Commit graph

4654 commits

Author SHA1 Message Date
Peter Oh
0daa7b75fa mesh: Factor out mesh join function
Mesh join function consists of two parts which are preparing
configurations and sending join event to the driver. Since physical mesh
join event could happen either right after mesh configuration is done or
after CAC is done in case of DFS channel is used, factor out the
function into two parts to reduce redundant calls.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:35:56 +02:00
Peter Oh
1877842904 mesh: Factor out RSN initialization
RSN initialization can be used in different phases if mesh
initialization and mesh join don't happen in sequence such as DFS CAC is
done in between, hence factor it out to help convering the case. This
can also get rid of unnecessary indentation by handling the
mconf->security != MESH_CONF_SEC_NONE functionality in a helper
function.

Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
2019-01-03 12:04:23 +02:00
Hagai Moshe
b9eb717f85 wpa_cli: Add command for setting PSK_PASSPHRASE
Setting mem_only_psk=1 in the wpa_supplicant configuration prevents the
passphrase from being stored in the configuration file. wpa_supplicant
will request the PSK passphrase over the control interface in such case
and this new wpa_cli command can be used to set the psk_passphrase.

usage:
psk_passphrase <network id> <psk_passphrase>

Signed-off-by: Hagai Moshe <hagai.moshe@tandemg.com>
Signed-off-by: Simon Dinkin <simon.dinkin@tandemg.com>
2019-01-03 00:52:51 +02:00
Alex Khouderchah
38b405c8f0 dbus: Expose authentication status to D-Bus
wpa_supplicant currently logs CTRL-EVENT-AUTH-FAILED errors when
authentication fails, but doesn't expose any property to the D-Bus
interface related to this.

This change adds the "AuthStatusCode" property to the interface, which
contains the IEEE 802.11 status code of the last authentication.

Signed-off-by: Alex Khouderchah <akhouderchah@chromium.org>
2019-01-03 00:39:12 +02:00
Matthew Wang
80d06d0ca9 dbus: Export BSS Transition Management status
Add new Interface properties "BSSTMStatus", which carries the status of
the most recent BSS Transition Management request. This property will be
logged in UMA to measure 802.11v success.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-01-03 00:27:01 +02:00
Matthew Wang
2bbad1c7c9 dbus: Export roam time, roam complete, and session length
Add new Interface properties "RoamTime", "RoamComplete", and
"SessionLength". "RoamTime" carries the roam time of the most recent
roam in milliseconds. "RoamComplete" carries True or False corresponding
to the success status of the most recent roam. "SessionLength" carries
the number of milliseconds corresponding to how long the connection to
the last AP was before a roam or disconnect happened.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-01-03 00:20:34 +02:00
Jouni Malinen
ed87f6a80e Use a helper function for checking Extended Capabilities field
The new ieee802_11_ext_capab() and wpa_bss_ext_capab() functions can be
used to check whether a specific extended capability bit is set instead
of having to implement bit parsing separately for each need.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-02 18:13:19 +02:00
Jouni Malinen
e6b0898da3 Add [FST] and [UTF-8] flags to BSS command output
These flags were used in SCAN_RESULTS command output, but not BSS. Make
these consistent by adding the flags to BSS as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-02 17:58:31 +02:00
Jouke Witteveen
1f2c42cc7f Show [UTF-8] flag if the SSID is reported as UTF-8
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
2019-01-02 17:58:05 +02:00
Avraham Stern
ecef0687dc RRM: Support for Last Beacon Report Indication subelement
IEEE P802.11-REVmd/D2.0, 9.4.2.20.7 (Beacon request) and 9.4.2.21.7
(Beacon report) add the Last Beacon Report Indication subelement to
Beacon Request and Beacon Report elements.

Add the Last Beacon Report Indication subelement to all Beacon Report
elements if the Beacon Request indicated that this subelement is
requested.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 16:26:11 +02:00
Avraham Stern
3ec118780a RRM: Add support for beacon report fragmentation
When the frame body subelement would cause the measurement report
element to exceed the maximum element size, the frame body subelement
used to be truncated. In addition, some elements were always truncated
in order to keep the reported frame body short (e.g. RSN IE).

Alternatively, IEEE P802.11-REVmd/D2.0, 9.4.2.21.7 extension to Beacon
reporting can be used: The frame body subelement is fragmented across
multiple beacon report elements, and the reported frame body fragment ID
subelement is added.

Use beacon report fragmentation instead of truncating the frame body
as this method gives the AP a more complete information about the
reported APs.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2019-01-02 15:54:55 +02:00
Nishant Chaprana
46efa3dae0 dbus: Add vendor specific information element in peer properties
Make vendor specific information elements (VSIE) available in peer
properties, so that VSIE of a specific peer can be retrieved using
peer's object path.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2019-01-02 13:00:57 +02:00
Lubomir Rintel
89a7cdd690 crypto: Add option to use getrandom()
According to random(4) manual, /dev/random is essentially deprecated on
Linux for quite some time:

"The /dev/random interface is considered a legacy interface, and
/dev/urandom is preferred and sufficient in all use cases, with the
exception of applications which require randomness during early boot
time; for these applications, getrandom(2) must be used instead, because
it will block until the entropy pool is initialized."

An attempt to use it would cause unnecessary blocking on machines
without a good hwrng even when it shouldn't be needed. Since Linux 3.17,
a getrandom(2) call is available that will block only until the
randomness pool has been seeded.

It is probably not a good default yet as it requires a fairly recent
kernel and glibc (3.17 and 2.25 respectively).

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2019-01-02 01:24:18 +02:00
Jouni Malinen
cc58a35735 Update copyright notices for the new year 2019
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 23:38:56 +02:00
Beni Lev
19677b77c3 OCE: Add RSSI based association rejection support (STA)
An AP might refuse to connect a STA if it has a low RSSI. In such case,
the AP informs the STA with the desired RSSI delta and a retry timeout.
Any subsequent association attempt with that AP (BSS) should be avoided,
unless the RSSI level improved by the desired delta or the timeout has
expired.

Defined in Wi-Fi Alliance Optimized Connectivity Experience technical
specification v1.0, section 3.14 (RSSI-based association rejection
information).

Signed-off-by: Beni Lev <beni.lev@intel.com>
2019-01-01 17:56:25 +02:00
Aloni, Adiel
dc9b7d217c P2P: Set global->p2p_group_formation in wpas_p2p_join_start() for p2pdev
When a dedicated P2P device interface is used, the
global->p2p_group_formation was not set in wpas_p2p_join_start() if no
separate group interface is used. This would cause that in case of a
failure in group formation, the cleaning of p2p_in_provisioning is done
on the wrong interface. Furthermore, P2P_CANCEL command could not be
used to stop such a group-join operation. Fix this by setting the
global->p2p_group_formation correctly in case that the group interface
is reusing wpa_s->parent.

Signed-off-by: Adiel Aloni <adiel.aloni@intel.com>
2019-01-01 16:56:22 +02:00
Jouni Malinen
32bb47faa1 Update wpa_supplicant channel list on FLUSH
Try to make sure the driver channel list state is synchronized with
wpa_supplicant whenever explicitly clearing state (e.g., between hwsim
test cases).

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-01-01 15:58:46 +02:00
Ben Greear
3518e3623f wpa_cli: Allow reconnect to global interface
Old code would just re-connect to a particular interface, even if user
had started wpa_cli with the '-g' option. Refactor global control
interface connection routine to allow it to be used in
wpa_cli_reconnect().

