Commit graph

892 commits

Author SHA1 Message Date
Jouni Malinen
6c080dfab2 tests: EAP-SIM/AKA/AKA' protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 20:34:25 +03:00
Jouni Malinen
72cbc6847b tests: EAP-SIM external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 19:43:11 +03:00
Jouni Malinen
d8e02214ea tests: EAP-AKA external_sim error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-21 11:30:57 +03:00
Jouni Malinen
32747a3eee tests: EAP-SIM/AKA invalid Milenage key configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-20 10:59:08 +03:00
Jouni Malinen
e4719179cb tests: SA Query rate limiting on burst of unprotected Deauth
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-19 20:59:46 +03:00
Jouni Malinen
e0534ecf90 tests: EAP-PSK protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-18 00:13:56 +03:00
Jouni Malinen
7eb33a8f99 tests: Make concurrent_grpform_while_connecting2 more robust
It was possible for this test case to fail due to PBC overlap that was
detected based on previous test case having used PBC. Make that false
positive less likely to happen by explicitly clearing the scan cache on
dev[1].

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-16 17:07:25 +03:00
Jouni Malinen
2eae05f780 tests: EAP protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 19:01:59 +03:00
Jouni Malinen
0954431621 tests: EAP-PAX protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-15 17:36:53 +03:00
Avraham Stern
62fbc0a784 tests: GO configured preferred channels are disallowed
Verify that when all configured preferred channels are disallowed,
the GO is instantiated on a random channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-15 00:46:15 +03:00
Avraham Stern
eb383fc48e tests: Autonomous GO random channel selection
Verify that a standalone GO selects a random channel from the social
channels in case no other preference is set.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
8d74469e61 tests: P2P GO negotiation when two peers force different freq
Verify that when trying to form a P2P group but each peer forces a
different frequency, the group formation fails.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
744a214bdb tests: Frequency set as no GO
Verify that when setting frequency as no_go_freq and setting up
autonomous GO, the GO is instantiated on a different frequency, but
when forming a P2P group and becoming a client this frequency can be
used.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
87e5dd0af1 tests: GO with preferred channel and station on a disallowed channel
Verify that when setting up autonomous GO with configured preferred
channel and a station interface is connected on a channel that is
disallowed for P2P, the GO is instantiated on the preferred channel.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:33 +03:00
Avraham Stern
b1f0cd8b4c tests: Autonomous GO with preferred channel and station on another channel
Verify that when setting up an autonomous GO with configured preferred
channel and a station interface is on another channel, the GO is
instantiated on the same channel as the station interface and not on the
configured preferred channel.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:32 +03:00
Avraham Stern
72f659238c tests: GO negotiation with forced freq different than station interface
Verify that when a station interface is on one frequency, and GO
negotiation is started in which both sides force a different frequency,
the P2P group is formed on the forced frequency (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:12:09 +03:00
Haim Dreyfuss
031220832b tests: Autonomous GO force different channel than station interface
After station interface is connected on a specific channel, create
autonomous GO with forced different channel.

Requires MCC.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:08:54 +03:00
Avraham Stern
23aec8ffd6 tests: GO negotiation with station interface on a P2P-disallowed channel
Verify that when P2P group is formed and a station interface is
connected on a channel that is disallowed for P2P, the group is formed
on a different channel than the BSS (both as GO and client).

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:08:53 +03:00
Avraham Stern
4b47d977c5 tests: GO with station interface on a P2P-disallowed channel
Verify that when setting up an autonomous GO and station interface is
connected on a channel that is disallowed for P2P uses, the GO is
instantiated on a different channel than the station mode connection.

Requires MCC.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:05:17 +03:00
Avraham Stern
9c69efc144 tests: GO negotiation with station interface is connected
Verify that when station interface is connected and GO negotiation is
initiated, the P2P group is formed on the same channel as the station
connection.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2014-06-14 23:04:41 +03:00
Haim Dreyfuss
ef59926999 tests: Autonomous GO channel selection following BSS
This test verifies that if a GO is instantiated after a connection of a
station interface, the chosen operating channel is that of the station
interface.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 23:04:08 +03:00
Haim Dreyfuss
5fe7a42601 tests: Add wpasupplicant get_mcc helper function
The function returns the number of concurrent channels supported by the
driver.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:49:17 +03:00
Haim Dreyfuss
57d909eeff tests: Add channels argument to run-all.sh and start.sh
Add an option to run-all.sh and start.sh to get as an argument the
number of concurrent channels that mac80211_hwsim will be loaded with.
