Commit graph

8990 commits

Author SHA1 Message Date
Jouni Malinen
47af258687 tests: GET ip_addr_go
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 21:03:39 +02:00
Mikael Kanstrup
8ffaafae07 wpa_cli: Add missing parameters for "set" command completion routine
Some config parameters were missing in the "set" command completion
routine. Add missing parameters and while at it put the parameters
under compiler switches so only valid ones are shown.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 21:00:57 +02:00
Mikael Kanstrup
0fd9d95fde wpa_cli: Add completion routine for "get" command
Add tab completion function that includes all available "get"
parameters.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 21:00:17 +02:00
Mikael Kanstrup
5c6c315fba Add IPv4 support function for "get" control interface command
Add support to retrieve IPv4 config variables with the "get" control
interface command. This allows the ip_addr_* parameters for P2P+NFC
IP address assignment to be fetched from the GO.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2015-03-15 20:57:16 +02:00
Jouni Malinen
74fa78b281 Add AVG_BEACON_RSSI to SIGNAL_POLL output
If the driver reports separate signal strength average for Beacon
frames, report that in SIGNAL_POLL output.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:45:20 +02:00
Janusz Dziedzic
4acdc48a43 nl80211: Handle NL80211_ATTR_EXT_FEATURES attribute
Handle NL80211_ATTR_EXT_FEATURES attribute and
NL80211_EXT_FEATURE_VHT_IBSS to determine whether
the driver supports VHT with IBSS.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2015-03-15 20:36:49 +02:00
Jouni Malinen
a0563ac626 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-03-04.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:35:21 +02:00
Jouni Malinen
0f89328575 P2P: Move upper layer SD interaction into a separate file
wpa_supplicant/p2p_supplicant.c has reached almost 10000 lines in length
and was getting a bit inconvenient to edit, so start splitting it into
separate files.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:25:48 +02:00
Jouni Malinen
8b949804b3 FT: Avoid unnecessary allocation for MIC calculation
Use the vector version of omac1_aes_128() to avoid unnecessary memory
allocation for each FTIE MIC calculation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 20:18:14 +02:00
Jouni Malinen
18da814be7 The master branch is now used for v2.5 development
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:38:15 +02:00
Jouni Malinen
bc04db9b06 Change version information for the 2.4 release
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 19:30:39 +02:00
Jouni Malinen
211bb7c5ea tests: WPA2-PSK-FT AP over DS and unexpected response
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-15 16:36:37 +02:00
Jouni Malinen
bc1d23ae1d Add ChangeLog entries for v2.4
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 16:51:02 +02:00
Jouni Malinen
319d9daab9 Fix bitfield_get_first_zero() to not read beyond buffer
It was possible for bitfield_get_first_zero() to read one octet beyond
the allocated bit buffer in case the first zero bit was not within
size-1 first octets.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 13:50:12 +02:00
Jouni Malinen
de52a2e259 tests: Fix parallel-vm.py test case name parsing
The 'params' argument was not used at all. Use it as an alternative
means for setting the list of test cases to execute.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 12:12:01 +02:00
Jouni Malinen
4f76eb81e9 tests: Add --valgrind argument to parallel-vm.py
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 12:09:23 +02:00
Jouni Malinen
eb9c155498 tests: P2P autonomous GO and many clients (P2P IE fragmentation)
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:58:17 +02:00
Jouni Malinen
d0cd00de6f tests: Verify wpa_supplicant AP mode events
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:14:47 +02:00
Jouni Malinen
39c3bfcde3 Indicate AP-DISABLED on main AP mode deinit path
This event was previously used only when disabling AP mode operation
through hostapd control interface. Make this more consistent by
providing same indication when disabling hostapd interface through the
interface deinit path. This adds the event to the case where a full
hostapd radio instance is removed which also applies for the
wpa_supplicant AP mode operations.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:14:22 +02:00
Jouni Malinen
f10487e1af Send CTRL-EVENT-DISCONNECTED on wpa_supplicant AP deinit
This makes the AP mode more consistent with other modes by providing a
matching pair of CTRL-EVENT-CONNECTED and CTRL-EVENT-DISCONNECTED event
messages.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-14 10:05:05 +02:00
Jouni Malinen
f584b5a196 tests: Document dependency on python-crypto
Crypto.Cipher module is now needed to be able to run the 4-way handshake
protocol tests.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 23:47:02 +02:00
Rohit Agrawal
00033a0903 OpenSSL: Always accept pinned certificates
If OpenSSL reports that a presented leaf certificate is invalid,
but it has been explicitly pinned, accept it anyway.

