jeltz/hostap
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
hostap/src/drivers/driver.h
Avraham Stern c16b9f8d33 driver: Add scan support to beacon report 
Add the following parameters to scan request:
 1. Dwell time on each channel.
 2. Whether the specified dwell time is mandatory.

In addition, add to scan results info the time that the scan actually
started, and to each scan result the time the beacon/probe was received,
both in terms of TSF of the BSS that the interface that requested the
scan is connected to (if available).

Add flags to indicate whether the driver supports dwell time
configuration and scan information reporting.

This scan configuration and information is required to support beacon
report radio measurement.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
2017-01-03 15:18:29 +02:00

5125 lines
155 KiB
C
Raw Blame History

/*
* Driver interface definition
* Copyright (c) 2003-2015, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*
* This file defines a driver interface used by both %wpa_supplicant and
* hostapd. The first part of the file defines data structures used in various
* driver operations. This is followed by the struct wpa_driver_ops that each
* driver wrapper will beed to define with callback functions for requesting
* driver operations. After this, there are definitions for driver event
* reporting with wpa_supplicant_event() and some convenience helper functions
* that can be used to report events.
*/
#ifndef DRIVER_H
#define DRIVER_H
#define WPA_SUPPLICANT_DRIVER_VERSION 4
#include "common/defs.h"
#include "common/ieee802_11_defs.h"
#ifdef CONFIG_MACSEC
#include "pae/ieee802_1x_kay.h"
#endif /* CONFIG_MACSEC */
#include "utils/list.h"
#define HOSTAPD_CHAN_DISABLED 0x00000001
#define HOSTAPD_CHAN_NO_IR 0x00000002
#define HOSTAPD_CHAN_RADAR 0x00000008
#define HOSTAPD_CHAN_HT40PLUS 0x00000010
#define HOSTAPD_CHAN_HT40MINUS 0x00000020
#define HOSTAPD_CHAN_HT40 0x00000040
#define HOSTAPD_CHAN_SURVEY_LIST_INITIALIZED 0x00000080
#define HOSTAPD_CHAN_DFS_UNKNOWN 0x00000000
#define HOSTAPD_CHAN_DFS_USABLE 0x00000100
#define HOSTAPD_CHAN_DFS_UNAVAILABLE 0x00000200
#define HOSTAPD_CHAN_DFS_AVAILABLE 0x00000300
#define HOSTAPD_CHAN_DFS_MASK 0x00000300
#define HOSTAPD_CHAN_VHT_10_70 0x00000800
#define HOSTAPD_CHAN_VHT_30_50 0x00001000
#define HOSTAPD_CHAN_VHT_50_30 0x00002000
#define HOSTAPD_CHAN_VHT_70_10 0x00004000
#define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000
#define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000
#define HOSTAPD_CHAN_VHT_10_150 0x00100000
#define HOSTAPD_CHAN_VHT_30_130 0x00200000
#define HOSTAPD_CHAN_VHT_50_110 0x00400000
#define HOSTAPD_CHAN_VHT_70_90 0x00800000
#define HOSTAPD_CHAN_VHT_90_70 0x01000000
#define HOSTAPD_CHAN_VHT_110_50 0x02000000
#define HOSTAPD_CHAN_VHT_130_30 0x04000000
#define HOSTAPD_CHAN_VHT_150_10 0x08000000
/* Filter gratuitous ARP */
#define WPA_DATA_FRAME_FILTER_FLAG_ARP BIT(0)
/* Filter unsolicited Neighbor Advertisement */
#define WPA_DATA_FRAME_FILTER_FLAG_NA BIT(1)
/* Filter unicast IP packets encrypted using the GTK */
#define WPA_DATA_FRAME_FILTER_FLAG_GTK BIT(2)
/**
* enum reg_change_initiator - Regulatory change initiator
*/
enum reg_change_initiator {
REGDOM_SET_BY_CORE,
REGDOM_SET_BY_USER,
REGDOM_SET_BY_DRIVER,
REGDOM_SET_BY_COUNTRY_IE,
REGDOM_BEACON_HINT,
};
/**
* enum reg_type - Regulatory change types
*/
enum reg_type {
REGDOM_TYPE_UNKNOWN,
REGDOM_TYPE_COUNTRY,
REGDOM_TYPE_WORLD,
REGDOM_TYPE_CUSTOM_WORLD,
REGDOM_TYPE_INTERSECTION,
};
/**
* struct hostapd_channel_data - Channel information
*/
struct hostapd_channel_data {
/**
* chan - Channel number (IEEE 802.11)
*/
short chan;
/**
* freq - Frequency in MHz
*/
int freq;
/**
* flag - Channel flags (HOSTAPD_CHAN_*)
*/
int flag;
/**
* max_tx_power - Regulatory transmit power limit in dBm
*/
u8 max_tx_power;
/**
* survey_list - Linked list of surveys (struct freq_survey)
*/
struct dl_list survey_list;
/**
* min_nf - Minimum observed noise floor, in dBm, based on all
* surveyed channel data
*/
s8 min_nf;
#ifdef CONFIG_ACS
/**
* interference_factor - Computed interference factor on this
* channel (used internally in src/ap/acs.c; driver wrappers do not
* need to set this)
*/
long double interference_factor;
#endif /* CONFIG_ACS */
/**
* dfs_cac_ms - DFS CAC time in milliseconds
*/
unsigned int dfs_cac_ms;
};
#define HOSTAPD_MODE_FLAG_HT_INFO_KNOWN BIT(0)
#define HOSTAPD_MODE_FLAG_VHT_INFO_KNOWN BIT(1)
/**
* struct hostapd_hw_modes - Supported hardware mode information
*/
struct hostapd_hw_modes {
/**
* mode - Hardware mode
*/
enum hostapd_hw_mode mode;
/**
* num_channels - Number of entries in the channels array
*/
int num_channels;
/**
* channels - Array of supported channels
*/
struct hostapd_channel_data *channels;
/**
* num_rates - Number of entries in the rates array
*/
int num_rates;
/**
* rates - Array of supported rates in 100 kbps units
*/
int *rates;
/**
* ht_capab - HT (IEEE 802.11n) capabilities
*/
u16 ht_capab;
/**
* mcs_set - MCS (IEEE 802.11n) rate parameters
*/
u8 mcs_set[16];
/**
* a_mpdu_params - A-MPDU (IEEE 802.11n) parameters
*/
u8 a_mpdu_params;
/**
* vht_capab - VHT (IEEE 802.11ac) capabilities
*/
u32 vht_capab;
/**
* vht_mcs_set - VHT MCS (IEEE 802.11ac) rate parameters
*/
u8 vht_mcs_set[8];
unsigned int flags; /* HOSTAPD_MODE_FLAG_* */
};
#define IEEE80211_MODE_INFRA 0
#define IEEE80211_MODE_IBSS 1
#define IEEE80211_MODE_AP 2
#define IEEE80211_MODE_MESH 5
#define IEEE80211_CAP_ESS 0x0001
#define IEEE80211_CAP_IBSS 0x0002
#define IEEE80211_CAP_PRIVACY 0x0010
#define IEEE80211_CAP_RRM 0x1000
/* DMG (60 GHz) IEEE 802.11ad */
/* type - bits 0..1 */
#define IEEE80211_CAP_DMG_MASK 0x0003
#define IEEE80211_CAP_DMG_IBSS 0x0001 /* Tx by: STA */
#define IEEE80211_CAP_DMG_PBSS 0x0002 /* Tx by: PCP */
#define IEEE80211_CAP_DMG_AP 0x0003 /* Tx by: AP */
#define WPA_SCAN_QUAL_INVALID BIT(0)
#define WPA_SCAN_NOISE_INVALID BIT(1)
#define WPA_SCAN_LEVEL_INVALID BIT(2)
#define WPA_SCAN_LEVEL_DBM BIT(3)
#define WPA_SCAN_ASSOCIATED BIT(5)
/**
* struct wpa_scan_res - Scan result for an BSS/IBSS
* @flags: information flags about the BSS/IBSS (WPA_SCAN_*)
* @bssid: BSSID
* @freq: frequency of the channel in MHz (e.g., 2412 = channel 1)
* @beacon_int: beacon interval in TUs (host byte order)
* @caps: capability information field in host byte order
* @qual: signal quality
* @noise: noise level
* @level: signal level
* @tsf: Timestamp
* @age: Age of the information in milliseconds (i.e., how many milliseconds
* ago the last Beacon or Probe Response frame was received)
* @est_throughput: Estimated throughput in kbps (this is calculated during
* scan result processing if left zero by the driver wrapper)
* @snr: Signal-to-noise ratio in dB (calculated during scan result processing)
* @parent_tsf: Time when the Beacon/Probe Response frame was received in terms
* of TSF of the BSS specified by %tsf_bssid.
* @tsf_bssid: The BSS that %parent_tsf TSF time refers to.
* @ie_len: length of the following IE field in octets
* @beacon_ie_len: length of the following Beacon IE field in octets
*
* This structure is used as a generic format for scan results from the
* driver. Each driver interface implementation is responsible for converting
* the driver or OS specific scan results into this format.
*
* If the driver does not support reporting all IEs, the IE data structure is
* constructed of the IEs that are available. This field will also need to
* include SSID in IE format. All drivers are encouraged to be extended to
* report all IEs to make it easier to support future additions.
*
* This structure data is followed by ie_len octets of IEs from Probe Response
* frame (or if the driver does not indicate source of IEs, these may also be
* from Beacon frame). After the first set of IEs, another set of IEs may follow
* (with beacon_ie_len octets of data) if the driver provides both IE sets.
*/
struct wpa_scan_res {
unsigned int flags;
u8 bssid[ETH_ALEN];
int freq;
u16 beacon_int;
u16 caps;
int qual;
int noise;
int level;
u64 tsf;
unsigned int age;
unsigned int est_throughput;
int snr;
u64 parent_tsf;
u8 tsf_bssid[ETH_ALEN];
size_t ie_len;
size_t beacon_ie_len;
/* Followed by ie_len + beacon_ie_len octets of IE data */
};
/**
* struct wpa_scan_results - Scan results
* @res: Array of pointers to allocated variable length scan result entries
* @num: Number of entries in the scan result array
* @fetch_time: Time when the results were fetched from the driver
*/
struct wpa_scan_results {
struct wpa_scan_res **res;
size_t num;
struct os_reltime fetch_time;
};
/**
* struct wpa_interface_info - Network interface information
* @next: Pointer to the next interface or NULL if this is the last one
* @ifname: Interface name that can be used with init() or init2()
* @desc: Human readable adapter description (e.g., vendor/model) or NULL if
* not available
* @drv_name: struct wpa_driver_ops::name (note: unlike other strings, this one
* is not an allocated copy, i.e., get_interfaces() caller will not free
* this)
*/
struct wpa_interface_info {
struct wpa_interface_info *next;
char *ifname;
char *desc;
const char *drv_name;
};
#define WPAS_MAX_SCAN_SSIDS 16
/**
* struct wpa_driver_scan_ssid - SSIDs to scan for
* @ssid - specific SSID to scan for (ProbeReq)
* %NULL or zero-length SSID is used to indicate active scan
* with wildcard SSID.
* @ssid_len - Length of the SSID in octets
*/
struct wpa_driver_scan_ssid {
const u8 *ssid;
size_t ssid_len;
};
/**
* struct wpa_driver_scan_params - Scan parameters
* Data for struct wpa_driver_ops::scan2().
*/
struct wpa_driver_scan_params {
/**
* ssids - SSIDs to scan for
*/
struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS];
/**
* num_ssids - Number of entries in ssids array
* Zero indicates a request for a passive scan.
*/
size_t num_ssids;
/**
* extra_ies - Extra IE(s) to add into Probe Request or %NULL
*/
const u8 *extra_ies;
/**
* extra_ies_len - Length of extra_ies in octets
*/
size_t extra_ies_len;
/**
* freqs - Array of frequencies to scan or %NULL for all frequencies
*
* The frequency is set in MHz. The array is zero-terminated.
*/
int *freqs;
/**
* filter_ssids - Filter for reporting SSIDs
*
* This optional parameter can be used to request the driver wrapper to
* filter scan results to include only the specified SSIDs. %NULL
* indicates that no filtering is to be done. This can be used to
* reduce memory needs for scan results in environments that have large
* number of APs with different SSIDs.
*
* The driver wrapper is allowed to take this allocated buffer into its
* own use by setting the pointer to %NULL. In that case, the driver
* wrapper is responsible for freeing the buffer with os_free() once it
* is not needed anymore.
*/
struct wpa_driver_scan_filter {
u8 ssid[SSID_MAX_LEN];
size_t ssid_len;
} *filter_ssids;
/**
* num_filter_ssids - Number of entries in filter_ssids array
*/
size_t num_filter_ssids;
/**
* filter_rssi - Filter by RSSI
*
* The driver may filter scan results in firmware to reduce host
* wakeups and thereby save power. Specify the RSSI threshold in s32
* dBm.
*/
s32 filter_rssi;
/**
* p2p_probe - Used to disable CCK (802.11b) rates for P2P probes
*
* When set, the driver is expected to remove rates 1, 2, 5.5, and 11
* Mbps from the support rates element(s) in the Probe Request frames
* and not to transmit the frames at any of those rates.
*/
unsigned int p2p_probe:1;
/**
* only_new_results - Request driver to report only new results
*
* This is used to request the driver to report only BSSes that have
* been detected after this scan request has been started, i.e., to
* flush old cached BSS entries.
*/
unsigned int only_new_results:1;
/**
* low_priority - Requests driver to use a lower scan priority
*
* This is used to request the driver to use a lower scan priority
* if it supports such a thing.
*/
unsigned int low_priority:1;
/**
* mac_addr_rand - Requests driver to randomize MAC address
*/
unsigned int mac_addr_rand:1;
/**
* mac_addr - MAC address used with randomization. The address cannot be
* a multicast one, i.e., bit 0 of byte 0 should not be set.
*/
const u8 *mac_addr;
/**
* mac_addr_mask - MAC address mask used with randomization.
*
* Bits that are 0 in the mask should be randomized. Bits that are 1 in
* the mask should be taken as is from mac_addr. The mask should not
* allow the generation of a multicast address, i.e., bit 0 of byte 0
* must be set.
*/
const u8 *mac_addr_mask;
/**
* sched_scan_plans - Scan plans for scheduled scan
*
* Each scan plan consists of the number of iterations to scan and the
* interval between scans. When a scan plan finishes (i.e., it was run
* for the specified number of iterations), the next scan plan is
* executed. The scan plans are executed in the order they appear in
* the array (lower index first). The last scan plan will run infinitely
* (until requested to stop), thus must not specify the number of
* iterations. All other scan plans must specify the number of
* iterations.
*/
struct sched_scan_plan {
u32 interval; /* In seconds */
u32 iterations; /* Zero to run infinitely */
} *sched_scan_plans;
/**
* sched_scan_plans_num - Number of scan plans in sched_scan_plans array
*/
unsigned int sched_scan_plans_num;
/**
* bssid - Specific BSSID to scan for
*
* This optional parameter can be used to replace the default wildcard
* BSSID with a specific BSSID to scan for if results are needed from
* only a single BSS.
*/
const u8 *bssid;
/**
* scan_cookie - Unique identification representing the scan request
*
* This scan_cookie carries a unique identification representing the
* scan request if the host driver/kernel supports concurrent scan
* requests. This cookie is returned from the corresponding driver
* interface.
*
* Note: Unlike other parameters in this structure, scan_cookie is used
* only to return information instead of setting parameters for the
* scan.
*/
u64 scan_cookie;
/**
* duration - Dwell time on each channel
*
* This optional parameter can be used to set the dwell time on each
* channel. In TUs.
*/
u16 duration;
/**
* duration_mandatory - Whether the specified duration is mandatory
*
* If this is set, the duration specified by the %duration field is
* mandatory (and the driver should reject the scan request if it is
* unable to comply with the specified duration), otherwise it is the
* maximum duration and the actual duration may be shorter.
*/
unsigned int duration_mandatory:1;
/*
* NOTE: Whenever adding new parameters here, please make sure
* wpa_scan_clone_params() and wpa_scan_free_params() get updated with
* matching changes.
*/
};
/**
* struct wpa_driver_auth_params - Authentication parameters
* Data for struct wpa_driver_ops::authenticate().
*/
struct wpa_driver_auth_params {
int freq;
const u8 *bssid;
const u8 *ssid;
size_t ssid_len;
int auth_alg;
const u8 *ie;
size_t ie_len;
const u8 *wep_key[4];
size_t wep_key_len[4];
int wep_tx_keyidx;
int local_state_change;
/**
* p2p - Whether this connection is a P2P group
*/
int p2p;
/**
* auth_data - Additional elements for Authentication frame
*
* This buffer starts with the Authentication transaction sequence
* number field. If no special handling of such elements is needed, this
* pointer is %NULL. This is used with SAE and FILS.
*/
const u8 *auth_data;
/**
* auth_data_len - Length of auth_data buffer in octets
*/
size_t auth_data_len;
};
/**
* enum wps_mode - WPS mode
*/
enum wps_mode {
/**
* WPS_MODE_NONE - No WPS provisioning being used
*/
WPS_MODE_NONE,
/**
* WPS_MODE_OPEN - WPS provisioning with AP that is in open mode
*/
WPS_MODE_OPEN,
/**
* WPS_MODE_PRIVACY - WPS provisioning with AP that is using protection
*/
WPS_MODE_PRIVACY
};
/**
* struct hostapd_freq_params - Channel parameters
*/
struct hostapd_freq_params {
/**
* mode - Mode/band (HOSTAPD_MODE_IEEE80211A, ..)
*/
enum hostapd_hw_mode mode;
/**
* freq - Primary channel center frequency in MHz
*/
int freq;
/**
* channel - Channel number
*/
int channel;
/**
* ht_enabled - Whether HT is enabled
*/
int ht_enabled;
/**
* sec_channel_offset - Secondary channel offset for HT40
*
* 0 = HT40 disabled,
* -1 = HT40 enabled, secondary channel below primary,
* 1 = HT40 enabled, secondary channel above primary
*/
int sec_channel_offset;
/**
* vht_enabled - Whether VHT is enabled
*/
int vht_enabled;
/**
* center_freq1 - Segment 0 center frequency in MHz
*
* Valid for both HT and VHT.
*/
int center_freq1;
/**
* center_freq2 - Segment 1 center frequency in MHz
*
* Non-zero only for bandwidth 80 and an 80+80 channel
*/
int center_freq2;
/**
* bandwidth - Channel bandwidth in MHz (20, 40, 80, 160)
*/
int bandwidth;
};
/**
* struct wpa_driver_associate_params - Association parameters
* Data for struct wpa_driver_ops::associate().
*/
struct wpa_driver_associate_params {
/**
* bssid - BSSID of the selected AP
* This can be %NULL, if ap_scan=2 mode is used and the driver is
* responsible for selecting with which BSS to associate. */
const u8 *bssid;
/**
* bssid_hint - BSSID of a proposed AP
*
* This indicates which BSS has been found a suitable candidate for
* initial association for drivers that use driver/firmwate-based BSS
* selection. Unlike the @bssid parameter, @bssid_hint does not limit
* the driver from selecting other BSSes in the ESS.
