Fix style issues in qca-vendor.h
Over time a number of style issues have crept into qca-vendor.h, so fix most of them. There are some identifiers and comments which exceed 80 columns, but these are left as-is for readability. Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
This commit is contained in:
Jeff Johnson
Jouni Malinen
parent
7d66e7c408
commit
6965705bf5
|
|
@ -443,8 +443,8 @@ enum qca_radiotap_vendor_ids {
|
|||
* in enum qca_wlan_vendor_attr_thermal_event.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
|
||||
* test configuration. Attributes for this command are defined in
|
||||
* enum qca_wlan_vendor_attr_wifi_test_config.
|
||||
* test configuration. Attributes for this command are defined in
|
||||
* enum qca_wlan_vendor_attr_wifi_test_config.
|
||||
*
|
||||
* @QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER: This command is used to configure an
|
||||
* RX filter to receive frames from stations that are active on the
|
||||
|
|
@ -614,7 +614,6 @@ enum qca_nl80211_vendor_subcmds {
|
|||
QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170,
|
||||
};
|
||||
|
||||
|
||||
enum qca_wlan_vendor_attr {
|
||||
QCA_WLAN_VENDOR_ATTR_INVALID = 0,
|
||||
/* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
|
||||
|
|
@ -626,7 +625,8 @@ enum qca_wlan_vendor_attr {
|
|||
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
|
||||
QCA_WLAN_VENDOR_ATTR_IFINDEX = 4,
|
||||
/* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
|
||||
* by enum qca_roaming_policy. */
|
||||
* by enum qca_roaming_policy.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
|
||||
QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
|
||||
/* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
|
||||
|
|
@ -714,10 +714,12 @@ enum qca_wlan_vendor_attr {
|
|||
QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25,
|
||||
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
|
||||
* to specify the chain number (unsigned 32 bit value) to inquire
|
||||
* the corresponding antenna RSSI value */
|
||||
* the corresponding antenna RSSI value
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26,
|
||||
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
|
||||
* to report the specific antenna RSSI value (unsigned 32 bit value) */
|
||||
* to report the specific antenna RSSI value (unsigned 32 bit value)
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27,
|
||||
/* Frequency in MHz, various uses. Unsigned 32 bit value */
|
||||
QCA_WLAN_VENDOR_ATTR_FREQ = 28,
|
||||
|
|
@ -784,7 +786,8 @@ enum qca_wlan_vendor_attr {
|
|||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39,
|
||||
/* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command
|
||||
* to report the corresponding antenna index to the chain RSSI value */
|
||||
* to report the corresponding antenna index to the chain RSSI value
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40,
|
||||
|
||||
/* keep last */
|
||||
|
|
@ -792,7 +795,6 @@ enum qca_wlan_vendor_attr {
|
|||
QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
|
||||
enum qca_roaming_policy {
|
||||
QCA_ROAMING_NOT_ALLOWED,
|
||||
QCA_ROAMING_ALLOWED_WITHIN_ESS,
|
||||
|
|
@ -920,7 +922,7 @@ enum qca_wlan_vendor_acs_hw_mode {
|
|||
* @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
|
||||
* band selection based on channel selection results.
|
||||
* @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports
|
||||
* simultaneous off-channel operations.
|
||||
* simultaneous off-channel operations.
|
||||
* @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P
|
||||
* Listen offload; a mechanism where the station's firmware takes care of
|
||||
* responding to incoming Probe Request frames received from other P2P
|
||||
|
|
@ -1278,16 +1280,16 @@ enum qca_vendor_element_id {
|
|||
* @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported
|
||||
* rates to be included
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests
|
||||
* at non CCK rate in 2GHz band
|
||||
* at non CCK rate in 2GHz band
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the
|
||||
* driver for the specific scan request
|
||||
* driver for the specific scan request
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan
|
||||
* request decoded as in enum scan_status
|
||||
* request decoded as in enum scan_status
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation
|
||||
* scan flag is set
|
||||
* scan flag is set
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with
|
||||
* randomisation
|
||||
* randomisation
|
||||
* @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the
|
||||
* specific BSSID to scan for.
