Projet_SETI_RISC-V/riscv-gnu-toolchain/newlib/libgloss/m68k/m68k-semi.txt
2023-03-06 14:48:14 +01:00

214 lines
6.3 KiB
Text

Copyright (c) 2006 CodeSourcery Inc
Copyright (c) 2019 Mentor Graphics
The authors hereby grant permission to use, copy, modify, distribute,
and license this software and its documentation for any purpose, provided
that existing copyright notices are retained in all copies and that this
notice is included verbatim in any distributions. No written agreement,
license, or royalty fee is required for any of the authorized uses.
Modifications to this software may be copyrighted by their authors
and need not follow the licensing terms described here, provided that
the new terms are clearly indicated on the first page of each file where
they apply.
m68k Semihosting Protocol
-------------------------
The instruction used to trigger a semihosting request depends on the
m68k processor variant. On ColdFire, "halt" is used; on other processors
(which don't implement "halt"), "bkpt #0" may be used.
Additionally, a special code sequence is used to distinguish
semihosting requests from other uses of the instruction used to
trigger it. The semihosting instruction is immediately preceded by a
"nop" aligned to a 4-byte boundary, and followed by an invalid sentinel
instruction 0x4e7bf000 ("movec %sp,0"). The debug agent handling the
semihosting request must adjust the program counter to skip over the
sentinel instruction before continuing execution.
Registers d0 and d1 are used to pass parameters to the semihosting call.
d0 contains a request code. d1 is typically a pointer to a 4-longword
parameter block, except for the exit and simulator initialization operations
where it is an immediate integer value.
The result of the operation is returned in the first word of the
parameter block. The second word is used to return an errno value,
encoded per the "Errno Values" section of the RSP documentation in the
GDB User Manual.
The supported d0 request codes are:
#define HOSTED_EXIT 0
Terminate program execution; send a 'W' stop reply to GDB.
d1 contains the exit code, as an immediate integer rather than indirectly
in a parameter block. This semihosting request isn't expected to return.
#define HOSTED_INIT_SIM 1
Do simulator initialization, such as allocation of memory for the
stack and heap. This semihosting request may be triggered from
startup code (crt0.S).
On entry to the semihosting request, d1 contains the default initial
stack pointer as an immediate value, typically the high end of
memory defined by the linker script. If the simulator needs to
dynamically allocate memory for the stack, it should set both d1 and
sp (a7) to the new stack pointer value.
#define HOSTED_OPEN 2
Open file; 'Fopen' GDB fileio request.
d1 points to a parameter block containing:
[0] pointer to filename
[1] filename length
[2] open flags, encoded per the GDB RSP documentation
[3] mode, encoded per the GDB RSP documentation
Return values in parameter block:
[0] file descriptor or -1 on error
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_CLOSE 3
Close file; 'Fclose' GDB fileio request.
d1 points to a parameter block containing:
[0] file descriptor
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_READ 4
Read from file; 'Fread' GDB fileio request.
d1 points to a parameter block containing:
[0] file descriptor
[1] pointer to buffer
[2] buffer size
Return values in parameter block:
[0] number of bytes read
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_WRITE 5
Write to file; 'Fwrite' GDB fileio request.
d1 points to a parameter block containing:
[0] file descriptor
[1] pointer to buffer
[2] byte count
Return values in parameter block:
[0] number of bytes written
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_LSEEK 6
File seek; 'Flseek' GDB fileio request.
d1 points to a parameter block containing:
[0] file descriptor
[1] high word of 64-bit offset
[2] low word of 64-bit offset
[3] seek flag, encoded per the GDB RSP documentation
Return values in parameter block:
[0] high word of 64-bit result
[1] low word of 64-bit result
[2] errno, encoded per the GDB RSP documentation
#define HOSTED_RENAME 7
File rename; 'Frename' GDB fileio request.
d1 points to a parameter block containing:
[0] oldname pointer
[1] oldname length
[2] newname pointer
[3] newname length
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_UNLINK 8
File unlink/delete; 'Funlink' GDB fileio request.
d1 points to a parameter block containing:
[0] filename pointer
[1] filename length
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_STAT 9
File information; 'Fstat' GDB fileio request.
d1 points to a parameter block containing:
[0] filename pointer
[1] filename length
[2] pointer to stat buf, using the structure definition in the GDB RSP
documentation
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_FSTAT 10
File information; 'Ffstat' GDB fileio request.
d1 points to a parameter block containing:
[0] file descriptor
[1] pointer to stat buf, using the structure definition in the GDB RSP
documentation
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_GETTIMEOFDAY 11
Get current time; 'Fgettimeofday' GDB fileio request.
d1 points to a parameter block containing:
[0] timeval pointer, using the structure definition in the GDB RSP
documentation
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_ISATTY 12
Return true if the file descriptor is the GDB console; 'Fisatty' GDB fileio
request.
d1 points to a parameter block containing:
[0] file descriptor
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation
#define HOSTED_SYSTEM 13
System call; 'Fsystem' GDB fileio request.
d1 points to a parameter block containing:
[0] command pointer
[1] command length
Return values in parameter block:
[0] return status
[1] errno, encoded per the GDB RSP documentation