Signed-off-by: Ben Greear <greearb@candelatech.com>
2018-12-31 12:32:14 +02:00
Michal Privoznik
1b8ed2cac1 wpa_supplicant: Fix build with !CONFIG_AP and CONFIG_CTRL_IFACE_DBUS_NEW
If the CONFIG_CTRL_IFACE_DBUS_NEW is enabled but CONFIG_AP is
disabled the build fails. This is because dbus getters try to
access ap_iface member of wpa_supplicant struct which is defined
if and only if CONFIG_AP is enabled.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-31 11:41:26 +02:00
Jouni Malinen
948ba8c294 mka: MIB information
Provide MKA information through the wpa_supplicant control interface MIB
command.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-29 16:52:31 +02:00
Asbjørn Sloth Tønnesen
594b7fbdde wpa_supplicant: Document nl80211 driver in the man page
Signed-off-by: Asbjørn Sloth Tønnesen <hostap@asbjorn.st>
2018-12-27 16:03:46 +02:00
Jouni Malinen
7251f0badc mka: Extend CAK/CKN-from-EAP-MSK API to pass in MSK length
This can be used to allow 256-bit key hierarchy to be derived from
EAP-based authentication. For now, the MSK length is hardcoded to 128
bits, so the previous behavior is maintained.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-26 16:44:58 +02:00
Jouni Malinen
871439b5d5 mka: Allow 256-bit CAK to be configured for PSK mode
This allows 256-bit CAK to be used as the root key in the MKA key
hierarchy.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-26 16:44:58 +02:00
Andrey Kartashev
e49b78c0d5 mka: Allow configuration of MACsec replay protection
Add new configuration parameters macsec_replay_protect and
macsec_replay_window to allow user to set up MACsec replay protection
feature. Note that according to IEEE Std 802.1X-2010 replay protection
and delay protection are different features: replay protection is
related only to SecY and does not appear on MKA level while delay
protection is something that KaY can use to manage SecY state.

Signed-off-by: Andrey Kartashev <andrey.kartashev@afconsult.com>
2018-12-26 16:42:25 +02:00
Mike Siedzik
2fc0675683 mka: Fix lowest acceptable Packet Number (LPN) calculation and use
The purpose of the Lowest Acceptable PN (lpn) parameters in the MACsec
SAK Use parameter set is to enforce delay protection. Per IEEE Std
802.1X-2010, Clause 9, "Each SecY uses MKA to communicate the lowest PN
used for transmission with the SAK within the last two seconds, allowing
receivers to bound transmission delays."

When encoding the SAK Use parameter set the KaY should set llpn and olpn
to the lowest PN transmitted by the latest SAK and oldest SAK (if
active) within the last two seconds. Because MKPDUs are transmitted
every 2 seconds (MKA_HELLO_TIME), the solution implemented here
calculates lpn based on the txsc->next_pn read during the previous MKPDU
transmit.

Upon receiving and decoding a SAK Use parameter set with delay
protection enabled, the KaY will update the SecY's lpn if the delay
protect lpn is greater than the SecY's current lpn (which is a product
of last PN received and replay protection and window size).

Signed-off-by: Michael Siedzik <msiedzik@extremenetworks.com>
2018-12-26 16:42:25 +02:00
michael-dev
b678ed1efc macsec: Make pre-shared CKN variable length
IEEE Std 802.1X-2010, 9.3.1 defines following restrictions for CKN:

"MKA places no restriction on the format of the CKN, save that it comprise
an integral number of octets, between 1 and 32 (inclusive), and that all
potential members of the CA use the same CKN. No further constraints are
placed on the CKNs used with PSKs, ..."

Hence do not require a 32 octet long CKN but instead allow a shorter CKN
to be configured.

This fixes interoperability with some Aruba switches, that do not accept
a 32 octet long CKN (only support shorter ones).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2018-12-25 17:29:15 +02:00
Jouni Malinen
93701b4afe tests: Allow TX/RX data test to use different frame length
This is needed for MACsec test cases with a bit shorter MTU.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-24 23:56:25 +02:00
Jouni Malinen
e422a819d0 Check snprintf result to avoid compiler warnings
These do not really get truncated in practice, but it looks like some
newer compilers warn about the prints, so silence those by checking the
result and do something a bit more useful if the output would actually
get truncated.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-24 11:09:22 +02:00
Damodaran, Rohit (Contractor)
ee98dd631a Readme for DPP
Addi a readme file for users for on-boarding devices with Device
Provisioning Protocol (DPP).

Signed-off-by: Rohit Damodaran <Rohit_Damodaran@comcast.com>
2018-12-23 17:25:11 +02:00
Andrej Shadura
c3f23ad6c7 dbus: Expose connected stations on D-Bus
Make it possible to list connected stations in AP mode over D-Bus, along
with some of their properties: rx/tx packets, bytes, capabilities, etc.

Signed-off-by: Mathieu Trudel-Lapierre <mathieu.trudel-lapierre@canonical.com>

Rebased by Julian Andres Klode <juliank@ubuntu.com> and updated to use
the new getter API.

Further modified by Andrej Shadura to not error out when not in AP mode
and to send separate StationAdded/StationRemoved signals instead of
changing signatures of existing StaAuthorized/StaDeauthorized signals.

Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-12-23 17:25:11 +02:00
Andrej Shadura
f5f4c11aa1 dbus: Use dbus_bool_t, not int for boolean function arguments
Properties argument specifies whether to add object's properties
or not, hence it doesn't need to be int.

Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
2018-12-23 17:25:11 +02:00
Sergey Matyukevich
cdeea70f59 wpa_supplicant: Allow overriding HT STBC capabilities
Allow user to override STBC configuration for Rx and Tx spatial streams.
Add new configuration options to test for HT capability overrides.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2018-12-23 17:25:11 +02:00
Jouni Malinen
0fb292c08e Add SAE to GET_CAPABILITY key_mgmt
Provide information about SAE AKM support in "GET_CAPABILITY key_mgmt"
for completeness. The "GET_CAPABILITY auth_alg" case is already
providing information about SAE support through user space SME.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 21:49:02 +02:00
Prasad, Jagadeesh (Contractor)
d2b5138116 DPP: Add self configuration command in hostapd_cli and wpa_cli
The back-end support for DPP self configuration was already present in
hostapd and wpa_supplicant. However, the command to invoke DPP self
configuration was not available in hostapd_cli and wpa_cli. Add the
command "dpp_configurator_sign" in them.

Signed-off-by: Prasad, Jagadeesh <Jagadeesh_Prasad@comcast.com>
2018-12-21 12:02:57 +02:00
Jouni Malinen
53d5de6f1d DPP: Accept DPP_CONFIGURATION_SIGN without double space before parameters
Make this command more convenient to use by not requiring two space
characters between the command and the first parameter.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-21 12:02:57 +02:00
Jouni Malinen
2a93ecc8ca Expose Multi-BSS STA capability through wpa_supplicant control interface
Indicate whether the driver advertises support for Multi-BSS STA
functionality with "GET_CAPABILITY multibss" (returns "MULTIBSS-STA" if
supported).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-20 21:30:43 +02:00
Venkateswara Naralasetty
5abc7823bd wpa_supplicant: Add Multi-AP backhaul STA support
Advertise vendor specific Multi-AP IE in (Re)Association Request frames
and process Multi-AP IE from (Re)Association Response frames if the user
enables Multi-AP fuctionality. If the (Re)Association Response frame
does not contain the Multi-AP IE, disassociate.

This adds a new configuration parameter 'multi_ap_backhaul_sta' to
enable/disable Multi-AP functionality.

