Commit graph

7615 commits

Author SHA1 Message Date
Jouni Malinen
cf0b9c86c5 tests: 4-way exchange using external EAPOL I/O
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
9d4ff04af3 Add external EAPOL transmission option for testing purposes
The new ext_eapol_frame_io parameter can be used to configure hostapd
and wpa_supplicant to use control interface for receiving and
transmitting EAPOL frames. This makes it easier to implement automated
test cases for protocol testing. This functionality is included only in
CONFIG_TESTING_OPTIONS=y builds.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Sunil Dutt
61fc90483f P2P: Handle improper WPS termination on GO during group formation
A P2P Client may be able to connect to the GO even if the WPS
provisioning step has not terminated cleanly (e.g., P2P Client does not
send WSC_Done). Such group formation attempt missed the event
notification about started group on the GO and also did not set the
internal state corresponding to the successful group formation.

This commit addresses the missing part by completing GO side group
formation on a successful first data connection if WPS does not complete
cleanly. Also, this commit reorders the STA authorization indications to
ensure that the group formation success notification is given prior to
the first STA connection to handle such scenarios.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 18:40:57 +03:00
Jouni Malinen
58b40fdbfd P2P: Clear p2p_go_group_formation_completed on GO start
Previously, this variable did not necessarily get cleared between group
formations and could result in some of the workaround operations from
not being executed after the first group formation when using the same
interface for all P2P groups. Fix this by clearing the variable whenever
starting the GO to make sure it is used consistently for each group
formation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-10 15:53:22 +03:00
Jouni Malinen
c155305fd3 Complete sme-connect radio work when clearing connection state
It was possible for local deauthentication request to leave sme-connect
radio work running even when there was no ongoing effort to complete the
connection anymore. Clean this up by marking sme-connect radio work
item, if any, done when clearing connection state after such
disconnection during connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 01:33:58 +03:00
Jouni Malinen
debb2dacac P2P: Report group removal reason PSK_FAILURE in timeout case
It was possible for group formation timeout to be the trigger for
detecting the second PSK/4-way handshake failure. If that happened, the
special reason=PSK_FAILURE was not used in the P2P-GROUP-REMOVED event
even though P2P-PERSISTENT-PSK-FAIL did get reported. Fix this special
case by replacing the reason code with PSK_FAILURE if the PSK failure
timeout gets registed as part of the disconnection processing in the
formation timeout handler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 01:31:57 +03:00
Jouni Malinen
64502039c0 tests: Make ap_hs20_session_info more robust
It looks like mac80211 scan-while-associated can now take over 10
seconds with the current wireless-regdb rules for world roaming due to
number of additional DFS channel having been enabled for passive
scanning. This resulted in ap_hs20_session_info failing due to the wait
for the scan result event timing out. That is not really a real failure,
so increase the timeout to avoid reporting this incorrectly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-10 00:37:07 +03:00
Jouni Malinen
51465a0b5c The master branch is now used for v2.4 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-09 20:36:53 +03:00
Jouni Malinen
724fce8fff Change version information for the 2.3 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-09 17:41:31 +03:00
Jouni Malinen
5cb1440361 Update ChangeLog files for v2.3
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-09 17:41:31 +03:00
Jouni Malinen
2b28ef6ca8 browser-wpadebug: Use more robust mechanism for starting browser
Use os_exec() to run the external browser to avoid undesired command
line processing for control interface event strings. Previously, it
could have been possible for some of the event strings to include
unsanitized data which is not suitable for system() use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
3d8a3ffcf0 browser-android: Use more robust mechanism for starting browser
Use os_exec() to run the external browser to avoid undesired command
line processing for control interface event strings. Previously, it
could have been possible for some of the event strings to include
unsanitized data which is not suitable for system() use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
17dc39a8bc browser-system: Use more robust mechanism for starting browser
Use os_exec() to run the external browser to avoid undesired command
line processing for control interface event strings. Previously, it
could have been possible for some of the event strings to include
unsanitized data which is not suitable for system() use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
5d4fa2a29b hostapd_cli: Use os_exec() for action script execution
Use os_exec() to run the action script operations to avoid undesired
command line processing for control interface event strings. Previously,
it could have been possible for some of the event strings to include
unsanitized data which is not suitable for system() use. (CVE-2014-3686)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
c5f258de76 wpa_cli: Use os_exec() for action script execution
Use os_exec() to run the action script operations to avoid undesired
command line processing for control interface event strings. Previously,
it could have been possible for some of the event strings to include
unsanitized data which is not suitable for system() use. (CVE-2014-3686)

