Commit graph

204 commits

Author SHA1 Message Date
Jouni Malinen
567da5bbd0 DPP: Add new AKM
This new AKM is used with DPP when using the signed Connector to derive
a PMK. Since the KCK, KEK, and MIC lengths are variable within a single
AKM, this needs number of additional changes to get the PMK length
delivered to places that need to figure out the lengths of the PTK
components.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:17 +03:00
Jouni Malinen
dd4722df9b wlantest: Fix pcapng writer to include decrypted EAPOL-Key Key Data
This was only written to pcapng files if both pcap and pcapng writing
was requested. Fix this for the case where only a pcapng file is being
written.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-26 21:13:21 +03:00
Jouni Malinen
faf0fef1dc wlantest: Fix EAPOL-Key Key Data padding removal
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:19 +03:00
Jouni Malinen
f58afccddd wlantest: Add initial support for FT-EAP decryption
Add second half of MSK as XXKey for FT-EAP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:17 +03:00
Jouni Malinen
19e7ddf7fb wlantest: Fix EAPOL buffer length with variable MIC length
struct wpa_eapol_key does not include the MIC field anymore, so need to
add it explicitly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-26 21:13:10 +03:00
Johannes Berg
a1f11e34c4 Use os_memdup()
This leads to cleaner code overall, and also reduces the size
of the hostapd and wpa_supplicant binaries (in hwsim test build
on x86_64) by about 2.5 and 3.5KiB respectively.

The mechanical conversions all over the code were done with
the following spatch:

    @@
    expression SIZE, SRC;
    expression a;
    @@
    -a = os_malloc(SIZE);
    +a = os_memdup(SRC, SIZE);
    <...
    if (!a) {...}
    ...>
    -os_memcpy(a, SRC, SIZE);

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-07 13:19:10 +02:00
Jouni Malinen
95de34a10a Remove trailing whitespace
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-12-28 14:31:42 +02:00
Jouni Malinen
555ff857dd wlantest: Recognize EAPOL-Key frames without MIC bit for FILS
The new AEAD AKM option in FILS sets the MIC bit in EAPOL-Key frames to
0 for some ciphers, so the determination of EAPOL-Key frame types needs
changes to work with these cases.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:46 +03:00
Jouni Malinen
6d014ffc6e Make struct wpa_eapol_key easier to use with variable length MIC
Suite B 192-bit addition from IEEE Std 802.11ac-2013 replaced the
previous fixed length Key MIC field with a variable length field. That
change was addressed with an addition of a new struct defined for the
second MIC length. This is not really scalable and with FILS coming up
with a zero-length MIC case for AEAD, a more thorough change to support
variable length MIC is needed.