Enable 4-address mode after association (if the Association Response
frame contains the Multi-AP IE). Also enable the bridge in that case.
This is necessary because wpa_supplicant only enables the bridge in
wpa_drv_if_add(), which only gets called when an interface is added
through the control interface, not when it is configured from the
command line.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2018-12-20 12:10:31 +02:00
Mathy Vanhoef
fa97981265 OCV: Include and verify OCI in WNM-Sleep Exit frames
Include and verify the OCI element in WNM-Sleep Exit Request and
Response frames. In case verification fails, the frame is silently
ignored.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Mathy Vanhoef
034388ac9c OCV: Include and verify OCI in the AMPE handshake
Include and verify the OCI element in AMPE Open and Confirm frames. Note
that the OCI element is included even if the other STA didn't advertise
support of OCV. The OCI element is only required and verified if both
peers support OCV.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Mathy Vanhoef
716ed96e8d OCV: Pass ocv parameter to mesh configuration
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Mathy Vanhoef
5c7d35ba07 Add UNPROT_DEAUTH command for testing OCV
This new wpa_supplicant control interface command can be used to
simplify testing SA Query with OCV.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Mathy Vanhoef
f91e68e903 OCV: Perform an SA Query after a channel switch
After the network changed to a new channel, perform an SA Query with the
AP after a random delay if OCV was negotiated for the association. This
is used to confirm that we are still operating on the real operating
channel of the network. This commit is adding only the station side
functionality for this, i.e., the AP behavior is not changed to
disconnect stations with OCV that do not go through SA Query.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:50:12 +02:00
Mathy Vanhoef
f9da7505bf OCV: Include and verify OCI in SA Query frames
Include an OCI element in SA Query Request and Response frames if OCV
has been negotiated.

On Linux, a kernel patch is needed to let clients correctly handle SA
Query Requests that contain an OCI element. Without this patch, the
kernel will reply to the SA Query Request itself, without verifying the
included OCI. Additionally, the SA Query Response sent by the kernel
will not include an OCI element. The correct operation of the AP does
not require a kernel patch.

Without the corresponding kernel patch, SA Query Requests sent by the
client are still valid, meaning they do include an OCI element.
Note that an AP does not require any kernel patches. In other words, SA
Query frames sent and received by the AP are properly handled, even
without a kernel patch.

As a result, the kernel patch is only required to make the client properly
process and respond to a SA Query Request from the AP. Without this
patch, the client will send a SA Query Response without an OCI element,
causing the AP to silently ignore the response and eventually disconnect
the client from the network if OCV has been negotiated to be used.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 15:42:23 +02:00
Mathy Vanhoef
6ab73efa72 OCV: Add utility functions to insert OCI elements
This commit adds utility functions to insert various encoding of the OCI
element.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-17 00:02:14 +02:00
Mathy Vanhoef
55c12f5d37 OCV: Advertise OCV capability in RSN capabilities (STA)
Set the OCV bit in RSN capabilities (RSNE) based on station mode
configuration.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:49:27 +02:00
Mathy Vanhoef
875ab60d73 OCV: Advertise OCV capability in RSN capabilities (AP)
Set the OCV bit in RSN capabilities (RSNE) based on AP mode
configuration. Do the same for OSEN since it follows the RSNE field
definitions.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:48:48 +02:00
Mathy Vanhoef
ce6829c284 OCV: Add wpa_supplicant config parameter
Add wpa_supplicant network profile parameter ocv to disable or enable
Operating Channel Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Mathy Vanhoef
138205d600 OCV: Add build configuration for channel validation support
Add compilation flags for Operating Channel Verification (OCV) support.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 20:31:21 +02:00
Mathy Vanhoef
ad20a1367f Store the VHT Operation element of an associated STA
APs and mesh peers use the VHT Operation element to advertise certain
channel properties (e.g., the bandwidth of the channel). Save this
information element so we can later access this information.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Mathy Vanhoef
4b62b52e5e Make channel_info available to the supplicant state machine
This adds the necessary functions and callbacks to make the channel_info
driver API available to the supplicant state machine that implements the
4-way and group key handshake. This is needed for OCV.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Mathy Vanhoef
7f00dc6e15 Add driver API to get current channel parameters
This adds driver API functions to get the current operating channel
parameters. This encompasses the center frequency, channel bandwidth,
frequency segment 1 index (for 80+80 channels), and so on.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@cs.kuleuven.be>
2018-12-16 18:35:30 +02:00
Jouni Malinen
fb2dc898d6 WMM AC: Fix a typo in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-08 16:50:42 +02:00
Jouni Malinen
22d8bb04d9 WMM AC: Do not write ERROR level log entries when WMM AC is not in use
These two wpa_printf() calls with MSG_ERROR level could be reached when
connecting without (Re)Association Response frame elements being
available. That would be the case for wired connections and IBSS. Those
cases are not supposed to use WMM AC in the first place, so do not
confuse logs with ERROR messages in them for normal conditions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-08 16:48:33 +02:00
Jouni Malinen
06c00e6d93 OWE: Fix OWE network profile saving
key_mgmt=OWE did not have a config parameter writer and wpa_supplicant
was unable to save such a network profile correctly. Fix this by adding
the needed parameter writer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-08 16:27:26 +02:00
Damodaran, Rohit (Contractor)
ad6a92472d DPP: Support DPP key_mgmt saving to wpa_supplicant configuration
In the existing code, there was no "DPP" string available to the DPP key
management type for configuration parser of wpa supplicant. When the
configuration is saved, the key management string was left out from the
config file. Fix this by adding support for writing key_mgmt=DPP option.

Signed-off-by: Rohit Damodaran <Rohit_Damodaran@comcast.com>
2018-12-08 16:17:48 +02:00
Jouni Malinen
3ce48c440e HS 2.0: Fix PMF-in-use check for ANQP Venue URL processing
The previous implementation did not check that we are associated with
the sender of the GAS response before checking for PMF status. This
could have accepted Venue URL when not in associated state. Fix this by
explicitly checking for association with the responder first.

This fixes an issue that was detected, e.g., with these hwsim test case
sequences:
gas_anqp_venue_url_pmf gas_anqp_venue_url
gas_prot_vs_not_prot gas_anqp_venue_url

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
f44d760cf0 HS 2.0: Enable PMF automatically for Hotspot 2.0 network profiles
Hotspot 2.0 Release 2 requires PMF to be negotiated, so enable this by
default in the network profiles created from cred blocks.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
9ce2015a97 HS 2.0: Allocate enough buffer for HS 2.0 Indication element for scan
The HS 2.0 Indication element can be up to 9 octets in length, so add
two more octets to the minimum extra_ie buffer size for scanning.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
ec2cf403b8 HS 2.0: As a STA, do not indicate release number greater than the AP
Hotspot 2.0 tech spec mandates mobile device to not indicate a release
number that is greater than the release number advertised by the AP. Add
this constraint to the HS 2.0 Indication element when adding this into
(Re)Association Request frame. The element in the Probe Request frame
continues to show the station's latest supported release number.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-12-08 14:06:58 +02:00
Jouni Malinen
f2973fa39d FT: Fix CONFIG_IEEE80211X=y build without CONFIG_FILS=y
remove_ie() was defined within an ifdef CONFIG_FILS block while it is
now needed even without CONFIG_FILS=y. Remove the CONFIG_FILS condition
there.

Fixes 8c41734e5d ("FT: Fix Reassociation Request IEs during FT protocol")
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-03 12:00:26 +02:00
Jouni Malinen
c2c6c01bb8 Update version to v2.7 and copyright years to include 2018
Also add the ChangeLog entries for both hostapd and wpa_supplicant to
describe main changes between v2.6 and v2.7.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Jouni Malinen
55570efe35 Uncomment CONFIG_LIBNL32=y in defconfig
libnl 3.2 release is much more likely to be used nowadays than the
versions using the older API, so uncomment this in wpa_supplicant and
hostapd defconfig.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 21:34:59 +02:00
Ashok Kumar
698c9e2021 OWE: Try another group only on association rejection with status 77
Do not change the OWE group if association is rejected for any other
reason than WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED to avoid
unnecessary latency in cases where the APs reject association, e.g., for
load balancing reasons.

