Commit graph

2077 commits

Author SHA1 Message Date
Jouni Malinen
4425b1ed71 tests: WPS and wpa_supplicant BSS entry limit
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 14:01:57 +03:00
Jouni Malinen
7309e804cf tests: Make mesh_missing_mic more robust
Check for MESH-PEER-CONNECTED from dev[1] before reporting MGMT-RX
timeout errors from dev[0]. This avoids false failures in case the short
0.01 s timeout at the end of the loop was not long enough to catch the
message.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-17 02:05:10 +03:00
Jouni Malinen
0b1b2044cc tests: Add sniffer check to wpas_mesh_max_peering
This verifies that the Accepting Additional Mesh Peerings field is being
cleared properly when the maximum peer links count is reached.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-13 00:04:47 +03:00
Jouni Malinen
a3bd53273e tests: Additional coverage in mesh_sae_groups_invalid
Additional coverage in mesh_rsn_sae_group() with non-zero
wpa_s->mesh_rsn->sae_group_index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-12 17:56:02 +03:00
Jouni Malinen
61854f16ec tests: GAS/ANQP query and Address 3 value selection
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-06-10 22:30:29 +03:00
Jouni Malinen
739fd20cc3 tests: Mesh peering management protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:43:37 +03:00
Jouni Malinen
81d6e230e3 tests: Secure mesh network and PMKID mismatch
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 11:17:00 +03:00
Jouni Malinen
66bb7d97dd tests: Secure mesh network and missing MIC
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 01:20:28 +03:00
Jouni Malinen
98628b7f07 tests: Mesh and failure to derive random nonce
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:24:47 +03:00
Jouni Malinen
044d739bdd tests: Secure mesh network and PMKSA caching failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:20:06 +03:00
Jouni Malinen
e8739be842 tests: Mesh scan element parse error
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
699074d30c tests: Mesh network setup failing due to driver command failure
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-05 00:13:40 +03:00
Jouni Malinen
521a98a8f6 tests: Mesh and default beacon interval
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:47:22 +03:00
Jouni Malinen
ec87430ba1 tests: Extend coverage for mesh OOM testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:44:19 +03:00
Jouni Malinen
56d62fc3dd tests: Open mesh network on VHT 160 MHz channel
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 21:31:51 +03:00
Jouni Malinen
2cf6341e64 tests: Mesh and invalid frequency configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 20:59:39 +03:00
Jouni Malinen
a64476403d tests: Mesh and local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:40:38 +03:00
Jouni Malinen
b0ec3d772a tests: Mesh and local SAE failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:30:49 +03:00
Jouni Malinen
f0ee4535d2 tests: Mesh with invalid SAE group configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-06-04 00:08:16 +03:00
Jouni Malinen
9ec916e9f4 tests: wpa_supplicant secure MESH and SAE group negotiation
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:15:30 +03:00
Jouni Malinen
582841689f tests: Secure mesh network setup local failure
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 21:10:58 +03:00
Jouni Malinen
4d4cdc3bb2 tests: wpa_supplicant mesh scan results and OOM
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-30 20:03:32 +03:00
Jonathan Afek
d28cfc2a25 tests: Support P2P group interfaces in hwsim remote tests
Start using the wpa_supplicant remote UDP interface for the control and
monitor sockets for P2P group interfaces so that P2P tests would work on
real hardware. Also have the group requests and events show in the test
log with the hostname and the interface name of the group interface.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-30 17:56:43 +03:00
Jouni Malinen
aa59370b34 tests: wpa_supplicant mesh with dynamic interface addition failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:50:09 +03:00
Jouni Malinen
b15acadcfd tests: Mesh network setup failing due to OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-30 01:05:16 +03:00
Jouni Malinen
8f5abdb874 tests: More coverage in ap_reassociation_to_same_bss
The extra wait forces the special reattach-scan case to be reached in
wpa_supplicant_scan().

