Commit graph

7615 commits

Author SHA1 Message Date
Eliad Peller
04ee647d58 HT: Let the driver advertise its supported SMPS modes for AP mode
Add smps_modes field, and let the driver fill it with its supported SMPS
modes (static/dynamic). This will let us start an AP with specific SMPS
mode (e.g., dynamic) that will allow it to reduce its power usage.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2014-10-24 01:25:29 +03:00
Tomasz Bursztyka
eac687ee7d dbus: Do a full P2P find as it is in ctrl_iface.c
So the behavior is consistent whatever interface is in use.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2014-10-24 00:57:45 +03:00
Jouni Malinen
4db207518d P2P: Stop TX wait on SD query TX status failure
The previous TX operation could be on another channel if there are
multiple peers with pending SD queries. To avoid failing to send the
following query, stop the last one to allow any Listen channel to be
used for the following query during p2p_find iteration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 21:52:05 +03:00
Jouni Malinen
44abecbf02 P2P: Limit number of SD retries during find
Commit 7139cf4a4f ('P2P: Decrement
sd_pending_bcast_queries when sd returns success') added support for
retrying P2P SD queries. However, it did this without limiting how many
retries are allowed. This can result in excessive number of retries if a
peer device does not show up on its Listen channel and there is a
pending SD query to it. Limit the maximum number of SD retries to 100
per p2p_find operation for each peer to avoid unlimited retries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 21:51:48 +03:00
Jouni Malinen
e706b8c8e5 P2P: Iterate through all peers in pending pre-find operation
Commit 7139cf4a4f ('P2P: Decrement
sd_pending_bcast_queries when sd returns success') changed P2P SD
behavior in a way that the P2P search loop ended up in continuing with
the first peer entry until it acknowledged receipt of a pending
broadcast SD request while the previous design went through all peers
once. While it is reasonable to retry SD, getting stuck with the first
peer is not really desirable. Change the p2p_continue_find() loop to
continue from the next peer in each iteration to allow progress through
all peers that have pending operations if any other peer is not
acknowledging frames (e.g., due to not being on Listen channel).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 21:30:32 +03:00
Chet Lanctot
b41f26845a Add support for offloading key management operations to the driver
This commit introduces a QCA vendor command and event to provide an
option to use extended versions of the nl80211 connect/roam operations
in a way that allows drivers to offload key management operations to the
driver/firmware.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 18:38:50 +03:00
Jouni Malinen
fbb79f94eb tests: Allow time for go_neg_pbc() GO Neg Resp to go out
It was possible for the not-pre-authorized GO Negotiation case to end up
starting new GO Negotiation before the GO Negotiation Response frame
with status=1 was transmitted. While this works for group formation, it
could reduce test coverage for the common case where that response is
received. At a small sleep to make it less likely for this unexpected
sequence to happen during testing.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-23 16:33:25 +03:00
Jouni Malinen
7475d299ab P2P: Search all 2.4 GHz social channels regardless of disallow_freq
Commit 1595eb93ae ('P2P: Add support for
60 GHz social channel') had an unintended change to how P2P search scans
2.4 GHz social channels. Use of p2p_supported_freq() to filter the list
of social channels ended up using the disallow_freq setting to remove
social channels from the P2P search scans. This is not desired since
peers need to be found on any of the social channels even if those
channels have been disabled from P2P operating channel use. Restore the
previous behavior by included all the 2.4 GHz social channels in P2P
search scans if the driver indicated support for the 2.4 GHz band.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-22 20:02:48 +03:00
Jouni Malinen
a6b1215769 GAS: Do not reply to P2P SD query from generic GAS/ANQP server
This avoids an issue where a wpa_supplicant build with CONFIG_P2P=y and
CONFIG_HS20=y ended up processing a P2P SD query twice when operating as
a GO and sending out two replies. Only the P2P SD implementation should
reply to P2P SD query in such a case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-22 19:21:42 +03:00
Johannes Berg
97752f7930 Revert "nl80211: Do not indicate P2P_DEVICE support by default"
This reverts commit 851b0c5581.

The kernel now has full support for this (and it is turned off
by default for hwsim) so wpa_supplicant should really go back
to autodetecting this so clients don't have to figure out what
to do.

Also add a debug message stating that P2P_DEVICE support is used.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:54:02 +03:00
Johannes Berg
1e3c7e82b5 tests: Disable support_p2p_device by default
When loading the hwsim module, disable support_p2p_device by default.
This will also become the default in the kernel, but until then it
makes sure it's not turned on by default.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:52 +03:00
Johannes Berg
5a8d165cd8 tests: Use dynamic radio for P2P_DEVICE tests
Use dynamic radios for P2P_DEVICE tests to be able to test
support when the default in hwsim is to not support it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-22 10:53:45 +03:00
Jouni Malinen
9b2c227216 tests: Run run-tests.py as root from run-all.sh
This will be needed to be able to control dynamic mac80211_hwsim
operations like adding and removing a phy. In the past, it has been
possible to start the main programs as root and then use non-root
account for run-tests.py. However, there is already a large number of
cases within the test scripts where sudo is needed. Moving that
requirement to execution of run-tests.py allows those to be simplified
as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-22 10:50:57 +03:00
Jouni Malinen
81ea400d37 tests: P2P SD with GO
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
ccf79ab256 browser-android: Use execv() directly instead of os_exec()
This allows the URL to be passed as a single argument to the program
instead of getting split into multiple by os_exec(). This makes the
operation more robust for cases where the URL could have been received
from an external source and could potentially add extra arguments to the
command line.