Signed-off-by: Ashok Kumar <aponnaia@codeaurora.org>
2018-12-02 20:42:09 +02:00
Jouni Malinen
117f586b05 DPP: Remove unused wpas_dpp_remain_on_channel_cb()
This function was apparently never used at all.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 18:40:06 +02:00
Jouni Malinen
e22c23382f DPP: Apply testing configuration option to signing of own config
Previous implementation had missed this case of setting configurator
parameters.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-02 00:26:21 +02:00
Jouni Malinen
8c41734e5d FT: Fix Reassociation Request IEs during FT protocol
The previous implementation ended up replacing all pending IEs prepared
for Association Request frame with the FT specific IEs (RSNE, MDE, FTE)
when going through FT protocol reassociation with the wpa_supplicant
SME. This resulted in dropping all other IEs that might have been
prepared for the association (e.g., Extended Capabilities, RM Enabled
Capabilities, Supported Operating Classes, vendor specific additions).

Fix this by replacing only the known FT specific IEs with the
appropriate values for FT protocol while maintaining other already
prepared elements.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-12-01 22:02:55 +02:00
Jouni Malinen
3d1d469195 Fix indentation level
This gets rid of smatch warnings about inconsistent indenting.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 21:28:19 +02:00
Ashok Ponnaiah
fcb3f11e4d SAE: Fix external authentication on big endian platforms
Need to handle the little endian 16-bit fields properly when building
and parsing Authentication frames.

Fixes: 5ff39c1380 ("SAE: Support external authentication offload for driver-SME cases")
Signed-off-by: Ashok Ponnaiah <aponnaia@codeaurora.org>
2018-11-30 17:26:26 +02:00
Jouni Malinen
a00d65e79f DPP: Reject invalid no-psk/pass legacy configurator parameters
Instead of going through the configuration exchange, reject invalid
legacy configurator parameters explicitly. Previously, configuring
legacy (psk/sae) parameters without psk/pass resulted in a config object
that used a zero length passphrase. With this change, that config object
is not sent and instead, either the initialization attempts is rejected
or the incoming initialization attempt is ignored.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-30 17:14:49 +02:00
Cedric Izoard
18a0508a41 external-auth: Check key_mgmt when selecting SSID
When selecting SSID to start external authentication procedure also
check the key_mgmt field as several network configuration may be defined
for the same SSID/BSSID pair. The external authentication mechanism is
only available for SAE.

Signed-off-by: Cedric Izoard <cedric.izoard@ceva-dsp.com>
2018-11-26 19:09:25 +02:00
Jouni Malinen
931f7ff656 DPP: Fix GAS client error case handling
The GAS client processing of the response callback for DPP did not
properly check for GAS query success. This could result in trying to
check the Advertisement Protocol information in failure cases where that
information is not available and that would have resulted in
dereferencing a NULL pointer. Fix this by checking the GAS query result
before processing with processing of the response.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-25 13:33:39 +02:00
Lubomir Rintel
d7591aab85 dbus: Expose availability of SHA384 on D-Bus
This lets us know whether we can attempt to use FT-EAP-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
eb7e747931 dbus: Expose availability of FT on D-Bus
This lets us know whether we can attempt to use FT-PSK, FT-EAP,
FT-EAP-SHA384, FT-FILS-SHA256 or FT-FILS-SHA384.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:18:25 +02:00
Lubomir Rintel
59d59eb0e0 Revert "D-Bus: Implement Pmf property"
This reverts commit adf8f45f8a.

It is basically all wrong. The Pmf property did exist, with a signature of
"s" as documented in doc/dbus.doxygen. It was synthesized from
global_fields[].

The patch added a duplicate one, with a signature of "u", in violation
of D-Bus specification and to bemusement of tools that are careful
enough:

  $ busctl introspect fi.w1.wpa_supplicant1 /fi/w1/wpa_supplicant1/Interfaces/666
  Duplicate property

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2018-11-24 18:03:55 +02:00
Jouni Malinen
4929d556cc mesh: Add Category and Action field to maximum buffer length
Make the buf_len calculation match more closely with the following
wpa_buf*() operations. The extra room from the existing elements was
apparently sufficiently large to cover this, but better add the two
octet header explicitly.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-11-24 13:36:54 +02:00
Bob Copeland
25778502d5 mesh: Fix off-by-one in buf length calculation
The maximum size of a Mesh Peering Management element in the case
of an AMPE close frame is actually 24 bytes, not 23 bytes, plus the
two bytes of the IE header (IEEE Std 802.11-2016, 9.4.2.102). Found by
inspection.

The other buffer components seem to use large enough extra room in their
allocations to avoid hitting issues with the full buffer size even
without this fix.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
2018-11-24 13:30:28 +02:00
Davide Caratti
2b7f46f1c7 examples: Fix shellcheck warnings in wps-ap-cli
use 'printf' instead of 'echo -n', to suppress the following warning:

In POSIX sh, echo flags are undefined. [SC2039]

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2018-11-22 15:53:30 +02:00
Jouni Malinen
dc673aec46 HS 2.0: Generate AssocReq OSEN IE based on AP advertisement
Parse the OSEN IE from the AP to determine values used in the AssocReq
instead of using hardcoded cipher suites. This is needed to be able to
set the group cipher based on AP advertisement now that two possible
options exists for this (GTK_NOT_USED in separate OSEN BSS; CCMP or
GTK_NOT_USED in shared BSS case). Furthermore, this is a step towards
allowing other ciphers than CCMP to be used with OSEN.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-11-09 18:07:16 +02:00
Jouni Malinen
d514b50265 WNM: Collocated Interference Reporting
Add support for negotiating WNM Collocated Interference Reporting. This
allows hostapd to request associated STAs to report their collocated
interference information and wpa_supplicant to process such request and
reporting. The actual values (Collocated Interference Report Elements)
are out of scope of hostapd and wpa_supplicant, i.e., external
components are expected to generated and process these.

For hostapd/AP, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration. STAs are requested to perform
reporting with "COLOC_INTF_REQ <addr> <Automatic Report Enabled> <Report
Timeout>" control interface command. The received reports are indicated
as control interface events "COLOC-INTF-REPORT <addr> <dialog token>
<hexdump of report elements>".

For wpa_supplicant/STA, this mechanism is enabled by setting
coloc_intf_reporting=1 in configuration and setting Collocated
Interference Report Elements as a hexdump with "SET coloc_intf_elems
<hexdump>" control interface command. The hexdump can contain one or
more Collocated Interference Report Elements (each including the
information element header). For additional testing purposes, received
requests are reported with "COLOC-INTF-REQ <dialog token> <automatic
report enabled> <report timeout>" control interface events and
unsolicited reports can be sent with "COLOC_INTF_REPORT <hexdump>".

This commit adds support for reporting changes in the collocated
interference (Automatic Report Enabled == 1 and partial 3), but not for
periodic reports (2 and other part of 3).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-30 14:07:51 +02:00
Ilan Peer
170244a1cd SME: Fix order of WPA IE in association request
In case that the protocol used for association is WPA the WPA IE was
inserted before other (non vendor specific) IEs. This is not in
accordance to the standard that states that vendor IEs should be placed
after all the non vendor IEs are placed. In addition, this would cause
the low layers to fail to properly order information elements.

To fix this, if the protocol used is WPA, store the WPA IE and reinsert
it after all the non vendor specific IEs were placed.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-20 11:26:13 +03:00
Andrei Otcheretianski
ac0ac1ddfd wpa_supplicant: Fix buffer overflow in roaming_consortiums
When configuring more than 36 roaming consortiums with SET_CRED, the
stack is smashed. Fix that by correctly verifying the
num_roaming_consortiums.

