver flag to indicate mesh support
Convert the driver flags variable to u64 since there was no room for
more flags.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Jouni Malinen
a709c5e29f Add a test vector for AES-SIV
This verifies that the AES-SIV implementation results matches RFC 5297
test vector A.1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 12:43:40 +03:00
Bob Copeland
f7072600be Implement RFC 5297 AES-SIV
Add an implementation of Synthetic Initialization Vector (SIV)
Authenticated Encryption Using the Advanced Encryption Standard (AES).

This mode of AES is used to protect peering frames when using
the authenticated mesh peering exchange.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:43:38 +03:00
Bob Copeland
6293f9ed07 mesh: Parse mesh-related information elements
Add support for parsing mesh id, mesh config, mesh peering,
AMPE and MIC information elements.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 11:20:05 +03:00
Thomas Pedersen
3e7b032f83 mesh: Add mesh protocol definitions
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-hostap: Thomas Pedersen <thomas@noack.us>
2014-10-19 11:20:05 +03:00
Jouni Malinen
71c41d45af tests: Provide more details of parallel testing with curses UI
This extends parallel-vm.py to show more details about testing progress
from each VM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 11:19:49 +03:00
Jouni Malinen
9c2d2378ba tests: P2P re-invocation with p2p_add_cli_chan=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 17:00:57 +03:00
Mikael Kanstrup
a0a5f73e62 P2P: Include passive channels in invitation response
Patch 51e9f22809 added the option
p2p_add_cli_chan to allow P2P GC to connect on passive channels
assuming the GO should know whether allowed to send on these channels.
This patch adds missing cli_channels to invitation response messages
to allow re-connecting to a persistent group as GC on passive
channels.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2014-10-18 17:00:57 +03:00
Toby Gray
fd1776536b tests: Removing a P2P group via the group control interface
This adds a test which attempts to use the control interface for the
P2P group to remove the P2P group.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-18 16:22:25 +03:00
Jouni Malinen
f2b3acc9d7 P2P: Fix group interface removal through interface ctrl_iface
It was possible to issue the P2P_GROUP_REMOVE command through the
per-interface control interface. This resulted in freed memory getting
accessed when trying to send the control interface response to the
operation that ended up deleting the group interface. Fix this by
postponing the removal operation until the caller has returned.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 16:22:25 +03:00
Jouni Malinen
19d3a6e364 tests: SAE PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:03:17 +03:00
Jouni Malinen
bc26ac50dd SAE: Add support for PMKSA caching on the station side
This makes wpa_supplicant SME create PMKSA cache entries from SAE
authentication and try to use PMKSA caching if an entry is found for the
AP. If the AP rejects the attempt, fall back to SAE authentication is
used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:02:02 +03:00
Jouni Malinen
f299117093 SAE: Add support for PMKSA caching on the AP side
This makes hostapd create PMKSA cache entries from SAE authentication
and allow PMKSA caching to be used with the SAE AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:00:29 +03:00
Jouni Malinen
fcc306e3cc Add Acct-Multi-Session-Id into RADIUS Accounting messages
This allows multiple sessions using the same PMKSA cache entry to be
combined more easily at the server side. Acct-Session-Id is still a
unique identifier for each association, while Acct-Multi-Session-Id will
maintain its value for all associations that use the same PMKSA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 10:38:17 +03:00
Jouni Malinen
aff039fada Remove duplicated Acct-Session-Id from Accounting-Request
Commit 8b24861154 ('Add Acct-Session-Id
into Access-Request messages') added Acct-Session-Id building into the
helper function shared between authentication and accounting messages.
However, it forgot to remove the same code from the generation of
accounting messages and as such, ended up with Accounting-Request
messages containing two copies of this attribute. Fix this by removing
the addition of this attribute from the accounting specific function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 10:35:33 +03:00
Jouni Malinen
414236b5db tests: RADIUS accounting with PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 10:20:07 +03:00
Jouni Malinen
0ffe7a5481 RADIUS: Define new attributes from RFC 5580
This adds definition and names for the RADIUS attributes defined in RFC
5580 (Carrying Location Objects in RADIUS and Diameter).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 09:30:35 +03:00
Justin Shen
3f7ac05878 WPS: Extend startWhen to 2 if peer AP supports WPS 2.0
Increase EAPOL startWhen to 2 for the case where the AP/GO has
advertised it supports WPS 2.0. This is done to make it less likely for
the EAPOL-Start frame to be sent out since that is only required for WPS
1.0. Not sending it can remove one unnecessary round trip from the EAP
exchange when the AP is going to start with EAP-Request/Identity
immediately based on the Association Request frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-13 12:24:17 +03:00
Jouni Malinen
a87e123a96 tests: Add Python-version of parallel-vm.sh
This is a more advanced version of the simple parallel-vm.sh script.
Status of each VM is printed out during the test and results are
provided in more convenient format in the end.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 21:49:36 +03:00
Jouni Malinen
54a800dd51 netlink: Fix RTM_SETLINK padding at the end of the message
While the kernel seems to have accepted the message to set linkmode and
operstate without the final attribute getting padded to 32-bit length,
it is better to get this cleaned up to match expected format. The double
NLMSG_ALIGN() followed by RTA_LENGTH() did not make much sense here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 19:27:16 +03:00
Cedric Baudelet
a6938b79b4 hostapd_cli: Add CLI commands enable, reload, and disable
Commands are already present in ctrl_iface.c (and parsed in
hostapd_ctrl_iface_receive() function) but not in hostapd_cli.c. This
patch updates hostapd_cli.c with matching functions.