In addition, fix the /system/bin/input execution by using system() for
it instead of execv() through os_exec(). /system/bin/input is a script
that execv() won't be able to run. Since the full command line is
specified, system() can be used for this. The keycode is also changed
from 3 to KEYCODE_HOME to make this work with current Android version.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
c94382259d browser-wpadebug: Use execv() directly instead of os_exec()
This allows the URL to be passed as a single argument to the program
instead of getting split into multiple by os_exec(). This makes the
operation more robust for cases where the URL could have been received
from an external source and could potentially add extra arguments to the
command line.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
22444bb246 browser-system: Use execv() directly instead of os_exec()
This allows the URL to be passed as a single argument to the program
instead of getting split into multiple by os_exec(). This makes the
operation more robust for cases where the URL could have been received
from an external source and could potentially add extra arguments to the
command line.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:17 +03:00
Jouni Malinen
4181c3964d tests: BSS Load updates
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-10-21 23:32:11 +03:00
Kyeyoon Park
ec8f36afca AP: Add support for BSS load element (STA Count, Channel Utilization)
The new "bss_load_update_period" parameter can be used to configure
hostapd to advertise its BSS Load element in Beacon and Probe Response
frames. This parameter is in the units of BUs (Beacon Units).

When enabled, the STA Count and the Channel Utilization value will be
updated periodically in the BSS Load element. The AAC is set to 0 sinze
explicit admission control is not supported. Channel Utilization is
calculated based on the channel survey information from the driver and
as such, requires a driver that supports providing that information for
the current operating channel.

Signed-off-by: Kyeyoon Park <kyeyoonp@qca.qualcomm.com>
2014-10-21 23:25:48 +03:00
Johannes Berg
8a5cc2fe38 tests: Introduce hwsim radio context manager
The new HWSimRadio context manager allows the following
syntax to create (and appropriately destroy) a new radio:

  with HWSimRadio([...]) as (radio_id, iface_name):
    [...]

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Johannes Berg
91d7a9a1c5 tests: Allow creating radio with p2p-device support
For testing P2P-Device support properly, allow dynamically
creating radios with support for it in hwsim.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-21 17:35:20 +03:00
Jouni Malinen
c3c4b3ed3b P2P: Support dynamic addition of P2P Device triggering interface
This moves the addition of P2P Device interface into
wpa_supplicant_add_iface() so that this operation can be done
dynamically when adding an interface to an already running
wpa_supplicant process.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-21 17:35:19 +03:00
Jouni Malinen
26fc96e89b P2P: Remove all child interfaces when removing the parent
This is needed to allow dynamic removal of an interface that adds the
P2P Device interface without leaving behind the management interface
with invalid wpa_s->parent pointer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-21 17:35:15 +03:00
Jouni Malinen
eb92d389a8 tests: Remove wlan5-related interfaces based on list
Instead of hardcoding reset_devs() to remove wlan5, remove all wlan*
interfaces renaming in the wpa_supplicant process to support the case of
dynamically added hwsim phy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
5f797376f2 tests: Make RELOG command use global control interface
This allows RELOG to be used even if a wpa_supplicant process does not
have any interfaces configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-20 12:52:25 +03:00
Jouni Malinen
ce9c8c4097 tests: Use internal DATA_TEST_* functionality instead of hwsim_test
This replaces use of the external hwsim_test tool for most data
connectivity test cases. Only the cases where a special interface
(bridge/VLAN) is used are still executed through hwsim_test.

The internal DATA_TEST_* functionality makes it easier to extend the
connectivity test cases through an external device with real WLAN
hardware instead of the hwsim test setup. In addition, the error reports
from this code can be made more informative.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
4823566ca7 tests: Add WpaSupplicant.wait_group_event()
This can be used to wait for events from a P2P group interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
f6420942cb tests: Add own_addr() for both Hostapd and WpaSupplicant classes
This makes it easier to use instances of control interfaces in common
code without having to separately address hostapd and wpa_supplicant
behavior differences.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 22:27:37 +03:00
Jouni Malinen
4a6cc86272 Add data test functionality
It is now possible to run hwsim_test like data connectivity test through
wpa_supplicant/hostapd control interface if CONFIG_TESTING_OPTIONS=y is
used for the build. Test functionality is enabled/disabled at runtime
with "DATA_TEST_CONFIG <1/0>". The "DATA_TEST_TX <dst> <src> <tos>"
command can be used to request a test frame to be transmitted.
"DATA-TEST-RX <dst> <src>" event is generated when the test frame is
received.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 20:51:45 +03:00
Jouni Malinen
a8375c94c0 tests: Pass wpas/hapd instance to test_connectivity()
This makes it easier to replace data connectivity testing to use
something else than local hwsim_test binary on the controller device.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 17:54:49 +03:00
Luciano Coelho
5d7746b589 tests: Add test cases for AP channel switch announcement
Signed-hostap: Luciano Coelho <luciano.coelho@intel.com>

