194 lines
6.7 KiB
ReStructuredText
194 lines
6.7 KiB
ReStructuredText
.. _GDB usage:
|
|
|
|
GDB usage
|
|
---------
|
|
|
|
QEMU supports working with gdb via gdb's remote-connection facility
|
|
(the "gdbstub"). This allows you to debug guest code in the same
|
|
way that you might with a low-level debug facility like JTAG
|
|
on real hardware. You can stop and start the virtual machine,
|
|
examine state like registers and memory, and set breakpoints and
|
|
watchpoints.
|
|
|
|
In order to use gdb, launch QEMU with the ``-s`` and ``-S`` options.
|
|
The ``-s`` option will make QEMU listen for an incoming connection
|
|
from gdb on TCP port 1234, and ``-S`` will make QEMU not start the
|
|
guest until you tell it to from gdb. (If you want to specify which
|
|
TCP port to use or to use something other than TCP for the gdbstub
|
|
connection, use the ``-gdb dev`` option instead of ``-s``. See
|
|
`Using unix sockets`_ for an example.)
|
|
|
|
.. parsed-literal::
|
|
|
|
|qemu_system| -s -S -kernel bzImage -hda rootdisk.img -append "root=/dev/hda"
|
|
|
|
QEMU will launch but will silently wait for gdb to connect.
|
|
|
|
Then launch gdb on the 'vmlinux' executable::
|
|
|
|
> gdb vmlinux
|
|
|
|
In gdb, connect to QEMU::
|
|
|
|
(gdb) target remote localhost:1234
|
|
|
|
Then you can use gdb normally. For example, type 'c' to launch the
|
|
kernel::
|
|
|
|
(gdb) c
|
|
|
|
Here are some useful tips in order to use gdb on system code:
|
|
|
|
1. Use ``info reg`` to display all the CPU registers.
|
|
|
|
2. Use ``x/10i $eip`` to display the code at the PC position.
|
|
|
|
3. Use ``set architecture i8086`` to dump 16 bit code. Then use
|
|
``x/10i $cs*16+$eip`` to dump the code at the PC position.
|
|
|
|
Debugging multicore machines
|
|
============================
|
|
|
|
GDB's abstraction for debugging targets with multiple possible
|
|
parallel flows of execution is a two layer one: it supports multiple
|
|
"inferiors", each of which can have multiple "threads". When the QEMU
|
|
machine has more than one CPU, QEMU exposes each CPU cluster as a
|
|
separate "inferior", where each CPU within the cluster is a separate
|
|
"thread". Most QEMU machine types have identical CPUs, so there is a
|
|
single cluster which has all the CPUs in it. A few machine types are
|
|
heterogeneous and have multiple clusters: for example the ``sifive_u``
|
|
machine has a cluster with one E51 core and a second cluster with four
|
|
U54 cores. Here the E51 is the only thread in the first inferior, and
|
|
the U54 cores are all threads in the second inferior.
|
|
|
|
When you connect gdb to the gdbstub, it will automatically
|
|
connect to the first inferior; you can display the CPUs in this
|
|
cluster using the gdb ``info thread`` command, and switch between
|
|
them using gdb's usual thread-management commands.
|
|
|
|
For multi-cluster machines, unfortunately gdb does not by default
|
|
handle multiple inferiors, and so you have to explicitly connect
|
|
to them. First, you must connect with the ``extended-remote``
|
|
protocol, not ``remote``::
|
|
|
|
(gdb) target extended-remote localhost:1234
|
|
|
|
Once connected, gdb will have a single inferior, for the
|
|
first cluster. You need to create inferiors for the other
|
|
clusters and attach to them, like this::
|
|
|
|
(gdb) add-inferior
|
|
Added inferior 2
|
|
(gdb) inferior 2
|
|
[Switching to inferior 2 [<null>] (<noexec>)]
|
|
(gdb) attach 2
|
|
Attaching to process 2
|
|
warning: No executable has been specified and target does not support
|
|
determining executable automatically. Try using the "file" command.