|
||||
*/
|
||||
|
|
@ -1311,10 +1313,10 @@ enum qca_wlan_vendor_attr_scan {
|
|||
|
||||
/**
|
||||
* enum scan_status - Specifies the valid values the vendor scan attribute
|
||||
* QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
|
||||
* QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take
|
||||
*
|
||||
* @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with
|
||||
* new scan results
|
||||
* new scan results
|
||||
* @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between
|
||||
*/
|
||||
enum scan_status {
|
||||
|
|
@ -1361,7 +1363,8 @@ enum qca_vendor_attr_txpower_scale {
|
|||
enum qca_vendor_attr_txpower_decr_db {
|
||||
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID,
|
||||
/* 8-bit unsigned value to indicate the reduction of TX power in dB for
|
||||
* a virtual interface. */
|
||||
* a virtual interface.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB,
|
||||
/* keep last */
|
||||
QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST,
|
||||
|
|
@ -1411,29 +1414,37 @@ enum qca_wlan_vendor_attr_config {
|
|||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7,
|
||||
/* 8-bit unsigned value to configure the maximum TX MPDU for
|
||||
* aggregation. */
|
||||
* aggregation.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8,
|
||||
/* 8-bit unsigned value to configure the maximum RX MPDU for
|
||||
* aggregation. */
|
||||
* aggregation.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9,
|
||||
/* 8-bit unsigned value to configure the Non aggregrate/11g sw
|
||||
* retry threshold (0 disable, 31 max). */
|
||||
* retry threshold (0 disable, 31 max).
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10,
|
||||
/* 8-bit unsigned value to configure the aggregrate sw
|
||||
* retry threshold (0 disable, 31 max). */
|
||||
* retry threshold (0 disable, 31 max).
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11,
|
||||
/* 8-bit unsigned value to configure the MGMT frame
|
||||
* retry threshold (0 disable, 31 max). */
|
||||
* retry threshold (0 disable, 31 max).
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12,
|
||||
/* 8-bit unsigned value to configure the CTRL frame
|
||||
* retry threshold (0 disable, 31 max). */
|
||||
* retry threshold (0 disable, 31 max).
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13,
|
||||
/* 8-bit unsigned value to configure the propagation delay for
|
||||
* 2G/5G band (0~63, units in us) */
|
||||
* 2G/5G band (0~63, units in us)
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14,
|
||||
/* Unsigned 32-bit value to configure the number of unicast TX fail
|
||||
* packet count. The peer is disconnected once this threshold is
|
||||
* reached. */
|
||||
* reached.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15,
|
||||
/* Attribute used to set scan default IEs to the driver.
|
||||
*
|
||||
|
|
@ -1444,7 +1455,8 @@ enum qca_wlan_vendor_attr_config {
|
|||
* merged with the IEs received along with scan request coming to the
|
||||
* driver. If a particular IE is present in the scan default IEs but not
|
||||
* present in the scan request, then that IE should be added to the IEs
|
||||
* sent in the Probe Request frames for that scan request. */
|
||||
* sent in the Probe Request frames for that scan request.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16,
|
||||
/* Unsigned 32-bit attribute for generic commands */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17,
|
||||
|
|
@ -1453,41 +1465,50 @@ enum qca_wlan_vendor_attr_config {
|
|||
/* Unsigned 32-bit data attribute for generic command response */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19,
|
||||
/* Unsigned 32-bit length attribute for
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20,
|
||||
/* Unsigned 32-bit flags attribute for
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21,
|
||||
/* Unsigned 32-bit, defining the access policy.
|
||||
* See enum qca_access_policy. Used with
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22,
|
||||
/* Sets the list of full set of IEs for which a specific access policy
|
||||
* has to be applied. Used along with
|
||||
* QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access.