Signed-off-by: Cedric Baudelet <cedric.baudelet@intel.com>
2014-10-12 19:27:13 +03:00
Eduardo Abinader
a62941415a P2P: Remove unreachable code in wpas_p2p_stop_find()
Commit 152cff6ba6 ('P2P: Remove
WPA_DRIVER_FLAGS_P2P_MGMT option') removed the only non-zero return from
wpas_p2p_stop_find_oper(), but did not remove the useless return value
or the return check in wpas_p2p_stop_find(). Clean these up by removing
unreachable code and useless return value.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-10-12 18:34:25 +03:00
Jouni Malinen
3f08d1cde8 tests: WPS PBC triggered based on hostapd event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:58:04 +03:00
Jouni Malinen
2d4e9c2eb8 Include ieee802_11_common.c in wpa_supplicant build unconditionally
This is needed for number of items and it was possible to make a build
configuration that did not include ieee802_11_common.c while still
trying to use functions from there. While it would be possible to add
NEED_80211_COMMON=y to all the cases where this file is needed, the
extra complexity from this is not really justifiable anymore, so include
the file unconditionally.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:03:25 +03:00
Jouni Malinen
3eafc494d8 Fix CONFIG_NO_SCAN_PROCESSING=y build
ht_supported() was used but not defined in such a case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 17:02:23 +03:00
Jouni Malinen
cd3153a983 Fix build without IEEE8021X_EAPOL
The MACsec addition placed one of the calls outside the #ifdef
IEEE802X_EAPOL block while the variable needed for this was defined only
within the block.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:56:23 +03:00
Toby Gray
3cea004d3c Make wpa_ctrl_get_remote_ifname declaration conditional.
The definition of wpa_ctrl_get_remote_ifname is conditional on
CONFIG_CTRL_IFACE_UDP. This change makes the header declaration of
this function also conditional on the same define.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-12 16:51:02 +03:00
Toby Gray
f5c649b769 Fix warning about unused parameter if CONFIG_DEBUG_FILE is not defined.
This change adds a cast to void to indicate that the path parameter is
unused when CONFIG_DEBUG_FILE is not defined. This fixes a compiler
warning about unused parameters.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-12 16:49:12 +03:00
Jouni Malinen
6503deb9ac tests: Wi-Fi Display element updates and P2P-DEVICE-FOUND
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:46:24 +03:00
Jouni Malinen
34d45ea0b6 P2P: Add new=0/1 flag to P2P-DEVICE-FOUND events
This information can be used to determine whether the event is generated
for a new peer that was added or due to an update in the information for
an existing peer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 16:45:33 +03:00
Jean Trivelly
4b32f6a5ec P2P: Inform upper layer when WFD-IE field of a P2P device has changed
When WFD IE of a P2P device changes, the field is locally updated in P2P
supplicant but upper layer is not informed about this change.

Signed-off-by: Jean Trivelly <jean.trivelly@intel.com>
2014-10-12 16:34:24 +03:00
Jouni Malinen
0a5787162a tests: Make ap_hs20_fetch_osu more robust under heavy load
Use scan_for_bss() instead of scan() to avoid errors if the active scan
fails, e.g., due to heavy load under parallel-vm.sh test run.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 12:38:18 +03:00
Jouni Malinen
89f20842f6 tests: OpenSSL cipherlist configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:59:04 +03:00
Jouni Malinen
07e2de3193 wpa_supplicant: Allow OpenSSL cipherlist string to be configured
The new openssl_cipher configuration parameter can be used to select
which TLS cipher suites are enabled for TLS-based EAP methods when
OpenSSL is used as the TLS library. This parameter can be used both as a
global parameter to set the default for all network blocks and as a
network block parameter to override the default for each network
profile.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:55:13 +03:00
Jouni Malinen
f8995f8f1c hostapd: Allow OpenSSL cipherlist string to be configured
The new openssl_cipher configuration parameter can be used to select
which TLS cipher suites are enabled when hostapd is used as an EAP
server with OpenSSL as the TLS library.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:52:05 +03:00
Jouni Malinen
b7328434f7 OpenSSL: Add a mechanism to configure cipher suites
This extends the TLS wrapper code to allow OpenSSL cipherlist string to
be configured. In addition, the default value is now set to
DEFAULT:!EXP:!LOW to ensure cipher suites with low and export encryption
algoriths (40-64 bit keys) do not get enabled in default configuration
regardless of how OpenSSL build was configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-12 11:45:21 +03:00
Jouni Malinen
e3a451118e eapol_test: Check inet_aton() result
This makes code more consistent (CID 72676).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:45:17 +03:00
Jouni Malinen
7c0e5b58f9 DFS: Check os_get_random() result
This use does not really need a strong random number, so fall back to
os_random() if a theoretical error case occurs. (CID 72682)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:43:36 +03:00
Jouni Malinen
24661bbadc AP: Check os_get_random() return value more consistently
While this specific case does not really care what value is used, the
the theoretical error case can be handled more consistently. (CID 72684)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-11 19:43:36 +03:00