*/
const u8 *bssid_hint;
/**
* ssid - The selected SSID
*/
const u8 *ssid;
/**
* ssid_len - Length of the SSID (1..32)
*/
size_t ssid_len;
/**
* freq - channel parameters
*/
struct hostapd_freq_params freq;
/**
* freq_hint - Frequency of the channel the proposed AP is using
*
* This provides a channel on which a suitable BSS has been found as a
* hint for the driver. Unlike the @freq parameter, @freq_hint does not
* limit the driver from selecting other channels for
* driver/firmware-based BSS selection.
*/
int freq_hint;
/**
* bg_scan_period - Background scan period in seconds, 0 to disable
* background scan, or -1 to indicate no change to default driver
* configuration
*/
int bg_scan_period;
/**
* beacon_int - Beacon interval for IBSS or 0 to use driver default
*/
int beacon_int;
/**
* wpa_ie - WPA information element for (Re)Association Request
* WPA information element to be included in (Re)Association
* Request (including information element id and length). Use
* of this WPA IE is optional. If the driver generates the WPA
* IE, it can use pairwise_suite, group_suite, and
* key_mgmt_suite to select proper algorithms. In this case,
* the driver has to notify wpa_supplicant about the used WPA
* IE by generating an event that the interface code will
* convert into EVENT_ASSOCINFO data (see below).
*
* When using WPA2/IEEE 802.11i, wpa_ie is used for RSN IE
* instead. The driver can determine which version is used by
* looking at the first byte of the IE (0xdd for WPA, 0x30 for
* WPA2/RSN).
*
* When using WPS, wpa_ie is used for WPS IE instead of WPA/RSN IE.
*/
const u8 *wpa_ie;
/**
* wpa_ie_len - length of the wpa_ie
*/
size_t wpa_ie_len;
/**
* wpa_proto - Bitfield of WPA_PROTO_* values to indicate WPA/WPA2
*/
unsigned int wpa_proto;
/**
* pairwise_suite - Selected pairwise cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int pairwise_suite;
/**
* group_suite - Selected group cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int group_suite;
/**
* key_mgmt_suite - Selected key management suite (WPA_KEY_MGMT_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int key_mgmt_suite;
/**
* auth_alg - Allowed authentication algorithms
* Bit field of WPA_AUTH_ALG_*
*/
int auth_alg;
/**
* mode - Operation mode (infra/ibss) IEEE80211_MODE_*
*/
int mode;
/**
* wep_key - WEP keys for static WEP configuration
*/
const u8 *wep_key[4];
/**
* wep_key_len - WEP key length for static WEP configuration
*/
size_t wep_key_len[4];
/**
* wep_tx_keyidx - WEP TX key index for static WEP configuration
*/
int wep_tx_keyidx;
/**
* mgmt_frame_protection - IEEE 802.11w management frame protection
*/
enum mfp_options mgmt_frame_protection;
/**
* ft_ies - IEEE 802.11r / FT information elements
* If the supplicant is using IEEE 802.11r (FT) and has the needed keys
* for fast transition, this parameter is set to include the IEs that
* are to be sent in the next FT Authentication Request message.
* update_ft_ies() handler is called to update the IEs for further
* FT messages in the sequence.
*
* The driver should use these IEs only if the target AP is advertising
* the same mobility domain as the one included in the MDIE here.
*
* In ap_scan=2 mode, the driver can use these IEs when moving to a new
* AP after the initial association. These IEs can only be used if the
* target AP is advertising support for FT and is using the same MDIE
* and SSID as the current AP.
*
* The driver is responsible for reporting the FT IEs received from the
* AP's response using wpa_supplicant_event() with EVENT_FT_RESPONSE
* type. update_ft_ies() handler will then be called with the FT IEs to
* include in the next frame in the authentication sequence.
*/
const u8 *ft_ies;
/**
* ft_ies_len - Length of ft_ies in bytes
*/
size_t ft_ies_len;
/**
* ft_md - FT Mobility domain (6 octets) (also included inside ft_ies)
*
* This value is provided to allow the driver interface easier access
* to the current mobility domain. This value is set to %NULL if no
* mobility domain is currently active.
*/
const u8 *ft_md;
/**
* passphrase - RSN passphrase for PSK
*
* This value is made available only for WPA/WPA2-Personal (PSK) and
* only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is
* the 8..63 character ASCII passphrase, if available. Please note that
* this can be %NULL if passphrase was not used to generate the PSK. In
* that case, the psk field must be used to fetch the PSK.
*/
const char *passphrase;
/**
* psk - RSN PSK (alternative for passphrase for PSK)
*
* This value is made available only for WPA/WPA2-Personal (PSK) and
* only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is
* the 32-octet (256-bit) PSK, if available. The driver wrapper should
* be prepared to handle %NULL value as an error.
*/
const u8 *psk;
/**
* drop_unencrypted - Enable/disable unencrypted frame filtering
*
* Configure the driver to drop all non-EAPOL frames (both receive and
* transmit paths). Unencrypted EAPOL frames (ethertype 0x888e) must
* still be allowed for key negotiation.
*/
int drop_unencrypted;
/**
* prev_bssid - Previously used BSSID in this ESS
*
* When not %NULL, this is a request to use reassociation instead of
* association.
*/
const u8 *prev_bssid;
/**
* wps - WPS mode
*
* If the driver needs to do special configuration for WPS association,
* this variable provides more information on what type of association
* is being requested. Most drivers should not need ot use this.
*/
enum wps_mode wps;
/**
* p2p - Whether this connection is a P2P group
*/
int p2p;
/**
* uapsd - UAPSD parameters for the network
* -1 = do not change defaults
* AP mode: 1 = enabled, 0 = disabled
* STA mode: bits 0..3 UAPSD enabled for VO,VI,BK,BE
*/
int uapsd;
/**
* fixed_bssid - Whether to force this BSSID in IBSS mode
* 1 = Fix this BSSID and prevent merges.
* 0 = Do not fix BSSID.
*/
int fixed_bssid;
/**
* fixed_freq - Fix control channel in IBSS mode
* 0 = don't fix control channel (default)
* 1 = fix control channel; this prevents IBSS merging with another
* channel
*/
int fixed_freq;
/**
* disable_ht - Disable HT (IEEE 802.11n) for this connection
*/
int disable_ht;
/**
* htcaps - HT Capabilities over-rides
*
* Only bits set in the mask will be used, and not all values are used
* by the kernel anyway. Currently, MCS, MPDU and MSDU fields are used.
*
* Pointer to struct ieee80211_ht_capabilities.
*/
const u8 *htcaps;
/**
* htcaps_mask - HT Capabilities over-rides mask
*
* Pointer to struct ieee80211_ht_capabilities.
*/
const u8 *htcaps_mask;
#ifdef CONFIG_VHT_OVERRIDES
/**
* disable_vht - Disable VHT for this connection
*/
int disable_vht;
/**
* VHT capability overrides.
*/
const struct ieee80211_vht_capabilities *vhtcaps;
const struct ieee80211_vht_capabilities *vhtcaps_mask;
#endif /* CONFIG_VHT_OVERRIDES */
/**
* req_key_mgmt_offload - Request key management offload for connection
*
* Request key management offload for this connection if the device
* supports it.
*/
int req_key_mgmt_offload;
/**
* Flag for indicating whether this association includes support for
* RRM (Radio Resource Measurements)
*/
int rrm_used;
/**
* pbss - If set, connect to a PCP in a PBSS. Otherwise, connect to an
* AP as usual. Valid for DMG network only.
*/
int pbss;
/**
* fils_kek - KEK for FILS association frame protection (AES-SIV)
*/
const u8 *fils_kek;
/**
* fils_kek_len: Length of fils_kek in bytes
*/
size_t fils_kek_len;
/**
* fils_nonces - Nonces for FILS association frame protection
* (AES-SIV AAD)
*/
const u8 *fils_nonces;
/**
* fils_nonces_len: Length of fils_nonce in bytes
*/
size_t fils_nonces_len;
};
enum hide_ssid {
NO_SSID_HIDING,
HIDDEN_SSID_ZERO_LEN,
HIDDEN_SSID_ZERO_CONTENTS
};
struct wowlan_triggers {
u8 any;
u8 disconnect;
u8 magic_pkt;
u8 gtk_rekey_failure;
u8 eap_identity_req;
u8 four_way_handshake;
u8 rfkill_release;
};
struct wpa_driver_ap_params {
/**
* head - Beacon head from IEEE 802.11 header to IEs before TIM IE
*/
u8 *head;
/**
* head_len - Length of the head buffer in octets
*/
size_t head_len;
/**
* tail - Beacon tail following TIM IE
*/
u8 *tail;
/**
* tail_len - Length of the tail buffer in octets
*/
size_t tail_len;
/**
* dtim_period - DTIM period
*/
int dtim_period;
/**
* beacon_int - Beacon interval
*/
int beacon_int;
/**
* basic_rates: -1 terminated array of basic rates in 100 kbps
*
* This parameter can be used to set a specific basic rate set for the
* BSS. If %NULL, default basic rate set is used.
*/
int *basic_rates;
/**
* beacon_rate: Beacon frame data rate
*
* This parameter can be used to set a specific Beacon frame data rate
* for the BSS. The interpretation of this value depends on the
* rate_type (legacy: in 100 kbps units, HT: HT-MCS, VHT: VHT-MCS). If
* beacon_rate == 0 and rate_type == 0 (BEACON_RATE_LEGACY), the default
* Beacon frame data rate is used.
*/
unsigned int beacon_rate;
/**
* beacon_rate_type: Beacon data rate type (legacy/HT/VHT)
*/
enum beacon_rate_type rate_type;
/**
* proberesp - Probe Response template
*
* This is used by drivers that reply to Probe Requests internally in
* AP mode and require the full Probe Response template.
*/
u8 *proberesp;
/**
* proberesp_len - Length of the proberesp buffer in octets
*/
size_t proberesp_len;
/**
* ssid - The SSID to use in Beacon/Probe Response frames
*/
const u8 *ssid;
/**
* ssid_len - Length of the SSID (1..32)
*/
size_t ssid_len;
/**
* hide_ssid - Whether to hide the SSID
*/
enum hide_ssid hide_ssid;
/**
* pairwise_ciphers - WPA_CIPHER_* bitfield
*/
unsigned int pairwise_ciphers;
/**
* group_cipher - WPA_CIPHER_*
*/
unsigned int group_cipher;
/**
* key_mgmt_suites - WPA_KEY_MGMT_* bitfield
*/
unsigned int key_mgmt_suites;
/**
* auth_algs - WPA_AUTH_ALG_* bitfield
*/
unsigned int auth_algs;
/**
* wpa_version - WPA_PROTO_* bitfield
*/
unsigned int wpa_version;
/**
* privacy - Whether privacy is used in the BSS
*/
int privacy;
/**
* beacon_ies - WPS/P2P IE(s) for Beacon frames
*
* This is used to add IEs like WPS IE and P2P IE by drivers that do
* not use the full Beacon template.
*/
const struct wpabuf *beacon_ies;
/**
* proberesp_ies - P2P/WPS IE(s) for Probe Response frames
*
* This is used to add IEs like WPS IE and P2P IE by drivers that
* reply to Probe Request frames internally.
*/
const struct wpabuf *proberesp_ies;
/**
* assocresp_ies - WPS IE(s) for (Re)Association Response frames
*
* This is used to add IEs like WPS IE by drivers that reply to
* (Re)Association Request frames internally.
*/
const struct wpabuf *assocresp_ies;
/**
* isolate - Whether to isolate frames between associated stations
*
* If this is non-zero, the AP is requested to disable forwarding of
* frames between associated stations.
*/
int isolate;
/**
* cts_protect - Whether CTS protection is enabled
*/
int cts_protect;
/**
* preamble - Whether short preamble is enabled
*/
int preamble;
/**
* short_slot_time - Whether short slot time is enabled
*
* 0 = short slot time disable, 1 = short slot time enabled, -1 = do
* not set (e.g., when 802.11g mode is not in use)
*/
int short_slot_time;
/**
* ht_opmode - HT operation mode or -1 if HT not in use
*/
int ht_opmode;
/**
* interworking - Whether Interworking is enabled
*/
int interworking;
/**
* hessid - Homogeneous ESS identifier or %NULL if not set
*/
const u8 *hessid;
/**
* access_network_type - Access Network Type (0..15)
*
* This is used for filtering Probe Request frames when Interworking is
* enabled.
*/
u8 access_network_type;
/**
* ap_max_inactivity - Timeout in seconds to detect STA's inactivity
*
* This is used by driver which advertises this capability.
*/
int ap_max_inactivity;
/**
* ctwindow - Client Traffic Window (in TUs)
*/
u8 p2p_go_ctwindow;
/**
* smps_mode - SMPS mode
*
* SMPS mode to be used by the AP, specified as the relevant bits of
* ht_capab (i.e. HT_CAP_INFO_SMPS_*).
*/
unsigned int smps_mode;
/**
* disable_dgaf - Whether group-addressed frames are disabled
*/
int disable_dgaf;
/**
* osen - Whether OSEN security is enabled
*/
int osen;
/**
* freq - Channel parameters for dynamic bandwidth changes
*/
struct hostapd_freq_params *freq;
/**
* reenable - Whether this is to re-enable beaconing
*/
int reenable;
/**
* pbss - Whether to start a PCP (in PBSS) instead of an AP in
* infrastructure BSS. Valid only for DMG network.
*/
int pbss;
/**
* multicast_to_unicast - Whether to use multicast_to_unicast
*
* If this is non-zero, the AP is requested to perform multicast to
* unicast conversion for ARP, IPv4, and IPv6 frames (possibly within
* 802.1Q). If enabled, such frames are to be sent to each station
* separately, with the DA replaced by their own MAC address rather
* than the group address.
*
* Note that this may break certain expectations of the receiver, such
* as the ability to drop unicast IP packets received within multicast
* L2 frames, or the ability to not send ICMP destination unreachable
* messages for packets received in L2 multicast (which is required,
* but the receiver can't tell the difference if this new option is
* enabled.)
*
* This also doesn't implement the 802.11 DMS (directed multicast
* service).
*/
int multicast_to_unicast;
};
struct wpa_driver_mesh_bss_params {
#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS 0x00000001
#define WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT 0x00000002
#define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
#define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008
/*
* TODO: Other mesh configuration parameters would go here.
* See NL80211_MESHCONF_* for all the mesh config parameters.
*/
unsigned int flags;
int auto_plinks;
int peer_link_timeout;
int max_peer_links;
u16 ht_opmode;
};
struct wpa_driver_mesh_join_params {
const u8 *meshid;
int meshid_len;
const int *basic_rates;
const u8 *ies;
int ie_len;
struct hostapd_freq_params freq;
int beacon_int;
int dtim_period;
struct wpa_driver_mesh_bss_params conf;
#define WPA_DRIVER_MESH_FLAG_USER_MPM 0x00000001
#define WPA_DRIVER_MESH_FLAG_DRIVER_MPM 0x00000002
#define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004
#define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008
unsigned int flags;
};
/**
* struct wpa_driver_capa - Driver capability information
*/
struct wpa_driver_capa {
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA 0x00000001
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA2 0x00000002
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK 0x00000004
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK 0x00000008
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE 0x00000010
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
#define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B 0x00000100
#define WPA_DRIVER_CAPA_KEY_MGMT_SUITE_B_192 0x00000200
/** Bitfield of supported key management suites */
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
#define WPA_DRIVER_CAPA_ENC_WEP104 0x00000002
#define WPA_DRIVER_CAPA_ENC_TKIP 0x00000004
#define WPA_DRIVER_CAPA_ENC_CCMP 0x00000008
#define WPA_DRIVER_CAPA_ENC_WEP128 0x00000010
#define WPA_DRIVER_CAPA_ENC_GCMP 0x00000020
#define WPA_DRIVER_CAPA_ENC_GCMP_256 0x00000040
#define WPA_DRIVER_CAPA_ENC_CCMP_256 0x00000080
#define WPA_DRIVER_CAPA_ENC_BIP 0x00000100
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_128 0x00000200
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
#define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000
/** Bitfield of supported cipher suites */
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_AUTH_SHARED 0x00000002
#define WPA_DRIVER_AUTH_LEAP 0x00000004
/** Bitfield of supported IEEE 802.11 authentication algorithms */
unsigned int auth;
/** Driver generated WPA/RSN IE */
#define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001
/** Driver needs static WEP key setup after association command */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002
/** Driver takes care of all DFS operations */
#define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004
/** Driver takes care of RSN 4-way handshake internally; PMK is configured with
* struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008
/** Driver is for a wired Ethernet interface */
#define WPA_DRIVER_FLAGS_WIRED 0x00000010
/** Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
/** Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
/** Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
/** Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
#define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100
/** Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
/**
* Driver uses the initial interface as a dedicated management interface, i.e.,
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
/** This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
/** Driver supports station and key removal when stopping an AP */
#define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000
/**
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
* P2P group operations.
*/
#define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000
/**
* Driver is known to use sane error codes, i.e., when it indicates that
* something (e.g., association) fails, there was indeed a failure and the
* operation does not end up getting completed successfully later.
