Projet_SETI_RISC-V/riscv-gnu-toolchain/newlib/winsup/cygwin/mcount.c
2023-03-06 14:48:14 +01:00

179 lines
5.4 KiB
C

/*-
* Copyright (c) 1983, 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if !defined(lint) && !defined(_KERNEL) && defined(LIBC_SCCS)
static char rcsid[] = "$OpenBSD: mcount.c,v 1.6 1997/07/23 21:11:27 kstailey Exp $";
#endif
/*
* This file is taken from Cygwin distribution. Please keep it in sync.
* The differences should be within __MINGW32__ guard.
*/
#ifndef __MINGW32__
#include <sys/param.h>
#endif
#include <sys/types.h>
#include "gmon.h"
#include "winsup.h"
/*
* mcount is called on entry to each function compiled with the profiling
* switch set. _mcount(), which is declared in a machine-dependent way
* with _MCOUNT_DECL, does the actual work and is either inlined into a
* C routine or called by an assembly stub. In any case, this magic is
* taken care of by the MCOUNT definition in <machine/profile.h>.
*
* _mcount updates data structures that represent traversals of the
* program's call graph edges. frompc and selfpc are the return
* address and function address that represents the given call graph edge.
*
* Note: the original BSD code used the same variable (frompcindex) for
* both frompcindex and frompc. Any reasonable, modern compiler will
* perform this optimization.
*/
/* _mcount; may be static, inline, etc */
_MCOUNT_DECL (size_t, size_t);
_MCOUNT_DECL (size_t frompc, size_t selfpc)
{
register u_int16_t *frompcindex;
register struct tostruct *top, *prevtop;
register struct gmonparam *p;
register long toindex;
p = &_gmonparam;
/*
* check that we are profiling
* and that we aren't recursively invoked by this thread
* or entered anew by any other thread.
*/
if (InterlockedCompareExchange (
&p->state, GMON_PROF_BUSY, GMON_PROF_ON) != GMON_PROF_ON)
return;
/*
* check that frompcindex is a reasonable pc value.
* for example: signal catchers get called from the stack,
* not from text space. too bad.
*/
frompc -= p->lowpc;
if (frompc > p->textsize)
goto done;
#if (HASHFRACTION & (HASHFRACTION - 1)) == 0
if (p->hashfraction == HASHFRACTION)
frompcindex =
&p->froms[frompc / (HASHFRACTION * sizeof(*p->froms))];
else
#endif
frompcindex =
&p->froms[frompc / (p->hashfraction * sizeof(*p->froms))];
toindex = *frompcindex;
if (toindex == 0) {
/*
* first time traversing this arc
*/
toindex = ++p->tos[0].link;
if (toindex >= p->tolimit)
/* halt further profiling */
goto overflow;
*frompcindex = toindex;
top = &p->tos[toindex];
top->selfpc = selfpc;
top->count = 1;
top->link = 0;
goto done;
}
top = &p->tos[toindex];
if (top->selfpc == selfpc) {
/*
* arc at front of chain; usual case.
*/
top->count++;
goto done;
}
/*
* have to go looking down chain for it.
* top points to what we are looking at,
* prevtop points to previous top.
* we know it is not at the head of the chain.
*/
for (; /* goto done */; ) {
if (top->link == 0) {
/*
* top is end of the chain and none of the chain
* had top->selfpc == selfpc.
* so we allocate a new tostruct
* and link it to the head of the chain.
*/
toindex = ++p->tos[0].link;
if (toindex >= p->tolimit)
goto overflow;
top = &p->tos[toindex];
top->selfpc = selfpc;
top->count = 1;
top->link = *frompcindex;
*frompcindex = toindex;
goto done;
}
/*
* otherwise, check the next arc on the chain.
*/
prevtop = top;
top = &p->tos[top->link];
if (top->selfpc == selfpc) {
/*
* there it is.
* increment its count
* move it to the head of the chain.
*/
top->count++;
toindex = prevtop->link;
prevtop->link = top->link;
top->link = *frompcindex;
*frompcindex = toindex;
goto done;
}
}
done:
InterlockedExchange (&p->state, GMON_PROF_ON);
return;
overflow:
InterlockedExchange (&p->state, GMON_PROF_ERROR);
return;
}
/*
* Actual definition of mcount function. Defined in <machine/profile.h>,
* which is included by <sys/gmon.h>
*/
MCOUNT