Commit graph

465 commits

Author SHA1 Message Date
Sunil Dutt
ba71cb821a nl80211: Introduce the interface for external authentication
This command/event interface can be used by host drivers that do not
define separate commands for authentication and association but rely on
wpa_supplicant for the authentication (SAE) processing.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2018-02-02 18:51:04 +02:00
vamsi krishna
d98038bb05 FILS: Driver configuration to disable/enable FILS features
The new disable_fils parameter can be used to disable FILS functionality
in the driver. This is currently removing the FILS Capability bit in
Extended Capabilities and providing a callback to the driver wrappers.
driver_nl80211.c implements this using a QCA vendor specific command for
now.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-12-15 20:52:17 +02:00
Vidyullatha Kanchanapally
3c67e977de nl80211: Add support to send updated connection parameters
After an initial connection certain connection parameters may be
updated. It may be necessary to send these parameters to drivers since
these will be used in driver-initiated roaming cases. This commit
defines the driver_ops call for this and implements the needed
functionality for the nl80211 driver interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-10-17 16:04:51 +03:00
Jouni Malinen
a0bf1b68c0 Remove all PeerKey functionality
This was originally added to allow the IEEE 802.11 protocol to be
tested, but there are no known fully functional implementations based on
this nor any known deployments of PeerKey functionality. Furthermore,
PeerKey design in the IEEE Std 802.11-2016 standard has already been
marked as obsolete for DLS and it is being considered for complete
removal in REVmd.

This implementation did not really work, so it could not have been used
in practice. For example, key configuration was using incorrect
algorithm values (WPA_CIPHER_* instead of WPA_ALG_*) which resulted in
mapping to an invalid WPA_ALG_* value for the actual driver operation.
As such, the derived key could not have been successfully set for the
link.

Since there are bugs in this implementation and there does not seem to
be any future for the PeerKey design with DLS (TDLS being the future for
DLS), the best approach is to simply delete all this code to simplify
the EAPOL-Key handling design and to get rid of any potential issues if
these code paths were accidentially reachable.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-10-16 02:03:47 +03:00
bhagavathi perumal s
3567641ebb Add TX/RX rate info and signal strength into STA output
These allow external programs to fetch the TX and RX rate information
and signal strength for a specific STA through the hostapd control
interface command "STA <addr>". The values of these attributes are
filled in the response of nl80211 command NL80211_CMD_GET_STATION.