Signed-off-by: Rohit Agrawal <rohit.agrawal.mn@gmail.com>
2015-03-07 21:26:26 +02:00
Sunil Dutt
b2329e4ad5 Add QCA vendor subcmd for Data Offload
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-07 19:19:30 +02:00
Jouni Malinen
e0c46c8e44 tests: Protocol testing for EAPOL-Key supplicant processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 17:18:33 +02:00
Jouni Malinen
0860b2199f tests: Make ap_acs_40mhz more robust
Explicitly clear cached scan results on the AP interface before starting
ACS. This avoids issues where conflicting BSS entries from previously
executed test cases could affect channel selection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 17:02:40 +02:00
Jouni Malinen
1d246a1db9 Make rate-not-supported debug print more useful
It looks like "hardware does not support required rate 1.0 Mbps" has
started showing up in some hwsim test cases as a reason for failure.
This should not really occur with mac80211_hwsim, so add more details to
the debug print to make it easier to figure out what exactly happened.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 15:35:40 +02:00
Jouni Malinen
761396e4be Reject Group Key message 1/2 prior to completion of 4-way handshake
Previously, it would have been possible to complete RSN connection by
skipping the msg 3/4 and 4/4 completely. This would have resulted in
pairwise key not being configured. This is obviously not supposed to
happen in practice and could result in unexpected behavior, so reject
group key message before the initial 4-way handshake has been completed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 13:00:06 +02:00
Jouni Malinen
68baa82cd2 tests: Add --short option for parallel-vm.py
This can be used to filter out test cases that take significantly longer
time to execute (15 seconds or longer). While this reduces testing
coverage, this can be useful to get a pretty quick coverage in
significantly faster time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 12:23:39 +02:00
Johannes Berg
d2002f8334 tests: Allow running with arbitrary working directory
It's somewhat annoying that you can only run parallel-vm.py as
./parallel-vm.py, not from elsewhere by giving the full path,
so fix that by resolving the paths correctly in the scripts where
needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-07 12:23:07 +02:00
Johannes Berg
4f06261bd9 tests: parallel-vm.py: Use argparse module
Instead of hand-writing a (positional) parser, use the argparse module.
This also gets us nice help output.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-07 12:23:04 +02:00
Jouni Malinen
4e979d9de6 tests: Make ap_remove_during_acs* more robust
These test cases need to use the previous-AP-on-correct-band workaround
similarly to test_ap_acs.py test cases for now to work with
mac80211_hwsim limitations on channel survey.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-07 00:00:08 +02:00
Jouni Malinen
d970337da7 tests: Make suite_b* test cases more robust
Explicitly clear the cfg80211 BSS cache at the beginning of these test
cases to avoid matching BSS flags against incorrect AP.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-06 23:18:46 +02:00
Jouni Malinen
45de328602 tests: More thorough cache clearing in ap_hs20_hidden_ssid_in_scan_res
It looked like cfg80211 BSS entry for the zero-length SSID could remain
after this test case. Stop the AP and scan twice with flush-cache option
to make this less likely to occur and cause issues to following test
cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-06 23:17:12 +02:00
Sunil Dutt
3f0e6ec4f3 nl80211: Extend NL80211_CMD_TDLS_OPER to support discovery
ML80211_ATTR_TDLS_OPERATION can now set to NL80211_TDLS_DISCOVERY_REQ to
allow the driver to request wpa_supplicant to initiate TDLS Discovery
Request.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 21:13:21 +02:00
Sunil Dutt
c10ca2a66f TDLS: Allow driver to request TDLS Discovery Request initiation
This extends the TDLS operation request mechanism to allow TDLS
Discovery Request to be initiated by the driver similarly to the
existing Setup and Teardown requests.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 21:08:54 +02:00
Jouni Malinen
41312fc7ef mesh: Leave mesh in driver setup if initialization fails
It was possible to leave the driver in mesh point state if upper layer
mesh initialization failed in wpa_supplicant_mesh_init(). With nl80211,
this results in the vif being left in mesh point mode instead of
restoring it to station mode. That seems to break normal functionality,
e.g., for Public Action frame TX/RX. Fix this by restoring station mode
on mesh failure path.