Fixes: 909a948b ("HS 2.0: Add a new cred block parameter roaming_consortiums")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2018-10-14 20:47:35 +03:00
Ilan Peer
c04562e67e OWE: Improve discovery of OWE transition mode AP
An OWE AP device that supports transition mode does not transmit the
SSID of the OWE AP in its Beacon frames and in addition the OWE AP does
not reply to broadcast Probe Request frames. Thus, the scan results
matching relies only on Beacon frames from the OWE open AP which can be
missed in case the AP's frequency is actively scanned.

To improve the discovery of transition mode APs, include their SSID in
the scan command to perform an active scan for the SSIDs learned from
the open mode BSSs.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2018-10-12 19:59:26 +03:00
Jouni Malinen
a5e6270f25 OWE: Use shorter scan interval during transition mode search
Start scans more quickly if an open BSS advertising OWE transition mode
is found, but the matching OWE BSS has not yet been seen.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 19:59:26 +03:00
Sunil Dutt
91073ccaaa OWE: Attempt more scans for OWE transition SSID if expected BSS not seen
This commit introduces a threshold for OWE transition BSS selection,
which signifies the maximum number of selection attempts (scans) done
for finding OWE BSS.

This aims to do more scan attempts for OWE BSS and eventually select the
open BSS if the selection/scan attempts for OWE BSS exceed the
configured threshold.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-12 19:59:26 +03:00
Jouni Malinen
baf4c86379 HS 2.0: Request and process OSU Providers NAI List ANQP-element
Extend wpa_supplicant to use a separate OSU_NAI information from OSU
Providers NAI List ANQP-element instead of the OSU_NAI information from
OSU Providers list ANQP-element when connecting to the shared BSS
(Single SSID) for OSU.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-05 20:51:51 +03:00
Purushottam Kushwaha
cf94626c50 OWE: Do not try to enable PMF for non-RSN associations
Explicitly set the PMF configuration to 0 (NO_MGMT_FRAME_PROTECTION) for
non-RSN associations. This specifically helps with OWE transition mode
when the network block is configured with PMF set to required, but the
BSS selected is in open mode. There is no point to try to enable PMF for
such an association.

This fixes issues with drivers that use the NL80211_ATTR_USE_MFP
attribute to set expectations for PMF use. The combination of non-RSN
connection with claimed requirement for PMF (NL80211_MFP_REQUIRED) could
cause such drivers to reject the connection in OWE transition mode.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-10-04 00:26:41 +03:00
Srinivas Dasari
50b77f50e8 DPP: Flush PMKSA if an assoc reject without timeout is received
Flush the PMKSA upon receiving assoc reject event without timeout
in the event data, to avoid trying the subsequent connections
with the old PMKID. Do not flush PMKSA if assoc reject is
received with timeout as it is generated internally from the
driver without reaching the AP.

This extends commit d109aa6cac ("SAE:
Flush PMKSA if an assoc reject without timeout is received") to handle
also the DPP AKM.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-18 13:15:20 +03:00
Jouni Malinen
3ecb8a5203 ANQP: Parse and report Venue URL information
Parse the Venue URL ANQP-element payload and report it with the new
RX-VENUE-URL event messages if the query was done using PMF.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-15 05:17:49 +03:00
Jouni Malinen
075926ec71 HS 2.0: Add alternative OSU_SSID into providers info file
This adds the second SSID (the one used by the shared BSS) for OSU
connection when generating osu-providers.txt. External tools can use
that to configure multiple network profiles for OSU to cover the cases
where transition mode is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-09-12 02:52:50 +03:00
Beni Lev
077232f603 OCE: Add OCE capability attribute only when associating to an OCE AP
Signed-off-by: Beni Lev <beni.lev@intel.com>
2018-09-02 18:16:30 +03:00
Roee Zamir
2ac4333404 OCE: Send scan parameters when OCE_STA functionality is enabled
If the device supports OCE features and OCE is enabled, set the relevant
scan parameters and FILS Request Parameters element with Max Channel
Time.

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
2018-09-02 18:08:51 +03:00
Roee Zamir
938dd97a84 driver: Add OCE scan parameters
Add a flag to scan parameters that enables OCE scan features. If this
flag is set the device should enable the following features as defined
in the Optimized Connectivity Experience Technical Specification v1.0:
- Overwrite FILS request Max Channel Time with actual value (clause 3.8)
- Send Probe Request frame in high rate (at least 5.5 Mbps) (clause 3.12)
- Probe Request frame Transmission Deferral and Suppression (clause 3.5)
- Accept broadcast Probe Response frame (clause 3.6)

Signed-off-by: Roee Zamir <roee.zamir@intel.com>
2018-09-02 17:53:32 +03:00
Purushottam Kushwaha
20f612d998 DPP: Set group id through DPP_AUTH_INIT or dpp_configurator_params
This enhances DPP_AUTH_INIT, DPP_CONFIGURATOR_SIGN, and SET
dpp_configurator_params to allow optional setting of the DPP groupId
string for a Connector. If the value is not set, the previously wildcard
value ("*") is used by default.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-30 23:34:00 +03:00
Ankita Bajaj
af835d75b7 FILS: Fix FILS connect failures after ERP key invalidation
If the RADIUS authentication server dropped the cached ERP keys for any
reason, FILS authentication attempts with ERP fails and the previous
wpa_supplicant implementation ended up trying to use the same keys for
all consecutive attempts as well. This did not allow recovery from state
mismatch between the ERP server and peer using full EAP authentication.

Address this by trying to use full (non-FILS) authentication when trying
to connect to an AP using the same ERP realm with FILS-enabled network
profile if the previous authentication attempt had failed. This allows
new ERP keys to be established and FILS authentication to be used again
for the consecutive connections.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-24 16:27:34 +03:00
Jouke Witteveen
1e1245bc8b Fix QoS Mapping ext capab bit setting
Fix the typo in using WPA_DRIVER_FLAGS_QOS_MAPPING to set the QoS Map
bit in Extended Capabilities. The previous implementation ended up
adding this bit even if the driver did not actually indicate support for
the capability.

Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
2018-08-12 16:35:31 +03:00
Jouni Malinen
ecec4878b7 Provide more details of WPA3 modes in wpa_supplicant.conf
Clarify that proto=RSN is used for WPA3 and add the WPA3-Personal name
for SAE and include OWE as a possible key_mgmt value.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-08-01 17:55:50 +03:00
Jouni Malinen
e8cf9fc33f P2P: Use more compact debug print of common group frequencies
Print the list of frequencies on a single line instead of one line per
frequency.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 22:28:05 +03:00
Jouni Malinen
26eac0a998 P2P: Improve common group channel selection if GO needs to be moved
Prefer channels that support VHT80 (and secondarily, HT40 on the same
band) over other common group channels. If no such channel is found,
prefer any channel that uses the same band so that CSA can be used. This
improves the case where a P2P GO needs to move to another channel and
there is no other reason (e.g., preferred channel from the driver or an
already used channel from a virtual interface sharing the same radio) to
pick a specific channel.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 22:28:05 +03:00
Jouni Malinen
616178a2ad P2P/AP: More detailed debug prints on HT/VHT parameter selection
This makes it easier to debug why wpa_supplicant selects particular
HT/VHT parameters for AP/P2P GO mode.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-06-15 21:40:43 +03:00
Jouni Malinen
88bf44be42 FT: Fix potential NULL pointer dereference in MDE addition
The bss variable in this function might be NULL, so make the FT MDE
addition case conditional on a BSS entry being available.