*/
#define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000
/** Driver supports off-channel TX */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000
/** Driver indicates TX status events for EAPOL Data frames */
#define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000
/** Driver indicates TX status events for Deauth/Disassoc frames */
#define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000
/** Driver supports roaming (BSS selection) in firmware */
#define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000
/** Driver supports operating as a TDLS peer */
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
/** Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
/** Driver indicates support for Probe Response offloading in AP mode */
#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
/** Driver supports U-APSD in AP mode */
#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
/** Driver supports inactivity timer in AP mode */
#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
/** Driver expects user space implementation of MLME in AP mode */
#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
/** Driver supports SAE with user space SME */
#define WPA_DRIVER_FLAGS_SAE 0x02000000
/** Driver makes use of OBSS scan mechanism in wpa_supplicant */
#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
/** Driver supports IBSS (Ad-hoc) mode */
#define WPA_DRIVER_FLAGS_IBSS 0x08000000
/** Driver supports radar detection */
#define WPA_DRIVER_FLAGS_RADAR 0x10000000
/** Driver supports a dedicated interface for P2P Device */
#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
/** Driver supports QoS Mapping */
#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
/** Driver supports CSA in AP mode */
#define WPA_DRIVER_FLAGS_AP_CSA 0x80000000
/** Driver supports mesh */
#define WPA_DRIVER_FLAGS_MESH 0x0000000100000000ULL
/** Driver support ACS offload */
#define WPA_DRIVER_FLAGS_ACS_OFFLOAD 0x0000000200000000ULL
/** Driver supports key management offload */
#define WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD 0x0000000400000000ULL
/** Driver supports TDLS channel switching */
#define WPA_DRIVER_FLAGS_TDLS_CHANNEL_SWITCH 0x0000000800000000ULL
/** Driver supports IBSS with HT datarates */
#define WPA_DRIVER_FLAGS_HT_IBSS 0x0000001000000000ULL
/** Driver supports IBSS with VHT datarates */
#define WPA_DRIVER_FLAGS_VHT_IBSS 0x0000002000000000ULL
/** Driver supports automatic band selection */
#define WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY 0x0000004000000000ULL
/** Driver supports simultaneous off-channel operations */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_SIMULTANEOUS 0x0000008000000000ULL
/** Driver supports full AP client state */
#define WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE 0x0000010000000000ULL
/** Driver supports P2P Listen offload */
#define WPA_DRIVER_FLAGS_P2P_LISTEN_OFFLOAD 0x0000020000000000ULL
/** Driver supports FILS */
#define WPA_DRIVER_FLAGS_SUPPORT_FILS 0x0000040000000000ULL
/** Driver supports Beacon frame TX rate configuration (legacy rates) */
#define WPA_DRIVER_FLAGS_BEACON_RATE_LEGACY 0x0000080000000000ULL
/** Driver supports Beacon frame TX rate configuration (HT rates) */
#define WPA_DRIVER_FLAGS_BEACON_RATE_HT 0x0000100000000000ULL
/** Driver supports Beacon frame TX rate configuration (VHT rates) */
#define WPA_DRIVER_FLAGS_BEACON_RATE_VHT 0x0000200000000000ULL
u64 flags;
#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
(drv_flags & WPA_DRIVER_FLAGS_FULL_AP_CLIENT_STATE)
#define WPA_DRIVER_SMPS_MODE_STATIC 0x00000001
#define WPA_DRIVER_SMPS_MODE_DYNAMIC 0x00000002
unsigned int smps_modes;
unsigned int wmm_ac_supported:1;
unsigned int mac_addr_rand_scan_supported:1;
unsigned int mac_addr_rand_sched_scan_supported:1;
/** Maximum number of supported active probe SSIDs */
int max_scan_ssids;
/** Maximum number of supported active probe SSIDs for sched_scan */
int max_sched_scan_ssids;
/** Maximum number of supported scan plans for scheduled scan */
unsigned int max_sched_scan_plans;
/** Maximum interval in a scan plan. In seconds */
u32 max_sched_scan_plan_interval;
/** Maximum number of iterations in a single scan plan */
u32 max_sched_scan_plan_iterations;
/** Whether sched_scan (offloaded scanning) is supported */
int sched_scan_supported;
/** Maximum number of supported match sets for sched_scan */
int max_match_sets;
/**
* max_remain_on_chan - Maximum remain-on-channel duration in msec
*/
unsigned int max_remain_on_chan;
/**
* max_stations - Maximum number of associated stations the driver
* supports in AP mode
*/
unsigned int max_stations;
/**
* probe_resp_offloads - Bitmap of supported protocols by the driver
* for Probe Response offloading.
*/
/** Driver Probe Response offloading support for WPS ver. 1 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
/** Driver Probe Response offloading support for WPS ver. 2 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
/** Driver Probe Response offloading support for P2P */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
/** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
unsigned int probe_resp_offloads;
unsigned int max_acl_mac_addrs;
/**
* Number of supported concurrent channels
*/
unsigned int num_multichan_concurrent;
/**
* extended_capa - extended capabilities in driver/device
*
* Must be allocated and freed by driver and the pointers must be
* valid for the lifetime of the driver, i.e., freed in deinit()
*/
const u8 *extended_capa, *extended_capa_mask;
unsigned int extended_capa_len;
struct wowlan_triggers wowlan_triggers;
/** Driver adds the DS Params Set IE in Probe Request frames */
#define WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES 0x00000001
/** Driver adds the WFA TPC IE in Probe Request frames */
#define WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES 0x00000002
/** Driver handles quiet period requests */
#define WPA_DRIVER_FLAGS_QUIET 0x00000004
/**
* Driver is capable of inserting the current TX power value into the body of
* transmitted frames.
* Background: Some Action frames include a TPC Report IE. This IE contains a
* TX power field, which has to be updated by lower layers. One such Action
* frame is Link Measurement Report (part of RRM). Another is TPC Report (part
* of spectrum management). Note that this insertion takes place at a fixed
* offset, namely the 6th byte in the Action frame body.
*/
#define WPA_DRIVER_FLAGS_TX_POWER_INSERTION 0x00000008
/**
* Driver supports RRM. With this support, the driver will accept to use RRM in
* (Re)Association Request frames, without supporting quiet period.
*/
#define WPA_DRIVER_FLAGS_SUPPORT_RRM 0x00000010
/** Driver supports setting the scan dwell time */
#define WPA_DRIVER_FLAGS_SUPPORT_SET_SCAN_DWELL 0x00000020
/** Driver supports Beacon Report Measurement */
#define WPA_DRIVER_FLAGS_SUPPORT_BEACON_REPORT 0x00000040
u32 rrm_flags;
/* Driver concurrency capabilities */
unsigned int conc_capab;
/* Maximum number of concurrent channels on 2.4 GHz */
unsigned int max_conc_chan_2_4;
/* Maximum number of concurrent channels on 5 GHz */
unsigned int max_conc_chan_5_0;
/* Maximum number of supported CSA counters */
u16 max_csa_counters;
};
struct hostapd_data;
struct hostap_sta_driver_data {
unsigned long rx_packets, tx_packets;
unsigned long long rx_bytes, tx_bytes;
int bytes_64bit; /* whether 64-bit byte counters are supported */
unsigned long current_tx_rate;
unsigned long inactive_msec;
unsigned long flags;
unsigned long num_ps_buf_frames;
unsigned long tx_retry_failed;
unsigned long tx_retry_count;
int last_rssi;
int last_ack_rssi;
};
struct hostapd_sta_add_params {
const u8 *addr;
u16 aid;
u16 capability;
const u8 *supp_rates;
size_t supp_rates_len;
u16 listen_interval;
const struct ieee80211_ht_capabilities *ht_capabilities;
const struct ieee80211_vht_capabilities *vht_capabilities;
int vht_opmode_enabled;
u8 vht_opmode;
u32 flags; /* bitmask of WPA_STA_* flags */
u32 flags_mask; /* unset bits in flags */
#ifdef CONFIG_MESH
enum mesh_plink_state plink_state;
u16 peer_aid;
#endif /* CONFIG_MESH */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
const u8 *ext_capab;
size_t ext_capab_len;
const u8 *supp_channels;
size_t supp_channels_len;
const u8 *supp_oper_classes;
size_t supp_oper_classes_len;
int support_p2p_ps;
};
struct mac_address {
u8 addr[ETH_ALEN];
};
struct hostapd_acl_params {
u8 acl_policy;
unsigned int num_mac_acl;
struct mac_address mac_acl[0];
};
enum wpa_driver_if_type {
/**
* WPA_IF_STATION - Station mode interface
*/
WPA_IF_STATION,
/**
* WPA_IF_AP_VLAN - AP mode VLAN interface
*
* This interface shares its address and Beacon frame with the main
* BSS.
*/
WPA_IF_AP_VLAN,
/**
* WPA_IF_AP_BSS - AP mode BSS interface
*
* This interface has its own address and Beacon frame.
*/
WPA_IF_AP_BSS,
/**
* WPA_IF_P2P_GO - P2P Group Owner
*/
WPA_IF_P2P_GO,
/**
* WPA_IF_P2P_CLIENT - P2P Client
*/
WPA_IF_P2P_CLIENT,
/**
* WPA_IF_P2P_GROUP - P2P Group interface (will become either
* WPA_IF_P2P_GO or WPA_IF_P2P_CLIENT, but the role is not yet known)
*/
WPA_IF_P2P_GROUP,
/**
* WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the
* abstracted P2P Device function in the driver
*/
WPA_IF_P2P_DEVICE,
/*
* WPA_IF_MESH - Mesh interface
*/
WPA_IF_MESH,
/*
* WPA_IF_TDLS - TDLS offchannel interface (used for pref freq only)
*/
WPA_IF_TDLS,
/*
* WPA_IF_IBSS - IBSS interface (used for pref freq only)
*/
WPA_IF_IBSS,
};
struct wpa_init_params {
void *global_priv;
const u8 *bssid;
const char *ifname;
const char *driver_params;
int use_pae_group_addr;
char **bridge;
size_t num_bridge;
u8 *own_addr; /* buffer for writing own MAC address */
};
struct wpa_bss_params {
/** Interface name (for multi-SSID/VLAN support) */
const char *ifname;
/** Whether IEEE 802.1X or WPA/WPA2 is enabled */
int enabled;
int wpa;
int ieee802_1x;
int wpa_group;
int wpa_pairwise;
int wpa_key_mgmt;
int rsn_preauth;
enum mfp_options ieee80211w;
};
#define WPA_STA_AUTHORIZED BIT(0)
#define WPA_STA_WMM BIT(1)
#define WPA_STA_SHORT_PREAMBLE BIT(2)
#define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4)
#define WPA_STA_AUTHENTICATED BIT(5)
#define WPA_STA_ASSOCIATED BIT(6)
enum tdls_oper {
TDLS_DISCOVERY_REQ,
TDLS_SETUP,
TDLS_TEARDOWN,
TDLS_ENABLE_LINK,
TDLS_DISABLE_LINK,
TDLS_ENABLE,
TDLS_DISABLE
};
enum wnm_oper {
WNM_SLEEP_ENTER_CONFIRM,
WNM_SLEEP_ENTER_FAIL,
WNM_SLEEP_EXIT_CONFIRM,
WNM_SLEEP_EXIT_FAIL,
WNM_SLEEP_TFS_REQ_IE_ADD, /* STA requests driver to add TFS req IE */
WNM_SLEEP_TFS_REQ_IE_NONE, /* STA requests empty TFS req IE */
WNM_SLEEP_TFS_REQ_IE_SET, /* AP requests driver to set TFS req IE for
* a STA */
WNM_SLEEP_TFS_RESP_IE_ADD, /* AP requests driver to add TFS resp IE
* for a STA */
WNM_SLEEP_TFS_RESP_IE_NONE, /* AP requests empty TFS resp IE */
WNM_SLEEP_TFS_RESP_IE_SET, /* AP requests driver to set TFS resp IE
* for a STA */
WNM_SLEEP_TFS_IE_DEL /* AP delete the TFS IE */
};
/* enum chan_width - Channel width definitions */
enum chan_width {
CHAN_WIDTH_20_NOHT,
CHAN_WIDTH_20,
CHAN_WIDTH_40,
CHAN_WIDTH_80,
CHAN_WIDTH_80P80,
CHAN_WIDTH_160,
CHAN_WIDTH_UNKNOWN
};
/**
* struct wpa_signal_info - Information about channel signal quality
*/
struct wpa_signal_info {
u32 frequency;
int above_threshold;
int current_signal;
int avg_signal;
int avg_beacon_signal;
int current_noise;
int current_txrate;
enum chan_width chanwidth;
int center_frq1;
int center_frq2;
};
/**
* struct beacon_data - Beacon data
* @head: Head portion of Beacon frame (before TIM IE)
* @tail: Tail portion of Beacon frame (after TIM IE)
* @beacon_ies: Extra information element(s) to add into Beacon frames or %NULL
* @proberesp_ies: Extra information element(s) to add into Probe Response
* frames or %NULL
* @assocresp_ies: Extra information element(s) to add into (Re)Association
* Response frames or %NULL
* @probe_resp: Probe Response frame template
* @head_len: Length of @head
* @tail_len: Length of @tail
* @beacon_ies_len: Length of beacon_ies in octets
* @proberesp_ies_len: Length of proberesp_ies in octets
* @proberesp_ies_len: Length of proberesp_ies in octets
* @probe_resp_len: Length of probe response template (@probe_resp)
*/
struct beacon_data {
u8 *head, *tail;
u8 *beacon_ies;
u8 *proberesp_ies;
u8 *assocresp_ies;
u8 *probe_resp;
size_t head_len, tail_len;
size_t beacon_ies_len;
size_t proberesp_ies_len;
size_t assocresp_ies_len;
size_t probe_resp_len;
};
/**
* struct csa_settings - Settings for channel switch command
* @cs_count: Count in Beacon frames (TBTT) to perform the switch
* @block_tx: 1 - block transmission for CSA period
* @freq_params: Next channel frequency parameter
* @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
* @beacon_after: Next beacon/probe resp/asooc resp info
* @counter_offset_beacon: Offset to the count field in beacon's tail
* @counter_offset_presp: Offset to the count field in probe resp.
*/
struct csa_settings {
u8 cs_count;
u8 block_tx;
struct hostapd_freq_params freq_params;
struct beacon_data beacon_csa;
struct beacon_data beacon_after;
u16 counter_offset_beacon[2];
u16 counter_offset_presp[2];
};
/* TDLS peer capabilities for send_tdls_mgmt() */
enum tdls_peer_capability {
TDLS_PEER_HT = BIT(0),
TDLS_PEER_VHT = BIT(1),
TDLS_PEER_WMM = BIT(2),
};
/* valid info in the wmm_params struct */
enum wmm_params_valid_info {
WMM_PARAMS_UAPSD_QUEUES_INFO = BIT(0),
};
/**
* struct wmm_params - WMM parameterss configured for this association
* @info_bitmap: Bitmap of valid wmm_params info; indicates what fields
* of the struct contain valid information.
* @uapsd_queues: Bitmap of ACs configured for uapsd (valid only if
* %WMM_PARAMS_UAPSD_QUEUES_INFO is set)
*/
struct wmm_params {
u8 info_bitmap;
u8 uapsd_queues;
};
#ifdef CONFIG_MACSEC
struct macsec_init_params {
Boolean always_include_sci;
Boolean use_es;
Boolean use_scb;
};
#endif /* CONFIG_MACSEC */
enum drv_br_port_attr {
DRV_BR_PORT_ATTR_PROXYARP,
DRV_BR_PORT_ATTR_HAIRPIN_MODE,
};
enum drv_br_net_param {
DRV_BR_NET_PARAM_GARP_ACCEPT,
DRV_BR_MULTICAST_SNOOPING,
};
struct drv_acs_params {
/* Selected mode (HOSTAPD_MODE_*) */
enum hostapd_hw_mode hw_mode;
/* Indicates whether HT is enabled */
int ht_enabled;
/* Indicates whether HT40 is enabled */
int ht40_enabled;
/* Indicates whether VHT is enabled */
int vht_enabled;
/* Configured ACS channel width */
u16 ch_width;
/* ACS channel list info */
unsigned int ch_list_len;
const u8 *ch_list;
const int *freq_list;
};
/**
* struct wpa_driver_ops - Driver interface API definition
*
* This structure defines the API that each driver interface needs to implement
* for core wpa_supplicant code. All driver specific functionality is captured
* in this wrapper.
*/
struct wpa_driver_ops {
/** Name of the driver interface */
const char *name;
/** One line description of the driver interface */
const char *desc;
/**
* get_bssid - Get the current BSSID
* @priv: private driver interface data
* @bssid: buffer for BSSID (ETH_ALEN = 6 bytes)
*
* Returns: 0 on success, -1 on failure
*
* Query kernel driver for the current BSSID and copy it to bssid.
* Setting bssid to 00:00:00:00:00:00 is recommended if the STA is not
* associated.
*/
int (*get_bssid)(void *priv, u8 *bssid);
/**
* get_ssid - Get the current SSID
* @priv: private driver interface data
* @ssid: buffer for SSID (at least 32 bytes)
*
* Returns: Length of the SSID on success, -1 on failure
*
* Query kernel driver for the current SSID and copy it to ssid.
* Returning zero is recommended if the STA is not associated.
*
* Note: SSID is an array of octets, i.e., it is not nul terminated and
* can, at least in theory, contain control characters (including nul)
* and as such, should be processed as binary data, not a printable
* string.
*/
int (*get_ssid)(void *priv, u8 *ssid);
/**
* set_key - Configure encryption key
* @ifname: Interface name (for multi-SSID/VLAN support)
* @priv: private driver interface data
* @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP,
* %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK,
* %WPA_ALG_GCMP, %WPA_ALG_GCMP_256, %WPA_ALG_CCMP_256,
* %WPA_ALG_BIP_GMAC_128, %WPA_ALG_BIP_GMAC_256,
* %WPA_ALG_BIP_CMAC_256);
* %WPA_ALG_NONE clears the key.
* @addr: Address of the peer STA (BSSID of the current AP when setting
* pairwise key in station mode), ff:ff:ff:ff:ff:ff for
* broadcast keys, %NULL for default keys that are used both for
* broadcast and unicast; when clearing keys, %NULL is used to
* indicate that both the broadcast-only and default key of the
* specified key index is to be cleared
* @key_idx: key index (0..3), usually 0 for unicast keys; 0..4095 for
* IGTK
* @set_tx: configure this key as the default Tx key (only used when
* driver does not support separate unicast/individual key
* @seq: sequence number/packet number, seq_len octets, the next
* packet number to be used for in replay protection; configured
* for Rx keys (in most cases, this is only used with broadcast
* keys and set to zero for unicast keys); %NULL if not set
* @seq_len: length of the seq, depends on the algorithm:
* TKIP: 6 octets, CCMP/GCMP: 6 octets, IGTK: 6 octets
* @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key,
* 8-byte Rx Mic Key
* @key_len: length of the key buffer in octets (WEP: 5 or 13,
* TKIP: 32, CCMP/GCMP: 16, IGTK: 16)
*
* Returns: 0 on success, -1 on failure
*
* Configure the given key for the kernel driver. If the driver
* supports separate individual keys (4 default keys + 1 individual),
* addr can be used to determine whether the key is default or
* individual. If only 4 keys are supported, the default key with key
* index 0 is used as the individual key. STA must be configured to use
* it as the default Tx key (set_tx is set) and accept Rx for all the
* key indexes. In most cases, WPA uses only key indexes 1 and 2 for
* broadcast keys, so key index 0 is available for this kind of
* configuration.
*
* Please note that TKIP keys include separate TX and RX MIC keys and
* some drivers may expect them in different order than wpa_supplicant
* is using. If the TX/RX keys are swapped, all TKIP encrypted packets
* will trigger Michael MIC errors. This can be fixed by changing the
* order of MIC keys by swapping te bytes 16..23 and 24..31 of the key
* in driver_*.c set_key() implementation, see driver_ndis.c for an
* example on how this can be done.
*/
int (*set_key)(const char *ifname, void *priv, enum wpa_alg alg,
const u8 *addr, int key_idx, int set_tx,
const u8 *seq, size_t seq_len,
const u8 *key, size_t key_len);
/**
* init - Initialize driver interface
* @ctx: context to be used when calling wpa_supplicant functions,
* e.g., wpa_supplicant_event()
* @ifname: interface name, e.g., wlan0
*
* Returns: Pointer to private data, %NULL on failure
*
* Initialize driver interface, including event processing for kernel
* driver events (e.g., associated, scan results, Michael MIC failure).
* This function can allocate a private configuration data area for
* @ctx, file descriptor, interface name, etc. information that may be
* needed in future driver operations. If this is not used, non-NULL
* value will need to be returned because %NULL is used to indicate
* failure. The returned value will be used as 'void *priv' data for
* all other driver_ops functions.
*
* The main event loop (eloop.c) of wpa_supplicant can be used to
* register callback for read sockets (eloop_register_read_sock()).
*
* See below for more information about events and
* wpa_supplicant_event() function.
*/
void * (*init)(void *ctx, const char *ifname);
/**
* deinit - Deinitialize driver interface
* @priv: private driver interface data from init()
*
* Shut down driver interface and processing of driver events. Free
* private data buffer if one was allocated in init() handler.
