Commit graph

4773 commits

Author SHA1 Message Date
Jouni Malinen 09491b7392 wpaspy: Add native Python implementation of ctrl_iface access
This can be used as a replacement for the wpaspy.c module that uses
wpa_ctrl.c to access wpa_supplicant/hostapd control interface. Only
the UNIX domain socket version of the control interface is currently
supported.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-19 01:53:09 +02:00
Jouni Malinen 52728dcd25 P2P: Stop P2P_PD_DURING_FIND wait on PD Response RX
Previously, P2P_PD_DURING_FIND state was scheduled for 200 ms and the
P2P state was not change until that timeout regardless of whether the PD
Response for recieved or not. There is no need to wait for that timeout
if the response is received, so allow the next operation to be performed
immediately after the response has been processed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 20:31:47 +02:00
Jouni Malinen 4441b9d571 tests: Use social channel scan to speed up tests
The discovery and group formation test cases do not need to run the full
scan as the first step, so get rid of it to make the tests complete more
quickly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:36:12 +02:00
Jouni Malinen 407be00b6c P2P: Postpone P2P scan only if station mode scan is pending
sta_scan_pending was supposed to be accurate enough for determining
whether a P2P scan needs to be postponed. However, it has turned out
that there were cases where sta_scan_pending was not cleared properly.
While the known cases have now been addressed, it is possible that some
other cases may still exist. To avoid issues with P2P operationg getting
stuck, verify more carefully that there is a real pending station mode
scan (either in progress or scheduled to be requested).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen cfd31b5026 Use special scan result processing steps only on requesting interface
Scan result events are shared between all virtual interfaces sharing the
same radio. However, some of the steps are not really appropriate on
virtual interfaces that did not issue the scan request. Fix this by
making these steps conditional on the scan results being processed on
the interface that requested them.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen b1cd021e29 P2P: Re-start P2P operation if station mode scanning is stopped
There were couple of code paths that could end up stopping station mode
scanning without clearing sta_scan_pending. This could result in P2P
search getting stuck waiting for completion of station mode scan which
would never show up. Fix this by calling wpas_p2p_continue_after_scan()
in cases where station mode scans are stopped. This allows
sta_scan_pending to be cleared and P2P search operation continued.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen f85f545e71 P2P: Use common function for re-starting P2P scan after station scan
Make the implementation more consistent and cleaner by using a single
function for addressing all the cases where completion of a station mode
scan operation allows a P2P operation (search) to be re-started.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 17:32:31 +02:00
Jouni Malinen 565110cd55 nl80211: Include interface name in more debug prints
This makes it easier to understand how scan operations and events occur
when multiple interfaces is being controlled by a single wpa_supplicant
process.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-18 16:05:24 +02:00
Jouni Malinen 095da179de Android: Enable WNM in the build
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:19:44 +02:00
Jouni Malinen ce9283a401 Android: Use CONFIG_WNM mode consistently
Replace CONFIG_IEEE80211V with CONFIG_WNM to get more consistent build
options for WNM-Sleep Mode operations. This is similar to the Makefile
change in commit ad3872a372.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:13:46 +02:00
Jouni Malinen 69586aa312 Android: Fix CONFIG_WNM use in Android.mk
This code was within ifdef CONFIG_AP and did not get included unless
AP mode support was also enabled. This is similar to the Makefile
change in commit 2dfb9a447c.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:10:44 +02:00
Jouni Malinen 3b335329b9 Android: Update Android.mk based on Makefile changes
This brings the Android makefiles a bit closer to the Makefile changes
that had been missed in the past.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 20:08:23 +02:00
Jouni Malinen 47c34473f9 tests: Give document string for each test case as a description
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 11:19:24 +02:00
Jouni Malinen 1a4d80b8d5 tests: Group formation with PBC
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 11:10:59 +02:00
Jouni Malinen 5743006d36 tests: Add P2P device discovery and provision discovery test case
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-17 10:58:48 +02:00
Jouni Malinen c3aa4da94d Convert WPS NFC python scripts from using wpactrl to wpaspy
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 21:47:10 +02:00
Jouni Malinen 15cb4772d6 wpaspy: Fix exception handling in the test script
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 21:46:51 +02:00
Partha Narasimhan b2a12c4f93 wpa_supplicant: Fix lookup of cached PMKSA
This fixes the lookup of a usable PMKSA entry in the cache. Using
wpa_s->current_ssid often returns nothing when a usable PMKSA exists in
the cache since wpa_s->current_ssid does not necessarily point to the
correct network entry at this point in time (prior to association).

Signed-hostap: Partha Narasimhan <parthan@gmail.com>
2013-03-16 12:45:31 +02:00
Bruno Randolf 65d52fc103 Add capability flag for IBSS and add get_capability modes
Add a driver capability flag for drivers which support IBSS mode and set
it for nl80211 drivers which have set the NL80211_IFTYPE_ADHOC.