Remove the Key MIC and Key Data Length fields from the struct
wpa_eapol_key and find their location based on the MIC length
information (which is determined by the AKMP). This change allows the
separate struct wpa_eapol_key_192 to be removed since struct
wpa_eapol_key will now include only the fixed length fields that are
shared with all EAPOL-Key cases in IEEE Std 802.11.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-10 21:11:46 +03:00
Jouni Malinen
e2991ee580 Move CRC-32 routine from wlantest to src/utils
This allows the CRC-32 routine to be shared for other purposes in
addition to the WEP/TKIP/FCS within wlantest.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-09 17:13:23 +03:00
Jouni Malinen
0df12cbddc IEEE P802.11ah/D10.0 PV1 CCMP test vectors
Extend wlantest test_vectors to calculate test vectors for P802.11ah
Annex J.6.4.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-09-23 17:49:33 +03:00
Jouni Malinen
6d07e76020 wlantest: Use local ETH_P_IP define instead of linux/if_ether.h
There is no strong need for pulling in linux/if_ether.h here since all
that is needed if ETH_P_IP and we already cover multiple other ETH_P_*
values in utils/common.h.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-03-26 11:35:30 +02:00
Jouni Malinen
9231c2476f wlantest: Fix bip_protect() memory allocation
The addition operator is of higher precedence than the ternary
conditional and the construction here needs to use parentheses to
calculate the buffer length properly when generating test frames with
BIP protection.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-03-14 18:42:46 +02:00
Jouni Malinen
e929eb39d6 wlantest: Add -N command line argument to remove write buffering
This makes it easier to do live parsing of captured pcap files from
wlantest without having to rename and restart the capture file. Packet
writes are flushed to disk after each packet if -N is included in the
command line.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-11-27 00:10:53 +02:00
Jouni Malinen
3fb62bdae9 wlantest: Add support for FT-PSK initial association key derivation
This adds minimal support for deriving keys for FT-PSK to allow the
initial mobility domain association to be analyzed in more detail.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-08-06 20:47:25 +03:00
Jouni Malinen
7d2736795a wlantest: Fix a copy-paste error in a debug message
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-05-24 13:44:42 +03:00
Mikael Kanstrup
8b423edbd3 Declare all read only data structures as const
By analysing objdump output some read only structures were found in
.data section. To help compiler further optimize code declare these
as const.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-04-25 17:33:06 +03:00
Jouni Malinen
b39a05913a Simplify Timeout Interval element parsing
Remove the length field from struct ieee802_11_elems since the only
allowed element length is five and that is checked by the parser.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 22:05:11 +03:00
Jouni Malinen
d4c4ec9240 wlantest: Verify FTIE length before checking MIC
tdls_verify_mic() and tdls_verify_mic_teardown() could have tried to
read the 16-octet FTIE MIC when processing a TDLS frame even if the
received FTIE is truncated. At least in theory, this could result in
reading couple of octets beyond the frame buffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:19 +03:00
Jouni Malinen
762a0bfb01 wlantest: Fix Beacon and Probe Response frame parser
These functions did not verify that the received frame is long enough to
contain the beginning of the variable length IE area. A truncated frame
could have caused a segmentation fault due to reading beyond the buffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-04-22 11:44:19 +03:00
Jouni Malinen
5e3b5197cc Add Suite B 192-bit AKM
WPA-EAP-SUITE-B-192 can now be used to select 192-bit level Suite B into
use as the key management method.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:43:52 +02:00
Jouni Malinen
98cd3d1c3b Preparations for variable length KCK and KEK
This modifies struct wpa_ptk to allow the length of KCK and KEK to be
stored. This is needed to allow longer keys to be used, e.g., with
Suite B 192-bit level.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-27 01:26:49 +02:00
Jouni Malinen
0e1aa64dba wlantest: Extend BIP validation to support GMAC-128 and GMAC-256
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-24 19:37:42 +02:00
Jouni Malinen
cd3b5cc079 wlantest: New mgmt_group_cipher values for BSS info and debug log
This adds BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256 to info_bss
command and debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-24 19:37:42 +02:00
Jouni Malinen
cb80fadaa7 wlantest: Extend BIP support to cover BIP-CMAC-256
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-01-24 19:37:42 +02:00
Jouni Malinen
010fa245bd Add QUIET=1 option for make
This can be used to reduce verbosity for build messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-29 15:49:05 +02:00
Jouni Malinen
a193231dfb Clean up debug prints to use wpa_printf()
This converts most of the remaining perror() and printf() calls from
hostapd and wpa_supplicant to use wpa_printf().

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-12-26 13:20:57 +02:00
Jouni Malinen
929a2ea5df Suite B: Select EAPOL-Key integrity and key-wrap algorithms based on AKM
This adds support for AKM 00-0F-AC:11 to specify the integrity and
key-wrap algorithms for EAPOL-Key frames using the new design where
descriptor version is set to 0 and algorithms are determined based on
AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 17:09:11 +02:00
Jouni Malinen
666497c8e6 Suite B: Add AKM 00-0F-AC:11
This adds definitions for the 128-bit level Suite B AKM 00-0F-AC:11. The
functionality itself is not yet complete, i.e., this commit only
includes parts to negotiate the new AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-16 13:20:51 +02:00
Jouni Malinen
eefec1e40b AES: Extend key wrap design to support longer AES keys
This adds kek_len argument to aes_wrap() and aes_unwrap() functions and
allows AES to be initialized with 192 and 256 bit KEK in addition to
the previously supported 128 bit KEK.

