hostap/tests/hwsim
Jonathan Afek 04fd8ea1ba tests/remote: Use a function to add a log file to a remote host
Instead of accessing the logs list member of the remote host directly,
use a function to add logs to the remote host to be collected after the
test. This enables us to later have different implementation of remote
hosts or logs collection without requiring to have this list as the
implementation.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>
2016-05-28 16:33:48 +03:00
..
auth_serv tests: Accept "user@example.com" as user identity similarly to "user" 2016-03-11 21:06:15 +02:00
tnc tests: Use QUIET=1 option to make build.sh output much shorter 2014-12-29 15:49:05 +02:00
vm tests: DFS CAC functionality on channel 104 HT40- 2016-03-27 20:30:40 +03:00
bss-1.conf tests: Test dynamic BSS addition/removal 2013-10-31 23:04:50 +02:00
bss-2.conf tests: Test dynamic BSS addition/removal 2013-10-31 23:04:50 +02:00
bss-3.conf tests: Test dynamic BSS addition/removal 2013-10-31 23:04:50 +02:00
bss-ht40-1.conf tests: Verify BSS additional/removal during HT co-ex scan 2013-11-06 15:52:40 +02:00
bss-ht40-2.conf tests: Verify BSS additional/removal during HT co-ex scan 2013-11-06 15:52:40 +02:00
build.sh tests: Set FIPSLD_CC=gcc (if not set) to make CONFIG_FIPS=y use easier 2015-08-01 16:57:04 +03:00
check_kernel.py tests: Catch RTNL assertions in the kernel check 2015-08-24 19:28:12 +03:00
dictionary.radius tests: Verify dynamic_vlan=required is honored with macaddr_acl=2 2015-04-25 10:28:19 +03:00
example-hostapd.config tests: Add CONFIG_VLAN_NETLINK=y to hostapd build configuration 2016-03-20 19:54:57 +02:00
example-setup.txt tests: Document tshark and python-netifaces as dependencies 2016-02-28 15:25:37 +02:00
example-wpa_supplicant.config tests: Enable CONFIG_MBO in hwsim configs 2016-02-22 19:53:04 +02:00
fst_module_aux.py tests: Dump control interface sockets during FST operations 2015-12-30 13:54:18 +02:00
fst_test_common.py tests: Add FST module tests 2015-07-16 18:26:16 +03:00
hostapd.accept tests: Add test cases for AP VLAN 2014-03-08 11:35:08 +02:00
hostapd.macaddr tests: hostapd MAC ACL file entry removal 2014-03-30 17:06:34 +03:00
hostapd.py tests: Use 10 retries for over-the-air broadcast connectivity 2016-05-28 16:33:41 +03:00
hostapd.vlan tests: VLAN using vlan_file mapping 2014-03-30 17:06:34 +03:00
hostapd.wlan3.vlan tests: RSN pre-auth and PMKSA caching with per_sta_vif 2016-02-28 15:43:24 +02:00
hostapd.wlan4.vlan tests: RSN pre-auth and PMKSA caching with per_sta_vif 2016-02-28 15:43:24 +02:00
hostapd.wpa_psk tests: Verify different ways of configuring passphrase/PSK 2014-02-04 13:10:57 +02:00
hwsim.py tests: Introduce hwsim radio context manager 2014-10-21 17:35:20 +03:00
hwsim_utils.py tests: Use 10 retries for over-the-air broadcast connectivity 2016-05-28 16:33:41 +03:00
multi-bss-acs.conf tests: Add test cases for automatic channel selection 2013-11-03 21:30:31 +02:00
multi-bss-iface-per_sta_vif.conf tests: Verify ap_vlan_iface_cleanup_multibss with per_sta_vif 2016-02-17 11:46:13 +02:00
multi-bss-iface.conf tests: Verify correct VLAN operation in multi-BSS multi-VLAN case 2015-06-14 13:40:50 +03:00
multi-bss.conf tests: Add test case for multi-BSS configuration file 2013-11-03 20:20:50 +02:00
netlink.py hwsim tests: Add support for the chanctx flag when creating radios 2014-02-25 16:53:40 +02:00
nl80211.py tests: cfg80211 DEL_STATION issued externally to hostapd 2015-01-29 16:26:31 +02:00
p2p0.conf tests: Add start/stop scripts and configuration files 2013-03-02 11:39:54 +02:00
p2p1.conf tests: Add start/stop scripts and configuration files 2013-03-02 11:39:54 +02:00
p2p2.conf tests: Add start/stop scripts and configuration files 2013-03-02 11:39:54 +02:00
p2p_utils.py tests: Add P2P invitation coverage during p2p_find 2016-04-07 21:10:10 +03:00
radius_das.py tests: Remove unnecessary interpreter line from most python files 2014-02-21 20:21:53 +02:00
README tests: Add step-by-step guide for setting up test framework 2015-01-18 18:11:11 +02:00