Add a new option "modes" to "get_capability" which will return "AP" and
"IBSS" if the corresponding capability flags are set.

The idea is that this can be used for UIs to find out if the driver
supports IBSS mode.

Signed-hostap: Bruno Randolf <br1@einfach.org>
2013-03-16 12:42:15 +02:00
Felix Fietkau ba873c1284 hostapd: Fix client reassociation after disconnect due to ACK failure
Clear WLAN_STA_ASSOC_REQ_OK, otherwise no Class 3 frame will be sent to
the disconnected STA in response to data frames.

Signed-hostap: Felix Fietkau <nbd@openwrt.org>
2013-03-16 12:35:49 +02:00
Jouni Malinen 21f01a8e3d Fix build with CONFIG_NO_CONFIG_BLOBS
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 12:20:21 +02:00
Solomon Peachy 7d37a357fa Fix build without CONFIG_CTRL_IFACE or CONFIG_NO_STDOUT_DEBUG
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
2013-03-16 12:07:18 +02:00
Jouni Malinen 526b3a12f1 libtommath: Avoid a compiler warning on unused variable
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 12:03:37 +02:00
Solomon Peachy de718493b4 libtommath: Condition fast_s_mp_mul_digs() on LTM_FAST
This function uses ~1.7kB of stack, and since there's a slower
alternative, wrap it with LTM_FAST.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
2013-03-16 12:01:03 +02:00
Jouni Malinen d963f03772 tests: Use social-only scan by default to speed up tests
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:47:01 +02:00
Jouni Malinen c4fff52c89 tests: Add GO Negotiation without pre-authorization
This is the most common sequence for initiating GO Negotiation, so
include a test case that uses threads to follow both peers at the
same time to allow GO Negotiation to be re-initiated.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:36:59 +02:00
Jouni Malinen 4d7d61b689 tests: Fix wait duration
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-16 11:21:22 +02:00
Jouni Malinen dbca75f82a P2P: Remove persistent group peer if it rejects invitation
If a peer replies to persistent group invitation with status code 8
(unknown group), remove the peer from the p2p_client_list if we are the
GO or remove the persistent group if we are the P2P client since it
looks like that the peer has dropped persistent group credentials and
the provisioning step needs to be executed again.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-15 16:43:06 +02:00
Jouni Malinen b277a2bebc P2P: Allow shared interface channel preference to be ignored
p2p_ignore_shared_freq=1 in the configuration file (or "SET
p2p_ignore_shared_freq 1" on control interface) can now be used to
configure wpa_supplicant to ignore the preference on shared operating
channel when the driver support multi-channel concurrency. The default
behavior is to try to start any new P2P group on an operating channel
that is already in use on another virtual interface to avoid extra cost
from hopping between multiple channels. If this new parameter is set to
1, such preference is not used and instead, the channel for the new P2P
group is selected based on other preferences while ignoring operating
channels of any concurrent connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:32:35 +02:00
Jouni Malinen 6cb27aa85f P2P: Fix shared frequency preference for concurrent operations
Commit 50285f5ca8 changed number of rules
in channel selection and among other things, it broke the design where
the currently used operating channel on a virtual interface that is
shared by the same radio is preferred to avoid costs related to
multi-channel concurrency. Fix this regression by making the P2P module
aware of the shared channel and using that preference as the highest
priority when re-selecting the channel during negotiation.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:26:55 +02:00
Jouni Malinen 62e10e6e3d P2P: Use best-overall channel in p2p_reselect_channel()
Commit 50285f5ca8 ended up forcing channel
re-selection in number of cases where the peer would actually have
accepted our initial preference. Fix the parts related to best channel
information by using best_freq_overall as the highest priority and by
skipping the band changes if the peer supports the channel that we
picked since these were based on the assumption that
p2p_reselect_channel() is called only if the peer could not accept our
initial choice which is not the case anymore.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 16:05:47 +02:00
Jouni Malinen a70a52c316 P2P: Allow all channels for multi-channel concurrency (no negotiation)
Commit 79879f4ae8 enabled all channels to
be used when negotiating channel with a driver that supports
multi-channel concurrency. Extend that to cover cases where the channel
is not being negotiated (e.g., p2p_group_add to start a GO).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 15:38:11 +02:00
Sunil Dutt 4561526f83 TDLS: Disable link to existing peer with lower address
If the previously started setup is terminated in case both peers
initiate TDLS link at more or less the same time, disable the old link
to allow the dummy station entry to be deleted from cfg80211 so that a
new entry can be added for the setup direction that will be allowed to
proceed.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-14 13:48:36 +02:00
Jouni Malinen b6714ca1bb Fix compiler warning when CONFIG_IEEE80211R is not included
Commit 6a1ce39599 moved the bssid
variable declaration to be outside CONFIG_IEEE80211R block and
triggered a compiler warning about unused variable.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 12:40:57 +02:00
Jouni Malinen 94d7acf3df WPS NFC: Fix build without CONFIG_WPS_ER
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-13 00:02:52 +02:00
Deepthi Gowri ee9a95c34e Android: Enable IEEE 802.11r in wpa_supplicant builds
Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:09:41 +02:00
Deepthi Gowri 6a1ce39599 FT: Add support for IEEE 802.11r with driver-based SME
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the
WLAN driver. Add NL80211_CMD_FT_EVENT to send FT event from the
WLAN driver. This will carry the target AP's MAC address along
with the relevant Information Elements. This event is used to
report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).

