Commit graph

15329 commits

Author SHA1 Message Date
Jouni Malinen
85e64e634d SAE: Add sae_pwe configuration parameter for wpa_supplicant
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
a36e13a7cd SAE: Add sae_pwe configuration parameter for hostapd
This parameter can be used to specify which PWE derivation mechanism(s)
is enabled. This commit is only introducing the new parameter; actual
use of it will be address in separate commits.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
af4487148a tests: Module test for SAE hash-to-element crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
cf84246ebb SAE: Add Rejected Groups element into H2E Commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:22 +03:00
Jouni Malinen
efd4285299 SAE: Hash algorithm selection for H2E KCK/CN()
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:39:19 +03:00
Jouni Malinen
aeb022f8e5 SAE: Implement hash-to-element PT/PWE crypto routines
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-15 15:01:53 +03:00
Jouni Malinen
ecd7114072 SAE: Parse Rejected Groups element from H2E SAE commit
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
86f6084862 SAE: Tell sae_parse_commit() whether H2E is used
This will be needed to help parsing the received SAE commit.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
316156739c SAE: H2E protocol defines
These are the defined values/identifiers for SAE hash-to-element
mechanism from IEEE P802.11-REVmd/D3.0.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
1766e608ba wolfSSL: Fix crypto_bignum_sub()
The initial crypto wrapper implementation for wolfSSL seems to have
included a copy-paste error in crypto_bignum_sub() implementation that
was identical to crypto_bignum_add() while mp_sub() should have been
used instead of mp_add().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
2a1c84f4e5 crypto: Add more bignum/EC helper functions
These are needed for implementing SAE hash-to-element.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-14 19:38:41 +03:00
Jouni Malinen
960cfee506 tests: PMF AP sending valid deauth/disassoc without dropping SA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 18:18:43 +03:00
Jouni Malinen
34a9cd8ffa tests: WPA2-PSK PMF AP dropping SA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 17:53:04 +03:00
Jouni Malinen
131c2600f4 tests: sigma_dut DPP TCP Enrollee as initiator
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:27:49 +03:00
Jouni Malinen
377d5f7cc2 tests: sigma_dut DPP TCP Configurator (Controller) as responder
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:07:39 +03:00
Jouni Malinen
9c08bfbd91 DPP: Fix confusing debug entry from Configurator
The logic for displaying the message about no configuration being
available for the Enrollee was reversed when support for multiple Config
Objects was added. This was supposed to be shown only if the first
Config Object fails (i.e., when no configuration is available); not when
second attempt fails (since the first one had already been successful in
that case).

Fixes: 7eb06a3369 ("DPP2: Allow multiple Config Objects to be build on Configurator")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-11 13:04:42 +03:00
Jouni Malinen
d905c8f7a7 tests: sigma_dut controlled SAE association with PMKID
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 16:21:10 +03:00
Jouni Malinen
4dda07ba98 tests: sigma_dut controlled AP with SAE Confirm immediate
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:56:01 +03:00
Jouni Malinen
8a9658dbb5 tests: SAE and AP sending Confirm message without waiting STA
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:42:11 +03:00
Jouni Malinen
f7fe055224 SAE: Allow AP behavior for SAE Confirm to be configured
hostapd is by default waiting STA to send SAE Confirm before sending the
SAE Confirm. This can now be configured with sae_confirm_immediate=1
resulting in hostapd sending out SAE Confirm immediately after sending
SAE Commit.

These are the two different message sequences:

sae_confirm_immediate=0
STA->AP: SAE Commit
AP->STA: SAE Commit
STA->AP: SAE Confirm
AP->STA: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

sae_confirm_immediate=1
STA->AP: SAE Commit
AP->STA: SAE Commit
AP->STA: SAE Confirm
STA->AP: SAE Confirm
STA->AP: Association Request
AP->STA: Association Response

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-10 15:38:26 +03:00
Jouni Malinen
d6a7de60c8 wpa_cli: Clean up unnecessarily complex CONFIG_MESH use
There is no need for #ifdef/#else/#endif construction in
network_fields[] to cover "mode" (which is completely independent of
CONFIG_MESH) or two separate conditional blocks for mesh related network
fields, so move these into a single conditionally included block.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
8b426ab1e7 wpa_supplicant: Pass AP mode EDMG config to hostapd struct
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
a82aee1f40 wpa_supplicant: Add support for EDMG channels
As part of a connection request, set EDMG parameters for the driver to
use in the association. The EDMG parameters are based on EDMG IE
received from the AP's Probe Response frames, the driver's EDMG
capability, and the EDMG configuration from the configuration.