remotehost.py tests/remote: Use a function to add a log file to a remote host 2016-05-28 16:33:48 +03:00
rfkill.py tests: Add rfkill module 2015-01-08 20:56:47 +02:00
run-all.sh tests: Properly pass the num of channels to start.sh 2015-08-10 21:10:56 +03:00
run-tests.py tests: Do not use tabs for indentation 2016-04-25 00:19:40 +03:00
start.sh tests: Minimal testing of OCSP stapling with ocsp_multi 2015-12-23 00:32:52 +02:00
stop.sh tests: Optimize stop.sh wait times 2014-12-22 19:37:08 +02:00
test_ap_acs.py tests: Use hapd from hostapd.add_iface() 2016-04-24 19:26:25 +03:00
test_ap_ciphers.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
test_ap_config.py tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss() 2016-04-24 19:25:12 +03:00
test_ap_csa.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_ap_dynamic.py tests: Use hapd from hostapd.add_bss() 2016-04-24 20:16:30 +03:00
test_ap_eap.py tests: Fix ap_wpa2_eap_fast_prf_oom with the updated PRF implementation 2016-05-23 20:40:14 +03:00
test_ap_ft.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_ap_hs20.py tests: Use hapd from hostapd.add_ap() 2016-04-24 20:16:29 +03:00
test_ap_ht.py tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss() 2016-04-24 19:25:12 +03:00
test_ap_mixed.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_ap_open.py tests: Open network connection with pmf=2 2016-05-06 00:35:08 +03:00
test_ap_params.py tests: hostapd assocresp_elements 2016-04-20 13:22:32 +03:00
test_ap_pmf.py tests: Remove unused eap_connect import 2016-04-24 20:16:30 +03:00
test_ap_psk.py tests: Use hostapd.add_ap() instead of HostapdGlobal() (PSK) 2016-04-24 19:24:49 +03:00
test_ap_qosmap.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_ap_roam.py tests: Do not use tabs for indentation 2016-04-25 00:19:40 +03:00
test_ap_tdls.py tests: Use hapd from hostapd.add_ap() in TDLS 2016-04-24 20:16:29 +03:00
test_ap_track.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_ap_vht.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
test_ap_vlan.py tests: Use hapd from hostapd.add_iface() 2016-04-24 19:26:25 +03:00
test_ap_wps.py tests: Don't use proxy in urllib.urlopen() 2016-04-25 00:05:34 +03:00
test_autoscan.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_bgscan.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_cfg80211.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_connect_cmd.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_dbus.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
test_dbus_old.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_dfs.py tests: Use hostapd.add_ap() instead of HostapdGlobal() (DFS) 2016-04-24 19:25:06 +03:00
test_eap_proto.py tests: Pass full apdev to add_ap() function (3) 2016-04-03 22:46:00 +03:00
test_erp.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
test_ext_password.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_fst_config.py tests: Use codecov build hostapd/wpa_supplicant in FST tests 2015-07-19 23:10:55 +03:00
test_fst_module.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_gas.py tests: Use hapd from hostapd.add_ap() 2016-04-24 20:16:29 +03:00
test_hapd_ctrl.py tests: Pass apdev to HostapdGlobal() 2016-04-24 19:26:11 +03:00
test_hostapd_oom.py tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss() 2016-04-24 19:25:12 +03:00
test_hs20_filter.py tests: Modify test_hs20_filter 2016-04-08 15:44:10 +03:00
test_ibss.py tests: IBSS on VHT 80+80 MHz channel 2015-11-26 18:47:40 +02:00
test_ieee8021x.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_mbo.py tests: Do not use tabs for indentation 2016-04-25 00:19:40 +03:00
test_module_tests.py tests: eloop socket re-open from timeout/socket handler 2015-07-23 18:39:02 +03:00
test_monitor_interface.py tests: Pass apdev to hostapd.add_bss() 2016-04-24 16:18:46 +03:00
test_nfc_p2p.py tests: Modify use of GET command to support P2P Device interface 2016-04-24 23:45:19 +03:00
test_nfc_wps.py tests: Use hapd from hostapd.add_ap() 2016-04-24 20:16:29 +03:00