Skip CSA tests if the driver doesn't support this in AP mode.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 16:04:31 +03:00
Andrei Otcheretianski
d66873f5cf Do not start CSA flow when CSA is not supported by the driver
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2014-10-19 15:39:59 +03:00
Jouni Malinen
2d6ee86f9b HS 2.0R2: Write OSEN key_mgmt value to config file
This was forgotten when the parser for key_mgmt=OSEN was added.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 12:58:13 +03:00
Thomas Pedersen
d3fd563f46 Write SAE and FT-SAE key_mgmt to config
This was forgotten when the key_mgmt parser for SAE and FT-SAE was
added.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Thomas Pedersen <thomas@noack.us>
2014-10-19 12:58:13 +03:00
Bob Copeland
a52024c976 nl80211: Add new peer candidate event for mesh
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
7e31703e4d nl80211: Add support for sta_add flags_mask
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
6c1664f605 nl80211: Add new commands to support mesh interfaces
Create init_mesh, mesh_join, and mesh_leave actions to kernel.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Bob Copeland
24bd4e0be5 nl80211: Add driver flag to indicate mesh support
Convert the driver flags variable to u64 since there was no room for
more flags.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:58:13 +03:00
Jouni Malinen
a709c5e29f Add a test vector for AES-SIV
This verifies that the AES-SIV implementation results matches RFC 5297
test vector A.1.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 12:43:40 +03:00
Bob Copeland
f7072600be Implement RFC 5297 AES-SIV
Add an implementation of Synthetic Initialization Vector (SIV)
Authenticated Encryption Using the Advanced Encryption Standard (AES).

This mode of AES is used to protect peering frames when using
the authenticated mesh peering exchange.

Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 12:43:38 +03:00
Bob Copeland
6293f9ed07 mesh: Parse mesh-related information elements
Add support for parsing mesh id, mesh config, mesh peering,
AMPE and MIC information elements.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
2014-10-19 11:20:05 +03:00
Thomas Pedersen
3e7b032f83 mesh: Add mesh protocol definitions
Signed-off-by: Javier Lopez <jlopex@gmail.com>
Signed-off-by: Jason Mobarak <x@jason.mobarak.name>
Signed-hostap: Thomas Pedersen <thomas@noack.us>
2014-10-19 11:20:05 +03:00
Jouni Malinen
71c41d45af tests: Provide more details of parallel testing with curses UI
This extends parallel-vm.py to show more details about testing progress
from each VM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-19 11:19:49 +03:00
Jouni Malinen
9c2d2378ba tests: P2P re-invocation with p2p_add_cli_chan=1
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 17:00:57 +03:00
Mikael Kanstrup
a0a5f73e62 P2P: Include passive channels in invitation response
Patch 51e9f22809 added the option
p2p_add_cli_chan to allow P2P GC to connect on passive channels
assuming the GO should know whether allowed to send on these channels.
This patch adds missing cli_channels to invitation response messages
to allow re-connecting to a persistent group as GC on passive
channels.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2014-10-18 17:00:57 +03:00
Toby Gray
fd1776536b tests: Removing a P2P group via the group control interface
This adds a test which attempts to use the control interface for the
P2P group to remove the P2P group.

Signed-off-by: Toby Gray <toby.gray@realvnc.com>
2014-10-18 16:22:25 +03:00
Jouni Malinen
f2b3acc9d7 P2P: Fix group interface removal through interface ctrl_iface
It was possible to issue the P2P_GROUP_REMOVE command through the
per-interface control interface. This resulted in freed memory getting
accessed when trying to send the control interface response to the
operation that ended up deleting the group interface. Fix this by
postponing the removal operation until the caller has returned.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 16:22:25 +03:00
Jouni Malinen
19d3a6e364 tests: SAE PMKSA caching
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:03:17 +03:00
Jouni Malinen
bc26ac50dd SAE: Add support for PMKSA caching on the station side
This makes wpa_supplicant SME create PMKSA cache entries from SAE
authentication and try to use PMKSA caching if an entry is found for the
AP. If the AP rejects the attempt, fall back to SAE authentication is
used.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:02:02 +03:00
Jouni Malinen
f299117093 SAE: Add support for PMKSA caching on the AP side
This makes hostapd create PMKSA cache entries from SAE authentication
and allow PMKSA caching to be used with the SAE AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-18 13:00:29 +03:00