Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2015-03-04. Signed-off-by: Jouni Malinen <j@w1.fi>
This commit is contained in:
Jouni Malinen
parent
0f89328575
commit
a0563ac626
|
|
@ -25,10 +25,30 @@
|
|||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* This header file defines the userspace API to the wireless stack. Please
|
||||
* be careful not to break things - i.e. don't move anything around or so
|
||||
* unless you can demonstrate that it breaks neither API nor ABI.
|
||||
*
|
||||
* Additions to the API should be accompanied by actual implementations in
|
||||
* an upstream driver, so that example implementations exist in case there
|
||||
* are ever concerns about the precise semantics of the API or changes are
|
||||
* needed, and to ensure that code for dead (no longer implemented) API
|
||||
* can actually be identified and removed.
|
||||
* Nonetheless, semantics should also be documented carefully in this file.
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
#define NL80211_GENL_NAME "nl80211"
|
||||
|
||||
#define NL80211_MULTICAST_GROUP_CONFIG "config"
|
||||
#define NL80211_MULTICAST_GROUP_SCAN "scan"
|
||||
#define NL80211_MULTICAST_GROUP_REG "regulatory"
|
||||
#define NL80211_MULTICAST_GROUP_MLME "mlme"
|
||||
#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
|
||||
#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
|
||||
|
||||
/**
|
||||
* DOC: Station handling
|
||||
*
|
||||
|
|
@ -173,8 +193,8 @@
|
|||
* %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
|
||||
*
|
||||
* @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
|
||||
* either a dump request on a %NL80211_ATTR_WIPHY or a specific get
|
||||
* on an %NL80211_ATTR_IFINDEX is supported.
|
||||
* either a dump request for all interfaces or a specific get with a
|
||||
* single %NL80211_ATTR_IFINDEX is supported.
|
||||
* @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
|
||||
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
|
||||
* @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
|
||||
|
|
@ -252,7 +272,18 @@
|
|||
* %NL80211_ATTR_IFINDEX.
|
||||
*
|
||||
* @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
|
||||
* regulatory domain.
|
||||
* regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
|
||||
* has a private regulatory domain, it will be returned. Otherwise, the
|
||||
* global regdomain will be returned.
|
||||
* A device will have a private regulatory domain if it uses the
|
||||
* regulatory_hint() API. Even when a private regdomain is used the channel
|
||||
* information will still be mended according to further hints from
|
||||
* the regulatory core to help with compliance. A dump version of this API
|
||||
* is now available which will returns the global regdomain as well as
|
||||
* all private regdomains of present wiphys (for those that have it).
|
||||
* If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
|
||||
* its private regdomain is the only valid one for it. The regulatory
|
||||
* core is not used to help with compliance in this case.
|
||||
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
|
||||
* after being queried by the kernel. CRDA replies by sending a regulatory
|
||||
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
|
||||
|
|
@ -306,7 +337,9 @@
|
|||
* if passed, define which channels should be scanned; if not
|
||||
* passed, all channels allowed for the current regulatory domain
|
||||
* are used. Extra IEs can also be passed from the userspace by
|
||||
* using the %NL80211_ATTR_IE attribute.
|
||||
* using the %NL80211_ATTR_IE attribute. The first cycle of the
|
||||
* scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
|
||||
* is supplied.
|
||||
* @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
|
||||
* scheduled scan is not running. The caller may assume that as soon
|
||||
* as the call returns, it is safe to start a new scheduled scan again.
|
||||
|
|
@ -774,6 +807,10 @@
|
|||
* peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
|
||||
* when this command completes.
|
||||
*
|
||||
* @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
|
||||
* as an event to indicate changes for devices with wiphy-specific regdom
|
||||
* management.
|
||||
*
|
||||
* @NL80211_CMD_MAX: highest used command number
|
||||
* @__NL80211_CMD_AFTER_LAST: internal use
|
||||
*/
|
||||
|
|
@ -958,6 +995,8 @@ enum nl80211_commands {
|
|||
NL80211_CMD_TDLS_CHANNEL_SWITCH,
|
||||
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
|
||||
|
||||
NL80211_CMD_WIPHY_REG_CHANGE,
|
||||
|
||||
/* add new commands above here */
|
||||
|
||||
/* used to define NL80211_CMD_MAX below */
|
||||
|
|
@ -1655,6 +1694,13 @@ enum nl80211_commands {
|
|||
* @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
|
||||
* creation then the new interface will be owned by the netlink socket
|
||||
* that created it and will be destroyed when the socket is closed.