As part of starting an AP, set EDMG parameters for the driver to use for
AP operation. The EDMG parameters are based on the driver's EDMG
capability and the EDMG configuration from the configuration.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent, i.e., the supported values for
edmg_channel are 9..13.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
35aed771f9 Indicate EDMG in scan results
Add [EDMG] flag to scan results.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
f6f8c6ade9 AP: Show EDMG channel info in STATUS output
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
241dd76cfd hostapd: Check EDMG configuration against capability
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:20:41 +03:00
Alexei Avshalom Lazar
dc3457cc4a hostapd: Check usability of EDMG channel
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 17:02:12 +03:00
Alexei Avshalom Lazar
bebd91e9c4 Add EDMG parameters to set_freq functions
This updates the frequency parameter setting functions to include
argument for EDMG.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:23 +03:00
Alexei Avshalom Lazar
fdd0fef2c6 EDMG: Helper functions for parameter encoding/checking
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:59:21 +03:00
Alexei Avshalom Lazar
e8ff22f471 wpa_supplicant: Add EDMG channel configuration parameters
Add two new configuration parameters for wpa_supplicant:
enable_edmg: Enable EDMG capability for STA/AP mode
edmg_channel: Configure channel bonding. In AP mode it defines the EDMG
channel to start the AP on. In STA mode it defines the EDMG channel to
use for connection.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:50:06 +03:00
Alexei Avshalom Lazar
5c5ff22efc hostapd: Add EDMG channel configuration parameters
Add two new configuration parameters for hostapd:
enable_edmg: Enable EDMG capability for AP mode in the 60 GHz band
edmg_channel: Configure channel bonding for AP mode in the 60 GHz band

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:46:29 +03:00
Alexei Avshalom Lazar
dda5d9e315 nl80211: Add support for EDMG channels
IEEE P802.11ay defines Enhanced Directional Multi-Gigabit (EDMG) STA and
AP which allow channel bonding of 2 channels and more.

nl80211 provides the driver's EDMG capabilities from the kernel
using two new attributes:
NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16
GHz channel(s) that are supported by the driver.
NL80211_BAND_ATTR_EDMG_BW_CONFIG - represents the channel bandwidth
configurations supported by the driver.
The driver's EDMG capabilities are stored inside struct hostapd_hw_modes.

As part of the connect request and starting AP, EDMG parameters are
passed as part of struct hostapd_freq_params.

The EDMG parameters are sent to the kernel by using two new attributes:
NL80211_ATTR_WIPHY_EDMG_CHANNEL and NL80211_ATTR_WIPHY_EDMG_BW_CONFIG
which specify channel and bandwidth configuration for the driver to use.

This implementation is limited to CB2 (channel bonding of 2 channels)
and the bonded channels must be adjacent.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:06:04 +03:00
Alexei Avshalom Lazar
a19913c170 IEEE P802.11ay/D4.0 defines for EDMG
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
2019-10-07 16:06:01 +03:00
Jouni Malinen
656b07c189 tests: sigma_dut DPP/QR responder status query
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-04 17:03:47 +03:00
Jouni Malinen
1743ddce76 tests: sigma_dut DPP AP as Relay to Controller
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-04 16:33:36 +03:00
Jouni Malinen
b472fe2973 tests: Update server and user certificates (2019)
The previous versions expired, so need to re-sign these to fix number of
the EAP test cases. This contains updates from running
tests/hwsim/auth_server/update.sh.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-04 16:03:04 +03:00
Ankita Bajaj
c349174035 MBO/OCE: Update disable_mbo_oce flag after association
After roaming to an AP, update disable_mbo_oce flag based on the current
BSS capabilities. This flag is used to check whether STA should support
MBO/OCE features and process BTM request received from the current
connected AP.