Signed-off-by: bhagavathi perumal s <bperumal@qti.qualcomm.com>
2017-10-05 12:12:24 +03:00
Jouni Malinen
61a56c1480 Add group_mgmt network parameter for PMF cipher selection
The new wpa_supplicant network parameter group_mgmt can be used to
specify which group management ciphers (AES-128-CMAC, BIP-GMAC-128,
BIP-GMAC-256, BIP-CMAC-256) are allowed for the network. If not
specified, the current behavior is maintained (i.e., follow what the AP
advertises). The parameter can list multiple space separate ciphers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-26 17:40:02 +03:00
Jouni Malinen
359166ed24 Remove the completely unused FT parameters in driver association data
It looks like these parameters related to FT have never been used, so
remove them from causing confusion. The separate update_ft_ies()
callback is used to provide the FT elements.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-09-06 21:20:13 +03:00
Ashwini Patil
fb718f94d6 nl80211: Check if driver supports OCE specific features
Check if device supports OCE STA/STA-CFON/AP specific mandatory
features. This commit includes checking based on the QCA vendor
attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-14 21:13:22 +03:00
Vidyullatha Kanchanapally
fe3e0bac1f FILS: Advertize FILS capability based on driver capability
Add changes to control interface command get_capability to advertize
FILS capability, FILS AKMs suites, and FILS Authentication algorithms
based on the driver capabilities.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-07-07 13:39:05 +03:00
Ashwini Patil
b04854ceff nl80211/MBO: Set temporary disallowed BSSID list to driver
Set temporary disallowed BSSID list to the driver so that the driver
doesn't try to connect to any of the blacklisted BSSIDs during
driver-based roaming operation. This commit includes support only for
the nl80211 driver interface using a QCA vendor command for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-30 17:27:44 +03:00
Jouni Malinen
567da5bbd0 DPP: Add new AKM
This new AKM is used with DPP when using the signed Connector to derive
a PMK. Since the KCK, KEK, and MIC lengths are variable within a single
AKM, this needs number of additional changes to get the PMK length
delivered to places that need to figure out the lengths of the PTK
components.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-06-19 21:13:17 +03:00
Vasanthakumar Thiagarajan
aa56e36d66 driver: Make DFS domain information available to core
Current DFS domain information of the driver can be used in ap/dfs
to comply with DFS domain specific requirements like uniform spreading
for ETSI domain.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
2017-05-13 20:01:44 +03:00
Masashi Honma
31a856a127 mesh: Make NL80211_MESHCONF_RSSI_THRESHOLD configurable
In some practical cases, it is useful to suppress joining to node in the
distance. The new field mesh_rssi_threshold could be used as RSSI
threshold for joining.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2017-05-08 16:23:02 +03:00
Vamsi Krishna
178553b709 MBO: Add support to set ignore assoc disallow to driver
Add support to set ignore assoc disallow to the driver so that the
driver ignores assoc disallowed bit set by APs while connecting. This is
used by drivers that handle BSS selection and roaming internally.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-05-05 00:26:05 +03:00
Jeffin Mammen
f46c154c59 atheros: Add FILS AAD parameters in sta_auth() handler
This is needed to allow the driver SME to perform the needed AES-SIV
operations during FILS association.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-23 17:47:15 +03:00
Jeffin Mammen
6b128fb2af driver: Move sta_auth() arguments to a struct
This makes it easier to add more parameters without having to change the
callback function prototype.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-23 17:47:12 +03:00
Vidyullatha Kanchanapally
061a3d3d53 nl80211: Add support for FILS Cache Identifier in add/remove_pmkid()
This is needed for configuring PMKSA cache entries to the driver with
the FILS Cache Identifier and SSID.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:37 +03:00
Vidyullatha Kanchanapally
6fbb54140b driver: Move add_pmkid() and remove_pmkid() arguments into a struct
This makes it easier to add more arguments to these wpa_driver_ops
functions.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 17:03:35 +03:00
Vidyullatha Kanchanapally
ad295f3b85 nl80211: Add support for FILS shared key offload
Add support for FILS shared key offload for drivers which advertize
FILS shared key support using NL80211_CMD_CONNECT.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-04-07 16:21:55 +03:00
Jouni Malinen
f9561868ec OWE: Add driver capability flag for OWE AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2017-03-12 19:24:11 +02:00
Vasanthakumar Thiagarajan
62c8c7f721 nl80211: Handle pre-CAC expired event from the driver
Process the new nl80211 event NL80211_RADAR_PRE_CAC_EXPIRED to allow the
driver to notify expiry of the CAC result on a channel.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
2017-03-09 17:01:36 +02:00
Purushottam Kushwaha
d0330d57f3 nl80211: Add option to delay start of schedule scan plans
The userspace may want to delay the the first scheduled scan.
This enhances sched_scan to add initial delay (in seconds) before
starting first scan cycle. The driver may optionally choose to
ignore this parameter and start immediately (or at any other time).

This uses NL80211_ATTR_SCHED_SCAN_DELAY to add this via user
global configurable option: sched_scan_start_delay.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-09 15:44:26 +02:00
Kanchanapally, Vidyullatha
3ab484928a nl80211: Driver command for checking BTM accept/reject
Add driver interface command using the QCA vendor extensions to check
the driverr whether to accept or reject a BSS transition candidate. For
the reject case, report an MBO reject reason code.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-03-07 00:20:29 +02:00
Purushottam Kushwaha
3f23260da8 nl80211: Notify reason for connection timeout failure
This adds reason for timeout in event CTRL-EVENT-ASSOC-REJECT whenever
connection failure happens because of timeout. This extends the
"timeout" parameter in the event to include the reason, if available:
timeout=scan, timeout=auth, timeout=assoc.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-20 10:47:08 +02:00
Peng Xu
94380cb40a hostapd: Initial IEEE 802.11ax (HE) definitions
Add IEEE 802.11ax definitions for config, IEEE structures, and
constants. These are still subject to change in the IEEE process.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-19 17:37:52 +02:00
vamsi krishna
20c846d9ee nl80211: sched_scan relative RSSI parameters
Add driver interface support to set sched_scan relative RSSI parameters
and to indicate driver support for this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-10 19:48:12 +02:00
Vamsi Krishna
8331c9b316 nl80211: Add support for mgmt_tx with random TA
This adds support for specifying a random TA for management frame
transmission commands and driver capability flags for indicating whether
this is supported in not-connected and connected states.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2017-02-07 19:35:34 +02:00
Jouni Malinen
688556722c nl80211: More complete processing of connection quality monitor events
This adds processing of beacon loss events and generation of an internal
EVENT_BEACON_LOSS event based on them for wpa_supplicant processing. In
addition, number of consecutively lost (not acknowledged) packets is now
reported and TXE events are noted in the debug log.