Signed-off-by: Deepthi Gowri <deepthi@codeaurora.org>
2013-03-12 20:08:53 +02:00
Jouni Malinen f46fc73a3f P2P: Add a peer entry based on Association Request frame
It is possible for a P2P client to connect to an operating group without
exchanging any Probe Request/Response frames that would allow the GO to
discover the peer. To make sure there is a P2P peer entry at the GO, try
to add the peer information based on P2P IE in (Re)Association Request
frame.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-12 13:04:33 +02:00
Vivek Natarajan c9c77083b3 P2P: Clear p2p_in_provisioning flag on group removal
Commit 77dfafd07d cancels group formation
timeout on group removal case but failed to reset the
p2p_in_provisioning flag. This can lead to repeated p2p_find failures if
the group gets removed before completion of the WPS provisioning step
(e.g., GO tears down the group). Fix this by clearing
p2p_pin_provisioning when cancelling group formation.

Signed-hostap: Vivek Natarajan <nataraja@qca.qualcomm.com>
2013-03-11 20:47:24 +02:00
Chet Lanctot 9210bea172 Android: Enable IEEE 802.11w support in the build
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:52:13 +02:00
Chet Lanctot 3ee9ade6cf Allow SME SA Query to be used by all drivers
The unprotected disconnection events were previously processed only for
drivers that used the wpa_supplicant SME implementation (separate
authentication and association commands). However, this can be useful
for drivers that use the connect API, so remove the limitation and allow
the same IEEE 802.11w SA Query mechanism to be used even without full
use of the wpa_supplicant SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-03-11 13:49:40 +02:00
Jouni Malinen 5139008b51 Android: Sync makefile changes for HT/VHT overrides
CONFIG_HT_OVERRIDES and CONFIG_VHT_OVERRIDES were already mentioned in
android.config, but Android.mk did not yet know about them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 18:05:40 +02:00
Johannes Berg e9ee8dc394 wpa_supplicant: Support VHT capability overrides
Add support for VHT capability overrides to allow testing connections
with a subset of the VHT capabilities that are actually supported by
the device. The only thing that isn't currently supported (by mac80211
and this code) is the RX/TX highest rate field.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 18:04:39 +02:00
Johannes Berg eae3a584f5 wpa_supplicant: Parse int values in different bases and reject invalid
Instead of using atoi(), use strtol() which allows checking if
the configuration values are valid integers and can understand
more than just decimal (also hexadecimal and octal). This not
only allows specifying some fields in hex (which can be useful)
but also rejecting invalid configurations, e.g.,
        disassoc_low_ack=27 * 2
which was previously read as just 27.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-03-10 17:55:24 +02:00
David Spinadel 725fc39e07 wpa_supplicant: Reschedule sched scan after network change
Stop sched scan, if running, after any disabling or removing of
a network, and request a new scan if needed.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:51:13 +02:00
Jouni Malinen 14f7907890 Remove unnecessary local variable
The ssid parameter (if NULL) can be used for the loop, too, to make the
code look a bit prettier.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 17:45:15 +02:00
David Spinadel dca1a51149 wpa_supplicant: Handle enabling of one or all networks equally
Move enabling a network to a separate function. Try to reconnect if not
associated to an AP. Abort scheduled scan in any case of a new scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:43:00 +02:00
David Spinadel 7ed52f678b wpa_supplicant: Save prev_sched_ssid only if needed
If the whole ssid list was scanned, don't save the prev scheduled ssid
since we are going to start from beginning. Thos avoids starting sched
scan from prev_sched_ssid after scanning the full list, in case of
adding a network to ssid during scheduled scan.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:32:03 +02:00
David Spinadel a09fc1ccf8 wpa_supplicant: Do not allow too short sched scan
In case that the ssid list is longer than max number of ssids,
ths scheduled scan aborted after timeout and rescheduled again
with shorter timeout and longer interval. In case that the timeout
is shorter than the interval, only one scan iteration will
be run. In this case, go back to the initial values.

Signed-hostap: David Spinadel <david.spinadel@intel.com>
2013-03-10 17:27:48 +02:00
Jouni Malinen 214a77b016 nl80211: Use helper function for phy_info_freqs()
This allows one level of indentation to be removed by using a helper
function to process each frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-03-10 16:44:23 +02:00