To start mac80211_hwsim with more than one channel, the following
parameter should be added to command line: channels=<num_channels>
The default is one channel (no concurrent channels).
The driver should be loaded with multi channel support in order to run
some tests.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
2014-06-14 19:47:51 +03:00
Jouni Malinen
30d62b7a88 tests: EAP-EKE protocol test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-14 17:27:12 +03:00
Jouni Malinen
e862968d18 tests: Validate parsing and rejection of invalid WFD subelement
This is a regression test for wifi_display_subelem_hex() bounds checking
issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 15:29:48 +03:00
Jouni Malinen
6ec64f3ec8 tests: Truncated GAS query request
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-13 00:27:15 +03:00
Jouni Malinen
2e9f8ee723 tests: EAP-GPSK protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-12 01:00:56 +03:00
Jouni Malinen
d5c14b25fd tests: EAP-OTP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 21:23:54 +03:00
Jouni Malinen
43c5bc94f5 tests: cfg80211 offchannel TX vs. operating channel
This test case shows an example case where an uncancelled offchannel TX
frame command seems to end up getting following CMD_FRAME TX operations
transmitting on incorrect channel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 11:48:02 +03:00
Jouni Malinen
8604a68eec tests: EAP-MD5 protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 00:54:45 +03:00
Jouni Malinen
18fc8f40fd tests: EAP-LEAP protocol tests
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-11 00:46:38 +03:00
Jouni Malinen
d81731e681 tests: Framework for EAP peer protocol tests
This introduces a minimal RADIUS authentication server using pyrad to
allow simple EAP handler functions to be used for writing protocol tests
for EAP peer methods. This initial commit includes test cases for
EAP-SAKE.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-09 00:30:44 +03:00
Jouni Malinen
a47f815ff3 tests: Extend RADIUS protocol testing coverage
Test RADIUS client behavior with various invalid Access-Accept messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-08 18:17:08 +03:00
Jouni Malinen
9a921f9a84 tests: Verify behavior on unexpected association event
This verifies association event processing in case the association was
not requested by wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-07 13:35:03 +03:00
Jouni Malinen
b246e2af79 tests: Non-ASCII EAP user identity
This is a regression test for printf_encode() bounds checking issues
that can now be caught under valgrind.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 17:36:51 +03:00
Jouni Malinen
a7fb2f2f4f tests: Run hostapd-AS under valgrind if requested
Previously, only hostapd-AP and wpa_supplicant processed were run under
valgrind when valgrind testing was enabled. Extend this to include
hostapd as authentication server.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-06-02 16:20:08 +03:00
Jouni Malinen
cf2f369818 tests: cfg80211 scan-for-auth workaround
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-02 00:26:23 +03:00
Jouni Malinen
5186e0c450 tests: nl80211 connect command and AP disconnecting the STA
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 23:20:36 +03:00
Jouni Malinen
40bda3805d tests: nl80211 connect command and association reject event
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 23:03:14 +03:00
Jouni Malinen
e6485ba764 tests: Remove CONFIG_DRIVER_TEST=y from example config
This was still present in hostapd example configuration even though the
test driver wrapper is not used anywhere in the hwsim testing and there
are no plans of using it either.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 22:47:44 +03:00
Jouni Malinen
2d6ce4327a tests: rfkill test cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 16:17:33 +03:00
Jouni Malinen
40602101de tests: FT roams multiple times
This extends testing coverage by running FT-over-air and FT-over-DS
tests for hundred roams.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 15:48:48 +03:00
Jouni Malinen
c6b6e10578 tests: FT and GTK rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 13:22:24 +03:00
Jouni Malinen
3b25ad4cd6 tests: GTK rekeying
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 11:59:23 +03:00
Jouni Malinen
6c87b4b84e tests: PTK rekey enforced by AP
These are similar to the existing test cases where PTK rekey was
triggered by the station, but here a timer on the AP is used as the
trigger.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 11:47:37 +03:00
Jouni Malinen
8f614cd7a7 tests: Initial mechanism for RADIUS protocol testing
This brings in a minimal pyrad-based RADIUS server to allow various
protocol tests to be run. For now, the server is not adding
Message-Authenticator, so that error case is checked. Additional tests
can be added in the future.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 00:52:03 +03:00
Jouni Malinen
