Commit graph

1524 commits

Author SHA1 Message Date
Disha Das
b709bb40fd DPP2: Add DPP_CONTROLLER commands to hostapd_cli and wpa_cli
Add the DPP control interface DPP_CONTROLLER_START and
DPP_CONTROLLER_STOP commands to the CLIs.

Signed-off-by: Disha Das <dishad@codeaurora.org>
2020-12-16 18:04:15 +02:00
Veerendranath Jakkam
7131fede34 Extend the setband support for 6 GHz and band combinations
Support possible band combinations of 2.4 GHz, 5 GHz, and 6 GHz with
QCA_WLAN_VENDOR_ATTR_SETBAND_MASK attribute. Ensure backwards
compatibility with old drivers that are using
QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE attribute and supporting only 2.4 GHz
and 5 GHz bands.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-12-11 19:56:14 +02:00
John Crispin
d83eaa351e Add option to ignore Probe Request frames when RSSI is too low
Add a new hostapd configuration parameters rssi_ignore_probe_request to
ignore Probe Request frames received with too low RSSI.

Signed-off-by: John Crispin <john@phrozen.org>
2020-12-02 17:14:39 +02:00
Shay Bar
eee0d242bb hostapd: Add ability to disable HT/VHT/HE per BSS
Add the ability to disable HT/VHT/HE for specific BSS from hostapd.conf.

- Add disable_11ax boolean to hostapd_bss_config.
- Change disable_11n and disable_11ac to bool in hostapd_bss_config.
- Add configuration option to set these disable_11* parameters
  (which were previously used only automatically based on incompatible
  security parameters to disable HT/VHT).

Signed-off-by: Shay Bar <shay.bar@celeno.com>
2020-12-02 13:41:18 +02:00
Vinita S. Maloo
c2c4686228 Set NLA_F_NESTED flag with NL80211_ATTR_VENDOR_DATA conditionally
The newer kernel versions enforce strict netlink attribute policy
validation and will cause cfg80211 to reject vendor commands with
NL80211_ATTR_VENDOR_DATA if NLA_F_NESTED attribute is not set but
if the vendor command is expecting nested data within
NL80211_ATTR_VENDOR_DATA attribute.

Most of the earlier instances were addressed by adding NLA_F_NESTED
flag in nla_nest_start(). This commit addresses the remaining
instance in which NL80211_ATTR_VENDOR_DATA is populated using data
set by user through the control interface.

Enhance the control interface VENDOR command to indicate whether the
vendor subcommand uses nested attributes within NL80211_ATTR_VENDOR_DATA
attribute or not.

Set NLA_F_NESTED flag for existing QCA vendor commands which use nested
attributes within the NL80211_ATTR_VENDOR_DATA attributes so that the
old frameworks implementations for already existing commands work
without any issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-11-10 23:48:00 +02:00
Yegor Yefremov
d720de929f hostapd: Fix typos
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-10-16 12:45:24 +03:00
Wystan Schmidt
e3b47cdf86 DPP2: Add DPP_CHIRP commands to hostapd_cli and wpa_cli
Add the DPP control interface chirp commands to the CLIs for greater
visibility and ease of use.

Signed-off-by: Wystan Schmidt <wystan.schmidt@charter.com>
2020-10-11 20:26:21 +03:00
Andrew Beltrano
1a0169695b hostapd_cli: Add dpp_bootstrap_set command
Expose DPP_BOOTSTRAP_SET through hostapd_cli command
dpp_bootstrap_set <id> <configurator params..>

Signed-off-by: Andrew Beltrano <anbeltra@microsoft.com>
2020-10-11 19:51:39 +03:00
Johannes Berg
283eee8eed gitignore: Clean up a bit
Now that we no longer leave build artifacts outside the build folder, we
can clean up the gitignore a bit. Also move more things to per-folder
files that we mostly had already anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-11 19:32:50 +03:00
Pali Rohár
58c18bcf86 hostapd: Fix error message for radius_accept_attr config option
Error message contained wrong config option.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-10-10 20:53:01 +03:00
Johannes Berg
ad6e4a5c59 build: Remove hostapd vs. wpa_supplicant build checks
These are no longer needed now. Note that this was never actually
sufficient since src/drivers/ isn't the only thing shared, and thus a
cross-build detection didn't work in all cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:53:38 +03:00
Johannes Berg
722138cd25 build: Put object files into build/ folder
Instead of building in the source tree, put most object
files into the build/ folder at the root, and put each
thing that's being built into a separate folder.