This error could be triggered, e.g., with the following hwsim test case
sequence: wpas_mesh_secure_sae_missing_password
nfc_p2p_static_handover_tagdev_go_forced_freq

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 20:58:56 +02:00
Jouni Malinen
ac8e074ec1 Clear RSN timers for preauth and PTK rekeying on disassociation
Previously, it was possible for the wpa_sm_start_preauth() and
wpa_sm_rekey_ptk() eloop callbacks to remain active after disconnection
and potentially continue to be used for the next association. This is
not correct behavior, so explicitly cancel these timeouts to avoid
unexpected attempts to complete RSN preauthentication or to request PTK
to be rekeyed.

It was possible to trigger this issue, e.g., by running the following
hwsim test case sequence: ap_wpa2_ptk_rekey ap_ft_sae_over_ds

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 18:43:03 +02:00
Jouni Malinen
9cc223c2f5 tests: Make offchannel_tx_roc_gas more robust
It was possible for this test case to fail if cfg80211 BSS cache
included an entry for the same BSSID on another channel from an earlier
test case. Fix this by epxlicitly flushing the cache. In addition, use
scan_for_bss() to make the test less likely to fail in case of heavy CPU
load.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 17:03:06 +02:00
Jouni Malinen
f2f65dd685 Reserve QCA vendor specific nl80211 commands 61..90
These are reserved for QCA use.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 15:46:49 +02:00
Jouni Malinen
46dea617ae tests: WPS PIN and iterate through APs without selected registrar
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 15:37:02 +02:00
Rajiv Ranjan
088a210d60 HS 2.0: Add NULL check before dereferencing in hs20-osu-client
xml_node_get_text() may return NULL, so need to check the return value
before using it.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 13:37:16 +02:00
Jouni Malinen
bea8d9a39a nl80211: Use the new bridge port option proxyarp_wifi
The initial IEEE 802.11 ProxyARP functionality in the kernel needed
changes in behavior and that ended up requiring an independent
configuration parameter to be used. Update hostapd to use that new
proxyarp_wifi parameter instead of the earlier proxyarp.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-06 11:32:16 +02:00
Jouni Malinen
50c3825c6d tests: DFS with wpa_supplicant AP mode
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:25:16 +02:00
Jouni Malinen
6e9023ea49 DFS: Allow wpa_supplicant AP mode to use non-offloaded DFS
This extends the hostapd-like setup of DFS-in-userspace for
wpa_supplicant AP mode operations.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:25:13 +02:00
Ahmad Kholaif
02e42ab75b nl80211: Add vendor event parsing for DFS offload events
This converts the QCA vendor event to EVENT_DFS_* events for the case
of DFS offloaded to the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:24:32 +02:00
Ahmad Kholaif
bd0f68c473 DFS: wpa_supplicant event processing
Add radar event processing logic for AP/P2P GO. The DFS processing
functions from hostapd are now used for these wpa_supplicant cases as
well for both offloaded and non-offloaded DFS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:24:16 +02:00
Ahmad Kholaif
d7f1aa8fd7 DFS offload: P2P changes for autonomous GO
Add P2P changes to allow bringing up P2P autonomous GO on a DFS channel
if DFS functionality is offloaded to the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:24:13 +02:00
Ahmad Kholaif
1e2aaffbc8 DFS offload: Indicate AP-CSA-FINISHED for DFS offloaded case
Modify the string for AP-CSA-FINISHED event indication to include a flag
which tells the framework whether the new channel is a DFS channel.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:22:03 +02:00
Ahmad Kholaif
c13578c339 DFS offload: Add main DFS handler for offloaded case
Add handling logic for DFS offloaded case, and add a helper function
that takes the frequency (MHz) as a param and returns 1 if given channel
requires DFS, or 0 otherwise.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 17:21:30 +02:00
Ahmad Kholaif
5de81d7a7a DFS offload: Skip user space processing for CAC operations
If DFS is offloaded to the driver, hostapd should not be performing
these operations. Send the relevant control interface events to provide
information to upper layer software that may use such events to track
DFS/CAC state. This makes the offloaded DFS implementation more
consistent with the DFS-in-hostapd behavior.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2015-03-05 16:24:39 +02:00