Commit graph

4434 commits

Author SHA1 Message Date
Jouni Malinen
f585c6a6d6 EAP-SIM server: Move subtype validation from check into process
This is needed to be able to use SIM-Notification round to indicate
failure per RFC 4186, chapter 6.3.3.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 01:42:05 +03:00
Jouni Malinen
c95c8b1859 EAP-SIM server: Use Notification before EAP-Failure
RFC 4186, chapter 6.3.3 mandates that EAP-Failure is used only after
Client-Error and Notification messages. Convert the direct jumps to the
FAILURE state with a notification round before sending out EAP-Failure.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 01:20:29 +03:00
Jouni Malinen
9343498989 EAP-SIM/AKA peer: Note sending of Client-Error in debug log
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 00:58:03 +03:00
Jouni Malinen
5d65ca514d EAP-SIM peer: Fix AT_COUNTER_TOO_SMALL use
The AT_NONCE_S value needs to be used in AT_MAC calculation for
SIM/Re-authentication response even if re-authentication is rejected
with AT_COUNTER_TOO_SMALL.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-09-02 00:39:48 +03:00
Jouni Malinen
31a3de8af3 EAP-SIM server: Add support for AT_COUNTER_TOO_SMALL
If the peer rejects re-authentication with AT_COUNTER_TOO_SMALL, fall
back to full authentication to allow the authentication session to be
completed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-02 00:38:39 +03:00
Jouni Malinen
f24630d26a EAP-SIM DB: Use pointer to struct eap_sim_db_data instead of void*
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:48:48 +03:00
Jouni Malinen
2c22668c8f EAP-SIM DB: Add debug print for AKA reauth identity addition
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:41:23 +03:00
Jouni Malinen
60123b6430 EAP-AKA server: Remove unnecessary protocol version check
This validation is done automatically as part of the prefix value
use in the username.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:38:25 +03:00
Jouni Malinen
3e43a8ec4f EAP-SIM DB: Get rid of unnecessary wrapper functions
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:37:17 +03:00
Jouni Malinen
e95ffe0465 EAP-SIM DB: Return pseudonym username instead of structure with it
This cleans up the implemenation a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:32:22 +03:00
Jouni Malinen
741596a817 EAP-SIM DB: Remove unneeded SQLite value copying
These fields are used only as the search key, so the value is already
known and does not need to be copied from the database.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:26:26 +03:00
Jouni Malinen
6d49d9ecb8 EAP-SIM DB: Store permanent username as string in SQLite DB
Store permanent username (i.e., including prefix character) instead of
IMSI in the SQLite DB. Convert the string to a string since the EAP-AKA
prefix can start with zero. This cleans up the field names since the
value was already with the prefix included instead of just IMSI. In
addition, this explicitly removes some theoretical cases where the
different identity types could have been mixed.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:22:15 +03:00
Jouni Malinen
3961dffc13 EAP-SIM DB: Rename valid_pseudonym_string to valid_db_string
This will be used with other strings, too, so use a more generic
function name.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:17:48 +03:00
Jouni Malinen
61e181db86 EAP-SIM DB: Use char* strings instead of u8* pointer and length
Since the EAP-SIM/AKA identities are ASCII strings, there is no need to
use more complex way for storing and passing them. In addition, be more
strict about enforcing username (i.e., no realm part) to be used in the
EAP-SIM DB API. Similarly, require specific username type instead of any
of the types to be used as the key in the pseudonym and reauth
operations. This allows simpler lookup operations to be used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 21:10:19 +03:00
Jouni Malinen
4e9015a225 EAP-SIM DB: Remove unused eap_sim_db_identity_known()
This function is not used anymore, so remove it.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 20:12:40 +03:00
Jouni Malinen
8a9f58f2cc EAP-AKA server: Store permanent username in session data
This allows identity use to be cleaned up in various operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 20:09:07 +03:00
Jouni Malinen
ccea4fb107 EAP-AKA server: Split fullauth setup into a separate function
This is an initial cleanup step for AKA/Identity processing.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 19:37:49 +03:00
Jouni Malinen
02a0ce13bc EAP-AKA server: Require AKA/Identity response to include identity
Since we always request an identity in the request, the response
has to include AT_IDENTITY. This allows the AKA/Identity response
processing to be simplified a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 19:23:14 +03:00
Jouni Malinen
b4569a3bd8 EAP-AKA server: Use simpler AKA/Identity request determination
There is no need to use eap_sim_db_identity_known() here since a new
AKA/Identity message is built only if the identity in the previous
response was not recognized. The first round is always used to request
AT_ANY_ID_REQ to meet the RFC 4187 recommendation on EAP method specific
identity request.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 19:19:45 +03:00
Jouni Malinen
9bf403b920 EAP-SIM server: Store permanent username in session data
This allows identity use to be cleaned up in various operations.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 19:15:01 +03:00
Jouni Malinen
15cfe2b40f EAP-SIM server: Require SIM/Start response to include identity
Since we always request an identity in the request, the response
has to include AT_IDENTITY. This allows the SIM/Start response
processing to be simplified a bit.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 18:56:35 +03:00
Jouni Malinen
336a46aeda EAP-SIM server: Use simpler SIM/Start identity request determination
There is no need to use eap_sim_db_identity_known() here since a new
SIM/Start message is built only if the identity in the previous response
was not recognized. The first round will always request AT_ANY_ID_REQ to
meet the RFC 4186 recommendation on EAP method specific identity request
being used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 18:51:09 +03:00
Jouni Malinen
e87982ea4c EAP-SIM DB: Remove unnecessary aka_prime parameter
The reauth_id prefix can be used to determine which AKA version is used,
so there is no need to store the aka_prime information in a separate
field.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 18:41:35 +03:00
Jouni Malinen
bcdf2096bd SME: Fix disconnec-while-authenticating
Commit 0d30cc240f forced
wpa_s->current_ssid to be cleared in wpa_supplicant_mark_disassoc()
which gets called from wpa_supplicant_event_disassoc(). This broke SME
disassoc-while-authenticating workaround for cfg80211. Fix this by
restoring wpa_s->current_ssid in case SME authentication is in progress.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-09-01 17:20:27 +03:00
Jouni Malinen
0aadd5682f Fix disconnection event processing
Commit 0d30cc240f forced
wpa_s->current_ssid and wpa_s->key_mgmt to be cleared in
wpa_supplicant_mark_disassoc() which gets called from
wpa_supplicant_event_disassoc(). This broke IEEE 802.1X authentication
failure processing and P2P deauthentication notification (group
termination).