8b5f1095ce tests: RADIUS interim accounting with unreachable server
This adds coverage for radius_client_list_del() loop that deletes
pending messages related to the specific STA.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-06-01 00:02:15 +03:00
Jouni Malinen
de93da914f tests: Verify double DISABLE on hostapd with multi-BSS configuration
This used to result in a segmentation fault due to use of freed memory
(mismatch in pointer lifetime between hostapd.c and driver_nl80211.c).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 17:16:33 +03:00
Jouni Malinen
bedb6ea54f tests: Verify auto_interworking=1 with partiall matching network
This is a regression test for an issue where scanning sequence could be
terminated if interworking_find_network_match() finds a matching
network, but wpa_s->auto_select is not set. This could stop connection
attempts when auto_interworking=1 is used and the scan results have a
partially matching network and no cred match.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 13:25:12 +03:00
Jouni Malinen
0aee8330bd tests: RADIUS server failover
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-31 12:43:37 +03:00
Jouni Malinen
6a188ba3fc tests: RADIUS server unreachable with error handling
radius_{auth,acct}_unreachable tested some parts of RADIUS client code
error handling. However, they did not test everything since the send()
calls for unreachable port on localhost did not return an error (that
error was reported on receive side). Extend this with similar test cases
using unreachable IP address to get send() error returns covered as
well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 18:34:39 +03:00
Jouni Malinen
e707f9aac7 tests: P2P Client inviting a device to join a group
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 16:59:51 +03:00
Jouni Malinen
95cf24abcd tests: More protocol testing coverage for P2P invitation messages
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 16:46:59 +03:00
Jouni Malinen
9e669cb5ff tests: Hide stdout from Popen() to avoid undesired stdout prints
ap_cipher_tkip_countermeasures_{ap,sta} printed out the MAC addresses in
stdout which resulted in the debug log not starting the PASS/FAIL
information at the beginning of the line. Hide these unnecessary prints
to avoid that.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:18 +03:00
Jouni Malinen
c50f0eac11 tests: P2P Invitation Response protocol tests
This verifies most of the error cases in Invitation Response processing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
2f3b5fff15 tests: Invitation request with mismatching channel requirements
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
b1809dab7e tests: P2P invitation rejected from unknown peer
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
cdad30be2a tests: P2P invitation with Wi-Fi Display enabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-29 15:37:17 +03:00
Jouni Malinen
350a7ba90f tests: HS 2.0 remediation required from SQL user DB
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-28 00:56:13 +03:00
Jouni Malinen
5e5818458f tests: Persistent group invitation while GO already running
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:01 +03:00
Jouni Malinen
84d746c8dd tests: P2P persistent group during concurrent operation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
2d68cfaaec tests: Persistent P2P group re-invocation without persistent reconnect
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-27 13:53:00 +03:00
Jouni Malinen
aa9735e772 tests: P2P and driver event to avoid frequencies
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:44 +03:00
Jouni Malinen
de8c4144fa tests: No pending query for GAS comeback
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
1d1de2306d tests: Limit on number of GAS pending dialog contexts
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
745f87715e tests: Verify SQLite DB as hostapd EAP user database
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-26 17:21:43 +03:00
Jouni Malinen
e044016422 tests: gitignore TNC library files
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-21 18:47:57 +03:00
Jouni Malinen
3ba5cb29af tests: Add -rdynamic to fix TNC IMV/IMC loading on some platforms
The example IMV and IMC used for TNC testing has references to
wpa_printf and other functions from hostapd/wpa_supplicant. Link the
binaries in a way that allows these symbols to be resolved while loading
the libraries at run time.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-21 14:56:34 +03:00
Jouni Malinen
c4d370117b tests: EAP-PEAP parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-18 00:44:39 +03:00
Jouni Malinen
ea6464b07f tests: EAP-PEAP crypto_binding=0/1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-18 00:33:59 +03:00
Jouni Malinen
873e7c297c tests: EAP-FAST using PAC file
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-18 00:28:31 +03:00
Jouni Malinen
8583d66478 tests: EAP-AKA' and EAP-AKA both enabled (bidding mechanism)