Fixes: 3dc3afe298 ("FT: Add MDE to assoc request IEs in connect params")
Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
d8e8c992cd FT: Add key management value FT-EAP-SHA384 for wpa_supplicant
This allows wpa_supplicant to be configuted to use the SHA384-based FT
AKM.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 20:16:37 +03:00
Jouni Malinen
8c2715b358 FT: Connection settings for SHA384-based AKM
Extend wpa_supplicant to allow SHA384-based FT AKM to be selected for a
connection.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-06-05 19:29:53 +03:00
Sven Eckelmann
20c2ea412a wpa_supplicant: Fix parsing of max_oper_chwidth
The max_oper_chwidth is parsed in wpa_config_set as INT_RANGE (see
ssid_fields). The actual parsing for INT_RANGE is done by
wpa_config_parse_int which can only store the result as full integer.

max_oper_chwidth is stored as u8 (a single byte) in wpa_ssid. This means
that on little endian systems, the least significant byte of the parsed
value are really stored in the max_oper_chwidth. But on big endian
system, the only most significant byte is stored as max_oper_chwidth.
This means that 0 is always stored because the provided range doesn't
allow any other value for systems with multi-byte-wide integers.

This also means that for common systems with 4-byte-wide integers, the
remaining 3 bytes were written after the actual member of the struct.
This should not have influenced the behavior of succeeding members
because these bytes would have been part of the padding between the
members on most systems.

Increasing its size to a full int fixes the write operations outside of
the member and allows to use the max_oper_chwidth setting on big endian
systems.

Fixes: 0f29bc68d1 ("IBSS/mesh: Add support for VHT80P80 configuration")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-05-31 16:14:28 +03:00
Felix Fietkau
8fd29a0439 mesh: Fix crash with CONFIG_TAXONOMY enabled
wpa_s->ifmsh needs to be allocated using hostapd_alloc_iface() instead
of a direct call to os_zalloc(), otherwise the linked list for station
taxonomy items remains uninitialized, leading to a crash on the first
attempt to traverse that list

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-05-31 13:06:07 +03:00
Jouni Malinen
f5a602168f HS 2.0: Allow OSEN connection to be used in an RSN BSS
This allows a single BSS/SSID to be used for both data connection and
OSU. In wpa_supplicant configuration, the current proto=OSEN
key_mgmt=OSEN combination is now allowing both the old separate OSEN
BSS/IE and the new RSN-OSEN to be used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-29 23:34:22 +03:00
Jouni Malinen
833bb2ab15 FT: Disable PMKSA caching with FT
PMKSA caching with FT is not fully functional, so disable the case for
now, so that wpa_supplicant does not end up trying to connect with a
PMKSA cache entry from another AKM. FT-EAP was already modified long
time ago to not add PMKSA cache entries itself.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-21 22:18:50 +03:00
Jouni Malinen
9be19d0b9c SAE: Add support for using the optional Password Identifier
This extends the SAE implementation in both infrastructure and mesh BSS
cases to allow an optional Password Identifier to be used. This uses the
mechanism added in P802.11REVmd/D1.0. The Password Identifier is
configured in a wpa_supplicant network profile as a new string parameter
sae_password_id. In hostapd configuration, the existing sae_password
parameter has been extended to allow the password identifier (and also a
peer MAC address) to be set. In addition, multiple sae_password entries
can now be provided to hostapd to allow multiple per-peer and
per-identifier passwords to be set.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:30:29 +03:00
Jouni Malinen
d6a65a83fb mesh: Register msg_ctx for hostapd/AP code
The use of hostapd code for a mesh interface did not register
hapd->msg_ctx. This needs to be done similarly to the existing cases in
wpa_supplicant AP and IBSS mode uses so that wpa_msg() calls from the
hostapd/AP code get delivered properly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-19 17:22:48 +03:00
Jouni Malinen
ffff7f7095 OWE: Mark connection failed in the unlikely no-bss-entry case
If no BSS entry can be found when processing association rejected event
from the driver for the special OWE case of unsupported
finite-cyclic-group, process the event as a connection failure instead
of just skipping the the OWE retry with another DH group.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 19:01:23 +03:00
Jouni Malinen
0cc41ee635 Move wpa_supplicant_event() EVENT_ASSOC_REJECT handling into a function
This cleans up the implementation a bit by making this functionality
easier to understand.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 18:52:17 +03:00
Srinivas Dasari
16d5c9637c OWE: Get the bss from bssid of assoc_reject to try for next group
On an assoc_reject from the BSS with the status=77, a connection attempt
with the next supported group happens. The BSS considered here is from
current_bss which may be NULL at this point of time with SME-in-driver
case. Address this by getting the BSS from the bssid obtained in
association reject indication and skip the step if no BSS entry can be
found.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Srinivas Dasari
d109aa6cac SAE: Flush PMKSA if an assoc reject without timeout is received
Flush the PMKSA upon receiving association reject event without timeout
in the event data in SME-in-driver case to avoid trying to use the old
PMKSA entry in subsequent connection attempts. Do not flush PMKSA if
association reject is received with timeout as it is generated
internally from the driver without reaching the AP. This is similar to
the SME-in-wpa_supplicant case that was already addressed within
sme_event_assoc_reject().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:54 +03:00
Jouni Malinen
ce2a9644bd Silence a gcc warning on switch statement fallthrough
Add an explicit comment noting a previously undocumented fallthrough to
not trigger an implicit-fallthrough warning.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-16 01:16:35 +03:00
Jouni Malinen
d267bdf9bd Silence new gcc warnings on switch statement fallthroughs
Reword the comments to make gcc 8.1 recognize these as designed cases
and not trigger implicit-fallthrough warnings.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-05-15 20:55:17 +03:00
Ahmad Masri
60a5737e8f FT: Clear SME FT data on disassoc
SME ft_used flag is sometimes not cleared on disassoc. For example,
after initial FT connection, ft_used is set while ft_ies stays NULL.
Later on, upon disassoc, sme_update_ft_ies() is not invoked and ft_used
is not cleared. Fix this by invoking sme_update_ft_ies() also in case
ft_used is set.

This is needed to fix an issue with drivers that use nl80211 Connect API
with FT and expect to the NL80211_AUTHTYPE_OPEN specified in the Connect
command for the initial mobility domain association.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-05-04 20:56:52 +03:00
Bhagavathi Perumal S
d57e06170b wpa_supplicant: Make channel switch event available for non-AP builds
This allows user to get channel switch indication in station mode even
if wpa_supplicant is built without CONFIG_AP=y.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-05-04 20:31:23 +03:00
Bhagavathi Perumal S
d7f038ded2 wpa_supplicant: Add ieee80211ac information in STATUS
This allows user to get current operating mode of station.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-05-04 20:18:55 +03:00
Sean Parkinson
ab35793ec1 wolfSSL: Fix EAP-FAST key derivation
Implement tls_connection_get_eap_fast_key() using cryptographic
primitives as wolfSSL implements different spec.

Signed-off-by: Sean Parkinson <sean@wolfssl.com>
2018-05-02 13:32:51 +03:00
Jouni Malinen
bbbc7e8016 EAP-TLS: Extend TLS version config to allow TLS v1.3 to be disabled
This may be needed to avoid interoperability issues with the new
protocol version and significant changes for EAP use cases in both key
derivation and handshake termination.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-05-01 22:13:38 +03:00
Jouni Malinen
625a8c86ba wpa_cli: Indicate HS20-T-C-ACCEPTANCE to action scripts
This can be used to start a web browser to go through Terms and
Conditions acknowledgment.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-29 20:02:13 +03:00
mazumdar
d239ab3962 DFS: Mark channels required DFS based on reg-domain info from the driver
Mark a channel as required DFS based on regulatory information received
from the driver/kernel rather than deciding based on hardcoded
boundaries on the frequency. Previously few channels were being marked
as requiring DFS even though they were non-DFS in a particular country.