This then allows us to build hostapd and wpa_supplicant
(or other combinations) without "make clean" inbetween.

For the tests keep the objects in place for now (and to
do that, add the build rule) so that we don't have to
rewrite all of that with $(call BUILDOBJS,...) which is
just noise there.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:51:39 +03:00
Johannes Berg
0464d5d5d6 build: Move config file handling into build.rules
This will make it easier to split out the handling in
a proper way, and handle common cflags/dependencies.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:49:31 +03:00
Johannes Berg
0430bc8267 build: Add a common-clean target
Clean up in a more common fashion as well, initially for ../src/.

Also add $(Q) to the clean target in src/

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:48:41 +03:00
Johannes Berg
a41a29192e build: Pull common fragments into a build.rules file
Some things are used by most of the binaries, pull them
into a common rule fragment that we can use properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-10-10 12:47:29 +03:00
Veerendranath Jakkam
debf3e2165 OCV: Work around for misbehaving STAs that indicate OCVC=1 without OCI
Some legacy stations copy previously reserved RSN capability bits,
including OCVC, in (Re)Association Request frames from the AP's RSNE but
do not indicate MFP capability and/or do not send OCI in RSN handshakes.
This is causing connection failures with such erroneous STAs.

To improve interoperability with such legacy STAs allow a workaround OCV
mode to be enabled to ignore OCVC=1 from the STA if it does not follow
OCV requirements in the first protected exchange. This covers cases
where a STA claims to have OCV capability, but it does not negotiate use
of management frame protection or does not include OCI in EAPOL Key msg
2/4, FT Reassociation Request frame, or FILS (Re)Association Reqest.

The previous behavior with ocv=1 is maintained, i.e., misbehaving STAs
are not allowed to connect. When the new workaround mode is enabled with
ocv=2, the AP considers STA as OCV capable on below criteria
- STA indicates both OCV and MFP capability
- STA sends OCI during connection attempt in a protected frame

Enabling this workaround mode reduced OCV protection to some extend
since it allows misbehavior to go through. As such, this should be
enabled only if interoperability with misbehaving STAs is needed.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-10-08 18:46:38 +03:00
Shaakir Mohamed
41f8189057 SAE-PK: Add support to skip sae_pk password check for testing purposes
Add support to skip sae_pk password check under compile flag
CONFIG_TESTING_OPTIONS which allows AP to be configured with
sae_pk enabled but a password that is invalid for sae_pk.

Signed-off-by: Shaakir Mohamed <smohamed@codeaurora.org>
2020-09-11 15:45:42 +03:00
Jouni Malinen
c043b1e000 DPP: Remove unnecessary dpp_global_config parameters
These were not really used anymore since the AP/Relay case did not set
msg_ctx or process_conf_obj in the global DPP context. Get the
appropriate pointers more directly from the more specific data
structures instead and remove these global values.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-25 16:02:29 +03:00
Jouni Malinen
4ecb6dd16b DPP2: Controller support in hostapd
Extend hostapd support for DPP Controller to cover the DPP_CONTROLLER_*
cases that were previously implemented only in wpa_supplicant. This
allows hostapd/AP to be provisioned using DPP over TCP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-25 15:53:08 +03:00
Jouni Malinen
0a9d7b169e SAE-PK: Update design for fingerprint encoding into password
Update the SAE-PK implementation to match the changes in the protocol
design:
- allow only Sec values 3 and 5 and encode this as a single bit field
  with multiple copies
- add a checksum character

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-05 22:05:20 +03:00
Jouni Malinen
2f858254cc Extend GET_PMK to check PMKSA cache on the AP
This allows the testing command GET_PMK to return a PMK in cases where
the association fails (e.g., when using SAE and getting a valid PMKSA
entry added before association) or after the association has been lost.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-08-03 15:38:30 +03:00
Jouni Malinen
f8c756c5b8 FT: Rename temporary blocking of nonresponsive R0KH
Avoid use of the "blacklist" term here to reduce undesired connotations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-07-24 12:25:32 +03:00
Wu Gao
52a3257621 6 GHz: Change 6 GHz channels per IEEE P802.11ax/D6.1
The channel numbering/center frequencies was changed in IEEE
P802.11ax/D6.1. The center frequencies of the channels were shifted by
10 MHz. Also, a new operating class 136 was defined with a single
channel 2. Add required support to change the channelization as per IEEE
P802.11ax/D6.1.