|
||||
* If set during scheduled scan start then the new scan req will be
|
||||
* owned by the netlink socket that created it and the scheduled scan will
|
||||
* be stopped when the socket is closed.
|
||||
* If set during configuration of regulatory indoor operation then the
|
||||
* regulatory indoor configuration would be owned by the netlink socket
|
||||
* that configured the indoor setting, and the indoor operation would be
|
||||
* cleared when the socket is closed.
|
||||
*
|
||||
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
|
||||
* the TDLS link initiator.
|
||||
|
|
@ -1688,6 +1734,32 @@ enum nl80211_commands {
|
|||
*
|
||||
* @NL80211_ATTR_MAC_MASK: MAC address mask
|
||||
*
|
||||
* @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
|
||||
* is self-managing its regulatory information and any regulatory domain
|
||||
* obtained from it is coming from the device's wiphy and not the global
|
||||
* cfg80211 regdomain.
|
||||
*
|
||||
* @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
|
||||
* array. The feature flags are identified by their bit index (see &enum
|
||||
* nl80211_ext_feature_index). The bit index is ordered starting at the
|
||||
* least-significant bit of the first byte in the array, ie. bit index 0
|
||||
* is located at bit 0 of byte 0. bit index 25 would be located at bit 1
|
||||
* of byte 3 (u8 array).
|
||||
*
|
||||
* @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
|
||||
* returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
|
||||
* may return a survey entry without a channel indicating global radio
|
||||
* statistics (only some values are valid and make sense.)
|
||||
* For devices that don't return such an entry even then, the information
|
||||
* should be contained in the result as the sum of the respective counters
|
||||
* over all channels.
|
||||
*
|
||||
* @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
|
||||
* WoWLAN net-detect scan) is started, u32 in seconds.
|
||||
|
||||
* @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
|
||||
* is operating in an indoor environment.
|
||||
*
|
||||
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
||||
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
||||
* @__NL80211_ATTR_AFTER_LAST: internal use
|
||||
|
|
@ -2045,6 +2117,18 @@ enum nl80211_attrs {
|
|||
|
||||
NL80211_ATTR_MAC_MASK,
|
||||
|
||||
NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
|
||||
|
||||
NL80211_ATTR_EXT_FEATURES,
|
||||
|
||||
NL80211_ATTR_SURVEY_RADIO_STATS,
|
||||
|
||||
NL80211_ATTR_NETNS_FD,
|
||||
|
||||
NL80211_ATTR_SCHED_SCAN_DELAY,
|
||||
|
||||
NL80211_ATTR_REG_INDOOR,
|
||||
|
||||
/* add attributes here, update the policy in nl80211.c */
|
||||
|
||||
__NL80211_ATTR_AFTER_LAST,
|
||||
|
|
@ -2085,7 +2169,7 @@ enum nl80211_attrs {
|
|||
|
||||
#define NL80211_MAX_SUPP_RATES 32
|
||||
#define NL80211_MAX_SUPP_HT_RATES 77
|
||||
#define NL80211_MAX_SUPP_REG_RULES 32
|
||||
#define NL80211_MAX_SUPP_REG_RULES 64
|
||||
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
|
||||
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
|
||||
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
|
||||
|
|
@ -2225,8 +2309,15 @@ struct nl80211_sta_flag_update {
|
|||
* @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
|
||||
* @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
|
||||
* @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
|
||||
* @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
|
||||
* @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
|
||||
* same as 160 for purposes of the bitrates
|
||||
* @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
|
||||
* @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
|
||||
* a legacy rate and will be reported as the actual bitrate, i.e.
|
||||
* half the base (20 MHz) rate
|
||||
* @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
|
||||
* a legacy rate and will be reported as the actual bitrate, i.e.