If the driver does not provide channel list information, fall back to
the previously used frequency-based determination.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
7fc6a024f9 HS 2.0: Process received Terms and Conditions Acceptance notification
Extend wpa_supplicant WNM-Notification RX handling to parse and process
received Terms and Conditions Acceptance notifications. If PMF is
enabled for the association, this frame results in control interface
indication (HS20-T-C-ACCEPTANCE <URL>) to get upper layers to guide the
user through the required acceptance steps.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:47 +03:00
Jouni Malinen
72b6e5d1e2 Do not remove CCMP group cipher if any CCMP/GCMP cipher is enabled
CCMP group cipher was removed if CCMP was not allowed as a pairwise
cipher when loading a configuration file (but not actually when changing
configuration during runtime). This is needed to avoid issues with
configurations that use the default group cipher (TKIP CCMP) while
modifying pairwise cipher from the default CCMP TKIP) to TKIP. However,
there is not really a need to remove the CCMP group cipher if any GCMP
or CCMP cipher is enabled as a pairwise cipher.

Change the network profile validation routine to not remove CCMP as
group cipher if CCMP-256, GCMP, or GCMP-256 is enabled as a pairwise
cipher even if CCMP is not.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-24 00:35:43 +03:00
Tova Mussai
c4315e6620 AP: Handle AP initalization failure in async flow
When AP initialization is completed in a callback (e.g., OBSS scan),
wpa_supplicant_deinit_ap() is not called in case of failure. Fix this by
calling setup_complete_cb in case of failure, too, which in turn calls
wpa_supplicant_deinit_ap() if needed.

Signed-off-by: Tova Mussai <tova.mussai@intel.com>
2018-04-20 00:48:49 +03:00
Ahmad Masri
86c998d37a FT: Add FT auth algorithm to connect params when roaming
Add WPA FT auth to connect params in case of a re-connection to ESS
supporting FT when FT was used in the first connect.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:35:41 +03:00
Ahmad Masri
3dc3afe298 FT: Add MDE to assoc request IEs in connect params
Add MDE (mobility domain element) to Association Request frame IEs in
the driver assoc params. wpa_supplicant will add MDE only if the network
profile allows FT, the selected AP supports FT, and the mobility domain
ID matches.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2018-04-20 00:32:49 +03:00
Bhagavathi Perumal S
b55c623e4c Make CENTER_FRQ1 available independently in SIGNAL_POLL
This allows user to get center frequency and find secondary channel
offset.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
2018-04-20 00:10:45 +03:00
Jouni Malinen
4204669c69 HS 2.0: Add Roaming Consortium Selection element into AssocReq
This makes wpa_supplicant add Hotspot 2.0 Roaming Consortium Selection
element into (Re)Association Request frames if the network profile
includes roaming_consortium_selection parameter.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-18 01:12:25 +03:00
Jouni Malinen
6311547e7b HS 2.0: Add Roaming Consortium Selection network profile parameter
This adds new roaming_consortium_selection network profile parameter
into wpa_supplicant. This is used to store the OI that was used for
network selection (INTERWORKING_SELECT) based on matching against the
Roaming Consortium OIs advertised by the AP. This can also be used when
using an external component to perform selection.

This commit adds the network profile parameter, but does not yet include
it in (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:56 +03:00
Jouni Malinen
5b7695275c HS 2.0: Use roaming_consortiums list to match OIs for access
This extends Hotspot 2.0 credential matching to consider the
roaming_consortiums parameter when determining whether the cred block
matches the information advertised by an AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 17:26:53 +03:00
Jouni Malinen
909a948b0f HS 2.0: Add a new cred block parameter roaming_consortiums
This new string parameter contains a comma delimited list of OIs
(hexdump) in a string. This is used to store Hotspot 2.0
PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI. This commit
includes the configuration changes to parse and write the parameter. The
actual values are not yet used in Interworking network selection.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:47 +03:00
Jouni Malinen
9b6f93e4d6 HS 2.0: Document credential parameter required_roaming_consortium
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:47 +03:00
Jouni Malinen
6a8a04d742 HS 2.0: Add fetching of Operator Icon Metadata ANQP-element
This extends wpa_supplicant Hotspot 2.0 ANQP routines to allow the
Operator Icon Metadata ANQP-element to be fetched with "ANQP_GET <bssid>
hs20:12". The result is available in the new hs20_operator_icon_metadata
entry in the "BSS <bssid>" output.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-04-17 16:40:42 +03:00
Dmitry Lebed
37547ad63c wpa_supplicant: Increase authentication timeout if CAC is started
Timeout is increased by dfs_cac_ms from channel data, or by max CAC time
(10 minutes) if dfs_cac_ms is not defined. This is needed for some more
complex cases, e.g., when STA is acting as an active slave with DFS
offload enabled and decided to start CAC after receiving CONNECT
command, in such a case the 10 second timeout is too small and
wpa_supplicant need to wait for CAC completion or CAC timeout (up to 10
minutes).

Without such timeout modification wpa_supplicant will be unable to
connect to an AP on DFS channel, since the default authentication
timeout (10 s) is smaller than the minimum CAC time (60 s).

Tested with nl80211 DFS offload implementation.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2018-04-15 22:20:49 +03:00
Dmitry Lebed
2dd5fbbff8 wpa_supplicant: Rename wpas_event_*() to wpas_ap_event_*()
Rename DFS event handling functions, since they are located in ap.c and
refer to AP-mode only. Needed to add some STA-mode DFS event handling.

Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
2018-04-15 22:07:09 +03:00
Jouni Malinen
a2ab37308a Fix sae_password documentation in wpa_supplicant to refer correct field
sae_password replaces psk, not passphrase, parameter in wpa_supplicant.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-13 12:09:33 +03:00
Daniel Golle
d5906fbb72 mesh: Properly handle sae_password
The recently introduced sae_password parameter was only handled properly
in wpa_supplicant/sme.c while wpa_supplicant/mesh.c assumed that
ssid->passphrase exclusively holds the secret.

Import the logic from sme.c to mesh.c to allow having only sae_password
set which otherwise throws this error:
AP-ENABLED
mesh: Passphrase for SAE not configured

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-04-13 12:09:33 +03:00
Jouni Malinen
852b2f2738 SAE: Only allow SAE AKMP for PMKSA caching attempts
Explicitly check the PMKSA cache entry to have matching SAE AKMP for the
case where determining whether to use PMKSA caching instead of new SAE
authentication. Previously, only the network context was checked, but a
single network configuration profile could be used with both WPA2-PSK
and SAE, so should check the AKMP as well.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-09 19:34:44 +03:00
Jouni Malinen
06b1a10434 SAE: Fix default PMK configuration for PMKSA caching case
The RSN supplicant state machine PMK was set based on WPA PSK even for
the cases where SAE would be used. If the AP allows PMKSA caching to be
used with SAE, but does not indicate the selected PMKID explicitly in
EAPOL-Key msg 1/4, this could result in trying to use the PSK instead of
SAE PMK. Fix this by not setting the WPA-PSK as default PMK for SAE
network profiles and instead, configuring the PMK explicitly from the
found PMKSA cache entry.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-09 13:10:08 +03:00
Jouni Malinen
66dbc8d9c3 Add more debug prints for wpa_sm_set_pmk() calls
Couple of these were not preceded by wpa_hexdump_key(PSK) which made it
more difficult to interpret the debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-08 19:11:07 +03:00
Jouni Malinen
ee2c6bb5e5 Remove CONFIG_IEEE80211R_AP=y build option from wpa_supplicant
There is no existing mechanism for setting up AP mode functionality with
FT enabled, so there is not really much point in having a build option
for trying to include the AP-to-AP FT functionality into wpa_supplicant
either. Since this build option results in failures to complete the
build, simply remove it completely. This can be restored if there is
ever desire to enable FT functionality in wpa_supplicant controlled AP
mode.