|
|
0x00000000 in ?? ()
|
|
|
|
Once you've done this, ``info threads`` will show CPUs in
|
|
all the clusters you have attached to::
|
|
|
|
(gdb) info threads
|
|
Id Target Id Frame
|
|
1.1 Thread 1.1 (cortex-m33-arm-cpu cpu [running]) 0x00000000 in ?? ()
|
|
* 2.1 Thread 2.2 (cortex-m33-arm-cpu cpu [halted ]) 0x00000000 in ?? ()
|
|
|
|
You probably also want to set gdb to ``schedule-multiple`` mode,
|
|
so that when you tell gdb to ``continue`` it resumes all CPUs,
|
|
not just those in the cluster you are currently working on::
|
|
|
|
(gdb) set schedule-multiple on
|
|
|
|
Using unix sockets
|
|
==================
|
|
|
|
An alternate method for connecting gdb to the QEMU gdbstub is to use
|
|
a unix socket (if supported by your operating system). This is useful when
|
|
running several tests in parallel, or if you do not have a known free TCP
|
|
port (e.g. when running automated tests).
|
|
|
|
First create a chardev with the appropriate options, then
|
|
instruct the gdbserver to use that device:
|
|
|
|
.. parsed-literal::
|
|
|
|
|qemu_system| -chardev socket,path=/tmp/gdb-socket,server=on,wait=off,id=gdb0 -gdb chardev:gdb0 -S ...
|
|
|
|
Start gdb as before, but this time connect using the path to
|
|
the socket::
|
|
|
|
(gdb) target remote /tmp/gdb-socket
|
|
|
|
Note that to use a unix socket for the connection you will need
|
|
gdb version 9.0 or newer.
|
|
|
|
Advanced debugging options
|
|
==========================
|
|
|
|
Changing single-stepping behaviour
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The default single stepping behavior is step with the IRQs and timer
|
|
service routines off. It is set this way because when gdb executes a
|
|
single step it expects to advance beyond the current instruction. With
|
|
the IRQs and timer service routines on, a single step might jump into
|
|
the one of the interrupt or exception vectors instead of executing the
|
|
current instruction. This means you may hit the same breakpoint a number
|
|
of times before executing the instruction gdb wants to have executed.
|
|
Because there are rare circumstances where you want to single step into
|
|
an interrupt vector the behavior can be controlled from GDB. There are
|
|
three commands you can query and set the single step behavior:
|
|
|
|
``maintenance packet qqemu.sstepbits``
|
|
This will display the MASK bits used to control the single stepping
|
|
IE:
|
|
|
|
::
|
|
|
|
(gdb) maintenance packet qqemu.sstepbits
|
|
sending: "qqemu.sstepbits"
|
|
received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
|
|
|
|
``maintenance packet qqemu.sstep``
|
|
This will display the current value of the mask used when single
|
|
stepping IE:
|
|
|
|
::
|
|
|
|
(gdb) maintenance packet qqemu.sstep
|
|
sending: "qqemu.sstep"
|
|
received: "0x7"
|
|
|
|
``maintenance packet Qqemu.sstep=HEX_VALUE``
|
|
This will change the single step mask, so if wanted to enable IRQs on
|
|
the single step, but not timers, you would use:
|
|
|
|
::
|
|
|
|
(gdb) maintenance packet Qqemu.sstep=0x5
|
|
sending: "qemu.sstep=0x5"
|
|
received: "OK"
|
|
|
|
Examining physical memory
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Another feature that QEMU gdbstub provides is to toggle the memory GDB
|
|
works with, by default GDB will show the current process memory respecting
|
|
the virtual address translation.
|
|
|
|
If you want to examine/change the physical memory you can set the gdbstub
|
|
to work with the physical memory rather with the virtual one.
|
|
|
|
The memory mode can be checked by sending the following command:
|
|
|
|
``maintenance packet qqemu.PhyMemMode``
|
|
This will return either 0 or 1, 1 indicates you are currently in the
|
|
physical memory mode.
|
|
|
|
``maintenance packet Qqemu.PhyMemMode:1``
|
|
This will change the memory mode to physical memory.
|
|
|
|
``maintenance packet Qqemu.PhyMemMode:0``
|
|
This will change it back to normal memory mode.
|