The test vectors in test-aes.c are extended to cover all the test
vectors from RFC 3394.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-10-07 14:57:06 +03:00
Ashok Kumar Ponnaiah
eb2223e0ec wlantest: Add decryption of CCMP-256, GCMP, GCMP-256
This extends wlantest support for decrypting the new cipher suites.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Ashok Kumar Ponnaiah
3a3cb8ee81 wlantest: Indicate if a TKIP/CCMP replay has Retry=1
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Ashok Kumar Ponnaiah
fa6fff1893 wlantest: Recognize CCMP-256, GCMP, and GCMP-256 ciphers
This adds support for displaying whether a BSS or STA is using one of
the newer cipher suites.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-09-03 15:41:35 +03:00
Jouni Malinen
f6ff5160f0 wlantest: Add support for OSEN
This allows Hotspot 2.0 OSEN connection to be analyzed more
conveniently. The frames from an OSEN association can now be decrypted
using an MSK file.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-05-15 16:56:59 +03:00
Johannes Berg
30476e4fe7 wlantest: Tag and ignore generated packets
Rather than ignoring packets with a minimal 8-byte radiotap
header, which may occur elsewhere, tag generated (decrypted)
packets with an empty vendor namespace tag and ignore those.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:54:25 +03:00
Johannes Berg
bacb984b2d radiotap: Update radiotap parser to library version
Update the radiotap parser to the latest version of the
http://git.sipsolutions.net/radiotap.git/ library to get
parsing for vendor namespaces.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-13 23:49:59 +03:00
Jouni Malinen
0187c41d88 Declare wpa_debug_* variables in src/utils/wpa_debug.h
These were somewhat more hidden to avoid direct use, but there are now
numerous places where these are needed and more justification to make
the extern int declarations available from wpa_debug.h. In addition,
this avoids some warnings from sparse.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-31 19:29:52 +02:00
Jouni Malinen
ae98e1f5b2 wlantest: Add a BSS probe_response counter
This can be used to verify whether an AP replies to a Probe Request
frame.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-26 13:37:06 +02:00
Jouni Malinen
99d7c1dedf wlantest: Add per-TID RX/TX counters
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-12-24 20:21:27 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Jouni Malinen
c41e1d7cac wlantest: Add more pcapng notes on EAPOL processing
Some of the MIC validation steps were not logged in the pcapng notes.
Add these to make the entries more consistent and to provide more
information to ease debugging.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:43:11 +02:00
Jouni Malinen
a0530dff5b wlantest: Allow additional PTKs to be specified from a file
A text file with a hexdump of PTK (KCK|KEK=TK with 48 octets for CCMP or
64 octets for TKIP or alternative 16 or 32 octet TK for CCMP/TKIP) can
now be read from a file specified with the -T command line argument. If
the current known PTK fails to decrypt a frame (or if no current PTK is
known) all listed PTKs are iterated to see if any of them matches.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:09:38 +02:00
Jouni Malinen
de8bb171f6 wlantest: Add support for debug log timestamps
The new command line argument -t can now be used to request wlantest to
include a timestamp in the log entries.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:45:32 +02:00
Jouni Malinen
d33fef57a4 wlantest: Add support for log output into a file
This allows wlantest debug log output to be directed to a file so that
RELOG command can be used to rotate files more easily than stdout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:40:17 +02:00
Jouni Malinen
c99a721e5b wlantest: Add RELOG command to reopen log/capture files
This can be used similarly to the wpa_supplicant RELOG command to
rotate log and capture files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:39:22 +02:00
Jouni Malinen
0e91337d54 Validate P802.11ac test vector result
Verify the expected value against P802.11ac/D7.0 CCMP-256, GCMP-256,
BIP-GMAC-128, and BIP-GMAC-256 test vectors.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:55:38 +02:00
Jouni Malinen
84a65fd6a3 Extend GCMP test vectors to include both MPDUs
IEEE Std 802.11ad-2012 includes two test vectors for GCMP. Verify both
of those and also verify that the results match the values in the
standard instead of just verifying that decrypted frame matches
original.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:34:01 +02:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Johannes Berg
de36e348f9 wlantest: Always write radiotap pcap-ng
When writing pcap-ng files, always include a radiotap
header even if there wasn't one in the input. For now
just drop prism headers, I don't have any to test.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-06-22 13:17:14 +03:00
Jouni Malinen
3b5a1a7769 wlantest: Recognize hwsim_test packets
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-05-26 22:19:52 +03:00