Signed-off-by: Jouni Malinen <j@w1.fi>
2017-01-08 12:11:14 +02:00
Avraham Stern
c16b9f8d33 driver: Add scan support to beacon report
Add the following parameters to scan request:
 1. Dwell time on each channel.
 2. Whether the specified dwell time is mandatory.

In addition, add to scan results info the time that the scan actually
started, and to each scan result the time the beacon/probe was received,
both in terms of TSF of the BSS that the interface that requested the
scan is connected to (if available).

Add flags to indicate whether the driver supports dwell time
configuration and scan information reporting.

This scan configuration and information is required to support beacon
report radio measurement.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-01-03 15:18:29 +02:00
Michael Braun
34f7c699a6 Add multicast to unicast support
This adds support for nl80211 NL80211_CMD_SET_MULTICAST_TO_UNICAST
command.

By setting the new hostapd configuration option multicast_to_unicast=1,
hostapd configures this AP to perform multicast to unicast conversion.

When enabled, all multicast packets with ethertype ARP, IPv4, or IPv6
(possibly within an 802.1Q header) will be sent out to each station once
with the destination (multicast) MAC address replaced by the station's
MAC address. Note that this may break certain expectations of the
receiver, e.g., the ability to drop unicast IP packets encapsulated in
multicast L2 frames, or the ability to not send destination unreachable
messages in such cases.

This also does not implement Directed Multicast Service (DMS).

Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
2016-12-04 21:00:06 +02:00
Sabrina Dubroca
f014d9dbf0 macsec_linux: Add a driver for macsec on Linux kernels
This uses libnl3 to communicate with the macsec module available on
Linux. A recent enough version of libnl is needed for the macsec.h file
(which is not yet available in a formal libnl release at the time of
this commit).

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-30 20:08:36 +02:00
Sunil Dutt
eeb34a432e nl80211: Enhance abort scan to also abort the vendor scan
This commit enhances the abort scan implementation to also abort the
vendor scan, if one was used to trigger the scan.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-30 19:33:39 +02:00
Purushottam Kushwaha
29483a5678 Add support for user configurable Beacon frame data rate for AP mode
Allow configuration of Beacon frame TX rate from hostapd.conf with
"beacon_rate=xx" option. The following format is used to set
legacy/HT/VHT beacon rates:

Legacy (CCK/OFDM rates):
	beacon_rate=<legacy rate in 100 kbps>
HT:
	beacon_rate=ht:<HT MCS>
VHT:
	beacon_rate=vht:<VHT MCS>

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-11-25 23:12:30 +02:00
Sabrina Dubroca
1d3d0666a6 mka: Add enable_encrypt op and call it from CP state machine
This allows MKA to turn encryption on/off down to the driver.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-11-20 00:35:23 +02:00
Sabrina Dubroca
23c3528a84 mka: Add support for removing SAs
So that the core can notify drivers that need to perform some operations
when an SA is deleted.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:35:38 +03:00
Sabrina Dubroca
6f551abdfc mka: Remove "channel" hacks from the stack and the macsec_qca driver
This is specific to the macsec_qca driver. The core implementation
shouldn't care about this, and only deal with the complete secure
channel, and pass this down to the driver.

Drivers that have such limitations should take care of these in their
->create functions and throw an error.