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-18 00:04:18 +03:00
Jouni Malinen
95fb531ccc tests: EAP-TTLS/EAP-AKA, EAP-PEAP/EAP-AKA, EAP-FAST/EAP-AKA
These add some more EAP-TTLS/PEAP/FAST coverage to test pending Phase 2
response re-processing.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 23:43:50 +03:00
Jouni Malinen
82a8f5b533 tests: Incorrect/missing password with TTLS non-EAP methods
Incorrect password was already tested with TTLS/MSCHAPv2, but the other
non-EAP inner methods in TTLS use their own implementation of password
validation, so check each and also verify the case of no matching EAP
user entry for the specific method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 23:19:28 +03:00
Jouni Malinen
dbd1e184e3 tests: TNC testing
This implements minimal IMC and IMV to allow TNC testing with PEAP (SoH)
and TTLS/FAST with EAP-TNC.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
ae14a2e29f tests: FT negative test with mismatching R0KH-ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-17 20:05:55 +03:00
Jouni Malinen
d314bedf2d tests: EAP-AKA using external USIM processing for UMTS auth
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-16 20:37:39 +03:00
Jouni Malinen
4e0a94b7dc tests: Add more details to help with initial setup configuration
This documents some more steps needed during initial test setup
configuration to make it easier to get this running even without
thorough knowledge of the network setup used by the operating system.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-16 19:24:47 +03:00
Jouni Malinen
d00184df7c tests: Verify HT40 coex scan with 20 MHz legacy BSS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-16 01:23:29 +03:00
Jouni Malinen
d352c407e3 tests: Verify that WPS operation report failure if WPS is disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-16 00:58:48 +03:00
Jouni Malinen
4ef7053119 tests: Make GAS test cases more robust
Scan explicitly for the specific AP to work around issues where under
heavy CPU load, the single active scan round may miss the delayed Probe
Response from the AP. In addition, verify that ANQP_GET commands succeed
to make error cases clearer in the log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-16 00:30:40 +03:00
Jouni Malinen
3051c9866b tests: Verify P2P GO Negotiation wait-for-ready timeout
This verifies that the wait for peer to be ready for GO Negotiation is
timed out properly at no less than 120 seconds. Since this is a long
test case, it is disabled by default without the --long option.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 23:58:10 +03:00
Jouni Malinen
33714def3a tests: Verify P2P_FIND operation when interface gets disabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 21:35:09 +03:00
Jouni Malinen
23a6d4d8df tests: Verify scan behavior when interface gets disabled
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 21:10:52 +03:00
Jouni Malinen
76f999b01d tests: Show number of remaining parallel VMs
Make the parallel-vm.sh output a bit more helpful by showing a count of
running VMs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
7e49399b6f tests: Make ap_acl_accept and ap_acl_deny more robust
Use scan_for_bss() to make sure the AP is seen even under heavy CPU
load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
487a31f355 tests: Make wpas_ctrl_bssid_filter more robust
Use scan_for_bss() to make sure the AP is seen even under heavy CPU
load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
54c20c9b43 tests: Make discovery_group_client more robust
Allow three P2P_FIND attempts for discovering the GO on a non-social
channels since the single Probe Response frame can be missed easily
under heavy CPU load.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 18:38:11 +03:00
Jouni Malinen
84a4084177 tests: Make WPS test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
cbb85a0380 tests: Make ap_wpa2_eap_ttls_server_cert_hash_invalid more robust
Instead of checking for multiple EAP starts (which can occur if
EAPOL-Start from supplicant goes out quickly enough, e.g., due to CPU
load), look for the explicit message indicating that TTLS method
initialization failed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
655bc8bfd6 tests: Make FT test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP. In addition, check for ROAM/FT_DS failures to be
able to report errors more clearly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:59 +03:00
Jouni Malinen
841bed04de tests: Make HS 2.0 test cases more robust
Scan explicitly for the AP that may be started during the test case
execution. This is needed to work around issues where under heavy CPU
load, the single active scan round may miss the delayed Probe Response
from the second AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
814f7ac85c tests: Make scan and scan_only more robust
These can fail during heavy CPU load due to active scan dwell time not
being long enough to catch the delayed Probe Response frame from the AP.