test_offchannel_tx.py tests: Import p2p_utils instead of functions from old locations 2015-11-25 15:47:16 +02:00
test_p2p_autogo.py tests: Use global control interface to set p2p_no_group_iface 2016-04-24 23:47:29 +03:00
test_p2p_channel.py tests: Use global control interface for P2P configurations 2016-04-25 00:03:40 +03:00
test_p2p_concurrency.py tests: Use global control interface to set p2p_no_group_iface 2016-04-24 23:47:29 +03:00
test_p2p_device.py tests: Test configuration propagation to group interface 2016-04-25 00:15:35 +03:00
test_p2p_discovery.py tests: Use \t instead of \n in discovery_ctrl_char_in_devname 2016-05-02 11:08:25 +03:00
test_p2p_ext.py tests: Move P2P helper functions to a separate file 2015-10-25 19:37:17 +02:00
test_p2p_grpform.py tests: Replace HostapdGlobal() + remove() with hostapd.remove_bss() 2016-04-24 19:25:12 +03:00
test_p2p_invitation.py tests: Update group ifname in p2p_go_invite_auth 2015-02-05 13:38:10 +02:00
test_p2p_messages.py tests: Modify p2p_msg_long_ssid to support P2P Device interface 2016-04-24 23:13:14 +03:00
test_p2p_persistent.py tests: Fix persistent_group_peer_dropped tests 2016-04-25 00:06:20 +03:00
test_p2p_service.py tests: Use global control interface in test_p2p_service 2015-02-05 13:48:40 +02:00
test_p2p_set.py tests: Fix p2p_set_discoverability waiting for CTRL-EVENT-CONNECTED 2015-06-19 11:27:15 +03:00
test_p2p_wifi_display.py tests: Fix wifi_display_parsing 2015-10-31 16:31:03 +02:00
test_p2ps.py tests: P2P group formation using P2PS method without specifying PIN 2016-05-20 23:37:51 +03:00
test_peerkey.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_pmksa_cache.py tests: Use hapd from hostapd.add_ap() in eap_connect() 2016-04-24 20:06:17 +03:00
test_radio_work.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_radius.py tests: Use hapd from hostapd.add_ap() 2016-04-24 20:16:29 +03:00
test_rfkill.py tests: Do not use tabs for indentation 2016-04-25 00:19:40 +03:00
test_rrm.py tests: Add RRM tests 2016-04-17 18:32:18 +03:00
test_sae.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
test_scan.py tests: Scan failures 2016-05-23 18:43:58 +03:00
test_ssid.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_sta_dynamic.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_suite_b.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_tnc.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_wep.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_wext.py tests: Pass full apdev to add_ap() function (1) 2016-04-03 22:45:57 +03:00
test_wmediumd.py tests: Add a simple wmediumd test 2015-11-27 21:11:53 +02:00
test_wnm.py tests: Do not use tabs for indentation 2016-04-25 00:19:40 +03:00
test_wpas_ap.py tests: wpa_supplicant AP mode - WPS disabled 2016-05-14 19:43:30 +03:00
test_wpas_config.py tests: wpa_supplicant config file parsing of arbitrary global values 2016-05-02 11:08:25 +03:00
test_wpas_ctrl.py tests: Add RRM tests 2016-04-17 18:32:18 +03:00
test_wpas_mesh.py tests: Secure mesh and the first plink Open dropped 2016-05-13 20:54:51 +03:00
test_wpas_wmm_ac.py tests: Pass full apdev to add_ap() function (4) 2016-04-03 22:46:12 +03:00
tshark.py tests: Use wlantest without capture file write buffering 2015-11-27 00:12:38 +02:00
utils.py tests: Convert Host() class to use list of arguments instead of string 2016-04-24 20:16:30 +03:00
w1fi_logo.png tests: HS 2.0 OSU and icon fetch 2014-03-02 10:35:34 +02:00
wlantest.py tests: Re-association to same BSS to toggle PMF status 2015-02-19 16:37:12 +02:00
wpasupplicant.py tests: P2P group formation using P2PS method without specifying PIN 2016-05-20 23:37:51 +03:00
wps-ctrl-cred tests: wpa_supplicant config file parsing/writing with WPS 2016-05-02 11:08:25 +03:00
wps-ctrl-cred2 tests: wpa_supplicant config file parsing/writing with WPS 2016-05-02 11:08:25 +03:00
wps-mixed-cred tests: WPS mixed-WPA/WPA2 credential merging 2014-08-29 20:25:18 +03:00
wps-wep-cred tests: WPS 2.0 rejection of WEP credential 2014-03-05 12:40:54 +02:00