*/
void (*deinit)(void *priv);
/**
* set_param - Set driver configuration parameters
* @priv: private driver interface data from init()
* @param: driver specific configuration parameters
*
* Returns: 0 on success, -1 on failure
*
* Optional handler for notifying driver interface about configuration
* parameters (driver_param).
*/
int (*set_param)(void *priv, const char *param);
/**
* set_countermeasures - Enable/disable TKIP countermeasures
* @priv: private driver interface data
* @enabled: 1 = countermeasures enabled, 0 = disabled
*
* Returns: 0 on success, -1 on failure
*
* Configure TKIP countermeasures. When these are enabled, the driver
* should drop all received and queued frames that are using TKIP.
*/
int (*set_countermeasures)(void *priv, int enabled);
/**
* deauthenticate - Request driver to deauthenticate
* @priv: private driver interface data
* @addr: peer address (BSSID of the AP)
* @reason_code: 16-bit reason code to be sent in the deauthentication
* frame
*
* Returns: 0 on success, -1 on failure
*/
int (*deauthenticate)(void *priv, const u8 *addr, int reason_code);
/**
* associate - Request driver to associate
* @priv: private driver interface data
* @params: association parameters
*
* Returns: 0 on success, -1 on failure
*/
int (*associate)(void *priv,
struct wpa_driver_associate_params *params);
/**
* add_pmkid - Add PMKSA cache entry to the driver
* @priv: private driver interface data
* @bssid: BSSID for the PMKSA cache entry
* @pmkid: PMKID for the PMKSA cache entry
*
* Returns: 0 on success, -1 on failure
*
* This function is called when a new PMK is received, as a result of
* either normal authentication or RSN pre-authentication.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), add_pmkid() can be used to add new PMKSA cache entries
* in the driver. If the driver uses wpa_ie from wpa_supplicant, this
* driver_ops function does not need to be implemented. Likewise, if
* the driver does not support WPA, this function is not needed.
*/
int (*add_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid);
/**
* remove_pmkid - Remove PMKSA cache entry to the driver
* @priv: private driver interface data
* @bssid: BSSID for the PMKSA cache entry
* @pmkid: PMKID for the PMKSA cache entry
*
* Returns: 0 on success, -1 on failure
*
* This function is called when the supplicant drops a PMKSA cache
* entry for any reason.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), remove_pmkid() can be used to synchronize PMKSA caches
* between the driver and wpa_supplicant. If the driver uses wpa_ie
* from wpa_supplicant, this driver_ops function does not need to be
* implemented. Likewise, if the driver does not support WPA, this
* function is not needed.
*/
int (*remove_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid);
/**
* flush_pmkid - Flush PMKSA cache
* @priv: private driver interface data
*
* Returns: 0 on success, -1 on failure
*
* This function is called when the supplicant drops all PMKSA cache
* entries for any reason.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), remove_pmkid() can be used to synchronize PMKSA caches
* between the driver and wpa_supplicant. If the driver uses wpa_ie
* from wpa_supplicant, this driver_ops function does not need to be
* implemented. Likewise, if the driver does not support WPA, this
* function is not needed.
*/
int (*flush_pmkid)(void *priv);
/**
* get_capa - Get driver capabilities
* @priv: private driver interface data
*
* Returns: 0 on success, -1 on failure
*
* Get driver/firmware/hardware capabilities.
*/
int (*get_capa)(void *priv, struct wpa_driver_capa *capa);
/**
* poll - Poll driver for association information
* @priv: private driver interface data
*
* This is an option callback that can be used when the driver does not
* provide event mechanism for association events. This is called when
* receiving WPA EAPOL-Key messages that require association
* information. The driver interface is supposed to generate associnfo
* event before returning from this callback function. In addition, the
* driver interface should generate an association event after having
* sent out associnfo.
*/
void (*poll)(void *priv);
/**
* get_ifindex - Get interface index
* @priv: private driver interface data
*
* Returns: Interface index
*/
unsigned int (*get_ifindex)(void *priv);
/**
* get_ifname - Get interface name
* @priv: private driver interface data
*
* Returns: Pointer to the interface name. This can differ from the
* interface name used in init() call. Init() is called first.
*
* This optional function can be used to allow the driver interface to
* replace the interface name with something else, e.g., based on an
* interface mapping from a more descriptive name.
*/
const char * (*get_ifname)(void *priv);
/**
* get_mac_addr - Get own MAC address
* @priv: private driver interface data
*
* Returns: Pointer to own MAC address or %NULL on failure
*
* This optional function can be used to get the own MAC address of the
* device from the driver interface code. This is only needed if the
* l2_packet implementation for the OS does not provide easy access to
* a MAC address. */
const u8 * (*get_mac_addr)(void *priv);
/**
* set_operstate - Sets device operating state to DORMANT or UP
* @priv: private driver interface data
* @state: 0 = dormant, 1 = up
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used on operating systems
* that support a concept of controlling network device state from user
* space applications. This function, if set, gets called with
* state = 1 when authentication has been completed and with state = 0
* when connection is lost.
*/
int (*set_operstate)(void *priv, int state);
/**
* mlme_setprotection - MLME-SETPROTECTION.request primitive
* @priv: Private driver interface data
* @addr: Address of the station for which to set protection (may be
* %NULL for group keys)
* @protect_type: MLME_SETPROTECTION_PROTECT_TYPE_*
* @key_type: MLME_SETPROTECTION_KEY_TYPE_*
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used to set the driver to
* require protection for Tx and/or Rx frames. This uses the layer
* interface defined in IEEE 802.11i-2004 clause 10.3.22.1
* (MLME-SETPROTECTION.request). Many drivers do not use explicit
* set protection operation; instead, they set protection implicitly
* based on configured keys.
*/
int (*mlme_setprotection)(void *priv, const u8 *addr, int protect_type,
int key_type);
/**
* get_hw_feature_data - Get hardware support data (channels and rates)
* @priv: Private driver interface data
* @num_modes: Variable for returning the number of returned modes
* flags: Variable for returning hardware feature flags
* Returns: Pointer to allocated hardware data on success or %NULL on
* failure. Caller is responsible for freeing this.
*/
struct hostapd_hw_modes * (*get_hw_feature_data)(void *priv,
u16 *num_modes,
u16 *flags);
/**
* send_mlme - Send management frame from MLME
* @priv: Private driver interface data
* @data: IEEE 802.11 management frame with IEEE 802.11 header
* @data_len: Size of the management frame
* @noack: Do not wait for this frame to be acked (disable retries)
* @freq: Frequency (in MHz) to send the frame on, or 0 to let the
* driver decide
* @csa_offs: Array of CSA offsets or %NULL
* @csa_offs_len: Number of elements in csa_offs
* Returns: 0 on success, -1 on failure
*/
int (*send_mlme)(void *priv, const u8 *data, size_t data_len,
int noack, unsigned int freq, const u16 *csa_offs,
size_t csa_offs_len);
/**
* update_ft_ies - Update FT (IEEE 802.11r) IEs
* @priv: Private driver interface data
* @md: Mobility domain (2 octets) (also included inside ies)
* @ies: FT IEs (MDIE, FTIE, ...) or %NULL to remove IEs
* @ies_len: Length of FT IEs in bytes
* Returns: 0 on success, -1 on failure
*
* The supplicant uses this callback to let the driver know that keying
* material for FT is available and that the driver can use the
* provided IEs in the next message in FT authentication sequence.
*
* This function is only needed for driver that support IEEE 802.11r
* (Fast BSS Transition).
*/
int (*update_ft_ies)(void *priv, const u8 *md, const u8 *ies,
size_t ies_len);
/**
* get_scan_results2 - Fetch the latest scan results
* @priv: private driver interface data
*
* Returns: Allocated buffer of scan results (caller is responsible for
* freeing the data structure) on success, NULL on failure
*/
struct wpa_scan_results * (*get_scan_results2)(void *priv);
/**
* set_country - Set country
* @priv: Private driver interface data
* @alpha2: country to which to switch to
* Returns: 0 on success, -1 on failure
*
* This function is for drivers which support some form
* of setting a regulatory domain.
*/
int (*set_country)(void *priv, const char *alpha2);
/**
* get_country - Get country
* @priv: Private driver interface data
* @alpha2: Buffer for returning country code (at least 3 octets)
* Returns: 0 on success, -1 on failure
*/
int (*get_country)(void *priv, char *alpha2);
/**
* global_init - Global driver initialization
* @ctx: wpa_global pointer
* Returns: Pointer to private data (global), %NULL on failure
*
* This optional function is called to initialize the driver wrapper
* for global data, i.e., data that applies to all interfaces. If this
* function is implemented, global_deinit() will also need to be
* implemented to free the private data. The driver will also likely
* use init2() function instead of init() to get the pointer to global
* data available to per-interface initializer.
*/
void * (*global_init)(void *ctx);
/**
* global_deinit - Global driver deinitialization
* @priv: private driver global data from global_init()
*
* Terminate any global driver related functionality and free the
* global data structure.
*/
void (*global_deinit)(void *priv);
/**
* init2 - Initialize driver interface (with global data)
* @ctx: context to be used when calling wpa_supplicant functions,
* e.g., wpa_supplicant_event()
* @ifname: interface name, e.g., wlan0
* @global_priv: private driver global data from global_init()
* Returns: Pointer to private data, %NULL on failure
*
* This function can be used instead of init() if the driver wrapper
* uses global data.
*/
void * (*init2)(void *ctx, const char *ifname, void *global_priv);
/**
* get_interfaces - Get information about available interfaces
* @global_priv: private driver global data from global_init()
* Returns: Allocated buffer of interface information (caller is
* responsible for freeing the data structure) on success, NULL on
* failure
*/
struct wpa_interface_info * (*get_interfaces)(void *global_priv);
/**
* scan2 - Request the driver to initiate scan
* @priv: private driver interface data
* @params: Scan parameters
*
* Returns: 0 on success, -1 on failure
*
* Once the scan results are ready, the driver should report scan
* results event for wpa_supplicant which will eventually request the
* results with wpa_driver_get_scan_results2().
*/
int (*scan2)(void *priv, struct wpa_driver_scan_params *params);
/**
* authenticate - Request driver to authenticate
* @priv: private driver interface data
* @params: authentication parameters
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used with drivers that
* support separate authentication and association steps, i.e., when
* wpa_supplicant can act as the SME. If not implemented, associate()
* function is expected to take care of IEEE 802.11 authentication,
* too.
*/
int (*authenticate)(void *priv,
struct wpa_driver_auth_params *params);
/**
* set_ap - Set Beacon and Probe Response information for AP mode
* @priv: Private driver interface data
* @params: Parameters to use in AP mode
*
* This function is used to configure Beacon template and/or extra IEs
* to add for Beacon and Probe Response frames for the driver in
* AP mode. The driver is responsible for building the full Beacon
* frame by concatenating the head part with TIM IE generated by the
* driver/firmware and finishing with the tail part. Depending on the
* driver architectue, this can be done either by using the full
* template or the set of additional IEs (e.g., WPS and P2P IE).
* Similarly, Probe Response processing depends on the driver design.
* If the driver (or firmware) takes care of replying to Probe Request
* frames, the extra IEs provided here needs to be added to the Probe
* Response frames.
*
* Returns: 0 on success, -1 on failure
*/
int (*set_ap)(void *priv, struct wpa_driver_ap_params *params);
/**
* set_acl - Set ACL in AP mode
* @priv: Private driver interface data
* @params: Parameters to configure ACL
* Returns: 0 on success, -1 on failure
*
* This is used only for the drivers which support MAC address ACL.
*/
int (*set_acl)(void *priv, struct hostapd_acl_params *params);
/**
* hapd_init - Initialize driver interface (hostapd only)
* @hapd: Pointer to hostapd context
* @params: Configuration for the driver wrapper
* Returns: Pointer to private data, %NULL on failure
*
* This function is used instead of init() or init2() when the driver
* wrapper is used with hostapd.
*/
void * (*hapd_init)(struct hostapd_data *hapd,
struct wpa_init_params *params);
/**
* hapd_deinit - Deinitialize driver interface (hostapd only)
* @priv: Private driver interface data from hapd_init()
*/
void (*hapd_deinit)(void *priv);
/**
* set_ieee8021x - Enable/disable IEEE 802.1X support (AP only)
* @priv: Private driver interface data
* @params: BSS parameters
* Returns: 0 on success, -1 on failure
*
* This is an optional function to configure the kernel driver to
* enable/disable IEEE 802.1X support and set WPA/WPA2 parameters. This
* can be left undefined (set to %NULL) if IEEE 802.1X support is
* always enabled and the driver uses set_ap() to set WPA/RSN IE
* for Beacon frames.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_ieee8021x)(void *priv, struct wpa_bss_params *params);
/**
* set_privacy - Enable/disable privacy (AP only)
* @priv: Private driver interface data
* @enabled: 1 = privacy enabled, 0 = disabled
* Returns: 0 on success, -1 on failure
*
* This is an optional function to configure privacy field in the
* kernel driver for Beacon frames. This can be left undefined (set to
* %NULL) if the driver uses the Beacon template from set_ap().
*
* DEPRECATED - use set_ap() instead
*/
int (*set_privacy)(void *priv, int enabled);
/**
* get_seqnum - Fetch the current TSC/packet number (AP only)
* @ifname: The interface name (main or virtual)
* @priv: Private driver interface data
* @addr: MAC address of the station or %NULL for group keys
* @idx: Key index
* @seq: Buffer for returning the latest used TSC/packet number
* Returns: 0 on success, -1 on failure
*
* This function is used to fetch the last used TSC/packet number for
* a TKIP, CCMP, GCMP, or BIP/IGTK key. It is mainly used with group
* keys, so there is no strict requirement on implementing support for
* unicast keys (i.e., addr != %NULL).
*/
int (*get_seqnum)(const char *ifname, void *priv, const u8 *addr,
int idx, u8 *seq);
/**
* flush - Flush all association stations (AP only)
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure
*
* This function requests the driver to disassociate all associated
* stations. This function does not need to be implemented if the
* driver does not process association frames internally.
*/
int (*flush)(void *priv);
/**
* set_generic_elem - Add IEs into Beacon/Probe Response frames (AP)
* @priv: Private driver interface data
* @elem: Information elements
* @elem_len: Length of the elem buffer in octets
* Returns: 0 on success, -1 on failure
*
* This is an optional function to add information elements in the
* kernel driver for Beacon and Probe Response frames. This can be left
* undefined (set to %NULL) if the driver uses the Beacon template from
* set_ap().
*
* DEPRECATED - use set_ap() instead
*/
int (*set_generic_elem)(void *priv, const u8 *elem, size_t elem_len);
/**
* read_sta_data - Fetch station data
* @priv: Private driver interface data
* @data: Buffer for returning station information
* @addr: MAC address of the station
* Returns: 0 on success, -1 on failure
*/
int (*read_sta_data)(void *priv, struct hostap_sta_driver_data *data,
const u8 *addr);
/**
* hapd_send_eapol - Send an EAPOL packet (AP only)
* @priv: private driver interface data
* @addr: Destination MAC address
* @data: EAPOL packet starting with IEEE 802.1X header
* @data_len: Length of the EAPOL packet in octets
* @encrypt: Whether the frame should be encrypted
* @own_addr: Source MAC address
* @flags: WPA_STA_* flags for the destination station
*
* Returns: 0 on success, -1 on failure
*/
int (*hapd_send_eapol)(void *priv, const u8 *addr, const u8 *data,
size_t data_len, int encrypt,
const u8 *own_addr, u32 flags);
/**
* sta_deauth - Deauthenticate a station (AP only)
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for the Deauthentication frame
* @addr: MAC address of the station to deauthenticate
* @reason: Reason code for the Deauthentiation frame
* Returns: 0 on success, -1 on failure
*
* This function requests a specific station to be deauthenticated and
* a Deauthentication frame to be sent to it.
*/
int (*sta_deauth)(void *priv, const u8 *own_addr, const u8 *addr,
int reason);
/**
* sta_disassoc - Disassociate a station (AP only)
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for the Disassociation frame
* @addr: MAC address of the station to disassociate
* @reason: Reason code for the Disassociation frame
* Returns: 0 on success, -1 on failure
*
* This function requests a specific station to be disassociated and
* a Disassociation frame to be sent to it.
*/
int (*sta_disassoc)(void *priv, const u8 *own_addr, const u8 *addr,
int reason);
/**
* sta_remove - Remove a station entry (AP only)
* @priv: Private driver interface data
* @addr: MAC address of the station to be removed
* Returns: 0 on success, -1 on failure
*/
int (*sta_remove)(void *priv, const u8 *addr);
/**
* hapd_get_ssid - Get the current SSID (AP only)
* @priv: Private driver interface data
* @buf: Buffer for returning the SSID
* @len: Maximum length of the buffer
* Returns: Length of the SSID on success, -1 on failure
*
* This function need not be implemented if the driver uses Beacon
* template from set_ap() and does not reply to Probe Request frames.
*/
int (*hapd_get_ssid)(void *priv, u8 *buf, int len);
/**
* hapd_set_ssid - Set SSID (AP only)
* @priv: Private driver interface data
* @buf: SSID
* @len: Length of the SSID in octets
* Returns: 0 on success, -1 on failure
*
* DEPRECATED - use set_ap() instead
*/
int (*hapd_set_ssid)(void *priv, const u8 *buf, int len);
/**
* hapd_set_countermeasures - Enable/disable TKIP countermeasures (AP)
* @priv: Private driver interface data
* @enabled: 1 = countermeasures enabled, 0 = disabled
* Returns: 0 on success, -1 on failure
*
* This need not be implemented if the driver does not take care of
* association processing.
*/
int (*hapd_set_countermeasures)(void *priv, int enabled);
/**
* sta_add - Add a station entry
* @priv: Private driver interface data
* @params: Station parameters
* Returns: 0 on success, -1 on failure
*
* This function is used to add or set (params->set 1) a station
* entry in the driver. Adding STA entries is used only if the driver
* does not take care of association processing.
*
* With drivers that don't support full AP client state, this function
* is used to add a station entry to the driver once the station has
* completed association.
*
* With TDLS, this function is used to add or set (params->set 1)
* TDLS peer entries (even with drivers that do not support full AP
* client state).