|
||||
* a quarter of the base (20 MHz) rate
|
||||
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
|
||||
*/
|
||||
enum nl80211_rate_info {
|
||||
|
|
@ -2241,6 +2332,8 @@ enum nl80211_rate_info {
|
|||
NL80211_RATE_INFO_80_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_80P80_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_160_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_10_MHZ_WIDTH,
|
||||
NL80211_RATE_INFO_5_MHZ_WIDTH,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_RATE_INFO_AFTER_LAST,
|
||||
|
|
@ -2285,18 +2378,24 @@ enum nl80211_sta_bss_param {
|
|||
*
|
||||
* @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
|
||||
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
|
||||
* @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
|
||||
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
|
||||
* @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
|
||||
* @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
|
||||
* @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
|
||||
* (u32, from this station)
|
||||
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
|
||||
* (u32, to this station)
|
||||
* @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
|
||||
* (u64, from this station)
|
||||
* @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
|
||||
* (u64, to this station)
|
||||
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
|
||||
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
|
||||
* containing info as possible, see &enum nl80211_rate_info
|
||||
* @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
|
||||
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
|
||||
* station)
|
||||
* @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
|
||||
* @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
|
||||
* @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
|
||||
* (u32, from this station)
|
||||
* @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
|
||||
* (u32, to this station)
|
||||
* @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
|
||||
* @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
|
||||
* (u32, to this station)
|
||||
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
|
||||
* @NL80211_STA_INFO_LLID: the station's mesh LLID
|
||||
* @NL80211_STA_INFO_PLID: the station's mesh PLID
|
||||
|
|
@ -2320,6 +2419,16 @@ enum nl80211_sta_bss_param {
|
|||
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
|
||||
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
|
||||
* 802.11 header (u32, kbps)
|
||||
* @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
|
||||
* (u64)
|
||||
* @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
|
||||
* @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
|
||||
* for beacons only (u8, dBm)
|
||||
* @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
|
||||
* This is a nested attribute where each the inner attribute number is the
|
||||
* TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
|
||||
* each one of those is again nested with &enum nl80211_tid_stats
|
||||
* attributes carrying the actual values.
|
||||
* @__NL80211_STA_INFO_AFTER_LAST: internal
|
||||
* @NL80211_STA_INFO_MAX: highest possible station info attribute
|
||||
*/
|
||||
|
|
@ -2352,12 +2461,41 @@ enum nl80211_sta_info {
|
|||
NL80211_STA_INFO_CHAIN_SIGNAL,
|
||||
NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
|
||||
NL80211_STA_INFO_EXPECTED_THROUGHPUT,
|
||||
NL80211_STA_INFO_RX_DROP_MISC,
|
||||
NL80211_STA_INFO_BEACON_RX,
|
||||
NL80211_STA_INFO_BEACON_SIGNAL_AVG,
|
||||
NL80211_STA_INFO_TID_STATS,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_STA_INFO_AFTER_LAST,
|
||||
NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
|
||||
};
|
||||
|
||||
/**
|
||||
* enum nl80211_tid_stats - per TID statistics attributes
|
||||
* @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
|
||||
* @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
|
||||
* @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
|
||||
* attempted to transmit; u64)
|
||||
* @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
|
||||
* transmitted MSDUs (not counting the first attempt; u64)
|
||||
* @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
|
||||
* MSDUs (u64)
|
||||
* @NUM_NL80211_TID_STATS: number of attributes here
|
||||
* @NL80211_TID_STATS_MAX: highest numbered attribute here
|
||||
*/
|
||||
enum nl80211_tid_stats {
|
||||
__NL80211_TID_STATS_INVALID,
|
||||
NL80211_TID_STATS_RX_MSDU,
|
||||
NL80211_TID_STATS_TX_MSDU,
|
||||
NL80211_TID_STATS_TX_MSDU_RETRIES,
|
||||
NL80211_TID_STATS_TX_MSDU_FAILED,
|
||||
|
||||
/* keep last */
|
||||
NUM_NL80211_TID_STATS,
|
||||
NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
|
||||
};
|
||||
|
||||
/**
|
||||
* enum nl80211_mpath_flags - nl80211 mesh path flags
|
||||
*
|
||||
|
|
@ -2772,16 +2910,18 @@ enum nl80211_user_reg_hint_type {
|
|||
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
|
||||
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
|
||||
* @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
|
||||
* @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
|
||||
* spent on this channel
|
||||
* @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
|
||||
* @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
|
||||
* was turned on (on channel or globally)
|
||||
* @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
|
||||
* channel was sensed busy (either due to activity or energy detect)