Automated hostapd/wpa_supplicant testing with mac80211_hwsim
------------------------------------------------------------

This directory contains testing infrastructure and test cases to run
automated tests of full hostapd and wpa_supplicant functionality. This
testing is done with the help of mac80211_hwsim which is Linux kernel
driver that simulates IEEE 802.11 radios without requiring any
additional hardware. This setup most of the hostapd and wpa_supplicant
functionality (and large parts of the Linux cfg80211 and mac80211
functionality for that matter) to be tested.

mac80211_hwsim is loaded with five simulated radios to allow different
device combinations to be tested. wlantest is used analyze raw packets
captured through the hwsim0 monitor interface that capture all frames
sent on all channels. wlantest is used to store the frames for
analysis. Three wpa_supplicant processes are used to control three
virtual radios and one hostapd process is used to dynamically control
the other two virtual radios. wpa_supplicant/hostapd test functionality
is used to verify that data connection (both unicast and broadcast)
works between two netdevs.

The python scripts and tools in this directory control test case
execution. They interact wpa_supplicant and hostapd through control
interfaces to perform the operations. In addition, wlantest_cli is used
to verify that operations have been performed correctly and that the
network connection works in the expected way.

These test cases are run automatically against the hostap.git commits
for regression testing and to help in keeping the hostap.git master
branch in stable state. Results from these tests are available here:
http://buildbot.w1.fi/hwsim/


Building binaries for testing
-----------------------------

You will need to build (or use already built) components to be
tested. These are available in the hostap.git repository and can be
built for example as follows:

cd ../../wpa_supplicant
cp ../tests/hwsim/example-wpa_supplicant.config .config
make clean
make
cd ../hostapd
cp ../tests/hwsim/example-hostapd.config .config
make clean
make hostapd hlr_auc_gw
cd ../wlantest
make clean
make

Alternatively, the build.sh script here can be used to run these steps
with conditional creation of .config files only if they do not exist.

The test scripts can find the binaries in the locations where they were
built. It is also possible to install wlantest_cli somewhere on the path
to use pre-built tools.

Please note that some of the configuration parameters used to enable
more testing coverage may require development packages that may not be
installed by default in many distributions. For example, following
Debian/Ubuntu packages are likely to be needed:
- binutils-dev
- libsqlite3-dev
- libpcap-dev

example-setup.txt provides more complete step-by-step example on how a
test setup can be built.


wpaspy
------

The python scripts use wpaspy.py to interact with the wpa_supplicant
control interface, but the run-tests.py script adds the (relative)
path into the environment so it doesn't need to be installed.


mac80211_hwsim
--------------

mac80211_hwsim kernel module is available from the upstream Linux
kernel. Some Linux distributions enable it by default. If that's not the
case, you can either enable it in the kernel configuration
(CONFIG_MAC80211_HWSIM=m) and rebuild your kernel or use Backports with
CPTCFG_MAC80211_HWSIM=m to replace the wireless LAN components in the
base kernel.


sudo
----

Some parts of the testing process requires root privileges. The test
scripts are currently using sudo to achieve this. To be able to run the
tests, you'll probably want to enable sudo with a timeout to not expire
password entry very quickly. For example, use this in the sudoers file:

Defaults        env_reset,timestamp_timeout=180

Or on a dedicated test system, you could even disable password prompting
with this in sudoers:

%sudo   ALL=NOPASSWD: ALL


Other network interfaces
------------------------

Some of the test scripts are still using hardcoded interface names, so
the easiest way of making things work is to avoid using other network
devices that may use conflicting interface names. For example, unload
any wireless LAN driver before running the tests and make sure that
wlan0..4 gets assigned as the interface names for the mac80211_hwsim
radios. It may also be possible to rename the interface expectations in
run-tests.py to allow other names to be used.