*/
int (*sta_add)(void *priv, struct hostapd_sta_add_params *params);
/**
* get_inact_sec - Get station inactivity duration (AP only)
* @priv: Private driver interface data
* @addr: Station address
* Returns: Number of seconds station has been inactive, -1 on failure
*/
int (*get_inact_sec)(void *priv, const u8 *addr);
/**
* sta_clear_stats - Clear station statistics (AP only)
* @priv: Private driver interface data
* @addr: Station address
* Returns: 0 on success, -1 on failure
*/
int (*sta_clear_stats)(void *priv, const u8 *addr);
/**
* set_freq - Set channel/frequency (AP only)
* @priv: Private driver interface data
* @freq: Channel parameters
* Returns: 0 on success, -1 on failure
*/
int (*set_freq)(void *priv, struct hostapd_freq_params *freq);
/**
* set_rts - Set RTS threshold
* @priv: Private driver interface data
* @rts: RTS threshold in octets
* Returns: 0 on success, -1 on failure
*/
int (*set_rts)(void *priv, int rts);
/**
* set_frag - Set fragmentation threshold
* @priv: Private driver interface data
* @frag: Fragmentation threshold in octets
* Returns: 0 on success, -1 on failure
*/
int (*set_frag)(void *priv, int frag);
/**
* sta_set_flags - Set station flags (AP only)
* @priv: Private driver interface data
* @addr: Station address
* @total_flags: Bitmap of all WPA_STA_* flags currently set
* @flags_or: Bitmap of WPA_STA_* flags to add
* @flags_and: Bitmap of WPA_STA_* flags to us as a mask
* Returns: 0 on success, -1 on failure
*/
int (*sta_set_flags)(void *priv, const u8 *addr,
unsigned int total_flags, unsigned int flags_or,
unsigned int flags_and);
/**
* set_tx_queue_params - Set TX queue parameters
* @priv: Private driver interface data
* @queue: Queue number (0 = VO, 1 = VI, 2 = BE, 3 = BK)
* @aifs: AIFS
* @cw_min: cwMin
* @cw_max: cwMax
* @burst_time: Maximum length for bursting in 0.1 msec units
*/
int (*set_tx_queue_params)(void *priv, int queue, int aifs, int cw_min,
int cw_max, int burst_time);
/**
* if_add - Add a virtual interface
* @priv: Private driver interface data
* @type: Interface type
* @ifname: Interface name for the new virtual interface
* @addr: Local address to use for the interface or %NULL to use the
* parent interface address
* @bss_ctx: BSS context for %WPA_IF_AP_BSS interfaces
* @drv_priv: Pointer for overwriting the driver context or %NULL if
* not allowed (applies only to %WPA_IF_AP_BSS type)
* @force_ifname: Buffer for returning an interface name that the
* driver ended up using if it differs from the requested ifname
* @if_addr: Buffer for returning the allocated interface address
* (this may differ from the requested addr if the driver cannot
* change interface address)
* @bridge: Bridge interface to use or %NULL if no bridge configured
* @use_existing: Whether to allow existing interface to be used
* @setup_ap: Whether to setup AP for %WPA_IF_AP_BSS interfaces
* Returns: 0 on success, -1 on failure
*/
int (*if_add)(void *priv, enum wpa_driver_if_type type,
const char *ifname, const u8 *addr, void *bss_ctx,
void **drv_priv, char *force_ifname, u8 *if_addr,
const char *bridge, int use_existing, int setup_ap);
/**
* if_remove - Remove a virtual interface
* @priv: Private driver interface data
* @type: Interface type
* @ifname: Interface name of the virtual interface to be removed
* Returns: 0 on success, -1 on failure
*/
int (*if_remove)(void *priv, enum wpa_driver_if_type type,
const char *ifname);
/**
* set_sta_vlan - Bind a station into a specific interface (AP only)
* @priv: Private driver interface data
* @ifname: Interface (main or virtual BSS or VLAN)
* @addr: MAC address of the associated station
* @vlan_id: VLAN ID
* Returns: 0 on success, -1 on failure
*
* This function is used to bind a station to a specific virtual
* interface. It is only used if when virtual interfaces are supported,
* e.g., to assign stations to different VLAN interfaces based on
* information from a RADIUS server. This allows separate broadcast
* domains to be used with a single BSS.
*/
int (*set_sta_vlan)(void *priv, const u8 *addr, const char *ifname,
int vlan_id);
/**
* commit - Optional commit changes handler (AP only)
* @priv: driver private data
* Returns: 0 on success, -1 on failure
*
* This optional handler function can be registered if the driver
* interface implementation needs to commit changes (e.g., by setting
* network interface up) at the end of initial configuration. If set,
* this handler will be called after initial setup has been completed.
*/
int (*commit)(void *priv);
/**
* send_ether - Send an ethernet packet (AP only)
* @priv: private driver interface data
* @dst: Destination MAC address
* @src: Source MAC address
* @proto: Ethertype
* @data: EAPOL packet starting with IEEE 802.1X header
* @data_len: Length of the EAPOL packet in octets
* Returns: 0 on success, -1 on failure
*/
int (*send_ether)(void *priv, const u8 *dst, const u8 *src, u16 proto,
const u8 *data, size_t data_len);
/**
* set_radius_acl_auth - Notification of RADIUS ACL change
* @priv: Private driver interface data
* @mac: MAC address of the station
* @accepted: Whether the station was accepted
* @session_timeout: Session timeout for the station
* Returns: 0 on success, -1 on failure
*/
int (*set_radius_acl_auth)(void *priv, const u8 *mac, int accepted,
u32 session_timeout);
/**
* set_radius_acl_expire - Notification of RADIUS ACL expiration
* @priv: Private driver interface data
* @mac: MAC address of the station
* Returns: 0 on success, -1 on failure
*/
int (*set_radius_acl_expire)(void *priv, const u8 *mac);
/**
* set_ap_wps_ie - Add WPS IE(s) into Beacon/Probe Response frames (AP)
* @priv: Private driver interface data
* @beacon: WPS IE(s) for Beacon frames or %NULL to remove extra IE(s)
* @proberesp: WPS IE(s) for Probe Response frames or %NULL to remove
* extra IE(s)
* @assocresp: WPS IE(s) for (Re)Association Response frames or %NULL
* to remove extra IE(s)
* Returns: 0 on success, -1 on failure
*
* This is an optional function to add WPS IE in the kernel driver for
* Beacon and Probe Response frames. This can be left undefined (set
* to %NULL) if the driver uses the Beacon template from set_ap()
* and does not process Probe Request frames. If the driver takes care
* of (Re)Association frame processing, the assocresp buffer includes
* WPS IE(s) that need to be added to (Re)Association Response frames
* whenever a (Re)Association Request frame indicated use of WPS.
*
* This will also be used to add P2P IE(s) into Beacon/Probe Response
* frames when operating as a GO. The driver is responsible for adding
* timing related attributes (e.g., NoA) in addition to the IEs
* included here by appending them after these buffers. This call is
* also used to provide Probe Response IEs for P2P Listen state
* operations for drivers that generate the Probe Response frames
* internally.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_ap_wps_ie)(void *priv, const struct wpabuf *beacon,
const struct wpabuf *proberesp,
const struct wpabuf *assocresp);
/**
* set_supp_port - Set IEEE 802.1X Supplicant Port status
* @priv: Private driver interface data
* @authorized: Whether the port is authorized
* Returns: 0 on success, -1 on failure
*/
int (*set_supp_port)(void *priv, int authorized);
/**
* set_wds_sta - Bind a station into a 4-address WDS (AP only)
* @priv: Private driver interface data
* @addr: MAC address of the associated station
* @aid: Association ID
* @val: 1 = bind to 4-address WDS; 0 = unbind
* @bridge_ifname: Bridge interface to use for the WDS station or %NULL
* to indicate that bridge is not to be used
* @ifname_wds: Buffer to return the interface name for the new WDS
* station or %NULL to indicate name is not returned.
* Returns: 0 on success, -1 on failure
*/
int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val,
const char *bridge_ifname, char *ifname_wds);
/**
* send_action - Transmit an Action frame
* @priv: Private driver interface data
* @freq: Frequency (in MHz) of the channel
* @wait: Time to wait off-channel for a response (in ms), or zero
* @dst: Destination MAC address (Address 1)
* @src: Source MAC address (Address 2)
* @bssid: BSSID (Address 3)
* @data: Frame body
* @data_len: data length in octets
@ @no_cck: Whether CCK rates must not be used to transmit this frame
* Returns: 0 on success, -1 on failure
*
* This command can be used to request the driver to transmit an action
* frame to the specified destination.
*
* If the %WPA_DRIVER_FLAGS_OFFCHANNEL_TX flag is set, the frame will
* be transmitted on the given channel and the device will wait for a
* response on that channel for the given wait time.
*
* If the flag is not set, the wait time will be ignored. In this case,
* if a remain-on-channel duration is in progress, the frame must be
* transmitted on that channel; alternatively the frame may be sent on
* the current operational channel (if in associated state in station
* mode or while operating as an AP.)
*/
int (*send_action)(void *priv, unsigned int freq, unsigned int wait,
const u8 *dst, const u8 *src, const u8 *bssid,
const u8 *data, size_t data_len, int no_cck);
/**
* send_action_cancel_wait - Cancel action frame TX wait
* @priv: Private driver interface data
*
* This command cancels the wait time associated with sending an action
* frame. It is only available when %WPA_DRIVER_FLAGS_OFFCHANNEL_TX is
* set in the driver flags.
*/
void (*send_action_cancel_wait)(void *priv);
/**
* remain_on_channel - Remain awake on a channel
* @priv: Private driver interface data
* @freq: Frequency (in MHz) of the channel
* @duration: Duration in milliseconds
* Returns: 0 on success, -1 on failure
*
* This command is used to request the driver to remain awake on the
* specified channel for the specified duration and report received
* Action frames with EVENT_RX_MGMT events. Optionally, received
* Probe Request frames may also be requested to be reported by calling
* probe_req_report(). These will be reported with EVENT_RX_PROBE_REQ.
*
* The driver may not be at the requested channel when this function
* returns, i.e., the return code is only indicating whether the
* request was accepted. The caller will need to wait until the
* EVENT_REMAIN_ON_CHANNEL event indicates that the driver has
* completed the channel change. This may take some time due to other
* need for the radio and the caller should be prepared to timing out
* its wait since there are no guarantees on when this request can be
* executed.
*/
int (*remain_on_channel)(void *priv, unsigned int freq,
unsigned int duration);
/**
* cancel_remain_on_channel - Cancel remain-on-channel operation
* @priv: Private driver interface data
*
* This command can be used to cancel a remain-on-channel operation
* before its originally requested duration has passed. This could be
* used, e.g., when remain_on_channel() is used to request extra time
* to receive a response to an Action frame and the response is
* received when there is still unneeded time remaining on the
* remain-on-channel operation.
*/
int (*cancel_remain_on_channel)(void *priv);
/**
* probe_req_report - Request Probe Request frames to be indicated
* @priv: Private driver interface data
* @report: Whether to report received Probe Request frames
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This command can be used to request the driver to indicate when
* Probe Request frames are received with EVENT_RX_PROBE_REQ events.
* Since this operation may require extra resources, e.g., due to less
* optimal hardware/firmware RX filtering, many drivers may disable
* Probe Request reporting at least in station mode. This command is
* used to notify the driver when the Probe Request frames need to be
* reported, e.g., during remain-on-channel operations.
*/
int (*probe_req_report)(void *priv, int report);
/**
* deinit_ap - Deinitialize AP mode
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable AP mode related
* configuration. If the interface was not dynamically added,
* change the driver mode to station mode to allow normal station
* operations like scanning to be completed.
*/
int (*deinit_ap)(void *priv);
/**
* deinit_p2p_cli - Deinitialize P2P client mode
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable P2P client mode. If the
* interface was not dynamically added, change the interface type back
* to station mode.
*/
int (*deinit_p2p_cli)(void *priv);
/**
* suspend - Notification on system suspend/hibernate event
* @priv: Private driver interface data
*/
void (*suspend)(void *priv);
/**
* resume - Notification on system resume/thaw event
* @priv: Private driver interface data
*/
void (*resume)(void *priv);
/**
* signal_monitor - Set signal monitoring parameters
* @priv: Private driver interface data
* @threshold: Threshold value for signal change events; 0 = disabled
* @hysteresis: Minimum change in signal strength before indicating a
* new event
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This function can be used to configure monitoring of signal strength
* with the current AP. Whenever signal strength drops below the
* %threshold value or increases above it, EVENT_SIGNAL_CHANGE event
* should be generated assuming the signal strength has changed at
* least %hysteresis from the previously indicated signal change event.
*/
int (*signal_monitor)(void *priv, int threshold, int hysteresis);
/**
* send_frame - Send IEEE 802.11 frame (testing use only)
* @priv: Private driver interface data
* @data: IEEE 802.11 frame with IEEE 802.11 header
* @data_len: Size of the frame
* @encrypt: Whether to encrypt the frame (if keys are set)
* Returns: 0 on success, -1 on failure
*
* This function is only used for debugging purposes and is not
* required to be implemented for normal operations.
*/
int (*send_frame)(void *priv, const u8 *data, size_t data_len,
int encrypt);
/**
* get_noa - Get current Notice of Absence attribute payload
* @priv: Private driver interface data
* @buf: Buffer for returning NoA
* @buf_len: Buffer length in octets
* Returns: Number of octets used in buf, 0 to indicate no NoA is being
* advertized, or -1 on failure
*
* This function is used to fetch the current Notice of Absence
* attribute value from GO.
*/
int (*get_noa)(void *priv, u8 *buf, size_t buf_len);
/**
* set_noa - Set Notice of Absence parameters for GO (testing)
* @priv: Private driver interface data
* @count: Count
* @start: Start time in ms from next TBTT
* @duration: Duration in ms
* Returns: 0 on success or -1 on failure
*
* This function is used to set Notice of Absence parameters for GO. It
* is used only for testing. To disable NoA, all parameters are set to
* 0.
*/
int (*set_noa)(void *priv, u8 count, int start, int duration);
/**
* set_p2p_powersave - Set P2P power save options
* @priv: Private driver interface data
* @legacy_ps: 0 = disable, 1 = enable, 2 = maximum PS, -1 = no change
* @opp_ps: 0 = disable, 1 = enable, -1 = no change
* @ctwindow: 0.. = change (msec), -1 = no change
* Returns: 0 on success or -1 on failure
*/
int (*set_p2p_powersave)(void *priv, int legacy_ps, int opp_ps,
int ctwindow);
/**
* ampdu - Enable/disable aggregation
* @priv: Private driver interface data
* @ampdu: 1/0 = enable/disable A-MPDU aggregation
* Returns: 0 on success or -1 on failure
*/
int (*ampdu)(void *priv, int ampdu);
/**
* get_radio_name - Get physical radio name for the device
* @priv: Private driver interface data
* Returns: Radio name or %NULL if not known
*
* The returned data must not be modified by the caller. It is assumed
* that any interface that has the same radio name as another is
* sharing the same physical radio. This information can be used to
* share scan results etc. information between the virtual interfaces
* to speed up various operations.
*/
const char * (*get_radio_name)(void *priv);
/**
* send_tdls_mgmt - for sending TDLS management packets
* @priv: private driver interface data
* @dst: Destination (peer) MAC address
* @action_code: TDLS action code for the mssage
* @dialog_token: Dialog Token to use in the message (if needed)
* @status_code: Status Code or Reason Code to use (if needed)
* @peer_capab: TDLS peer capability (TDLS_PEER_* bitfield)
* @initiator: Is the current end the TDLS link initiator
* @buf: TDLS IEs to add to the message
* @len: Length of buf in octets
* Returns: 0 on success, negative (<0) on failure
*
* This optional function can be used to send packet to driver which is
* responsible for receiving and sending all TDLS packets.
*/
int (*send_tdls_mgmt)(void *priv, const u8 *dst, u8 action_code,
u8 dialog_token, u16 status_code, u32 peer_capab,
int initiator, const u8 *buf, size_t len);
/**
* tdls_oper - Ask the driver to perform high-level TDLS operations
* @priv: Private driver interface data
* @oper: TDLS high-level operation. See %enum tdls_oper
* @peer: Destination (peer) MAC address
* Returns: 0 on success, negative (<0) on failure
*
* This optional function can be used to send high-level TDLS commands
* to the driver.
*/
int (*tdls_oper)(void *priv, enum tdls_oper oper, const u8 *peer);
/**
* wnm_oper - Notify driver of the WNM frame reception
* @priv: Private driver interface data
* @oper: WNM operation. See %enum wnm_oper
* @peer: Destination (peer) MAC address
* @buf: Buffer for the driver to fill in (for getting IE)
* @buf_len: Return the len of buf
* Returns: 0 on success, negative (<0) on failure
*/
int (*wnm_oper)(void *priv, enum wnm_oper oper, const u8 *peer,
u8 *buf, u16 *buf_len);
/**
* set_qos_map - Set QoS Map
* @priv: Private driver interface data
* @qos_map_set: QoS Map
* @qos_map_set_len: Length of QoS Map
*/
int (*set_qos_map)(void *priv, const u8 *qos_map_set,
u8 qos_map_set_len);
/**
* br_add_ip_neigh - Add a neigh to the bridge ip neigh table
* @priv: Private driver interface data
* @version: IP version of the IP address, 4 or 6
* @ipaddr: IP address for the neigh entry
* @prefixlen: IP address prefix length
* @addr: Corresponding MAC address
* Returns: 0 on success, negative (<0) on failure
*/
int (*br_add_ip_neigh)(void *priv, u8 version, const u8 *ipaddr,
int prefixlen, const u8 *addr);
/**
* br_delete_ip_neigh - Remove a neigh from the bridge ip neigh table
* @priv: Private driver interface data
* @version: IP version of the IP address, 4 or 6
* @ipaddr: IP address for the neigh entry
* Returns: 0 on success, negative (<0) on failure
*/
int (*br_delete_ip_neigh)(void *priv, u8 version, const u8 *ipaddr);
/**
* br_port_set_attr - Set a bridge port attribute
* @attr: Bridge port attribute to set
* @val: Value to be set
* Returns: 0 on success, negative (<0) on failure
*/
int (*br_port_set_attr)(void *priv, enum drv_br_port_attr attr,
unsigned int val);
/**
* br_port_set_attr - Set a bridge network parameter
* @param: Bridge parameter to set
* @val: Value to be set
* Returns: 0 on success, negative (<0) on failure
*/
int (*br_set_net_param)(void *priv, enum drv_br_net_param param,
unsigned int val);
/**
* set_wowlan - Set wake-on-wireless triggers
* @priv: Private driver interface data
* @triggers: wowlan triggers
*/
int (*set_wowlan)(void *priv, const struct wowlan_triggers *triggers);
/**
* signal_poll - Get current connection information
* @priv: Private driver interface data
* @signal_info: Connection info structure
*/
int (*signal_poll)(void *priv, struct wpa_signal_info *signal_info);
/**
* set_authmode - Set authentication algorithm(s) for static WEP
* @priv: Private driver interface data
* @authmode: 1=Open System, 2=Shared Key, 3=both
* Returns: 0 on success, -1 on failure
*
* This function can be used to set authentication algorithms for AP
* mode when static WEP is used. If the driver uses user space MLME/SME
* implementation, there is no need to implement this function.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_authmode)(void *priv, int authmode);
#ifdef ANDROID
/**
* driver_cmd - Execute driver-specific command
* @priv: Private driver interface data
* @cmd: Command to execute
* @buf: Return buffer
* @buf_len: Buffer length
* Returns: 0 on success, -1 on failure
*/
int (*driver_cmd)(void *priv, char *cmd, char *buf, size_t buf_len);
#endif /* ANDROID */
/**
* vendor_cmd - Execute vendor specific command
* @priv: Private driver interface data
* @vendor_id: Vendor id
* @subcmd: Vendor command id
* @data: Vendor command parameters (%NULL if no parameters)
* @data_len: Data length
* @buf: Return buffer (%NULL to ignore reply)
* Returns: 0 on success, negative (<0) on failure
*
* This function handles vendor specific commands that are passed to
* the driver/device. The command is identified by vendor id and
* command id. Parameters can be passed as argument to the command
* in the data buffer. Reply (if any) will be filled in the supplied
* return buffer.