Work around this by allowing multiple scan attempts to see the response.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
4221679233 tests: Verify P2P GO start when scan_req = MANUAL_SCAN_REQ
There was a bug in this code path that resulted in the
skip-scan-to-start-GO case to not actually skip the scan. It looks like
this could be hit at least when autoscan was enabled, but it is possible
that some other sequences could hit this as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
16dffef1e6 tests: Work around grpform_pbc_overlap robustness issues
Since P2P Client scan case is now optimzied to use a specific SSID, the
WPS AP will not reply to that and the scan after GO Negotiation can
quite likely miss the AP due to dwell time being short enoguh to miss
the Beaco frame. This has made the test case somewhat pointless, but
keep it here for now with an additional scan to confirm that PBC
detection works if there is a BSS entry for a overlapping AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:49 +03:00
Jouni Malinen
c126cb4d1c tests: Make pmksa_cache_on_roam_back more robust
The single channel scan while associated to another AP and immediately
after starting the second AP can miss the Probe Response frame
especially under heavy CPU load. Avoid false error reports by allowing
multiple scan rounds to be performed. wpas_ctrl_bssid_filter is also
modified to take into account different get_bss() behavior.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-15 16:56:45 +03:00
Jouni Malinen
4162db59ae tests: DUP_NETWORK
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-12 19:43:59 +03:00
Jouni Malinen
0878241778 tests: Clear cfg80211 scan results before HT coex tests
This is needed to avoid incorrect failures based on neighboring BSSes
from earlier test cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 23:01:10 +03:00
Jouni Malinen
5a0c15174b tests: UNAUTH-TLS
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
8ba89e0a32 tests: EAP-pwd with server fragmenting messages
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
47a74ad81a tests: EAP-IKEv2 fragmentation
This adds a test case for the server fragmenting an EAP-IKEv2 message.
In addition, the fragmentation threshold is made shorter to trigger
fragmentation for all messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
46e094bd6f tests: EAP-FAST and missing PAC configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
c6ab1cdbc5 tests: EAP-FAST using binary PAC file format
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 22:47:25 +03:00
Jouni Malinen
4b2d209824 tests: EAP-pwd with invalid group
This could result in wpa_supplicant segmentation fault prior to the
EAP-pwd fix for error case handling.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 21:24:05 +03:00
Jouni Malinen
cb4ac38b15 tests: Fix scan_bss_operations
The BSS id numbers were assumed to start from 0 at the beginning of this
test case, but that is only the case if this is run as the first test
after starting wpa_supplicant. Fix the test case to figure out the id
values dynamically to avoid false errors.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 21:24:05 +03:00
Jouni Malinen
e2a90a4c79 tests: EAP-SIM/AKA configuration parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 21:24:05 +03:00
Jouni Malinen
5b1aaf6cfb tests: EAP-SIM/AKA/AKA' with SQLite
Extend EAP-SIM/AKA/AKA' test coverage by setting up another
authentication server instance to store dynamic SIM/AKA/AKA' information
into an SQLite database. This allows the stored reauth/pseudonym data to
be modified on the server side and by doing so, allows testing fallback
from reauth to pseudonym/permanent identity.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-11 17:57:28 +03:00
Jouni Malinen
32dca985c7 tests: EAP with expanded Nak
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-10 21:33:49 +03:00
Jouni Malinen
633e364b60 tests: EAP roundtrip limit
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-10 21:20:54 +03:00
Jouni Malinen
37ffe7c568 tests: HS 2.0 with FT
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-10 16:17:41 +03:00
Jouni Malinen
fa653bf4ad tests: Add more cred parameters into config file test
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 17:25:19 +03:00
Jouni Malinen
521b7e7925 tests: Verify global control interface before starting each test
This allows control interface issues to be caught in a bit more readable
way in the debug logs. In addition, dump pending monitor socket
information more frequently and within each test case in the log files
to make the output clearer and less likely to go over the socket buffer
limit.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 15:20:23 +03:00
Jouni Malinen
60b9422080 tests: ROAM error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
59650258fd tests: BSS command parameters
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
b102823ddc tests: GET_CAPABILITY special cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
657f50df27 tests: SET_CRED/GET_CRED error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
7b85a9430f tests: Additional REMOVE_CRED coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
5cff0ae2e3 tests: Large number of creds and LIST_CREDS truncation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 15:05:18 +03:00
Jouni Malinen
733c8acf6f tests: SET/GET_NETWORK failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
edb69bd622 tests: SELECT/ENABLE/DISABLE/REMOVE_NETWORK failure cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
4bf1413ea9 tests: SELECT_NETWORK any
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