|
||||
* @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
|
||||
* @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
|
||||
* channel was sensed busy
|
||||
* @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
|
||||
* receiving data
|
||||
* @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
|
||||
* transmitting data
|
||||
* @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
|
||||
* receiving data (on channel or globally)
|
||||
* @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
|
||||
* transmitting data (on channel or globally)
|
||||
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
|
||||
* (on this channel or globally)
|
||||
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
|
||||
* currently defined
|
||||
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
|
||||
|
|
@ -2791,17 +2931,25 @@ enum nl80211_survey_info {
|
|||
NL80211_SURVEY_INFO_FREQUENCY,
|
||||
NL80211_SURVEY_INFO_NOISE,
|
||||
NL80211_SURVEY_INFO_IN_USE,
|
||||
NL80211_SURVEY_INFO_CHANNEL_TIME,
|
||||
NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
|
||||
NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
|
||||
NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
|
||||
NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
|
||||
NL80211_SURVEY_INFO_TIME,
|
||||
NL80211_SURVEY_INFO_TIME_BUSY,
|
||||
NL80211_SURVEY_INFO_TIME_EXT_BUSY,
|
||||
NL80211_SURVEY_INFO_TIME_RX,
|
||||
NL80211_SURVEY_INFO_TIME_TX,
|
||||
NL80211_SURVEY_INFO_TIME_SCAN,
|
||||
|
||||
/* keep last */
|
||||
__NL80211_SURVEY_INFO_AFTER_LAST,
|
||||
NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
|
||||
};
|
||||
|
||||
/* keep old names for compatibility */
|
||||
#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
|
||||
#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
|
||||
#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
|
||||
#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
|
||||
#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
|
||||
|
||||
/**
|
||||
* enum nl80211_mntr_flags - monitor configuration flags
|
||||
*
|
||||
|
|
@ -2966,7 +3114,8 @@ enum nl80211_mesh_power_mode {
|
|||
*
|
||||
* @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
|
||||
* established peering with for longer than this time (in seconds), then
|
||||
* remove it from the STA's list of peers. Default is 30 minutes.
|
||||
* remove it from the STA's list of peers. You may set this to 0 to disable
|
||||
* the removal of the STA. Default is 30 minutes.
|
||||
*
|
||||
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
|
||||
*/
|
||||
|
|
@ -3238,6 +3387,9 @@ enum nl80211_bss {
|
|||
/**
|
||||
* enum nl80211_bss_status - BSS "status"
|
||||
* @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
|
||||
* Note that this is no longer used since cfg80211 no longer
|
||||
* keeps track of whether or not authentication was done with
|
||||
* a given BSS.
|
||||
* @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
|
||||
* @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
|
||||
*
|
||||
|
|
@ -3565,6 +3717,8 @@ struct nl80211_pattern_support {
|
|||
* @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
|
||||
* the chip into a special state -- works best with chips that have
|
||||
* support for low-power operation already (flag)
|
||||
* Note that this mode is incompatible with all of the others, if
|
||||
* any others are even supported by the device.
|
||||
* @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
|
||||
* is detected is implementation-specific (flag)
|
||||
* @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
|
||||
|
|
@ -3621,9 +3775,12 @@ struct nl80211_pattern_support {
|
|||
* @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
|
||||
* is detected. This is a nested attribute that contains the
|
||||
* same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
|
||||
* specifies how the scan is performed (e.g. the interval and the
|
||||
* channels to scan) as well as the scan results that will
|
||||
* trigger a wake (i.e. the matchsets).
|
||||
* specifies how the scan is performed (e.g. the interval, the
|
||||
* channels to scan and the initial delay) as well as the scan
|
||||
* results that will trigger a wake (i.e. the matchsets). This
|
||||
* attribute is also sent in a response to
|
||||
* @NL80211_CMD_GET_WIPHY, indicating the number of match sets
|
||||
* supported by the driver (u32).
|
||||
* @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
|
||||
* containing an array with information about what triggered the
|
||||
* wake up. If no elements are present in the array, it means
|
||||
|
|
@ -4193,6 +4350,21 @@ enum nl80211_feature_flags {
|
|||
NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
|
||||
};
|
||||
|
||||
/**
|
||||
* enum nl80211_ext_feature_index - bit index of extended features.
|
||||
* @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
|
||||
*
|
||||
* @NUM_NL80211_EXT_FEATURES: number of extended features.
|
||||
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
|
||||
*/
|
||||
enum nl80211_ext_feature_index {
|
||||
NL80211_EXT_FEATURE_VHT_IBSS,
|
||||
|
||||
/* add new features before the definition below */
|
||||
NUM_NL80211_EXT_FEATURES,
|
||||
MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
|
||||
};
|
||||
|
||||
/**
|
||||
* enum nl80211_probe_resp_offload_support_attr - optional supported
|
||||
* protocols for probe-response offloading by the driver/FW.
|
||||
|
|
|
|||
Loading…
Reference in a new issue