From 6965705bf537ea1679442ed2ee2a062f45f4cb69 Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Mon, 14 May 2018 12:00:19 -0700 Subject: [PATCH] Fix style issues in qca-vendor.h Over time a number of style issues have crept into qca-vendor.h, so fix most of them. There are some identifiers and comments which exceed 80 columns, but these are left as-is for readability. Signed-off-by: Jouni Malinen --- src/common/qca-vendor.h | 178 +++++++++++++++++++++++----------------- 1 file changed, 102 insertions(+), 76 deletions(-) diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h index 3b49f55cd..19f78b378 100644 --- a/src/common/qca-vendor.h +++ b/src/common/qca-vendor.h @@ -443,8 +443,8 @@ enum qca_radiotap_vendor_ids { * in enum qca_wlan_vendor_attr_thermal_event. * * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi - * test configuration. Attributes for this command are defined in - * enum qca_wlan_vendor_attr_wifi_test_config. + * test configuration. Attributes for this command are defined in + * enum qca_wlan_vendor_attr_wifi_test_config. * * @QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER: This command is used to configure an * RX filter to receive frames from stations that are active on the @@ -614,7 +614,6 @@ enum qca_nl80211_vendor_subcmds { QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170, }; - enum qca_wlan_vendor_attr { QCA_WLAN_VENDOR_ATTR_INVALID = 0, /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ @@ -626,7 +625,8 @@ enum qca_wlan_vendor_attr { /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined - * by enum qca_roaming_policy. */ + * by enum qca_roaming_policy. + */ QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ @@ -714,10 +714,12 @@ enum qca_wlan_vendor_attr { QCA_WLAN_VENDOR_ATTR_AOA_MEAS_RESULT = 25, /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command * to specify the chain number (unsigned 32 bit value) to inquire - * the corresponding antenna RSSI value */ + * the corresponding antenna RSSI value + */ QCA_WLAN_VENDOR_ATTR_CHAIN_INDEX = 26, /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command - * to report the specific antenna RSSI value (unsigned 32 bit value) */ + * to report the specific antenna RSSI value (unsigned 32 bit value) + */ QCA_WLAN_VENDOR_ATTR_CHAIN_RSSI = 27, /* Frequency in MHz, various uses. Unsigned 32 bit value */ QCA_WLAN_VENDOR_ATTR_FREQ = 28, @@ -784,7 +786,8 @@ enum qca_wlan_vendor_attr { */ QCA_WLAN_VENDOR_ATTR_BRP_ANT_NUM_LIMIT = 39, /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command - * to report the corresponding antenna index to the chain RSSI value */ + * to report the corresponding antenna index to the chain RSSI value + */ QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40, /* keep last */ @@ -792,7 +795,6 @@ enum qca_wlan_vendor_attr { QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1, }; - enum qca_roaming_policy { QCA_ROAMING_NOT_ALLOWED, QCA_ROAMING_ALLOWED_WITHIN_ESS, @@ -920,7 +922,7 @@ enum qca_wlan_vendor_acs_hw_mode { * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic * band selection based on channel selection results. * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports - * simultaneous off-channel operations. + * simultaneous off-channel operations. * @QCA_WLAN_VENDOR_FEATURE_P2P_LISTEN_OFFLOAD: Device supports P2P * Listen offload; a mechanism where the station's firmware takes care of * responding to incoming Probe Request frames received from other P2P @@ -1278,16 +1280,16 @@ enum qca_vendor_element_id { * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported * rates to be included * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests - * at non CCK rate in 2GHz band + * at non CCK rate in 2GHz band * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the - * driver for the specific scan request + * driver for the specific scan request * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan - * request decoded as in enum scan_status + * request decoded as in enum scan_status * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation - * scan flag is set + * scan flag is set * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with - * randomisation + * randomisation * @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the * specific BSSID to scan for. */ @@ -1311,10 +1313,10 @@ enum qca_wlan_vendor_attr_scan { /** * enum scan_status - Specifies the valid values the vendor scan attribute - * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take + * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take * * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with - * new scan results + * new scan results * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between */ enum scan_status { @@ -1361,7 +1363,8 @@ enum qca_vendor_attr_txpower_scale { enum qca_vendor_attr_txpower_decr_db { QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, /* 8-bit unsigned value to indicate the reduction of TX power in dB for - * a virtual interface. */ + * a virtual interface. + */ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, /* keep last */ QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, @@ -1411,29 +1414,37 @@ enum qca_wlan_vendor_attr_config { */ QCA_WLAN_VENDOR_ATTR_CONFIG_CHANNEL_AVOIDANCE_IND = 7, /* 8-bit unsigned value to configure the maximum TX MPDU for - * aggregation. */ + * aggregation. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_MPDU_AGGREGATION = 8, /* 8-bit unsigned value to configure the maximum RX MPDU for - * aggregation. */ + * aggregation. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_MPDU_AGGREGATION = 9, /* 8-bit unsigned value to configure the Non aggregrate/11g sw - * retry threshold (0 disable, 31 max). */ + * retry threshold (0 disable, 31 max). + */ QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY = 10, /* 8-bit unsigned value to configure the aggregrate sw - * retry threshold (0 disable, 31 max). */ + * retry threshold (0 disable, 31 max). + */ QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY = 11, /* 8-bit unsigned value to configure the MGMT frame - * retry threshold (0 disable, 31 max). */ + * retry threshold (0 disable, 31 max). + */ QCA_WLAN_VENDOR_ATTR_CONFIG_MGMT_RETRY = 12, /* 8-bit unsigned value to configure the CTRL frame - * retry threshold (0 disable, 31 max). */ + * retry threshold (0 disable, 31 max). + */ QCA_WLAN_VENDOR_ATTR_CONFIG_CTRL_RETRY = 13, /* 8-bit unsigned value to configure the propagation delay for - * 2G/5G band (0~63, units in us) */ + * 2G/5G band (0~63, units in us) + */ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_DELAY = 14, /* Unsigned 32-bit value to configure the number of unicast TX fail * packet count. The peer is disconnected once this threshold is - * reached. */ + * reached. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_TX_FAIL_COUNT = 15, /* Attribute used to set scan default IEs to the driver. * @@ -1444,7 +1455,8 @@ enum qca_wlan_vendor_attr_config { * merged with the IEs received along with scan request coming to the * driver. If a particular IE is present in the scan default IEs but not * present in the scan request, then that IE should be added to the IEs - * sent in the Probe Request frames for that scan request. */ + * sent in the Probe Request frames for that scan request. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_DEFAULT_IES = 16, /* Unsigned 32-bit attribute for generic commands */ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_COMMAND = 17, @@ -1453,41 +1465,50 @@ enum qca_wlan_vendor_attr_config { /* Unsigned 32-bit data attribute for generic command response */ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA = 19, /* Unsigned 32-bit length attribute for - * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */ + * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA + */ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_LENGTH = 20, /* Unsigned 32-bit flags attribute for - * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA */ + * QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_DATA + */ QCA_WLAN_VENDOR_ATTR_CONFIG_GENERIC_FLAGS = 21, /* Unsigned 32-bit, defining the access policy. * See enum qca_access_policy. Used with - * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. */ + * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY = 22, /* Sets the list of full set of IEs for which a specific access policy * has to be applied. Used along with * QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY to control the access. - * Zero length payload can be used to clear this access constraint. */ + * Zero length payload can be used to clear this access constraint. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_ACCESS_POLICY_IE_LIST = 23, /* Unsigned 32-bit, specifies the interface index (netdev) for which the * corresponding configurations are applied. If the interface index is * not specified, the configurations are attributed to the respective - * wiphy. */ + * wiphy. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_IFINDEX = 24, /* 8-bit unsigned value to trigger QPower: 1-Enable, 0-Disable */ QCA_WLAN_VENDOR_ATTR_CONFIG_QPOWER = 25, /* 8-bit unsigned value to configure the driver and below layers to * ignore the assoc disallowed set by APs while connecting - * 1-Ignore, 0-Don't ignore */ + * 1-Ignore, 0-Don't ignore + */ QCA_WLAN_VENDOR_ATTR_CONFIG_IGNORE_ASSOC_DISALLOWED = 26, /* 32-bit unsigned value to trigger antenna diversity features: - * 1-Enable, 0-Disable */ + * 1-Enable, 0-Disable + */ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_ENA = 27, /* 32-bit unsigned value to configure specific chain antenna */ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_CHAIN = 28, /* 32-bit unsigned value to trigger cycle selftest - * 1-Enable, 0-Disable */ + * 1-Enable, 0-Disable + */ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST = 29, /* 32-bit unsigned to configure the cycle time of selftest - * the unit is micro-second */ + * the unit is micro-second + */ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_SELFTEST_INTVL = 30, /* 32-bit unsigned value to set reorder timeout for AC_VO */ QCA_WLAN_VENDOR_ATTR_CONFIG_RX_REORDER_TIMEOUT_VOICE = 31, @@ -1511,10 +1532,12 @@ enum qca_wlan_vendor_attr_config { * NL80211_CHAN_WIDTH_10 means 10 MHz. If set, the device work in 5 or * 10 MHz channel width, the station will not connect to a BSS using 20 * MHz or higher bandwidth. Set to NL80211_CHAN_WIDTH_20_NOHT to - * clear this constraint. */ + * clear this constraint. + */ QCA_WLAN_VENDOR_ATTR_CONFIG_SUB20_CHAN_WIDTH = 39, /* 32-bit unsigned value to configure the propagation absolute delay - * for 2G/5G band (units in us) */ + * for 2G/5G band (units in us) + */ QCA_WLAN_VENDOR_ATTR_CONFIG_PROPAGATION_ABS_DELAY = 40, /* 32-bit unsigned value to set probe period */ QCA_WLAN_VENDOR_ATTR_CONFIG_ANT_DIV_PROBE_PERIOD = 41, @@ -1582,7 +1605,7 @@ enum qca_wlan_vendor_attr_config { QCA_WLAN_VENDOR_ATTR_CONFIG_SCAN_ENABLE = 51, /* 8-bit unsigned value to set the total beacon miss count - * This paramater will set the total beacon miss count. + * This parameter will set the total beacon miss count. */ QCA_WLAN_VENDOR_ATTR_CONFIG_TOTAL_BEACON_MISS_COUNT = 52, @@ -1594,7 +1617,8 @@ enum qca_wlan_vendor_attr_config { /* 8-bit unsigned value to configure the driver and below layers to * enable/disable all FILS features. - * 0-enable, 1-disable */ + * 0-enable, 1-disable + */ QCA_WLAN_VENDOR_ATTR_CONFIG_DISABLE_FILS = 54, /* 16-bit unsigned value to configure the level of WLAN latency @@ -1646,7 +1670,8 @@ enum qca_wlan_vendor_attr_sap_config { enum qca_wlan_vendor_attr_sap_conditional_chan_switch { QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_INVALID = 0, /* Priority based frequency list (an array of u32 values in host byte - * order) */ + * order) + */ QCA_WLAN_VENDOR_ATTR_SAP_CONDITIONAL_CHAN_SWITCH_FREQ_LIST = 1, /* Status of the conditional switch (u32). * 0: Success, Non-zero: Failure @@ -2037,7 +2062,7 @@ enum qca_wlan_vendor_attr_loc_capa { * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_FTM_INITIATOR: Set if driver * can run FTM sessions. QCA_NL80211_VENDOR_SUBCMD_FTM_START_SESSION * will be supported if set. -* @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder + * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_ASAP: Set if FTM responder * supports immediate (ASAP) response. * @QCA_WLAN_VENDOR_ATTR_LOC_CAPA_FLAG_AOA: Set if driver supports standalone * AOA measurement using QCA_NL80211_VENDOR_SUBCMD_AOA_MEAS. @@ -2600,13 +2625,13 @@ enum qca_wlan_vendor_attr_ll_stats_results { /* Unsigned int 8 bit value; 0:20 MHz, 1:40 MHz, 2:80 MHz, 3:160 MHz */ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BW = 40, /* Unsigned int 8 bit value; OFDM/CCK rate code would be as per IEEE Std - * in the units of 0.5 Mbps HT/VHT it would be MCS index */ + * in the units of 0.5 Mbps HT/VHT it would be MCS index + */ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_MCS_INDEX = 41, /* Unsigned 32 bit value. Bit rate in units of 100 kbps */ QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_BIT_RATE = 42, - /* Attributes of type QCA_WLAN_VENDOR_ATTR_LL_STATS_RATE_STAT_* could be * nested within the peer info stats. */ @@ -2776,8 +2801,7 @@ enum qca_wlan_vendor_attr_ll_stats_results { QCA_WLAN_VENDOR_ATTR_LL_STATS_AFTER_LAST - 1, }; -enum qca_wlan_vendor_attr_ll_stats_type -{ +enum qca_wlan_vendor_attr_ll_stats_type { QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_INVALID = 0, QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_RADIO = 1, QCA_NL80211_VENDOR_SUBCMD_LL_STATS_TYPE_IFACE = 2, @@ -3056,7 +3080,7 @@ enum qca_wlan_vendor_attr_logger_results { /* Unsigned 32-bit value; used to indicate the size of memory * dump to be allocated. - */ + */ QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_MEMDUMP_SIZE = 2, /* keep last */ @@ -3800,12 +3824,14 @@ enum qca_wlan_vendor_attr_external_acs_event { /* Flag attribute to indicate if 11ac is offloaded to firmware */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_IS_OFFLOAD_ENABLED = 3, /* Flag attribute to indicate if driver provides additional channel - * capability as part of scan operation */ + * capability as part of scan operation + */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_ADD_CHAN_STATS_SUPPORT = 4, /* Flag attribute to indicate interface status is UP */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_AP_UP = 5, /* Operating mode (u8) of interface. Takes one of enum nl80211_iftype - * values. */ + * values. + */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_SAP_MODE = 6, /* Channel width (u8). It takes one of enum nl80211_chan_width values. * This is the upper bound of channel width. ACS logic should try to get @@ -3816,7 +3842,8 @@ enum qca_wlan_vendor_attr_external_acs_event { /* This (u8) will hold values of one of enum nl80211_bands */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_BAND = 8, /* PHY/HW mode (u8). Takes one of enum qca_wlan_vendor_acs_hw_mode - * values */ + * values + */ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_EVENT_PHY_MODE = 9, /* Array of (u32) supported frequency list among which ACS should choose * best frequency. @@ -3891,10 +3918,10 @@ enum qca_chip_power_save_failure_reason { /* Indicates if the reason for the failure is due to a protocol * layer/module. */ - QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, + QCA_CHIP_POWER_SAVE_FAILURE_REASON_PROTOCOL = 0, /* Indicates if the reason for the failure is due to a hardware issue. */ - QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, + QCA_CHIP_POWER_SAVE_FAILURE_REASON_HARDWARE = 1, }; /** @@ -3903,17 +3930,17 @@ enum qca_chip_power_save_failure_reason { * information leading to the power save failure. */ enum qca_attr_chip_power_save_failure { - QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, - /* Reason to cause the power save failure. + QCA_ATTR_CHIP_POWER_SAVE_FAILURE_INVALID = 0, + /* Reason to cause the power save failure. * These reasons are represented by * enum qca_chip_power_save_failure_reason. */ - QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, + QCA_ATTR_CHIP_POWER_SAVE_FAILURE_REASON = 1, - /* keep last */ - QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, - QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = - QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, + /* keep last */ + QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST, + QCA_ATTR_CHIP_POWER_SAVE_FAILURE_MAX = + QCA_ATTR_CHIP_POWER_SAVE_FAILURE_LAST - 1, }; /** @@ -4150,7 +4177,8 @@ enum qca_attr_trace_level { enum qca_wlan_vendor_attr_get_he_capabilities { QCA_WLAN_VENDOR_ATTR_HE_CAPABILITIES_INVALID = 0, /* Whether HE capabilities is supported - * (u8 attribute: 0 = not supported, 1 = supported) */ + * (u8 attribute: 0 = not supported, 1 = supported) + */ QCA_WLAN_VENDOR_ATTR_HE_SUPPORTED = 1, /* HE PHY capabilities, array of 3 u32 values */ QCA_WLAN_VENDOR_ATTR_PHY_CAPAB = 2, @@ -4683,8 +4711,7 @@ enum wifi_logger_supported_features { * enum qca_wlan_tdls_caps_features_supported - Values for TDLS get * capabilities features */ -enum qca_wlan_tdls_caps_features_supported -{ +enum qca_wlan_tdls_caps_features_supported { WIFI_TDLS_SUPPORT = (1 << (0)), WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT = (1 << (1)), WIFI_TDLS_OFFCHANNEL_SUPPORT = (1 << (2)) @@ -4694,8 +4721,7 @@ enum qca_wlan_tdls_caps_features_supported * enum qca_wlan_vendor_attr_tdls_get_capabilities - Used by the vendor command * QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_CAPABILITIES. */ -enum qca_wlan_vendor_attr_tdls_get_capabilities -{ +enum qca_wlan_vendor_attr_tdls_get_capabilities { QCA_WLAN_VENDOR_ATTR_TDLS_GET_CAPS_INVALID = 0, /* Indicates the max concurrent sessions */ /* Unsigned 32-bit value */ @@ -4716,8 +4742,7 @@ enum qca_wlan_vendor_attr_tdls_get_capabilities * command used as value for the attribute * QCA_WLAN_VENDOR_ATTR_OFFLOADED_PACKETS_SENDING_CONTROL. */ -enum qca_wlan_offloaded_packets_sending_control -{ +enum qca_wlan_offloaded_packets_sending_control { QCA_WLAN_OFFLOADED_PACKETS_SENDING_CONTROL_INVALID = 0, QCA_WLAN_OFFLOADED_PACKETS_SENDING_START, QCA_WLAN_OFFLOADED_PACKETS_SENDING_STOP @@ -4822,7 +4847,8 @@ enum qca_wlan_vendor_attr_ndp_params { /* Array of instance Ids */ QCA_WLAN_VENDOR_ATTR_NDP_INSTANCE_ID_ARRAY, /* Unsigned 32-bit value for initiator/responder NDP response code - * accept/reject */ + * accept/reject + */ QCA_WLAN_VENDOR_ATTR_NDP_RESPONSE_CODE, /* NDI MAC address. An array of 6 Unsigned int8 */ QCA_WLAN_VENDOR_ATTR_NDP_NDI_MAC_ADDR, @@ -5198,18 +5224,18 @@ enum qca_wlan_vendor_attr_thermal_event { * * @HE_FRAG_DISABLE: no support for dynamic fragmentation * @HE_FRAG_LEVEL1: support for dynamic fragments that are - * contained within an MPDU or S-MPDU, no support for dynamic fragments - * within an A-MPDU that is not an S-MPDU. + * contained within an MPDU or S-MPDU, no support for dynamic fragments + * within an A-MPDU that is not an S-MPDU. * @HE_FRAG_LEVEL2: support for dynamic fragments that are - * contained within an MPDU or S-MPDU and support for up to one dynamic - * fragment for each MSDU, each A-MSDU if supported by the recipient, and - * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an - * MPDU or S-MPDU. + * contained within an MPDU or S-MPDU and support for up to one dynamic + * fragment for each MSDU, each A-MSDU if supported by the recipient, and + * each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an + * MPDU or S-MPDU. * @HE_FRAG_LEVEL3: support for dynamic fragments that are - * contained within an MPDU or S-MPDU and support for multiple dynamic - * fragments for each MSDU and for each A-MSDU if supported by the - * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic - * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU. + * contained within an MPDU or S-MPDU and support for multiple dynamic + * fragments for each MSDU and for each A-MSDU if supported by the + * recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic + * fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU. */ enum he_fragmentation_val { HE_FRAG_DISABLE,