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:28:15 +03:00
Jouni Malinen
3d53cd50ab tests: More coverage in wpas_ctrl_sched_scan_plans
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 23:00:42 +03:00
Jouni Malinen
4208329528 tests: Scan with SET freq_list and scan_cur_freq
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
fccc4bd518 tests: Duplicate SSID removal with scan_id list
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jouni Malinen
0b0e4792d3 tests: Increase scan_fail coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-28 22:47:31 +03:00
Jonathan Afek
8efc83d4e7 tests: Add support for wlantest for remote hwsim tests
Use a monitor interface given in the command line that is not also a
station or an AP as a monitor running wlantest on the channel used by
the test. This makes all the tests that use wlantest available for
execution on real hardware on remote hosts.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:34:09 +03:00
Jonathan Afek
04fd8ea1ba tests/remote: Use a function to add a log file to a remote host
Instead of accessing the logs list member of the remote host directly,
use a function to add logs to the remote host to be collected after the
test. This enables us to later have different implementation of remote
hosts or logs collection without requiring to have this list as the
implementation.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:48 +03:00
Jonathan Afek
e2f3f0232f tests: Use 10 retries for over-the-air broadcast connectivity
The regular hwsim tests use both unicast and broadcast frames to test
the connectivity between 2 interfaces. For real hardware (remote hwsim
tests) the broadcast frames will sometimes not be seen by all connected
stations since they can be in low power mode during DTIM or because
broadcast frames are not ACKed. Use 10 retries for broadcast
connectivity tests for real hardware so that the test will pass if we
successfully received at least one of them.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:41 +03:00
Jouni Malinen
90b4c73fdf tests: Fix ap_wpa2_eap_fast_prf_oom with the updated PRF implementation
This is needed to work with the tls_openssl.c changes that renamed the
function that is used for deriving the EAP-FAST keys.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-23 20:40:14 +03:00
Jouni Malinen
7f03ecc884 tests: Scan failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-23 18:43:58 +03:00
Jouni Malinen
a68a749322 tests: P2P group formation using P2PS method without specifying PIN
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-20 23:37:51 +03:00
Jouni Malinen
f260ce4be8 tests: wpa_supplicant AP mode - WPS disabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 19:43:30 +03:00
Jouni Malinen
50d06776c6 tests: Fix WEXT testing
Commit afb2e8b891 ('tests: Store P2P
Device ifname in class WpaSupplicant') did not take into account the
possibility of capa.flags not existing in get_driver_status() and broke
WEXT test cases. Fix this by checking that capa.flags is present before
looking at its value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-05-14 18:59:47 +03:00
Janusz Dziedzic
a73fa13be2 tests/remote: Add utils file
Add rutils.py for remote tests.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
ede4719718 tests/remote: Add monitor.py
Add monitor support. This supports monitors added to the current
interfaces. This also support standalone monitor with multi interfaces
support. This allows to get logs from different channels at the same
time to one pcap file.

Example of t3-monitor added to config.py file.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:56:37 +03:00
Janusz Dziedzic
6a003eb2a6 tests: remotehost.py use join
Use join instead of for.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2016-05-14 17:19:59 +03:00
Jouni Malinen
df49b90e35 tests: Secure mesh and the first plink Open dropped
This is a regression test case to verify that MTK is calculated properly
also in this unexpected sequence.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-13 20:54:51 +03:00
Jouni Malinen
9524e7e5a4 tests: Open network connection with pmf=2
This verifies that pmf=2 is ignored for a non-RSN network while a
network profile specific ieee80211w=2 is enforced.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-06 00:35:08 +03:00
Jouni Malinen
2dc754e170 tests: wpa_supplicant config file parsing of arbitrary global values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
596a3fef83 tests: Use \t instead of \n in discovery_ctrl_char_in_devname
This is needed to allow the SET command to be modified to reject newline
characters.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
8721af54e4 tests: wpa_supplicant config parsing of arbitrary cred values
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
5594df44c7 tests: wpa_supplicant config file writing with arbitrary PSK value
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
f529c0d908 tests: wpa_supplicant config file parsing/writing with WPS
This verifies that a WPA2PSK passphrase with control characters gets
rejected in a WPS Credential and that control characters in SSID get
written as a hexdump.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-05-02 11:08:25 +03:00
Jouni Malinen
0663ae22ff tests: Do not use tabs for indentation
Be more consistent with indentation (always uses spaces in Python
files).

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-04-25 00:19:40 +03:00
Andrei Otcheretianski
a274b1bcbb tests: Test configuration propagation to group interface
When a dedicated P2P Device interface is used, its configuration should
be cloned to the group interface. Add a test that covers this both when
a separate group interface is used and not.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2016-04-25 00:15:35 +03:00