Fix this by splitting wpa_supplicant_event_disassoc() into two parts and
make wpas_p2p_deauth_notif() indicate whether the interface was removed.
If so, the last part of disassocition event processing is skipped. Since
the wpa_supplicant_mark_disassoc() call is in the second part, the above
mentioned issues are resolved. In addition, this cleans up the P2P group
interface removal case by not trying to use fast reconnection mechanism
just before the interface gets removed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 22:04:41 +03:00
Jouni Malinen
6f1ca696c7 P2P: Do not fail p2p_group_remove just based on current_ssid
The wpa_s->current_ssid pointer may get cleared, e.g., when
disconnected. Commit 30ee769235 made
wpas_p2p_group_delete() exit early before removing a P2P interface in
this type of case. That can cause number of issues from p2p_group_remove
command failing to busy loop when terminating wpa_supplicant if there is
a P2P group interface in client mode and that interface happens to be in
disconnected state. Fix these issues by allowing wpas_p2p_group_delete()
remove the P2P group interface regardless of whether wpa_s->currnt_ssid
is set.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 21:35:32 +03:00
Jouni Malinen
4d32c0c44d P2P: Allow p2p_invite-persistent to specify channel for GO
The freq and ht40 parameters can now be used with the p2p_invite
command when reinvoking a persistent group as the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 21:20:51 +03:00
Jouni Malinen
55d834e172 Android: Add Wi-Fi Display into the makefile
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 18:34:32 +03:00
Jouni Malinen
43323e43d3 Android: Include Hotspot 2.0 support in the default build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 18:34:30 +03:00
Jouni Malinen
50cfe0e1cb Android: Add new keystore include path for JB
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 18:34:27 +03:00
Jouni Malinen
aa20fc1a48 Android: Sync with SHA256 hostapd makefile updates
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-31 18:34:25 +03:00
Jouni Malinen
962ada5465 Include notes on EAP SIM DB in hostapd using SQLite
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 16:58:58 +03:00
Jouni Malinen
29813cfdc0 EAP-SIM DB: Optional use of SQLite database for reauth data
If hostapd is built and configured to use SQLite database, store
EAP-SIM/AKA reauth data into the database to allow this to persist
over hostapd restarts.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 16:55:36 +03:00
Jouni Malinen
66979bb833 EAP-SIM DB: Optional use of SQLite database for pseudonyms
This allows hostapd to use an SQLite database for storing EAP-SIM/AKA
pseudonyms over process restarts. CONFIG_SQLITE=y build option adds
support for this and the SQLite database file is specified in eap_sib_db
configuration parameter.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 16:04:52 +03:00
Jouni Malinen
c3550295fb Move WPA cipher information into a shared location
Try to share most of the cipher information like key and RSC lengths and
suite selector conversions, etc. in wpa_common.c to avoid having similar
code throughout the WPA implementation for handling cipher specific
behavior.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-30 11:53:54 +03:00
Jouni Malinen
7b1aa4fe30 Move variable declaration into the beginning of function
The variables used within the #ifndef block here needs to be defined in
the beginning of the function to avoid issues with some compilers.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 00:37:59 +03:00
Jouni Malinen
1f3a3ec4a4 Interworking: Fix build without CONFIG_PCSC=y
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-30 00:35:53 +03:00
Jouni Malinen
6ffdc2f7bd WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 19:51:29 +03:00
Jouni Malinen
347d6a5b76 WFD: Add support for sending Wi-Fi Display service discovery requests
wpa_cli p2p_serv_disc_req command can now be used to request WSD
request to be sent to specified or all peers who support WSD.