*
* The exact driver behavior is driver interface and vendor specific. As
* an example, this will be converted to a vendor specific cfg80211
* command in case of the nl80211 driver interface.
*/
int (*vendor_cmd)(void *priv, unsigned int vendor_id,
unsigned int subcmd, const u8 *data, size_t data_len,
struct wpabuf *buf);
/**
* set_rekey_info - Set rekey information
* @priv: Private driver interface data
* @kek: Current KEK
* @kek_len: KEK length in octets
* @kck: Current KCK
* @kck_len: KCK length in octets
* @replay_ctr: Current EAPOL-Key Replay Counter
*
* This optional function can be used to provide information for the
* driver/firmware to process EAPOL-Key frames in Group Key Handshake
* while the host (including wpa_supplicant) is sleeping.
*/
void (*set_rekey_info)(void *priv, const u8 *kek, size_t kek_len,
const u8 *kck, size_t kck_len,
const u8 *replay_ctr);
/**
* sta_assoc - Station association indication
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for association frame
* @addr: MAC address of the station to associate
* @reassoc: flag to indicate re-association
* @status: association response status code
* @ie: assoc response ie buffer
* @len: ie buffer length
* Returns: 0 on success, -1 on failure
*
* This function indicates the driver to send (Re)Association
* Response frame to the station.
*/
int (*sta_assoc)(void *priv, const u8 *own_addr, const u8 *addr,
int reassoc, u16 status, const u8 *ie, size_t len);
/**
* sta_auth - Station authentication indication
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for authentication frame
* @addr: MAC address of the station to associate
* @seq: authentication sequence number
* @status: authentication response status code
* @ie: authentication frame ie buffer
* @len: ie buffer length
*
* This function indicates the driver to send Authentication frame
* to the station.
*/
int (*sta_auth)(void *priv, const u8 *own_addr, const u8 *addr,
u16 seq, u16 status, const u8 *ie, size_t len);
/**
* add_tspec - Add traffic stream
* @priv: Private driver interface data
* @addr: MAC address of the station to associate
* @tspec_ie: tspec ie buffer
* @tspec_ielen: tspec ie length
* Returns: 0 on success, -1 on failure
*
* This function adds the traffic steam for the station
* and fills the medium_time in tspec_ie.
*/
int (*add_tspec)(void *priv, const u8 *addr, u8 *tspec_ie,
size_t tspec_ielen);
/**
* add_sta_node - Add a station node in the driver
* @priv: Private driver interface data
* @addr: MAC address of the station to add
* @auth_alg: authentication algorithm used by the station
* Returns: 0 on success, -1 on failure
*
* This function adds the station node in the driver, when
* the station gets added by FT-over-DS.
*/
int (*add_sta_node)(void *priv, const u8 *addr, u16 auth_alg);
/**
* sched_scan - Request the driver to initiate scheduled scan
* @priv: Private driver interface data
* @params: Scan parameters
* Returns: 0 on success, -1 on failure
*
* This operation should be used for scheduled scan offload to
* the hardware. Every time scan results are available, the
* driver should report scan results event for wpa_supplicant
* which will eventually request the results with
* wpa_driver_get_scan_results2(). This operation is optional
* and if not provided or if it returns -1, we fall back to
* normal host-scheduled scans.
*/
int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params);
/**
* stop_sched_scan - Request the driver to stop a scheduled scan
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure
*
* This should cause the scheduled scan to be stopped and
* results should stop being sent. Must be supported if
* sched_scan is supported.
*/
int (*stop_sched_scan)(void *priv);
/**
* poll_client - Probe (null data or such) the given station
* @priv: Private driver interface data
* @own_addr: MAC address of sending interface
* @addr: MAC address of the station to probe
* @qos: Indicates whether station is QoS station
*
* This function is used to verify whether an associated station is
* still present. This function does not need to be implemented if the
* driver provides such inactivity polling mechanism.
*/
void (*poll_client)(void *priv, const u8 *own_addr,
const u8 *addr, int qos);
/**
* radio_disable - Disable/enable radio
* @priv: Private driver interface data
* @disabled: 1=disable 0=enable radio
* Returns: 0 on success, -1 on failure
*
* This optional command is for testing purposes. It can be used to
* disable the radio on a testbed device to simulate out-of-radio-range
* conditions.
*/
int (*radio_disable)(void *priv, int disabled);
/**
* switch_channel - Announce channel switch and migrate the GO to the
* given frequency
* @priv: Private driver interface data
* @settings: Settings for CSA period and new channel
* Returns: 0 on success, -1 on failure
*
* This function is used to move the GO to the legacy STA channel to
* avoid frequency conflict in single channel concurrency.
*/
int (*switch_channel)(void *priv, struct csa_settings *settings);
/**
* add_tx_ts - Add traffic stream
* @priv: Private driver interface data
* @tsid: Traffic stream ID
* @addr: Receiver address
* @user_prio: User priority of the traffic stream
* @admitted_time: Admitted time for this TS in units of
* 32 microsecond periods (per second).
* Returns: 0 on success, -1 on failure
*/
int (*add_tx_ts)(void *priv, u8 tsid, const u8 *addr, u8 user_prio,
u16 admitted_time);
/**
* del_tx_ts - Delete traffic stream
* @priv: Private driver interface data
* @tsid: Traffic stream ID
* @addr: Receiver address
* Returns: 0 on success, -1 on failure
*/
int (*del_tx_ts)(void *priv, u8 tsid, const u8 *addr);
/**
* Enable channel-switching with TDLS peer
* @priv: Private driver interface data
* @addr: MAC address of the TDLS peer
* @oper_class: Operating class of the switch channel
* @params: Channel specification
* Returns: 0 on success, -1 on failure
*
* The function indicates to driver that it can start switching to a
* different channel with a specified TDLS peer. The switching is
* assumed on until canceled with tdls_disable_channel_switch().
*/
int (*tdls_enable_channel_switch)(
void *priv, const u8 *addr, u8 oper_class,
const struct hostapd_freq_params *params);
/**
* Disable channel switching with TDLS peer
* @priv: Private driver interface data
* @addr: MAC address of the TDLS peer
* Returns: 0 on success, -1 on failure
*
* This function indicates to the driver that it should stop switching
* with a given TDLS peer.
*/
int (*tdls_disable_channel_switch)(void *priv, const u8 *addr);
/**
* start_dfs_cac - Listen for radar interference on the channel
* @priv: Private driver interface data
* @freq: Channel parameters
* Returns: 0 on success, -1 on failure
*/
int (*start_dfs_cac)(void *priv, struct hostapd_freq_params *freq);
/**
* stop_ap - Removes beacon from AP
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable AP mode related
* configuration. Unlike deinit_ap, it does not change to station
* mode.
*/
int (*stop_ap)(void *priv);
/**
* get_survey - Retrieve survey data
* @priv: Private driver interface data
* @freq: If set, survey data for the specified frequency is only
* being requested. If not set, all survey data is requested.
* Returns: 0 on success, -1 on failure
*
* Use this to retrieve:
*
* - the observed channel noise floor
* - the amount of time we have spent on the channel
* - the amount of time during which we have spent on the channel that
* the radio has determined the medium is busy and we cannot
* transmit
* - the amount of time we have spent receiving data
* - the amount of time we have spent transmitting data
*
* This data can be used for spectrum heuristics. One example is
* Automatic Channel Selection (ACS). The channel survey data is
* kept on a linked list on the channel data, one entry is added
* for each survey. The min_nf of the channel is updated for each
* survey.
*/
int (*get_survey)(void *priv, unsigned int freq);
/**
* status - Get driver interface status information
* @priv: Private driver interface data
* @buf: Buffer for printing tou the status information
* @buflen: Maximum length of the buffer
* Returns: Length of written status information or -1 on failure
*/
int (*status)(void *priv, char *buf, size_t buflen);
/**
* roaming - Set roaming policy for driver-based BSS selection
* @priv: Private driver interface data
* @allowed: Whether roaming within ESS is allowed
* @bssid: Forced BSSID if roaming is disabled or %NULL if not set
* Returns: Length of written status information or -1 on failure
*
* This optional callback can be used to update roaming policy from the
* associate() command (bssid being set there indicates that the driver
* should not roam before getting this roaming() call to allow roaming.
* If the driver does not indicate WPA_DRIVER_FLAGS_BSS_SELECTION
* capability, roaming policy is handled within wpa_supplicant and there
* is no need to implement or react to this callback.
*/
int (*roaming)(void *priv, int allowed, const u8 *bssid);
/**
* set_mac_addr - Set MAC address
* @priv: Private driver interface data
* @addr: MAC address to use or %NULL for setting back to permanent
* Returns: 0 on success, -1 on failure
*/
int (*set_mac_addr)(void *priv, const u8 *addr);
#ifdef CONFIG_MACSEC
int (*macsec_init)(void *priv, struct macsec_init_params *params);
int (*macsec_deinit)(void *priv);
/**
* macsec_get_capability - Inform MKA of this driver's capability
* @priv: Private driver interface data
* @cap: Driver's capability
* Returns: 0 on success, -1 on failure
*/
int (*macsec_get_capability)(void *priv, enum macsec_cap *cap);
/**
* enable_protect_frames - Set protect frames status
* @priv: Private driver interface data
* @enabled: TRUE = protect frames enabled
* FALSE = protect frames disabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*enable_protect_frames)(void *priv, Boolean enabled);
/**
* enable_encrypt - Set encryption status
* @priv: Private driver interface data
* @enabled: TRUE = encrypt outgoing traffic
* FALSE = integrity-only protection on outgoing traffic
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*enable_encrypt)(void *priv, Boolean enabled);
/**
* set_replay_protect - Set replay protect status and window size
* @priv: Private driver interface data
* @enabled: TRUE = replay protect enabled
* FALSE = replay protect disabled
* @window: replay window size, valid only when replay protect enabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_replay_protect)(void *priv, Boolean enabled, u32 window);
/**
* set_current_cipher_suite - Set current cipher suite
* @priv: Private driver interface data
* @cs: EUI64 identifier
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_current_cipher_suite)(void *priv, u64 cs);
/**
* enable_controlled_port - Set controlled port status
* @priv: Private driver interface data
* @enabled: TRUE = controlled port enabled
* FALSE = controlled port disabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*enable_controlled_port)(void *priv, Boolean enabled);
/**
* get_receive_lowest_pn - Get receive lowest pn
* @priv: Private driver interface data
* @sa: secure association
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_receive_lowest_pn)(void *priv, struct receive_sa *sa);
/**
* get_transmit_next_pn - Get transmit next pn
* @priv: Private driver interface data
* @sa: secure association
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_transmit_next_pn)(void *priv, struct transmit_sa *sa);
/**
* set_transmit_next_pn - Set transmit next pn
* @priv: Private driver interface data
* @sa: secure association
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_transmit_next_pn)(void *priv, struct transmit_sa *sa);
/**
* create_receive_sc - create secure channel for receiving
* @priv: Private driver interface data
* @sc: secure channel
* @conf_offset: confidentiality offset (0, 30, or 50)
* @validation: frame validation policy (0 = Disabled, 1 = Checked,
* 2 = Strict)
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*create_receive_sc)(void *priv, struct receive_sc *sc,
unsigned int conf_offset,
int validation);
/**
* delete_receive_sc - delete secure connection for receiving
* @priv: private driver interface data from init()
* @sc: secure channel
* Returns: 0 on success, -1 on failure
*/
int (*delete_receive_sc)(void *priv, struct receive_sc *sc);
/**
* create_receive_sa - create secure association for receive
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*create_receive_sa)(void *priv, struct receive_sa *sa);
/**
* delete_receive_sa - Delete secure association for receive
* @priv: Private driver interface data from init()
* @sa: Secure association
* Returns: 0 on success, -1 on failure
*/
int (*delete_receive_sa)(void *priv, struct receive_sa *sa);
/**
* enable_receive_sa - enable the SA for receive
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*enable_receive_sa)(void *priv, struct receive_sa *sa);
/**
* disable_receive_sa - disable SA for receive
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*disable_receive_sa)(void *priv, struct receive_sa *sa);
/**
* create_transmit_sc - create secure connection for transmit
* @priv: private driver interface data from init()
* @sc: secure channel
* @conf_offset: confidentiality offset (0, 30, or 50)
* Returns: 0 on success, -1 on failure
*/
int (*create_transmit_sc)(void *priv, struct transmit_sc *sc,
unsigned int conf_offset);
/**
* delete_transmit_sc - delete secure connection for transmit
* @priv: private driver interface data from init()
* @sc: secure channel
* Returns: 0 on success, -1 on failure
*/
int (*delete_transmit_sc)(void *priv, struct transmit_sc *sc);
/**
* create_transmit_sa - create secure association for transmit
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*create_transmit_sa)(void *priv, struct transmit_sa *sa);
/**
* delete_transmit_sa - Delete secure association for transmit
* @priv: Private driver interface data from init()
* @sa: Secure association
* Returns: 0 on success, -1 on failure
*/
int (*delete_transmit_sa)(void *priv, struct transmit_sa *sa);
/**
* enable_transmit_sa - enable SA for transmit
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*enable_transmit_sa)(void *priv, struct transmit_sa *sa);
/**
* disable_transmit_sa - disable SA for transmit
* @priv: private driver interface data from init()
* @sa: secure association
* Returns: 0 on success, -1 on failure
*/
int (*disable_transmit_sa)(void *priv, struct transmit_sa *sa);
#endif /* CONFIG_MACSEC */
/**
* init_mesh - Driver specific initialization for mesh
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure
*/
int (*init_mesh)(void *priv);
/**
* join_mesh - Join a mesh network
* @priv: Private driver interface data
* @params: Mesh configuration parameters
* Returns: 0 on success, -1 on failure
*/
int (*join_mesh)(void *priv,
struct wpa_driver_mesh_join_params *params);
/**
* leave_mesh - Leave a mesh network
* @priv: Private driver interface data
* Returns 0 on success, -1 on failure
*/
int (*leave_mesh)(void *priv);
/**
* do_acs - Automatically select channel
* @priv: Private driver interface data
* @params: Parameters for ACS
* Returns 0 on success, -1 on failure
*
* This command can be used to offload ACS to the driver if the driver
* indicates support for such offloading (WPA_DRIVER_FLAGS_ACS_OFFLOAD).
*/
int (*do_acs)(void *priv, struct drv_acs_params *params);
/**
* set_band - Notify driver of band selection
* @priv: Private driver interface data
* @band: The selected band(s)
* Returns 0 on success, -1 on failure
*/
int (*set_band)(void *priv, enum set_band band);
/**
* get_pref_freq_list - Get preferred frequency list for an interface
* @priv: Private driver interface data
* @if_type: Interface type
* @num: Number of channels
* @freq_list: Preferred channel frequency list encoded in MHz values
* Returns 0 on success, -1 on failure
*
* This command can be used to query the preferred frequency list from
* the driver specific to a particular interface type.
*/
int (*get_pref_freq_list)(void *priv, enum wpa_driver_if_type if_type,
unsigned int *num, unsigned int *freq_list);
/**
* set_prob_oper_freq - Indicate probable P2P operating channel
* @priv: Private driver interface data
* @freq: Channel frequency in MHz
* Returns 0 on success, -1 on failure
*
* This command can be used to inform the driver of the operating
* frequency that an ongoing P2P group formation is likely to come up
* on. Local device is assuming P2P Client role.
*/
int (*set_prob_oper_freq)(void *priv, unsigned int freq);
/**
* abort_scan - Request the driver to abort an ongoing scan
* @priv: Private driver interface data
* @scan_cookie: Cookie identifying the scan request. This is used only
* when the vendor interface QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN
* was used to trigger scan. Otherwise, 0 is used.
* Returns 0 on success, -1 on failure
*/
int (*abort_scan)(void *priv, u64 scan_cookie);
/**
* configure_data_frame_filters - Request to configure frame filters
* @priv: Private driver interface data
* @filter_flags: The type of frames to filter (bitfield of
* WPA_DATA_FRAME_FILTER_FLAG_*)
* Returns: 0 on success or -1 on failure
*/
int (*configure_data_frame_filters)(void *priv, u32 filter_flags);
/**
* get_ext_capab - Get extended capabilities for the specified interface
* @priv: Private driver interface data
* @type: Interface type for which to get extended capabilities
* @ext_capab: Extended capabilities fetched
* @ext_capab_mask: Extended capabilities mask
* @ext_capab_len: Length of the extended capabilities
* Returns: 0 on success or -1 on failure
*/
int (*get_ext_capab)(void *priv, enum wpa_driver_if_type type,
const u8 **ext_capab, const u8 **ext_capab_mask,
unsigned int *ext_capab_len);
/**
* p2p_lo_start - Start offloading P2P listen to device
* @priv: Private driver interface data
* @freq: Listening frequency (MHz) for P2P listen
* @period: Length of the listen operation in milliseconds
* @interval: Interval for running the listen operation in milliseconds
* @count: Number of times to run the listen operation
* @device_types: Device primary and secondary types
* @dev_types_len: Number of bytes for device_types
* @ies: P2P IE and WSC IE for Probe Response frames
* @ies_len: Length of ies in bytes
* Returns: 0 on success or -1 on failure
*/
int (*p2p_lo_start)(void *priv, unsigned int freq,
unsigned int period, unsigned int interval,
unsigned int count,
const u8 *device_types, size_t dev_types_len,
const u8 *ies, size_t ies_len);
/**
* p2p_lo_stop - Stop P2P listen offload
* @priv: Private driver interface data
* Returns: 0 on success or -1 on failure
*/
int (*p2p_lo_stop)(void *priv);
/**
* set_default_scan_ies - Set default scan IEs
* @priv: Private driver interface data
* @ies: Scan default IEs buffer
* @ies_len: Length of IEs in bytes
* Returns: 0 on success or -1 on failure
*
* The driver can use these by default when there are no scan IEs coming
* in the subsequent scan requests. Also in case of one or more of IEs
* given in set_default_scan_ies() are missing in the subsequent scan
* request, the driver should merge the missing scan IEs in the scan
* request from the IEs set by set_default_scan_ies() in the Probe
* Request frames sent.
*/
int (*set_default_scan_ies)(void *priv, const u8 *ies, size_t ies_len);
/**
* set_tdls_mode - Set TDLS trigger mode to the host driver
* @priv: Private driver interface data
* @tdls_external_control: Represents if TDLS external trigger control
* mode is enabled/disabled.
*
* This optional callback can be used to configure the TDLS external
* trigger control mode to the host driver.
*/
int (*set_tdls_mode)(void *priv, int tdls_external_control);
};
/**
* enum wpa_event_type - Event type for wpa_supplicant_event() calls
*/
enum wpa_event_type {
/**
* EVENT_ASSOC - Association completed
*
* This event needs to be delivered when the driver completes IEEE
* 802.11 association or reassociation successfully.
* wpa_driver_ops::get_bssid() is expected to provide the current BSSID
* after this event has been generated. In addition, optional
* EVENT_ASSOCINFO may be generated just before EVENT_ASSOC to provide
* more information about the association. If the driver interface gets
* both of these events at the same time, it can also include the
* assoc_info data in EVENT_ASSOC call.