Signed-off-by: Jouni Malinen <j@w1.fi>
2018-04-02 17:00:45 +03:00
Davide Caratti
d89edb6112 wpa_supplicant: Don't reply to EAPOL if pkt_type is PACKET_OTHERHOST
When wpa_supplicant is running on a Linux interface that is configured in
promiscuous mode, and it is not a member of a bridge, incoming EAPOL
packets are processed regardless of the Destination Address in the frame.
As a consequence, there are situations where wpa_supplicant replies to
EAPOL packets that are not destined for it.

This behavior seems undesired (see IEEE Std 802.1X-2010, 11.4.a), and can
be avoided by attaching a BPF filter that lets the kernel discard packets
having pkt_type equal to PACKET_OTHERHOST.

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2018-04-02 12:21:27 +03:00
Vasyl Vavrychuk
8fb2b35735 Clean up setting of iface->p2p_mgmt flag
Previously we set this flag to one in wpa_supplicant_init_iface() if
Wi-Fi controller does not have a dedicated P2P-interface.

This setting had effect only in scope of wpa_supplicant_init_iface() and
it contradicts with comment to struct wpa_interface::p2p_mgmt field.
This comment says that this flag is used only if Wi-Fi controller has
dedicated P2P-device interface.

Also it contradicts with usage of similiar p2p_mgmt field in struct
wpa_supplicant. Again struct wpa_supplicant::p2p_mgmt is set only for
dedicated P2P-device interface.

After this change wpa_interface become input argument to
wpa_supplicant_init_iface() that we are not modifying.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-04-02 12:13:59 +03:00
Vasyl Vavrychuk
d53401c54b dbus: Redirect signal processing to the management device if present
This fixes sending of FindStopped, GroupFormationFailure, and
InvitationReceived signals in the case of separate P2P-Device interface.
This extends the coverage of the earlier commit
745d62322b ("dbus: Redirect P2P request to
the managment device if present") to these three functions that were
missing the redirection.

Some wireless controllers might have separate P2P-Device interface, see
as example result of 'iw dev':

phy#0
        Unnamed/non-netdev interface
                ...
                type P2P-device
                ...
        Interface wlp2s0
                type managed
                ...

In this case there is separate 'struct wpa_supplicant' created for this
p2p-dev-* device as result of 'wpa_supplicant_add_iface >
wpas_p2p_add_p2pdev_interface > wpa_supplicant_add_iface'.

This instance of wpa_supplicant is not registered in D-Bus
(wpas_dbus_register_*) since for corresponding P2P device interface flag
'struct wpa_interface > p2p_mgmt' is set.

But this instance is saved in p2p_init_wpa_s and is used for handling
P2P related D-Bus commands. Therefore we should look for D-Bus path in
the parent of p2p_init_wpa_s instance.

Without this change test dbus_p2p_discovery starts failing if we set
support_p2p_device in vm-run.sh.

Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com>
2018-04-02 12:02:13 +03:00
Masashi Honma
e480212765 dbus: Add FILS to global capabilities
If any of the interfaces supports FILS (and similarly for FILS-SK-PFS),
include the "fils" (and "fils_sk_pfs") capability in D-Bus information.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2018-04-02 11:56:06 +03:00
Jaap Keuter
208263c014 Add config information related to MACsec
Add examples of relevant top level CONFIG clauses for wpa_supplicant
MACsec support to defconfig.

Extend the example of MACsec related network configuration. Also bring
them in line with the format of the other example network configurations.

Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
2018-04-01 21:58:57 +03:00
Saurav Babu
e360010c3a dbus: Add mesh to global capabilities
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
2018-04-01 21:52:56 +03:00
Ahmed ElArabawy
45f7574d31 Propagate the EAP method error code
In the current implementation, upon an EAP method failure, followed by
an EAP failure, the EAP Status is propagated up in wpa_supplicant with a
general failure parameter string "failure". This parameter is used for a
notification on the dbus.

This commit reports the EAP method failure error code in a separate
callback.

The solution in this commit is generic to all EAP methods, and can be
used by any method that need to pass its error code. However, this
commit only implements the reporting for EAP-SIM and EAP-AKA methods
where the Notification Code (in AT_NOTIFICATION) is used as the method
specific error code value.

Signed-off-by: Ahmed ElArabawy <arabawy@google.com>
2018-03-31 11:57:33 +03:00
Beniamino Galvani
77a020a118 wpa_supplicant: Fix auth failure when the MAC is updated externally
When connecting to a WPA-EAP network and the MAC address is changed
just before the association (for example by NetworkManager, which sets
a random MAC during scans), the authentication sometimes fails in the
following way ('####' logs added by me):

wpa_supplicant logs:
 wlan0: WPA: RX message 1 of 4-Way Handshake from 02:00:00:00:01:00 (ver=1)
 RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: PMKID in EAPOL-Key - hexdump(len=22): dd 14 00 0f ac 04 d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 RSN: PMKID from Authenticator - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 wlan0: RSN: no matching PMKID found
 EAPOL: Successfully fetched key (len=32)
 WPA: PMK from EAPOL state machines - hexdump(len=32): [REMOVED]
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 66 20 cf ab 8c dc
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): ea 73 67 b1 8e 5f 18 43 58 24 e8 1c 47 23 87 71
 RSN: Replace PMKSA entry for the current AP and any PMKSA cache entry that was based on the old PMK
 nl80211: Delete PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKSA cache entry free_cb: 02:00:00:00:01:00 reason=1
 RSN: Added PMKSA cache entry for 02:00:00:00:01:00 network_ctx=0x5630bf85a270
 nl80211: Add PMKID for 02:00:00:00:01:00
 wlan0: RSN: PMKID mismatch - authentication server may have derived different MSK?!

hostapd logs:
 WPA: PMK from EAPOL state machine (MSK len=64 PMK len=32)
 WPA: 02:00:00:00:00:00 WPA_PTK entering state PTKSTART
 wlan1: STA 02:00:00:00:00:00 WPA: sending 1/4 msg of 4-Way Handshake
 #### WPA: rsn_pmkid():
 #### WPA: aa              - hexdump(len=6): 02 00 00 00 01 00
 #### WPA: spa             - hexdump(len=6): 02 00 00 00 00 00
 #### WPA: PMK             - hexdump(len=32): b5 24 76 4f 6f 50 8c f6 a1 2e 24 b8 07 4e 9a 13 1b 94 c4 a8 1f 7e 22 d6 ed fc 7d 43 c7 77 b6 f7
 #### WPA: computed PMKID  - hexdump(len=16): d8 21 9d a5 73 98 88 26 ef 03 d2 ce f7 04 7d 23
 WPA: Send EAPOL(version=1 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=22 keyidx=0 encr=0)

That's because wpa_supplicant computed the PMKID using the wrong (old)
MAC address used during the scan. wpa_supplicant updates own_addr when
the interface goes up, as the MAC can only change while the interface
is down. However, drivers don't report all interface state changes:
for example the nl80211 driver may ignore a down-up cycle if the down
message is processed later, when the interface is already up. In such
cases, wpa_supplicant (and in particular, the EAP state machine) would
continue to use the old MAC.

Add a new driver event that notifies of MAC address changes while the
interface is active.

Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
2018-03-30 12:16:42 +03:00
Jouni Malinen
64624f31cf OWE: Fix CONFIG_OWE=y build without CONFIG_IEEE80211R=y
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-03-26 12:34:36 +03:00