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
89de07a944 Add os_exec() helper to run external programs
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 17:38:25 +03:00
Jouni Malinen
74ed673f33 tests: VHT 80+80 MHz
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 14:27:23 +03:00
Jouni Malinen
4a274f487a DFS: Allow 80+80 MHz be configured for VHT
This allows cases where neither 80 MHz segment requires DFS to be
configured. DFS CAC operation itself does not yet support 80+80, though,
so if either segment requires DFS, the AP cannot be brought up.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 14:25:55 +03:00
Jouni Malinen
bc86d8c158 tests: Fix DFS radar-during-CAC test case
This uses mac80211_hwsim dfs_simulate_radar to get the real kernel side
CAC operation executed and aborted due to radar detection. This allows
another channel to be selected properly through another CAC run.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 02:10:34 +03:00
Jouni Malinen
831cb7af96 tests: Extend DFS testing to include channel switch
Simulate a radar detection event to verify that hostapd switches
channels properly and the station follows the AP to the new channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-09 01:23:21 +03:00
Jouni Malinen
c634d320ef tests: Re-enable DFS connection check
It looks like association with DFS works fine with the current kernel
version, so re-enable this part of the DFS test cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:27:12 +03:00
Jouni Malinen
6259fd814b tests: VHT with 160 MHz channel width
Since this requires a recent CRDA version and updated wireless-regdb, do
not report failures yet (i.e., indicate that the test case was skipped
if AP startup fails).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-08 18:18:39 +03:00
Jouni Malinen
d5fe4e6c18 Reserve QCA vendor specific nl80211 commands 34..49
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-07 20:08:47 +03:00
Jouni Malinen
b1f4015cf5 test-aes: Allow NIST key wrap test vectors to be verified
This allows the aes_wrap() and aes_unwrap() implementation to be
verified against KW_{AE,AD}_{128,192,256}.txt test vectors from
http://csrc.nist.gov/groups/STM/cavp/documents/mac/kwtestvectors.zip

For example:
./test-aes NIST-KW-AE kwtestvectors/KW_AE_128.txt
./test-aes NIST-KW-AE kwtestvectors/KW_AE_192.txt
./test-aes NIST-KW-AE kwtestvectors/KW_AE_256.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_128.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_192.txt
./test-aes NIST-KW-AD kwtestvectors/KW_AD_256.txt

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:10 +03:00
Jouni Malinen
a256506ddc AES: Extend key wrap implementation to support longer data
This extends the "XOR t" operation in aes_wrap() and aes_unwrap() to
handle up to four octets of the n*h+i value instead of just the least
significant octet. This allows the plaintext be longer than 336 octets
which was the previous limit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:10 +03:00
Jouni Malinen
eefec1e40b AES: Extend key wrap design to support longer AES keys
This adds kek_len argument to aes_wrap() and aes_unwrap() functions and
allows AES to be initialized with 192 and 256 bit KEK in addition to
the previously supported 128 bit KEK.

The test vectors in test-aes.c are extended to cover all the test
vectors from RFC 3394.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:06 +03:00
Jouni Malinen
98a1571d88 OpenSSL: Clean up one part from the BoringSSL patch
The (int) typecast I used with sk_GENERAL_NAME_num() to complete the
BoringSSL compilation was not really the cleanest way of doing this.
Update that to use stack_index_t variable to avoid this just like the
other sk_*_num() calls.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 11:49:20 +03:00
Adam Langley
a8572960a9 Support building with BoringSSL
BoringSSL is Google's cleanup of OpenSSL and an attempt to unify
Chromium, Android and internal codebases around a single OpenSSL.

As part of moving Android to BoringSSL, the wpa_supplicant maintainers
in Android requested that I upstream the change. I've worked to reduce
the size of the patch a lot but I'm afraid that it still contains a
number of #ifdefs.

[1] https://www.imperialviolet.org/2014/06/20/boringssl.html

Signed-off-by: Adam Langley <agl@chromium.org>
2014-10-07 01:18:03 +03:00
Dmitry Shmidt
1236eda131 Android: Remove ctrl_interface=wlan0 from config template
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-10-07 00:43:50 +03:00
Dmitry Shmidt
9ffd512924 Android: Set pmf=1 to default template
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2014-10-07 00:43:50 +03:00
Jouni Malinen
b9dee18ffe tests: VENDOR_ELEM_REMOVE of the second IE
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 00:43:50 +03:00
Toby Gray
45d8501555 Fix out of bounds memory access when removing vendor elements
Commit 86bd36f0d5 ("Add generic
mechanism for adding vendor elements into frames") has a minor bug
where it miscalculates the length of memory to move using
os_memmove. If multiple vendor elements are specified then this can
lead to out of bounds memory accesses.