*/
EVENT_ASSOC,
/**
* EVENT_DISASSOC - Association lost
*
* This event should be called when association is lost either due to
* receiving deauthenticate or disassociate frame from the AP or when
* sending either of these frames to the current AP. If the driver
* supports separate deauthentication event, EVENT_DISASSOC should only
* be used for disassociation and EVENT_DEAUTH for deauthentication.
* In AP mode, union wpa_event_data::disassoc_info is required.
*/
EVENT_DISASSOC,
/**
* EVENT_MICHAEL_MIC_FAILURE - Michael MIC (TKIP) detected
*
* This event must be delivered when a Michael MIC error is detected by
* the local driver. Additional data for event processing is
* provided with union wpa_event_data::michael_mic_failure. This
* information is used to request new encyption key and to initiate
* TKIP countermeasures if needed.
*/
EVENT_MICHAEL_MIC_FAILURE,
/**
* EVENT_SCAN_RESULTS - Scan results available
*
* This event must be called whenever scan results are available to be
* fetched with struct wpa_driver_ops::get_scan_results(). This event
* is expected to be used some time after struct wpa_driver_ops::scan()
* is called. If the driver provides an unsolicited event when the scan
* has been completed, this event can be used to trigger
* EVENT_SCAN_RESULTS call. If such event is not available from the
* driver, the driver wrapper code is expected to use a registered
* timeout to generate EVENT_SCAN_RESULTS call after the time that the
* scan is expected to be completed. Optional information about
* completed scan can be provided with union wpa_event_data::scan_info.
*/
EVENT_SCAN_RESULTS,
/**
* EVENT_ASSOCINFO - Report optional extra information for association
*
* This event can be used to report extra association information for
* EVENT_ASSOC processing. This extra information includes IEs from
* association frames and Beacon/Probe Response frames in union
* wpa_event_data::assoc_info. EVENT_ASSOCINFO must be send just before
* EVENT_ASSOC. Alternatively, the driver interface can include
* assoc_info data in the EVENT_ASSOC call if it has all the
* information available at the same point.
*/
EVENT_ASSOCINFO,
/**
* EVENT_INTERFACE_STATUS - Report interface status changes
*
* This optional event can be used to report changes in interface
* status (interface added/removed) using union
* wpa_event_data::interface_status. This can be used to trigger
* wpa_supplicant to stop and re-start processing for the interface,
* e.g., when a cardbus card is ejected/inserted.
*/
EVENT_INTERFACE_STATUS,
/**
* EVENT_PMKID_CANDIDATE - Report a candidate AP for pre-authentication
*
* This event can be used to inform wpa_supplicant about candidates for
* RSN (WPA2) pre-authentication. If wpa_supplicant is not responsible
* for scan request (ap_scan=2 mode), this event is required for
* pre-authentication. If wpa_supplicant is performing scan request
* (ap_scan=1), this event is optional since scan results can be used
* to add pre-authentication candidates. union
* wpa_event_data::pmkid_candidate is used to report the BSSID of the
* candidate and priority of the candidate, e.g., based on the signal
* strength, in order to try to pre-authenticate first with candidates
* that are most likely targets for re-association.
*
* EVENT_PMKID_CANDIDATE can be called whenever the driver has updates
* on the candidate list. In addition, it can be called for the current
* AP and APs that have existing PMKSA cache entries. wpa_supplicant
* will automatically skip pre-authentication in cases where a valid
* PMKSA exists. When more than one candidate exists, this event should
* be generated once for each candidate.
*
* Driver will be notified about successful pre-authentication with
* struct wpa_driver_ops::add_pmkid() calls.
*/
EVENT_PMKID_CANDIDATE,
/**
* EVENT_STKSTART - Request STK handshake (MLME-STKSTART.request)
*
* This event can be used to inform wpa_supplicant about desire to set
* up secure direct link connection between two stations as defined in
* IEEE 802.11e with a new PeerKey mechanism that replaced the original
* STAKey negotiation. The caller will need to set peer address for the
* event.
*/
EVENT_STKSTART,
/**
* EVENT_TDLS - Request TDLS operation
*
* This event can be used to request a TDLS operation to be performed.
*/
EVENT_TDLS,
/**
* EVENT_FT_RESPONSE - Report FT (IEEE 802.11r) response IEs
*
* The driver is expected to report the received FT IEs from
* FT authentication sequence from the AP. The FT IEs are included in
* the extra information in union wpa_event_data::ft_ies.
*/
EVENT_FT_RESPONSE,
/**
* EVENT_IBSS_RSN_START - Request RSN authentication in IBSS
*
* The driver can use this event to inform wpa_supplicant about a STA
* in an IBSS with which protected frames could be exchanged. This
* event starts RSN authentication with the other STA to authenticate
* the STA and set up encryption keys with it.
*/
EVENT_IBSS_RSN_START,
/**
* EVENT_AUTH - Authentication result
*
* This event should be called when authentication attempt has been
* completed. This is only used if the driver supports separate
* authentication step (struct wpa_driver_ops::authenticate).
* Information about authentication result is included in
* union wpa_event_data::auth.
*/
EVENT_AUTH,
/**
* EVENT_DEAUTH - Authentication lost
*
* This event should be called when authentication is lost either due
* to receiving deauthenticate frame from the AP or when sending that
* frame to the current AP.
* In AP mode, union wpa_event_data::deauth_info is required.
*/
EVENT_DEAUTH,
/**
* EVENT_ASSOC_REJECT - Association rejected
*
* This event should be called when (re)association attempt has been
* rejected by the AP. Information about the association response is
* included in union wpa_event_data::assoc_reject.
*/
EVENT_ASSOC_REJECT,
/**
* EVENT_AUTH_TIMED_OUT - Authentication timed out
*/
EVENT_AUTH_TIMED_OUT,
/**
* EVENT_ASSOC_TIMED_OUT - Association timed out
*/
EVENT_ASSOC_TIMED_OUT,
/**
* EVENT_WPS_BUTTON_PUSHED - Report hardware push button press for WPS
*/
EVENT_WPS_BUTTON_PUSHED,
/**
* EVENT_TX_STATUS - Report TX status
*/
EVENT_TX_STATUS,
/**
* EVENT_RX_FROM_UNKNOWN - Report RX from unknown STA
*/
EVENT_RX_FROM_UNKNOWN,
/**
* EVENT_RX_MGMT - Report RX of a management frame
*/
EVENT_RX_MGMT,
/**
* EVENT_REMAIN_ON_CHANNEL - Remain-on-channel duration started
*
* This event is used to indicate when the driver has started the
* requested remain-on-channel duration. Information about the
* operation is included in union wpa_event_data::remain_on_channel.
*/
EVENT_REMAIN_ON_CHANNEL,
/**
* EVENT_CANCEL_REMAIN_ON_CHANNEL - Remain-on-channel timed out
*
* This event is used to indicate when the driver has completed
* remain-on-channel duration, i.e., may noot be available on the
* requested channel anymore. Information about the
* operation is included in union wpa_event_data::remain_on_channel.
*/
EVENT_CANCEL_REMAIN_ON_CHANNEL,
/**
* EVENT_RX_PROBE_REQ - Indicate received Probe Request frame
*
* This event is used to indicate when a Probe Request frame has been
* received. Information about the received frame is included in
* union wpa_event_data::rx_probe_req. The driver is required to report
* these events only after successfully completed probe_req_report()
* commands to request the events (i.e., report parameter is non-zero)
* in station mode. In AP mode, Probe Request frames should always be
* reported.
*/
EVENT_RX_PROBE_REQ,
/**
* EVENT_NEW_STA - New wired device noticed
*
* This event is used to indicate that a new device has been detected
* in a network that does not use association-like functionality (i.e.,
* mainly wired Ethernet). This can be used to start EAPOL
* authenticator when receiving a frame from a device. The address of
* the device is included in union wpa_event_data::new_sta.
*/
EVENT_NEW_STA,
/**
* EVENT_EAPOL_RX - Report received EAPOL frame
*
* When in AP mode with hostapd, this event is required to be used to
* deliver the receive EAPOL frames from the driver.
*/
EVENT_EAPOL_RX,
/**
* EVENT_SIGNAL_CHANGE - Indicate change in signal strength
*
* This event is used to indicate changes in the signal strength
* observed in frames received from the current AP if signal strength
* monitoring has been enabled with signal_monitor().
*/
EVENT_SIGNAL_CHANGE,
/**
* EVENT_INTERFACE_ENABLED - Notify that interface was enabled
*
* This event is used to indicate that the interface was enabled after
* having been previously disabled, e.g., due to rfkill.
*/
EVENT_INTERFACE_ENABLED,
/**
* EVENT_INTERFACE_DISABLED - Notify that interface was disabled
*
* This event is used to indicate that the interface was disabled,
* e.g., due to rfkill.
*/
EVENT_INTERFACE_DISABLED,
/**
* EVENT_CHANNEL_LIST_CHANGED - Channel list changed
*
* This event is used to indicate that the channel list has changed,
* e.g., because of a regulatory domain change triggered by scan
* results including an AP advertising a country code.
*/
EVENT_CHANNEL_LIST_CHANGED,
/**
* EVENT_INTERFACE_UNAVAILABLE - Notify that interface is unavailable
*
* This event is used to indicate that the driver cannot maintain this
* interface in its operation mode anymore. The most likely use for
* this is to indicate that AP mode operation is not available due to
* operating channel would need to be changed to a DFS channel when
* the driver does not support radar detection and another virtual
* interfaces caused the operating channel to change. Other similar
* resource conflicts could also trigger this for station mode
* interfaces. This event can be propagated when channel switching
* fails.
*/
EVENT_INTERFACE_UNAVAILABLE,
/**
* EVENT_BEST_CHANNEL
*
* Driver generates this event whenever it detects a better channel
* (e.g., based on RSSI or channel use). This information can be used
* to improve channel selection for a new AP/P2P group.
*/
EVENT_BEST_CHANNEL,
/**
* EVENT_UNPROT_DEAUTH - Unprotected Deauthentication frame received
*
* This event should be called when a Deauthentication frame is dropped
* due to it not being protected (MFP/IEEE 802.11w).
* union wpa_event_data::unprot_deauth is required to provide more
* details of the frame.
*/
EVENT_UNPROT_DEAUTH,
/**
* EVENT_UNPROT_DISASSOC - Unprotected Disassociation frame received
*
* This event should be called when a Disassociation frame is dropped
* due to it not being protected (MFP/IEEE 802.11w).
* union wpa_event_data::unprot_disassoc is required to provide more
* details of the frame.
*/
EVENT_UNPROT_DISASSOC,
/**
* EVENT_STATION_LOW_ACK
*
* Driver generates this event whenever it detected that a particular
* station was lost. Detection can be through massive transmission
* failures for example.
*/
EVENT_STATION_LOW_ACK,
/**
* EVENT_IBSS_PEER_LOST - IBSS peer not reachable anymore
*/
EVENT_IBSS_PEER_LOST,
/**
* EVENT_DRIVER_GTK_REKEY - Device/driver did GTK rekey
*
* This event carries the new replay counter to notify wpa_supplicant
* of the current EAPOL-Key Replay Counter in case the driver/firmware
* completed Group Key Handshake while the host (including
* wpa_supplicant was sleeping).
*/
EVENT_DRIVER_GTK_REKEY,
/**
* EVENT_SCHED_SCAN_STOPPED - Scheduled scan was stopped
*/
EVENT_SCHED_SCAN_STOPPED,
/**
* EVENT_DRIVER_CLIENT_POLL_OK - Station responded to poll
*
* This event indicates that the station responded to the poll
* initiated with @poll_client.
*/
EVENT_DRIVER_CLIENT_POLL_OK,
/**
* EVENT_EAPOL_TX_STATUS - notify of EAPOL TX status
*/
EVENT_EAPOL_TX_STATUS,
/**
* EVENT_CH_SWITCH - AP or GO decided to switch channels
*
* Described in wpa_event_data.ch_switch
* */
EVENT_CH_SWITCH,
/**
* EVENT_WNM - Request WNM operation
*
* This event can be used to request a WNM operation to be performed.
*/
EVENT_WNM,
/**
* EVENT_CONNECT_FAILED_REASON - Connection failure reason in AP mode
*
* This event indicates that the driver reported a connection failure
* with the specified client (for example, max client reached, etc.) in
* AP mode.
*/
EVENT_CONNECT_FAILED_REASON,
/**
* EVENT_DFS_RADAR_DETECTED - Notify of radar detection
*
* A radar has been detected on the supplied frequency, hostapd should
* react accordingly (e.g., change channel).
*/
EVENT_DFS_RADAR_DETECTED,
/**
* EVENT_DFS_CAC_FINISHED - Notify that channel availability check has been completed
*
* After a successful CAC, the channel can be marked clear and used.
*/
EVENT_DFS_CAC_FINISHED,
/**
* EVENT_DFS_CAC_ABORTED - Notify that channel availability check has been aborted
*
* The CAC was not successful, and the channel remains in the previous
* state. This may happen due to a radar being detected or other
* external influences.
*/
EVENT_DFS_CAC_ABORTED,
/**
* EVENT_DFS_NOP_FINISHED - Notify that non-occupancy period is over
*
* The channel which was previously unavailable is now available again.
*/
EVENT_DFS_NOP_FINISHED,
/**
* EVENT_SURVEY - Received survey data
*
* This event gets triggered when a driver query is issued for survey
* data and the requested data becomes available. The returned data is
* stored in struct survey_results. The results provide at most one
* survey entry for each frequency and at minimum will provide one
* survey entry for one frequency. The survey data can be os_malloc()'d
* and then os_free()'d, so the event callback must only copy data.
*/
EVENT_SURVEY,
/**
* EVENT_SCAN_STARTED - Scan started
*
* This indicates that driver has started a scan operation either based
* on a request from wpa_supplicant/hostapd or from another application.
* EVENT_SCAN_RESULTS is used to indicate when the scan has been
* completed (either successfully or by getting cancelled).
*/
EVENT_SCAN_STARTED,
/**
* EVENT_AVOID_FREQUENCIES - Received avoid frequency range
*
* This event indicates a set of frequency ranges that should be avoided
* to reduce issues due to interference or internal co-existence
* information in the driver.
*/
EVENT_AVOID_FREQUENCIES,
/**
* EVENT_NEW_PEER_CANDIDATE - new (unknown) mesh peer notification
*/
EVENT_NEW_PEER_CANDIDATE,
/**
* EVENT_ACS_CHANNEL_SELECTED - Received selected channels by ACS
*
* Indicates a pair of primary and secondary channels chosen by ACS
* in device.
*/
EVENT_ACS_CHANNEL_SELECTED,
/**
* EVENT_DFS_CAC_STARTED - Notify that channel availability check has
* been started.
*
* This event indicates that channel availability check has been started
* on a DFS frequency by a driver that supports DFS Offload.
*/
EVENT_DFS_CAC_STARTED,
/**
* EVENT_P2P_LO_STOP - Notify that P2P listen offload is stopped
*/
EVENT_P2P_LO_STOP,
};
/**
* struct freq_survey - Channel survey info
*
* @ifidx: Interface index in which this survey was observed
* @freq: Center of frequency of the surveyed channel
* @nf: Channel noise floor in dBm
* @channel_time: Amount of time in ms the radio spent on the channel
* @channel_time_busy: Amount of time in ms the radio detected some signal
* that indicated to the radio the channel was not clear
* @channel_time_rx: Amount of time the radio spent receiving data
* @channel_time_tx: Amount of time the radio spent transmitting data
* @filled: bitmask indicating which fields have been reported, see
* SURVEY_HAS_* defines.
* @list: Internal list pointers
*/
struct freq_survey {
u32 ifidx;
unsigned int freq;
s8 nf;
u64 channel_time;
u64 channel_time_busy;
u64 channel_time_rx;
u64 channel_time_tx;
unsigned int filled;
struct dl_list list;
};
#define SURVEY_HAS_NF BIT(0)
#define SURVEY_HAS_CHAN_TIME BIT(1)
#define SURVEY_HAS_CHAN_TIME_BUSY BIT(2)
#define SURVEY_HAS_CHAN_TIME_RX BIT(3)
#define SURVEY_HAS_CHAN_TIME_TX BIT(4)
/**
* union wpa_event_data - Additional data for wpa_supplicant_event() calls
*/
union wpa_event_data {
/**
* struct assoc_info - Data for EVENT_ASSOC and EVENT_ASSOCINFO events
*
* This structure is optional for EVENT_ASSOC calls and required for
* EVENT_ASSOCINFO calls. By using EVENT_ASSOC with this data, the
* driver interface does not need to generate separate EVENT_ASSOCINFO
* calls.
*/
struct assoc_info {
/**
* reassoc - Flag to indicate association or reassociation
*/
int reassoc;
/**
* req_ies - (Re)Association Request IEs
*
* If the driver generates WPA/RSN IE, this event data must be
* returned for WPA handshake to have needed information. If
* wpa_supplicant-generated WPA/RSN IE is used, this
* information event is optional.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *req_ies;
/**
* req_ies_len - Length of req_ies in bytes
*/
size_t req_ies_len;
/**
* resp_ies - (Re)Association Response IEs
*
* Optional association data from the driver. This data is not
* required WPA, but may be useful for some protocols and as
* such, should be reported if this is available to the driver
* interface.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *resp_ies;
/**
* resp_ies_len - Length of resp_ies in bytes
*/
size_t resp_ies_len;
/**
* resp_frame - (Re)Association Response frame
*/
const u8 *resp_frame;
/**
* resp_frame_len - (Re)Association Response frame length
*/
size_t resp_frame_len;
/**
* beacon_ies - Beacon or Probe Response IEs
*
* Optional Beacon/ProbeResp data: IEs included in Beacon or
* Probe Response frames from the current AP (i.e., the one
* that the client just associated with). This information is
* used to update WPA/RSN IE for the AP. If this field is not
* set, the results from previous scan will be used. If no
* data for the new AP is found, scan results will be requested
* again (without scan request). At this point, the driver is
* expected to provide WPA/RSN IE for the AP (if WPA/WPA2 is
* used).
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *beacon_ies;
/**
* beacon_ies_len - Length of beacon_ies */
size_t beacon_ies_len;
/**
* freq - Frequency of the operational channel in MHz
*/
unsigned int freq;
/**
* wmm_params - WMM parameters used in this association.