format: wifi-display <list of roles> <list of subelements>
examples:
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source] 2,3,4,5
p2p_serv_disc_req 02:01:02:03:04:05 wifi-display [pri-sink] 3
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [sec-source] 2
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source+sink] 2,3,4,5
p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source][pri-sink] 2,3,4,5

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 19:51:29 +03:00
Jouni Malinen
337c781f9c WFD: Add wfd_subelems hexdump in BSS ctrl_iface command output
This makes it easier to parse the WFD subelements from scan results.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 19:51:29 +03:00
Jouni Malinen
9675ce354a WFD: Add Wi-Fi Display support
This commit adds control interface commands and internal storage of
Wi-Fi Display related configuration. In addition, WFD IE is now added
to various P2P frames, Probe Request/Response, and (Re)Association
Request/Response frames. WFD subelements from peers are stored in the
P2P peer table.

Following control interface commands are now available:
SET wifi_display <0/1>
GET wifi_display
WFD_SUBELEM_SET <subelem> [hexdump of length+body]
WFD_SUBELEM_GET <subelem>

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 19:51:29 +03:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Wei-Jen Lin
e3e234fa35 nl80211: Set P2P multichan concurrency based on interface combinations
Use the NL80211_IFACE_COMB_NUM_CHANNELS value > 1 as a trigger for
enabling support for P2P multichannel channel concurrency. This does not
handle all possible details of enforcing driver capabilities, but it is
a good first step for allowing nl80211 drivers to enable multichannel
concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 19:31:58 +03:00
Jouni Malinen
01335e2c8d wpa_cli: Add tab completion for p2p_find
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 17:38:53 +03:00
Jouni Malinen
e4f6873cce wpa_cli: Fix tab completion
Commit b49039bda9 redesigned tab
completion, but added the new call to completion functions into wrong
location. This needs to be done within the loop to find the correct
completion function.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 17:25:09 +03:00
Jouni Malinen
4d5bda5fca Interworking: Add optional use of network selection on normal scans
auto_interworking=1 configuration parameter can be used to request
wpa_supplicant to use Interworking network selection automatically as a
part of the normal (non-Interworking) network selection if the scan
results do not match with enabled networks. This makes scanning work
similarly to the "interworking_select auto" command.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 16:14:13 +03:00
Jouni Malinen
b1f122964e Add generic GAS request mechanism
The new gas_request and gas_response_get commands can be used to request
arbitary GAS queries to be performed. These can be used with ANQP or
with other (including vendor specific) advertisement protocols.

gas_request <BSSID> <AdvProtoID> [Query]
gas_response_get <addr> <dialog token> [offset,length]

For example, ANQP query for Capability list in interactive wpa_cli
session:

> gas_request 02:00:00:00:01:00 00 000102000101
<3>GAS-RESPONSE-INFO addr=02:00:00:00:01:00 dialog_token=0
status_code=0 resp_len=32
> gas_response_get 02:00:00:00:01:00 00
01011c00010102010501070108010c01dddd0c00506f9a110200020304050607
> gas_response_get 02:00:00:00:01:00 00 0,10
01011c00010102010501
> gas_response_get 02:00:00:00:01:00 00 10,10
070108010c01dddd0c00
> gas_response_get 02:00:00:00:01:00 00 20,10
506f9a11020002030405
> gas_response_get 02:00:00:00:01:00 00 30,2
0607

It should be noted that the maximum length of the response buffer is
currently 4096 bytes which allows about 2000 bytes of the response data
to be fetched with a single gas_response_get command. If the response is
longer, it can be fetched in pieces as shown in the example above.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 18:13:10 +03:00
Jouni Malinen
b52f084cfa Add parameter for vendor specific elements into Beacon/Probe Response
The new vendor_elements parameter in hostapd.conf can be used to add new
vendor specific element(s) into Beacon and Probe Response frames.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 16:20:10 +03:00
Jouni Malinen
a462036a47 WPS: Allow AP that becomes active be tried immediately
Clear the possible blacklisting of a WPS AP during WPS PIN iteration if
the AP moves to selected registrar TRUE state or if it adds our MAC
address to the list of authorized MACs.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 13:51:35 +03:00
Jouni Malinen
f9f0526bcd WPS: Maintain more AP state during WPS PIN iteration
Maintain state of WPS APs during iteration to find the correct AP for
WPS PIN operation when no specific BSSID is specified. This information
can be used for optimizing the order in which the APs are tried. This
commit is only adding the collection of the information and more
detailed debug information to make debug logs more helpful in figuring
out how the AP selection order could be improved.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-27 13:48:11 +03:00