|
||||
* Zero length payload can be used to clear this access constraint. */
|
||||
* Zero length payload can be used to clear this access constraint.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23,
|
||||
/* Unsigned 32-bit, specifies the interface index (netdev) for which the
|
||||
* corresponding configurations are applied. If the interface index is
|
||||
* not specified, the configurations are attributed to the respective
|
||||
* wiphy. */
|
||||
* wiphy.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24,
|
||||
/* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25,
|
||||
/* 8-bit unsigned value to configure the driver and below layers to
|
||||
* ignore the assoc disallowed set by APs while connecting
|
||||
* 1-Ignore, 0-Don't ignore */
|
||||
* 1-Ignore, 0-Don't ignore
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26,
|
||||
/* 32-bit unsigned value to trigger antenna diversity features:
|
||||
* 1-Enable, 0-Disable */
|
||||
* 1-Enable, 0-Disable
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27,
|
||||
/* 32-bit unsigned value to configure specific chain antenna */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28,
|
||||
/* 32-bit unsigned value to trigger cycle selftest
|
||||
* 1-Enable, 0-Disable */
|
||||
* 1-Enable, 0-Disable
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29,
|
||||
/* 32-bit unsigned to configure the cycle time of selftest
|
||||
* the unit is micro-second */
|
||||
* the unit is micro-second
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30,
|
||||
/* 32-bit unsigned value to set reorder timeout for AC_VO */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31,
|
||||
|
|
@ -1511,10 +1532,12 @@ enum qca_wlan_vendor_attr_config {
|
|||
* NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or
|
||||
* 10 MHz channel width, the station will not connect to a BSS using 20
|
||||
* MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to
|
||||
* clear this constraint. */
|
||||
* clear this constraint.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39,
|
||||
/* 32-bit unsigned value to configure the propagation absolute delay
|
||||
* for 2G/5G band (units in us) */
|
||||
* for 2G/5G band (units in us)
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40,
|
||||
/* 32-bit unsigned value to set probe period */
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41,
|
||||
|
|
@ -1582,7 +1605,7 @@ enum qca_wlan_vendor_attr_config {
|
|||
QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51,
|
||||
|
||||
/* 8-bit unsigned value to set the total beacon miss count
|
||||
* This paramater will set the total beacon miss count.
|
||||
* This parameter will set the total beacon miss count.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52,
|
||||
|
||||
|
|
@ -1594,7 +1617,8 @@ enum qca_wlan_vendor_attr_config {
|
|||
|
||||
/* 8-bit unsigned value to configure the driver and below layers to
|
||||
* enable/disable all FILS features.
|
||||
* 0-enable, 1-disable */
|
||||
* 0-enable, 1-disable
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54,
|
||||
|
||||
/* 16-bit unsigned value to configure the level of WLAN latency
|
||||
|
|
@ -1646,7 +1670,8 @@ enum qca_wlan_vendor_attr_sap_config {
|
|||
enum qca_wlan_vendor_attr_sap_conditional_chan_switch {
|
||||
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0,
|
||||
/* Priority based frequency list (an array of u32 values in host byte
|
||||
* order) */
|
||||
* order)
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1,
|
||||
/* Status of the conditional switch (u32).
|
||||
* 0: Success, Non-zero: Failure
|
||||
|
|
@ -2037,7 +2062,7 @@ enum qca_wlan_vendor_attr_loc_capa {
|
|||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver
|
||||
* can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION
|
||||
* will be supported if set.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder
|
||||
* supports immediate (ASAP) response.
|
||||
* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone
|
||||
* AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS.
|
||||
|
|
@ -2600,13 +2625,13 @@ enum qca_wlan_vendor_attr_ll_stats_results {
|
|||
/* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */
|
||||
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40,
|
||||
/* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std
|
||||
* in the units of 0.5 Mbps HT/VHT it would be MCS index */
|
||||
* in the units of 0.5 Mbps HT/VHT it would be MCS index
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41,
|
||||
|
||||
/* Unsigned 32 bit value. Bit rate in units of 100 kbps */
|
||||
QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42,
|
||||
|
||||
|
||||
/* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be
|
||||
* nested within the peer info stats.