This patch fixes this by calculating the correct length of remaining
data to shift down in the information element.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-07 00:43:47 +03:00
Jouni Malinen
a61fcc131a Clean up authenticator PMKSA cache implementation
This makes the implementation somewhat easier to understand.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
cb129db34c Clear PMKSA cache entry data when freeing them
Avoid leaving the PMK information unnecessarily in memory.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
8c8d26aada Remove unnecessary PMKSA cache freeing step
_pmksa_cache_free_entry() is a static function that is never called with
entry == NULL, so there is no need to check for that.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
5b7aeddcd7 tests: OKC with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
9c829900bb Fix authenticator OKC fetch from PMKSA cache to avoid infinite loop
If the first entry in the PMKSA cache did not match the station's MAC
address, an infinite loop could be reached in pmksa_cache_get_okc() when
trying to find a PMKSA cache entry for opportunistic key caching cases.
This would only happen if OKC is enabled (okc=1 included in the
configuration file).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
35a7646bb1 tests: PMKSA cache with multiple stations
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
2cde175a93 tests: PMKSA cache entry timeout based on Session-Timeout
This verifies that hostapd uses Session-Timeout value from Access-Accept
as the lifetime for the PMKSA cache entries and expires entries both
while the station is disconnected and during an association.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
47ea24c13d Fix PMKSA cache timeout from Session-Timeout in WPA/WPA2 cases
Previously, WPA/WPA2 case ended up using the hardcoded
dot11RSNAConfigPMKLifetime (43200 seconds) for PMKSA cache entries
instead of using the Session-Timeout value from the RADIUS server (if
included in Access-Accept). Store a copy of the Session-Timeout value
and use it instead of the default value so that WPA/WPA2 cases get the
proper timeout similarly to non-WPA/WPA2 cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Jouni Malinen
8e1fc78e1f tests: PMKSA caching disabled on AP
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 23:01:08 +03:00
Janusz Dziedzic
dc152f32b4 wpa_supplicant: Enable HT for IBSS
Enable HT20 for IBSS when HT is supported by the driver.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-10-04 18:54:22 +03:00
Janusz Dziedzic
4ec68377ef wpa_supplicant: Use hostapd_freq_params in assoc_params
Use hostapd_freq_params instead of simple frequency parameter for driver
commands. This is preparation for IBSS configuration to allow use of
HT/VHT in IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-10-04 18:43:42 +03:00
Jouni Malinen
43f02e6ad7 wpa_ctrl: Update wpa_ctrl_recv() documentation for non-block behavior
Commit 4fdc8def88 changed the wpa_ctrl
socket to be be non-blocking, so the comment about wpa_ctrl_recv()
blocking is not valid anymore.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 18:32:57 +03:00
Tomasz Bursztyka
1274ec2329 dbus: Add an interface configuration entry to set the WPS methods
It is thus possible to restrain WPS methods to prefered ones, like PBC
only, etc.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-10-04 18:29:33 +03:00
Jouni Malinen
393869c551 tests: External MAC address change
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:41:33 +03:00
Dan Williams
3e0272ca00 nl80211: Re-read MAC address on RTM_NEWLINK
Commit 97279d8d (after hostap-2.0) dropped frame events from foreign
addresses. Unfortunately this commit did not handle the case where the
interface's MAC address might be changed externally, which other
wpa_supplicant code already handled. This causes the driver to reject
any MLME event because the address from the event doesn't match the
stale address in the driver data.

Changing an interface's MAC address requires that the interface be
down, the change made, and then the interface brought back up. This
triggers an RTM_NEWLINK event which driver_nl80211.c can use to
re-read the MAC address of the interface.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2014-10-04 16:41:20 +03:00
Jouni Malinen
5dfbd725a9 nl80211: Add get_bss_ifindex() helper
This can be used to fetch a BSS entry based on interface index.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-04 16:21:03 +03:00
Jouni Malinen
f1a613118e P2P: Use only the -m config for P2P management device
Previously, the case of non-netdev P2P management device ended up
pulling in both the main interface (e.g., wlan0) and P2P Device
interface (from command line -m argument) as configuration. Similarly,
the main interface ended up included both configuration files. This is
not really helpful for various use cases, e.g., when permanent P2P group
information is stored in the P2P Devince interface, but it gets
duplicated in the main station interface configuration.

Clean this up by changing the -m<file> argument to replace, not
concatenate, configuration information. In other words, the main station
interface will not read this configuration and the P2P Device interface
(non-netdev) does not read parameters from the station interface
configuration file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-03 22:50:21 +03:00
Jouni Malinen
c4a8c173b8 Revert "tests: Skip ap_wpa2_tdls_concurrent_init on failure"
This reverts commit bf700cc3d2. The
concurrent initialization test case is now expected to work again with
the STA entry added early enough to avoid the recently added mac80211
validation step failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-03 11:53:38 +03:00