Please also note that some commonly enabled tools, like NetworkManager,
may end up trying to control new network interfaces automatically. This
can result in conflicts with the test scripts and you may need to
disable such network services or at least mark the mac80211_hwsim wlan#
interfaces as umanaged. As an example, this can be done in
/etc/NetworkManager/NetworkManager.conf with following addition:

[keyfile]
unmanaged-devices=mac:02:00:00:00:00:00;mac:02:00:00:00:01:00;mac:02:00:00:00:02:00;mac:02:00:00:00:03:00;mac:02:00:00:00:04:00


Running tests
-------------

Simplest way to run a full set of the test cases is by running
run-all.sh in tests/hwsim directory. This will use start.sh to load the
mac80211_hwsim module and start wpa_supplicant, hostapd, and various
test tools. run-tests.sh is then used to run through all the defined
test cases and stop.sh to stop the programs and unload the kernel
module.

run-all.sh can be used to run the same test cases under different
conditions:

# run normal test cases
./run-all.sh

# run normal test cases under valgrind
./run-all.sh valgrind

# run normal test cases with Linux tracing
./run-all.sh trace

# run normal test cases with multi channel support (see details below)
./run-all.sh channels=<num of channels>

run-all.sh directs debug logs into the logs subdirectory (or $LOGDIR if
present in the environment). Log file names include the current UNIX
timestamp and a postfix to identify the specific log:
- *.log0 = wpa_supplicant debug log for the first radio
- *.log1 = wpa_supplicant debug log for the second radio
- *.log2 = wpa_supplicant debug log for the third radio
- *.hostapd = hostapd debug log
- hwsim0 = wlantest debug log
- hwsim0.pcapng = capture with all frames exchanged during the tests
- *.log = debug prints from the test scripts
- trace.dat = Linux tracing record (if enabled)
- hlr_auc_gw - hlr_auc_gw (EAP-SIM/AKA/AKA' authentication) log
- auth_serv - hostapd as RADIUS authentication server log


For manual testing, ./start.sh can be used to initialize interfaces and
programs and run-tests.py to execute one or more test
cases. run-tests.py output verbosity can be controlled with -d (more
verbose debug output) and -q (less verbose output) on the command
line. "-f <module name>" (pointing to file test_<module name>.py) can be
used to specify that all test cases from a single file are to be
run. Test name as the last command line argument can be specified that a
single test case is to be run (e.g., "./run-tests.py ap_pmf_required").

Notice that some tests require the driver to support concurrent
operation on multi channels in order to run. These tests will be skipped
in case the driver does not support multi channels. To enable support
for multi channel, the number of supported channel is passed as an
argument to run-all.sh or start.sh


Adding/modifying test cases
---------------------------

All the test cases are defined in the test_*.py files. These are python
scripts that can use the local helper classes to interact with the test
components. While various python constructs can be used in the scripts,
only a minimal level of python knowledge should really be needed to
modify and add new test cases. The easiest starting point for this is
likely to take a look at some of the example scripts. When working on a
new test, run-tests.py with -d and the test case name on the command
line is a convenient way of verifying functionality.

run-tests.py will automatically import all test cases from the test_*.py
files in this directory. All functions starting with the "test_" prefix
in these files are assumed to be test cases. Each test case is named by
the function name following the "test_" prefix.


Results database
----------------

run-tests.py can be requested to write results from the execution of
each test case into an sqlite database. The "-S <path to database>" and
"-b <build id>" command line arguments can be used to do that. The
database must have been prepared before this, e.g., with following:

cat | sqlite3 /tmp/example.db <<EOF
CREATE TABLE results (test,result,run,time,duration,build,commitid);
CREATE INDEX results_idx ON results (test);
CREATE INDEX results_idx2 ON results (run);
CREATE TABLE tests (test,description);
CREATE UNIQUE INDEX tests_idx ON tests (test);
CREATE TABLE logs (test,run,type,contents);
CREATE INDEX logs_idx ON logs (test);
CREATE INDEX logs_idx2 ON logs (run);
EOF