Signed-off-by: Wu Gao<wugao@codeaurora.org>
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
2020-06-24 00:29:37 +03:00
Jouni Malinen
cd99a8c432 EAP-TEAP (server): Allow Phase 2 skip based on client certificate
eap_teap_auth=2 can now be used to configure hostapd to skip Phase 2 if
the peer can be authenticated based on client certificate during Phase
1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-06-20 18:07:04 +03:00
Jouni Malinen
c7cb42d531 Remove unused enum values
The last user of these was removed in commit 17fbb751e1 ("Remove user
space client MLME") and there is no need to maintain these unused values
anymore.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:21:06 +03:00
Subrat Dash
411e42673f Move local TX queue parameter parser into a common file
This allows the same implementation to be used for wpa_supplicant as
well.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-09 00:17:39 +03:00
Jouni Malinen
4ff0df39eb SAE-PK: Testing functionality to allow behavior overrides
The new sae_commit_status and sae_pk_omit configuration parameters and
an extra key at the end of sae_password pk argument can be used to
override SAE-PK behavior for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 15:21:18 +03:00
Jouni Malinen
0c4ffce464 Allow transition_disable updates during the lifetime of a BSS
This is mainly for testing purposes to allow more convenient checking of
station behavior when a transition mode is disabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-07 17:06:52 +03:00
Jouni Malinen
fb09ec87f2 SAE-PK: A tool for generating SAE-PK Modifier and password
sae_pk_gen can be used to generate Modifier (M) and password for SAE-PK
based on a previously generated EC private key, Sec value (2..5), and
SSID.

For example, these commands can be used to generate the private key and
the needed hostapd configuration parameter options:

make sae_pk_gen
openssl ecparam -genkey -outform DER -out saepk.der -name prime256v1
./sae_pk_gen saepk.der 3 "SAE-PK test"