|
||||
*/
|
||||
|
|
@ -2776,8 +2801,7 @@ enum qca_wlan_vendor_attr_ll_stats_results {
|
|||
QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1,
|
||||
};
|
||||
|
||||
enum qca_wlan_vendor_attr_ll_stats_type
|
||||
{
|
||||
enum qca_wlan_vendor_attr_ll_stats_type {
|
||||
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0,
|
||||
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1,
|
||||
QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2,
|
||||
|
|
@ -3056,7 +3080,7 @@ enum qca_wlan_vendor_attr_logger_results {
|
|||
|
||||
/* Unsigned 32-bit value; used to indicate the size of memory
|
||||
* dump to be allocated.
|
||||
*/
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2,
|
||||
|
||||
/* keep last */
|
||||
|
|
@ -3800,12 +3824,14 @@ enum qca_wlan_vendor_attr_external_acs_event {
|
|||
/* Flag attribute to indicate if 11ac is offloaded to firmware */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3,
|
||||
/* Flag attribute to indicate if driver provides additional channel
|
||||
* capability as part of scan operation */
|
||||
* capability as part of scan operation
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4,
|
||||
/* Flag attribute to indicate interface status is UP */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5,
|
||||
/* Operating mode (u8) of interface. Takes one of enum nl80211_iftype
|
||||
* values. */
|
||||
* values.
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6,
|
||||
/* Channel width (u8). It takes one of enum nl80211_chan_width values.
|
||||
* This is the upper bound of channel width. ACS logic should try to get
|
||||
|
|
@ -3816,7 +3842,8 @@ enum qca_wlan_vendor_attr_external_acs_event {
|
|||
/* This (u8) will hold values of one of enum nl80211_bands */
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8,
|
||||
/* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode
|
||||
* values */
|
||||
* values
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9,
|
||||
/* Array of (u32) supported frequency list among which ACS should choose
|
||||
* best frequency.
|
||||
|
|
@ -3891,10 +3918,10 @@ enum qca_chip_power_save_failure_reason {
|
|||
/* Indicates if the reason for the failure is due to a protocol
|
||||
* layer/module.
|
||||
*/
|
||||
QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0,
|
||||
QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0,
|
||||
/* Indicates if the reason for the failure is due to a hardware issue.
|
||||
*/
|
||||
QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1,
|
||||
QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1,
|
||||
};
|
||||
|
||||
/**
|
||||
|
|
@ -3903,17 +3930,17 @@ enum qca_chip_power_save_failure_reason {
|
|||
* information leading to the power save failure.
|
||||
*/
|
||||
enum qca_attr_chip_power_save_failure {
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0,
|
||||
/* Reason to cause the power save failure.
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0,
|
||||
/* Reason to cause the power save failure.
|
||||
* These reasons are represented by
|
||||
* enum qca_chip_power_save_failure_reason.
|
||||
*/
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1,
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1,
|
||||
|
||||
/* keep last */
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST,
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX =
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1,
|
||||
/* keep last */
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST,
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX =
|
||||
QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1,
|
||||
};
|
||||
|
||||
/**
|
||||
|
|
@ -4150,7 +4177,8 @@ enum qca_attr_trace_level {
|
|||
enum qca_wlan_vendor_attr_get_he_capabilities {
|
||||
QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0,
|
||||
/* Whether HE capabilities is supported
|
||||
* (u8 attribute: 0 = not supported, 1 = supported) */
|
||||
* (u8 attribute: 0 = not supported, 1 = supported)
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1,
|
||||
/* HE PHY capabilities, array of 3 u32 values */
|
||||
QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2,
|
||||
|
|
@ -4683,8 +4711,7 @@ enum wifi_logger_supported_features {
|
|||
* enum qca_wlan_tdls_caps_features_supported - Values for TDLS get
|
||||
* capabilities features
|
||||
*/
|
||||
enum qca_wlan_tdls_caps_features_supported
|
||||
{
|
||||
enum qca_wlan_tdls_caps_features_supported {
|
||||
WIFI_TDLS_SUPPORT = (1 << (0)),
|
||||
WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)),
|
||||
WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2))
|
||||
|
|
@ -4694,8 +4721,7 @@ enum qca_wlan_tdls_caps_features_supported
|
|||
* enum qca_wlan_vendor_attr_tdls_get_capabilities - Used by the vendor command
|
||||
* QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES.