6257f9c0da tests: WPS PIN provisioning with configured WPS v1.0 AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
0bde923c40 tests: Make ap_wps_init_2ap_pin/pbc more robust
It is possible for the scan to miss a Probe Response frame especially
under heavy load, so try again to avoid reporting invalid failures.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
91bc6c364f tests: Verify network information in SCAN_RESULTS
This checks WPA/RSN IE parsing result and WEP information in
SCAN_RESULTS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
5f0e59329b tests: Invalid MAC address with BLACKLIST
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
26cf800d11 tests: id_str in network configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
20fd210a56 tests: WPS command error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
0dee3a0a5d tests: Make INTERWORKING_SELECT tests more robust
It is possible for a scan to fail to see Probe Response or Beacon frame
under heavy load (e.g., during a parallel-vm.sh test run) since the
dwell time on a chanenl is quite short. Make the test cases using
INTERWORKING_SELECT more robust by trying again if the first attempt
does not find a matching BSS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-29 12:52:10 +03:00
Jouni Malinen
befd671c9c tests: Make ap_wps_er_add_enrollee check a bit more robust
It is possible for the final step of the test case to fail under load
(e.g., when using parallel-vm.sh with large number of VMs), so run
through additional scan iterations if the WPS-AUTH flag does not get
removed immediately.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
bd6bb3e37b tests: HT 20/40 co-ex functionality during BSS lifetime
Verify that AP acts on 40 MHz intolerant STA association/disassociation
and on 20/40 co-ex report indicating 40 MHz intolerant AP showed up and
removed.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-29 12:52:10 +03:00
Jouni Malinen
3cf48c4f2e tests: Fix a typo on a wpas_config_file error path
In addition, print the config files in error case to the debug log.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-04-24 12:15:32 +03:00
Jouni Malinen
117caa4a0c tests: wpa_supplicant configuration file reading/writing
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-16 01:45:13 +03:00
Jouni Malinen
2a354dc06f tests: More converage for INTERFACE_ADD
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 23:50:49 +03:00
Jouni Malinen
20066e3fe7 tests: Wi-Fi Display through the global interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 23:43:36 +03:00
Jouni Malinen
bdc4476476 tests: P2P group formation using parameters from persistent group
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
d7fb9e4819 tests: Fix progressive p2p_find to actually use progressive part
It turned out that the initial test case found the GO based on the
initial full scan instead of the progressive search part. Fix this by
started the GO only after the initial full scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
75ee44f2e6 tests: P2P group interface ifdown
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 01:16:32 +03:00
Jouni Malinen
d21939a6fb tests: wpa_supplicant global control interface and SUSPEND/RESUME
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-15 00:06:12 +03:00
Jouni Malinen
cf3f0ec81c tests: Work around invalid ap_wps_ie_fragmentation failures
This can fail if Probe Response frame is missed and Beacon frame was
used to fill in the BSS entry. This can happen, e.g., during heavy load
every now and then and is not really an error, so try to workaround by
runnign another scan.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-14 00:53:27 +03:00
Jouni Malinen
2b46e69811 tests: Try to work around bogus errors in wpas_ctrl_country
It seems like it is possible for a CTRL-EVENT-REGDOM-CHANGE event from a
previous test case to "leak" through to the execution of this test case.
That can result in the validation steps here failing, so wait a bit and clear the pending events before starting the test.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-14 00:45:25 +03:00
Jouni Malinen
ce5d69ac41 tests: Work around mac80211_hwsim survey limitations
ap_multi_bss_acs test case was failing if it was executed immediately
after a test case that used 5 GHz band since the current mac80211_hwsim
channel survey implementation is very limited and reports only a single
channel. For this test case, that channel has to be from the 2.4 GHz
band.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-14 00:38:37 +03:00
Jouni Malinen
aed1c0564f tests: NFC_GET_HANDOVER_REQ/SEL
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 19:25:00 +03:00
Jouni Malinen
ad38f1f05e tests: WPS_NFC_TAG_READ error cases
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 18:46:05 +03:00
Jouni Malinen
0867979cc7 tests: P2P NFC static handover with forced channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 18:33:55 +03:00
Jouni Malinen
c9075f6266 tests: wpa_supplicant country code SET/GET
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 16:33:18 +03:00
Jouni Malinen
8c7559ee8f tests: P2P GO issuing multiple credentials
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 11:46:26 +03:00
Jouni Malinen
e7388bd907 tests: P2P NFC Tag with group interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
b45364b619 tests: NFC tag enable/disable for P2P
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
08429720a7 tests: HT capability overrides
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00
Jouni Malinen
ca38a309bc tests: IBSS with fixed BSSID
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-04-13 10:26:53 +03:00