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
20ccf97b3d SAE-PK: AP functionality
This adds AP side functionality for SAE-PK. The new sae_password
configuration parameters can now be used to enable SAE-PK mode whenever
SAE is enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
6b9e99e571 SAE-PK: Extend SAE functionality for AP validation
This adds core SAE functionality for a new mode of using SAE with a
specially constructed password that contains a fingerprint for an AP
public key and that public key being used to validate an additional
signature in SAE confirm from the AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
661e661186 OCV: Allow OCI channel to be overridden for testing (AP)
Add hostapd configuration parameters oci_freq_override_* to allow the
OCI channel information to be overridden for various frames for testing
purposes. This can be set in the configuration and also updated during
the runtime of a BSS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-30 00:04:53 +03:00
Johannes Berg
bd1aebbd08 hostapd: Extend RESET_PN for BIGTK
Extend the RESET_PN command to allow resetting the BIGTK PN
for testing.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-17 01:31:16 +03:00
Jouni Malinen
98e4b38403 DPP2: Chirping in hostapd Enrollee
Add a new hostapd control interface command "DPP_CHIRP own=<BI ID>
iter=<count>" to request chirping, i.e., sending of Presence
Announcement frames, to be started. This follows the model of similar
wpa_supplicant functionality from commit 562f77144c ("DPP2: Chirping
in wpa_supplicant Enrollee"). The hostapd case requires the AP to be
started without beaconing, i.e., with start_disabled=1 in hostapd
configuration, to allow iteration of channels needed for chirping.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-13 17:59:05 +03:00
Jouni Malinen
95471fc3e8 Handle hostapd_for_each_interface() at the process termination
Clean struct hapd_interfaces pointers and interface count during
deinitialization at the end of theh ostapd process termination so that a
call to hostapd_for_each_interface() after this does not end up
dereferencing freed memory. Such cases do not exist before this commit,
but can be added after this, e.g., for DPP needs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-13 17:39:01 +03:00
Jouni Malinen
3aaf269f67 DPP: Move TCP encapsulation into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
21c612017b DPP: Move configurator backup into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
fdbbb74064 DPP: Move authentication functionality into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 17:26:11 +03:00
Jouni Malinen
0c043d9de7 DPP2: Reconfig Announcement transmission
Extend DPP chirping mechanism to allow Reconfig Announcement frames to
be transmitted instead of the Presence Announcement frames. Add a new
wpa_supplicant control interface command "DPP_RECONFIG <network id>" to
initiate reconfiguration for a specific network profile.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
d4ae12355a DPP: Move PKEX functionality into a separate source code file
This continues splitting dpp.c into smaller pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 16:41:33 +03:00
Jouni Malinen
87b6572616 DPP: Move crypto routines into a separate source code file
This is an initial step in splitting the overly long dpp.c into smaller
pieces.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-11 12:09:24 +03:00
Jouni Malinen
12c8eacf73 DPP: Allow version number to be overridden for testing purposes
"SET dpp_version_override <ver>" can now be used to request
wpa_supplicant and hostapd to support a subset of DPP versions. In
practice, the only valid case for now is to fall back from DPP version 2
support to version 1 in builds that include CONFIG_DPP2=y.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:45 +03:00
Jouni Malinen
f23b70f163 Silence compiler warning in no-NEED_AP_MLME hostapd builds
The static function hostapd_ctrl_check_freq_params() was called only
within #ifdef NEED_AP_MLME block so the function needs to be defined
under matching condition.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 17:42:41 +03:00
Jouni Malinen
bb9e3935dd driver: Add second driver capability flags bitmap
All 64 bits of the capability flags bitmap are used, so add a new
variable to hold future capability bits.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-19 15:53:02 +03:00
Disha Das
6b1c590ebb Allow TKIP support to be removed from build
Add a build flag CONFIG_NO_TKIP=y to remove all TKIP functionality from
hostapd and wpa_supplicant builds. This disables use of TKIP as both the
pairwise and group cipher. The end result does not interoperate with a
WPA(v1)-only device or WPA+WPA2 mixed modes.

Signed-off-by: Disha Das <dishad@codeaurora.org>
2020-04-17 23:51:58 +03:00
Jouni Malinen
a6c689d354 FT: Testing override for RSNXE Used subfield in FTE (AP)
Allow hostapd to be requested to override the RSNXE Used subfield in FT
reassociation case for testing purposes with "ft_rsnxe_used=<0/1/2>"
where 0 = no override, 1 = override to 1, and 2 = override to 0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-16 23:39:57 +03:00
Jouni Malinen
97beccc838 SAE: Fix build without DPP/OWE/ERP
SAE needs sha256-kdf.c to be included in the build.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-04 18:11:11 +03:00
Sriram R
e149051ced hostapd: Validate the country_code parameter value
cfg80211/regulatory supports only ISO 3166-1 alpha2 country code and
that's what this parameter is supposed to use, so validate the country
code input before accepting the value. Only characters A..Z are
accepted.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
2020-03-30 12:37:54 +03:00
Sergey Matyukevich
c60717f839 hostapd: Add support for DFS channels in CHAN_SWITCH
Enable support for DFS channels in the CHAN_SWITCH command. Perform CAC
instead of CSA if DFS channel is selected. Then restart normal AP
operations.

Note that the current implementation provides a simplified approach. It
does not check if the selected DFS channel block is already in the
HOSTAPD_CHAN_DFS_AVAILABLE state. CAC procedure is restarted anyway.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2020-03-29 21:15:16 +03:00
Sergey Matyukevich
30b6d4bb7d hostapd: Basic channel check for CHAN_SWITCH parameters
Implement channel sanity check for the CHAN_SWITCH command. Verify
provided values for bandwidth, frequencies, and secondary channel
offset. Reject requested channel switch operation if basic constraints
on frequencies and bandwidth are not fulfilled.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2020-03-29 21:15:16 +03:00