Since the core MKA no longer saves the channel number, the macsec_qca
driver must be able to recover it. Add a map (which is just an array
since it's quite short) to match SCIs to channel numbers, and lookup
functions that will be called in every place where functions would get
the channel from the core code. Getting an available channel should be
part of channel creation, instead of being a preparation step.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-29 11:24:08 +03:00
Maneesh Jain
641c73f84f driver.h: Fix a typo in a comment
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
2016-10-28 19:01:50 +03:00
Sunil Dutt
2e4e4fb71c nl80211: Allow TDLS trigger modes to be configured to the host driver
This commit adds a control interface command to configure the TDLS
trigger mode to the host driver. This TDLS mode is configured through
the "SET tdls_trigger_control" control interface command.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-27 23:22:33 +03:00
Jouni Malinen
061dac1d3c FILS: Claim FILS capability only if driver supports it
"GET_CAPABILITY fils" used to return "FILS" based on wpa_supplicant
configuration. This can be made more useful by checking both for
wpa_supplicant and driver support for FILS.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-26 00:41:04 +03:00
Jouni Malinen
ac56c39532 driver: Add option to pass FILS KEK/AAD to the driver for association
This allows the FILS KEK and AAD data (nonces) to be configured to the
driver for association so that the driver can encrypt the
(Re)Association Request frame and decrypt the (Re)Association Response
frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-24 23:07:56 +03:00
Jouni Malinen
5b092fb63f nl80211: Make full (Re)Association Response frame available
This is needed for FILS processing since AAD includes data before the
first element.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 18:12:11 +03:00
Jouni Malinen
ce16c489d8 Rename sae_data to more generic auth_data
This makes it cleaner for the FILS implementation to use the same design
for setting Authentication frame elements as was already done with SAE.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-10-22 17:51:43 +03:00
Sabrina Dubroca
a25e4efc9e mka: Add driver op to get macsec capabilities
This also implements the macsec_get_capability for the macsec_qca
driver to maintain the existing behavior.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-09 11:30:48 +03:00
Sabrina Dubroca
5f5ca28414 mka: Pass full structures down to macsec drivers' receive SC ops
Clean up the driver interface by passing pointers to struct receive_sc
down the stack to the {create,delete}_recevie_sc() ops, instead of
passing the individual properties of the SC.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-08 00:45:19 +03:00
Sabrina Dubroca
8ebfc7c2ba mka: Pass full structures down to macsec drivers' transmit SC ops
Clean up the driver interface by passing pointers to struct transmit_sc
down the stack to the {create,delete}_transmit_sc() ops, instead of
passing the individual arguments.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-08 00:45:03 +03:00
Sabrina Dubroca
cecdecdbe8 mka: Pass full structures down to macsec drivers' receive SA ops
Clean up the driver interface by passing pointers to struct receive_sa
down the stack to the {create,enable,disable}_receive_sa() ops, instead
of passing the individual properties of the SA.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-03 13:26:26 +03:00
Sabrina Dubroca
909c1b9835 mka: Pass full structures down to macsec drivers' transmit SA ops
Clean up the driver interface by passing pointers to struct transmit_sa
down the stack to the {create,enable,disable}_transmit_sa ops, instead
of passing the individual properties of the SA.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-03 13:17:21 +03:00
Sabrina Dubroca
7fa5eff8ab mka: Pass full structures down to macsec drivers' packet number ops
Clean up the driver interface by passing pointers to structs transmit_sa
and receive_sa down the stack to get_receive_lowest_pn(),
get_transmit_next_pn(), and set_transmit_next_pn() ops, instead of
passing the individual arguments.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-03 12:54:08 +03:00
Sabrina Dubroca
f75f6e2b03 mka: Move structs {transmit,receive}_{sa,sc} to a common header
These structs will be passed down to macsec drivers in a coming patch to
make the driver interface cleaner, so they need to be shared between the
core MKA implementation and the drivers.

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-10-03 12:50:07 +03:00
Sabrina Dubroca
07a6bfe1d2 mka: Store cipher suite ID in a u64 instead of u8 pointer
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
2016-08-28 21:55:54 +03:00