|
||||
*/
|
||||
enum qca_wlan_vendor_attr_tdls_get_capabilities
|
||||
{
|
||||
enum qca_wlan_vendor_attr_tdls_get_capabilities {
|
||||
QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0,
|
||||
/* Indicates the max concurrent sessions */
|
||||
/* Unsigned 32-bit value */
|
||||
|
|
@ -4716,8 +4742,7 @@ enum qca_wlan_vendor_attr_tdls_get_capabilities
|
|||
* command used as value for the attribute
|
||||
* QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL.
|
||||
*/
|
||||
enum qca_wlan_offloaded_packets_sending_control
|
||||
{
|
||||
enum qca_wlan_offloaded_packets_sending_control {
|
||||
QCA_WLAN_OFFLOADED_PACKETS_SENDING_CONTROL_INVALID = 0,
|
||||
QCA_WLAN_OFFLOADED_PACKETS_SENDING_START,
|
||||
QCA_WLAN_OFFLOADED_PACKETS_SENDING_STOP
|
||||
|
|
@ -4822,7 +4847,8 @@ enum qca_wlan_vendor_attr_ndp_params {
|
|||
/* Array of instance Ids */
|
||||
QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY,
|
||||
/* Unsigned 32-bit value for initiator/responder NDP response code
|
||||
* accept/reject */
|
||||
* accept/reject
|
||||
*/
|
||||
QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE,
|
||||
/* NDI MAC address. An array of 6 Unsigned int8 */
|
||||
QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR,
|
||||
|
|
@ -5198,18 +5224,18 @@ enum qca_wlan_vendor_attr_thermal_event {
|
|||
*
|
||||
* @HE_FRAG_DISABLE: no support for dynamic fragmentation
|
||||
* @HE_FRAG_LEVEL1: support for dynamic fragments that are
|
||||
* contained within an MPDU or S-MPDU, no support for dynamic fragments
|
||||
* within an A-MPDU that is not an S-MPDU.
|
||||
* contained within an MPDU or S-MPDU, no support for dynamic fragments
|
||||
* within an A-MPDU that is not an S-MPDU.
|
||||
* @HE_FRAG_LEVEL2: support for dynamic fragments that are
|
||||
* contained within an MPDU or S-MPDU and support for up to one dynamic
|
||||
* fragment for each MSDU, each A-MSDU if supported by the recipient, and
|
||||
* each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
|
||||
* MPDU or S-MPDU.
|
||||
* contained within an MPDU or S-MPDU and support for up to one dynamic
|
||||
* fragment for each MSDU, each A-MSDU if supported by the recipient, and
|
||||
* each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
|
||||
* MPDU or S-MPDU.
|
||||
* @HE_FRAG_LEVEL3: support for dynamic fragments that are
|
||||
* contained within an MPDU or S-MPDU and support for multiple dynamic
|
||||
* fragments for each MSDU and for each A-MSDU if supported by the
|
||||
* recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
|
||||
* fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
|
||||
* contained within an MPDU or S-MPDU and support for multiple dynamic
|
||||
* fragments for each MSDU and for each A-MSDU if supported by the
|
||||
* recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
|
||||
* fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
|
||||
*/
|
||||
enum he_fragmentation_val {
|
||||
HE_FRAG_DISABLE,
|
||||
|
|
|
|||
Loading…
Reference in a new issue