When a STA roams from a WPA2 MBO/OCE AP with PMF enabled to a
misbehaving WPA2 MBO/OCE AP without PMF, or if the driver chooses a BSS
in which PMF is not enabled for the initial connection, BTM requests
from such APs should not be processed by STA.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 16:45:15 +03:00
Jouni Malinen
cefcbcdba4 tests: sigma_dut with DPPConfIndex 9 and 10
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
b719a1568a DPP2: Parse AKM suite selector version of akm node
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
68fea96038 DPP2: Allow Configurator to use AKM suite selectors in Config Object
The new use_akm_selector=1 value to Configurator parameters can now be
used to request a list of AKM suite selectors to be used in the
Configuration Object if the Enrollee supports version 2 or newer.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
52d469de11 DPP2: Support multiple Config Objects in Enrollee
Process all received DPP Configuration Object attributes from
Configuration Result in Enrollee STA case. If wpa_supplicant is
configured to add networks automatically, this results in one network
being added for each included Configuration Object.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
7eb06a3369 DPP2: Allow multiple Config Objects to be build on Configurator
Special @CONF-OBJ-SEP@ string can now be used as a DPP configuration
string value to split the string into two different components to
configure two Config Objects for an Enrollee.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
99918e069a DPP: Cleaned up netrole indication for config object building
Include netrole as part of struct dpp_configuration to make config
object building more flexible.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
e0d22c842a FILS+FT: Fix MFPR flag in RSNE during FILS exchange for FT
Commit e820cf952f ("MFP: Add MFPR flag into station RSN IE if 802.11w
is mandatory") added indication of MFPR flag in non-FT cases and was
further extended to cover FT protocol in commit ded56f2faf ("FT: Fix
MFPR flag in RSNE during FT protocol"). Similar fix is needed for
FILS+FT as well.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-10-01 14:21:51 +03:00
Jouni Malinen
be907f7220 tests: SAE in wpa_supplicant AP mode
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 16:30:40 +03:00
Jouni Malinen
d0a4ed6a1b Allow SAE to be used in wpa_supplicant AP mode
SAE password configuration for AP mode requires additional steps
compared to PSK cases. Previous implementation allowed SAE to be
configured, but all authentication attempts would fail due to no
password being available. Now both psk and sae_password/sae_password_id
parameters are translated properly to the hostapd configuration
structures to fix this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 16:30:35 +03:00
Roy Marples
7846e8d608 NetBSD: Fix compile
On NetBSD the ethernet header is net/if_ether.h

This also pulls in net/if.h which defines if_type, which in turn
conflicts with an enum in wpa_supplicant. As such we need to
include this at the bottom rather than at the top.

Signed-off-by: Roy Marples <roy@marples.name>
2019-09-21 13:38:32 +03:00
Jouni Malinen
d0d303ae91 tests: MBO and WPA2 without PMF on misbehaving AP
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 12:56:19 +03:00
Vamsi Krishna
2e06cef80a MBO/OCE: Work around misbehaving MBO/OCE APs that use RSN without PMF
The MBO and OCE specification require the station to mandate use of PMF
when connecting to an MBO/OCE AP that uses WPA2. The earlier
implementation prevented such misbehaving APs from being selected for
connection completely. This looks like the safest approach to take, but
unfortunately, there are deployed APs that are not compliant with the
MBO/OCE requirements and this strict interpretation of the station
requirements results in interoperability issues by preventing the
association completely.

Relax the approach by allowing noncompliant MBO/OCE APs to be selected
for RSN connection without PMF to avoid the main impact of this
interoperability issue. However, disable MBO/OCE functionality when PMF
cannot be negotiated to try to be as compliant as practical with the
MBO/OCE tech spec requirements (i.e., stop being an MBO/OCE STA for the
duration of such workaround association). Also disable support for BTM
in this workaround state since MBO would expect all BTM frames to be
protected.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-21 00:58:33 +03:00
Jouni Malinen
722c7d1958 wlantest: Process VLAN tagged Data frames
This allows Data frames to be fully processed for the case where VLAN
tags are used on the wireless link.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-09-20 23:54:05 +03:00