*/
struct wmm_params wmm_params;
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
/**
* The following is the key management offload information
* @authorized
* @key_replay_ctr
* @key_replay_ctr_len
* @ptk_kck
* @ptk_kek_len
* @ptk_kek
* @ptk_kek_len
*/
/**
* authorized - Status of key management offload,
* 1 = successful
*/
int authorized;
/**
* key_replay_ctr - Key replay counter value last used
* in a valid EAPOL-Key frame
*/
const u8 *key_replay_ctr;
/**
* key_replay_ctr_len - The length of key_replay_ctr
*/
size_t key_replay_ctr_len;
/**
* ptk_kck - The derived PTK KCK
*/
const u8 *ptk_kck;
/**
* ptk_kek_len - The length of ptk_kck
*/
size_t ptk_kck_len;
/**
* ptk_kek - The derived PTK KEK
*/
const u8 *ptk_kek;
/**
* ptk_kek_len - The length of ptk_kek
*/
size_t ptk_kek_len;
/**
* subnet_status - The subnet status:
* 0 = unknown, 1 = unchanged, 2 = changed
*/
u8 subnet_status;
} assoc_info;
/**
* struct disassoc_info - Data for EVENT_DISASSOC events
*/
struct disassoc_info {
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
/**
* reason_code - Reason Code (host byte order) used in
* Deauthentication frame
*/
u16 reason_code;
/**
* ie - Optional IE(s) in Disassociation frame
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* locally_generated - Whether the frame was locally generated
*/
int locally_generated;
} disassoc_info;
/**
* struct deauth_info - Data for EVENT_DEAUTH events
*/
struct deauth_info {
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
/**
* reason_code - Reason Code (host byte order) used in
* Deauthentication frame
*/
u16 reason_code;
/**
* ie - Optional IE(s) in Deauthentication frame
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* locally_generated - Whether the frame was locally generated
*/
int locally_generated;
} deauth_info;
/**
* struct michael_mic_failure - Data for EVENT_MICHAEL_MIC_FAILURE
*/
struct michael_mic_failure {
int unicast;
const u8 *src;
} michael_mic_failure;
/**
* struct interface_status - Data for EVENT_INTERFACE_STATUS
*/
struct interface_status {
unsigned int ifindex;
char ifname[100];
enum {
EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED
} ievent;
} interface_status;
/**
* struct pmkid_candidate - Data for EVENT_PMKID_CANDIDATE
*/
struct pmkid_candidate {
/** BSSID of the PMKID candidate */
u8 bssid[ETH_ALEN];
/** Smaller the index, higher the priority */
int index;
/** Whether RSN IE includes pre-authenticate flag */
int preauth;
} pmkid_candidate;
/**
* struct stkstart - Data for EVENT_STKSTART
*/
struct stkstart {
u8 peer[ETH_ALEN];
} stkstart;
/**
* struct tdls - Data for EVENT_TDLS
*/
struct tdls {
u8 peer[ETH_ALEN];
enum {
TDLS_REQUEST_SETUP,
TDLS_REQUEST_TEARDOWN,
TDLS_REQUEST_DISCOVER,
} oper;
u16 reason_code; /* for teardown */
} tdls;
/**
* struct wnm - Data for EVENT_WNM
*/
struct wnm {
u8 addr[ETH_ALEN];
enum {
WNM_OPER_SLEEP,
} oper;
enum {
WNM_SLEEP_ENTER,
WNM_SLEEP_EXIT
} sleep_action;
int sleep_intval;
u16 reason_code;
u8 *buf;
u16 buf_len;
} wnm;
/**
* struct ft_ies - FT information elements (EVENT_FT_RESPONSE)
*
* During FT (IEEE 802.11r) authentication sequence, the driver is
* expected to use this event to report received FT IEs (MDIE, FTIE,
* RSN IE, TIE, possible resource request) to the supplicant. The FT
* IEs for the next message will be delivered through the
* struct wpa_driver_ops::update_ft_ies() callback.
*/
struct ft_ies {
const u8 *ies;
size_t ies_len;
int ft_action;
u8 target_ap[ETH_ALEN];
/** Optional IE(s), e.g., WMM TSPEC(s), for RIC-Request */
const u8 *ric_ies;
/** Length of ric_ies buffer in octets */
size_t ric_ies_len;
} ft_ies;
/**
* struct ibss_rsn_start - Data for EVENT_IBSS_RSN_START
*/
struct ibss_rsn_start {
u8 peer[ETH_ALEN];
} ibss_rsn_start;
/**
* struct auth_info - Data for EVENT_AUTH events
*/
struct auth_info {
u8 peer[ETH_ALEN];
u8 bssid[ETH_ALEN];
u16 auth_type;
u16 auth_transaction;
u16 status_code;
const u8 *ies;
size_t ies_len;
} auth;
/**
* struct assoc_reject - Data for EVENT_ASSOC_REJECT events
*/
struct assoc_reject {
/**
* bssid - BSSID of the AP that rejected association
*/
const u8 *bssid;
/**
* resp_ies - (Re)Association Response IEs
*
* Optional association data from the driver. This data is not
* required WPA, but may be useful for some protocols and as
* such, should be reported if this is available to the driver
* interface.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *resp_ies;
/**
* resp_ies_len - Length of resp_ies in bytes
*/
size_t resp_ies_len;
/**
* status_code - Status Code from (Re)association Response
*/
u16 status_code;
/**
* timed_out - Whether failure is due to timeout (etc.) rather
* than explicit rejection response from the AP.
*/
int timed_out;
} assoc_reject;
struct timeout_event {
u8 addr[ETH_ALEN];
} timeout_event;
/**
* struct tx_status - Data for EVENT_TX_STATUS events
*/
struct tx_status {
u16 type;
u16 stype;
const u8 *dst;
const u8 *data;
size_t data_len;
int ack;
} tx_status;
/**
* struct rx_from_unknown - Data for EVENT_RX_FROM_UNKNOWN events
*/
struct rx_from_unknown {
const u8 *bssid;
const u8 *addr;
int wds;
} rx_from_unknown;
/**
* struct rx_mgmt - Data for EVENT_RX_MGMT events
*/
struct rx_mgmt {
const u8 *frame;
size_t frame_len;
u32 datarate;
/**
* drv_priv - Pointer to store driver private BSS information
*
* If not set to NULL, this is used for comparison with
* hostapd_data->drv_priv to determine which BSS should process
* the frame.
*/
void *drv_priv;
/**
* freq - Frequency (in MHz) on which the frame was received
*/
int freq;
/**
* ssi_signal - Signal strength in dBm (or 0 if not available)
*/
int ssi_signal;
} rx_mgmt;
/**
* struct remain_on_channel - Data for EVENT_REMAIN_ON_CHANNEL events
*
* This is also used with EVENT_CANCEL_REMAIN_ON_CHANNEL events.
*/
struct remain_on_channel {
/**
* freq - Channel frequency in MHz
*/
unsigned int freq;
/**
* duration - Duration to remain on the channel in milliseconds
*/
unsigned int duration;
} remain_on_channel;
/**
* struct scan_info - Optional data for EVENT_SCAN_RESULTS events
* @aborted: Whether the scan was aborted
* @freqs: Scanned frequencies in MHz (%NULL = all channels scanned)
* @num_freqs: Number of entries in freqs array
* @ssids: Scanned SSIDs (%NULL or zero-length SSID indicates wildcard
* SSID)
* @num_ssids: Number of entries in ssids array
* @external_scan: Whether the scan info is for an external scan
* @nl_scan_event: 1 if the source of this scan event is a normal scan,
* 0 if the source of the scan event is a vendor scan
* @scan_start_tsf: Time when the scan started in terms of TSF of the
* BSS that the interface that requested the scan is connected to
* (if available).
* @scan_start_tsf_bssid: The BSSID according to which %scan_start_tsf
* is set.
*/
struct scan_info {
int aborted;
const int *freqs;
size_t num_freqs;
struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS];
size_t num_ssids;
int external_scan;
int nl_scan_event;
u64 scan_start_tsf;
u8 scan_start_tsf_bssid[ETH_ALEN];
} scan_info;
/**
* struct rx_probe_req - Data for EVENT_RX_PROBE_REQ events
*/
struct rx_probe_req {
/**
* sa - Source address of the received Probe Request frame
*/
const u8 *sa;
/**
* da - Destination address of the received Probe Request frame
* or %NULL if not available
*/
const u8 *da;
/**
* bssid - BSSID of the received Probe Request frame or %NULL
* if not available
*/
const u8 *bssid;
/**
* ie - IEs from the Probe Request body
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* signal - signal strength in dBm (or 0 if not available)
*/
int ssi_signal;
} rx_probe_req;
/**
* struct new_sta - Data for EVENT_NEW_STA events
*/
struct new_sta {
const u8 *addr;
} new_sta;
/**
* struct eapol_rx - Data for EVENT_EAPOL_RX events
*/
struct eapol_rx {
const u8 *src;
const u8 *data;
size_t data_len;
} eapol_rx;
/**
* signal_change - Data for EVENT_SIGNAL_CHANGE events
*/
struct wpa_signal_info signal_change;
/**
* struct best_channel - Data for EVENT_BEST_CHANNEL events
* @freq_24: Best 2.4 GHz band channel frequency in MHz
* @freq_5: Best 5 GHz band channel frequency in MHz
* @freq_overall: Best channel frequency in MHz
*
* 0 can be used to indicate no preference in either band.
*/
struct best_channel {
int freq_24;
int freq_5;
int freq_overall;
} best_chan;
struct unprot_deauth {
const u8 *sa;
const u8 *da;
u16 reason_code;
} unprot_deauth;
struct unprot_disassoc {
const u8 *sa;
const u8 *da;
u16 reason_code;
} unprot_disassoc;
/**
* struct low_ack - Data for EVENT_STATION_LOW_ACK events
* @addr: station address
*/
struct low_ack {
u8 addr[ETH_ALEN];
} low_ack;
/**
* struct ibss_peer_lost - Data for EVENT_IBSS_PEER_LOST
*/
struct ibss_peer_lost {
u8 peer[ETH_ALEN];
} ibss_peer_lost;
/**
* struct driver_gtk_rekey - Data for EVENT_DRIVER_GTK_REKEY
*/
struct driver_gtk_rekey {
const u8 *bssid;
const u8 *replay_ctr;
} driver_gtk_rekey;
/**
* struct client_poll - Data for EVENT_DRIVER_CLIENT_POLL_OK events
* @addr: station address
*/
struct client_poll {
u8 addr[ETH_ALEN];
} client_poll;
/**
* struct eapol_tx_status
* @dst: Original destination
* @data: Data starting with IEEE 802.1X header (!)
* @data_len: Length of data
* @ack: Indicates ack or lost frame
*
* This corresponds to hapd_send_eapol if the frame sent
* there isn't just reported as EVENT_TX_STATUS.
*/
struct eapol_tx_status {
const u8 *dst;
const u8 *data;
int data_len;
int ack;
} eapol_tx_status;
/**
* struct ch_switch
* @freq: Frequency of new channel in MHz
* @ht_enabled: Whether this is an HT channel
* @ch_offset: Secondary channel offset
* @ch_width: Channel width
* @cf1: Center frequency 1
* @cf2: Center frequency 2
*/
struct ch_switch {
int freq;
int ht_enabled;
int ch_offset;
enum chan_width ch_width;
int cf1;
int cf2;
} ch_switch;
/**
* struct connect_failed - Data for EVENT_CONNECT_FAILED_REASON
* @addr: Remote client address
* @code: Reason code for connection failure
*/
struct connect_failed_reason {
u8 addr[ETH_ALEN];
enum {
MAX_CLIENT_REACHED,
BLOCKED_CLIENT
} code;
} connect_failed_reason;
/**
* struct dfs_event - Data for radar detected events
* @freq: Frequency of the channel in MHz
*/
struct dfs_event {
int freq;
int ht_enabled;
int chan_offset;
enum chan_width chan_width;
int cf1;
int cf2;
} dfs_event;
/**
* survey_results - Survey result data for EVENT_SURVEY
* @freq_filter: Requested frequency survey filter, 0 if request
* was for all survey data
* @survey_list: Linked list of survey data (struct freq_survey)
*/
struct survey_results {
unsigned int freq_filter;
struct dl_list survey_list; /* struct freq_survey */
} survey_results;
/**
* channel_list_changed - Data for EVENT_CHANNEL_LIST_CHANGED
* @initiator: Initiator of the regulatory change
* @type: Regulatory change type
* @alpha2: Country code (or "" if not available)
*/
struct channel_list_changed {
enum reg_change_initiator initiator;
enum reg_type type;
char alpha2[3];
} channel_list_changed;
/**
* freq_range - List of frequency ranges
*
* This is used as the data with EVENT_AVOID_FREQUENCIES.
*/
struct wpa_freq_range_list freq_range;
/**
* struct mesh_peer
*
* @peer: Peer address
* @ies: Beacon IEs
* @ie_len: Length of @ies
*
* Notification of new candidate mesh peer.
*/
struct mesh_peer {
const u8 *peer;
const u8 *ies;
size_t ie_len;
} mesh_peer;
/**
* struct acs_selected_channels - Data for EVENT_ACS_CHANNEL_SELECTED
* @pri_channel: Selected primary channel
* @sec_channel: Selected secondary channel
* @vht_seg0_center_ch: VHT mode Segment0 center channel
* @vht_seg1_center_ch: VHT mode Segment1 center channel
* @ch_width: Selected Channel width by driver. Driver may choose to
* change hostapd configured ACS channel width due driver internal
* channel restrictions.
* hw_mode: Selected band (used with hw_mode=any)
*/
struct acs_selected_channels {
u8 pri_channel;
u8 sec_channel;
u8 vht_seg0_center_ch;
u8 vht_seg1_center_ch;
u16 ch_width;
enum hostapd_hw_mode hw_mode;
} acs_selected_channels;
/**
* struct p2p_lo_stop - Reason code for P2P Listen offload stop event
* @reason_code: Reason for stopping offload
* P2P_LO_STOPPED_REASON_COMPLETE: Listen offload finished as
* scheduled.
* P2P_LO_STOPPED_REASON_RECV_STOP_CMD: Host requested offload to
* be stopped.
* P2P_LO_STOPPED_REASON_INVALID_PARAM: Invalid listen offload
* parameters.
* P2P_LO_STOPPED_REASON_NOT_SUPPORTED: Listen offload not
* supported by device.
*/
struct p2p_lo_stop {
enum {
P2P_LO_STOPPED_REASON_COMPLETE = 0,
P2P_LO_STOPPED_REASON_RECV_STOP_CMD,
P2P_LO_STOPPED_REASON_INVALID_PARAM,
P2P_LO_STOPPED_REASON_NOT_SUPPORTED,
} reason_code;
} p2p_lo_stop;
};
/**
* wpa_supplicant_event - Report a driver event for wpa_supplicant
* @ctx: Context pointer (wpa_s); this is the ctx variable registered
* with struct wpa_driver_ops::init()
* @event: event type (defined above)
* @data: possible extra data for the event
*
* Driver wrapper code should call this function whenever an event is received
* from the driver.
*/
void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
union wpa_event_data *data);
/**
* wpa_supplicant_event_global - Report a driver event for wpa_supplicant
* @ctx: Context pointer (wpa_s); this is the ctx variable registered
* with struct wpa_driver_ops::init()
* @event: event type (defined above)
* @data: possible extra data for the event
*
* Same as wpa_supplicant_event(), but we search for the interface in
* wpa_global.
*/
void wpa_supplicant_event_global(void *ctx, enum wpa_event_type event,
union wpa_event_data *data);
/*
* The following inline functions are provided for convenience to simplify
* event indication for some of the common events.
*/
static inline void drv_event_assoc(void *ctx, const u8 *addr, const u8 *ie,
size_t ielen, int reassoc)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.assoc_info.reassoc = reassoc;
event.assoc_info.req_ies = ie;
event.assoc_info.req_ies_len = ielen;
event.assoc_info.addr = addr;
wpa_supplicant_event(ctx, EVENT_ASSOC, &event);
}
static inline void drv_event_disassoc(void *ctx, const u8 *addr)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.disassoc_info.addr = addr;
wpa_supplicant_event(ctx, EVENT_DISASSOC, &event);
}
static inline void drv_event_eapol_rx(void *ctx, const u8 *src, const u8 *data,
size_t data_len)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.eapol_rx.src = src;
event.eapol_rx.data = data;
event.eapol_rx.data_len = data_len;
wpa_supplicant_event(ctx, EVENT_EAPOL_RX, &event);
}
/* driver_common.c */
void wpa_scan_results_free(struct wpa_scan_results *res);
/* Convert wpa_event_type to a string for logging */
const char * event_to_string(enum wpa_event_type event);
/* Convert chan_width to a string for logging and control interfaces */
const char * channel_width_to_string(enum chan_width width);
int ht_supported(const struct hostapd_hw_modes *mode);
int vht_supported(const struct hostapd_hw_modes *mode);
struct wowlan_triggers *
wpa_get_wowlan_triggers(const char *wowlan_triggers,
const struct wpa_driver_capa *capa);
/* Convert driver flag to string */
const char * driver_flag_to_string(u64 flag);
/* NULL terminated array of linked in driver wrappers */
extern const struct wpa_driver_ops *const wpa_drivers[];
/* Available drivers */
#ifdef CONFIG_DRIVER_WEXT
extern const struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */
#endif /* CONFIG_DRIVER_WEXT */
#ifdef CONFIG_DRIVER_NL80211
/* driver_nl80211.c */
extern const struct wpa_driver_ops wpa_driver_nl80211_ops;
#endif /* CONFIG_DRIVER_NL80211 */
#ifdef CONFIG_DRIVER_HOSTAP
extern const struct wpa_driver_ops wpa_driver_hostap_ops; /* driver_hostap.c */
#endif /* CONFIG_DRIVER_HOSTAP */
#ifdef CONFIG_DRIVER_BSD
extern const struct wpa_driver_ops wpa_driver_bsd_ops; /* driver_bsd.c */
#endif /* CONFIG_DRIVER_BSD */
#ifdef CONFIG_DRIVER_OPENBSD
/* driver_openbsd.c */
extern const struct wpa_driver_ops wpa_driver_openbsd_ops;
#endif /* CONFIG_DRIVER_OPENBSD */
#ifdef CONFIG_DRIVER_NDIS
extern struct wpa_driver_ops wpa_driver_ndis_ops; /* driver_ndis.c */
#endif /* CONFIG_DRIVER_NDIS */
#ifdef CONFIG_DRIVER_WIRED
extern const struct wpa_driver_ops wpa_driver_wired_ops; /* driver_wired.c */
#endif /* CONFIG_DRIVER_WIRED */
#ifdef CONFIG_DRIVER_MACSEC_QCA
/* driver_macsec_qca.c */
extern const struct wpa_driver_ops wpa_driver_macsec_qca_ops;
#endif /* CONFIG_DRIVER_MACSEC_QCA */
#ifdef CONFIG_DRIVER_MACSEC_LINUX
/* driver_macsec_linux.c */
extern const struct wpa_driver_ops wpa_driver_macsec_linux_ops;
#endif /* CONFIG_DRIVER_MACSEC_LINUX */
#ifdef CONFIG_DRIVER_ROBOSWITCH
/* driver_roboswitch.c */
extern const struct wpa_driver_ops wpa_driver_roboswitch_ops;
#endif /* CONFIG_DRIVER_ROBOSWITCH */
#ifdef CONFIG_DRIVER_ATHEROS
/* driver_atheros.c */
extern const struct wpa_driver_ops wpa_driver_atheros_ops;
#endif /* CONFIG_DRIVER_ATHEROS */
#ifdef CONFIG_DRIVER_NONE
extern const struct wpa_driver_ops wpa_driver_none_ops; /* driver_none.c */
#endif /* CONFIG_DRIVER_NONE */
#endif /* DRIVER_H */
Reference in a new issue View git blame Copy permalink