You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
285 lines
12 KiB
Plaintext
285 lines
12 KiB
Plaintext
--altsyncram ACF_BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES="CARE" ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK0" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone V" INDATA_ACLR_A="NONE" LOW_POWER_MODE="AUTO" NUMWORDS_A=8192 NUMWORDS_B=8192 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="UNREGISTERED" RDCONTROL_REG_B="CLOCK0" READ_DURING_WRITE_MODE_MIXED_PORTS="OLD_DATA" WIDTH_A=8 WIDTH_B=8 WIDTHAD_A=13 WIDTHAD_B=13 WRCONTROL_ACLR_A="NONE" address_a address_b clock0 data_a q_b rden_b wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
|
|
--VERSION_BEGIN 22.1 cbx_altera_syncram_nd_impl 2022:10:25:15:32:10:SC cbx_altsyncram 2022:10:25:15:32:10:SC cbx_cycloneii 2022:10:25:15:32:10:SC cbx_lpm_add_sub 2022:10:25:15:32:10:SC cbx_lpm_compare 2022:10:25:15:32:10:SC cbx_lpm_decode 2022:10:25:15:32:10:SC cbx_lpm_mux 2022:10:25:15:32:10:SC cbx_mgl 2022:10:25:15:42:35:SC cbx_nadder 2022:10:25:15:32:10:SC cbx_stratix 2022:10:25:15:32:10:SC cbx_stratixii 2022:10:25:15:32:10:SC cbx_stratixiii 2022:10:25:15:32:10:SC cbx_stratixv 2022:10:25:15:32:10:SC cbx_util_mgl 2022:10:25:15:32:10:SC VERSION_END
|
|
|
|
|
|
-- Copyright (C) 2022 Intel Corporation. All rights reserved.
|
|
-- Your use of Intel Corporation's design tools, logic functions
|
|
-- and other software and tools, and any partner logic
|
|
-- functions, and any output files from any of the foregoing
|
|
-- (including device programming or simulation files), and any
|
|
-- associated documentation or information are expressly subject
|
|
-- to the terms and conditions of the Intel Program License
|
|
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
|
-- the Intel FPGA IP License Agreement, or other applicable license
|
|
-- agreement, including, without limitation, that your use is for
|
|
-- the sole purpose of programming logic devices manufactured by
|
|
-- Intel and sold by Intel or its authorized distributors. Please
|
|
-- refer to the applicable agreement for further details, at
|
|
-- https://fpgasoftware.intel.com/eula.
|
|
|
|
|
|
FUNCTION cyclonev_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
|
|
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, ENABLE_ECC, INIT_FILE, INIT_FILE_LAYOUT, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init10, mem_init11, mem_init12, mem_init13, mem_init14, mem_init15, mem_init16, mem_init17, mem_init18, mem_init19, mem_init2, mem_init20, mem_init21, mem_init22, mem_init23, mem_init24, mem_init25, mem_init26, mem_init27, mem_init28, mem_init29, mem_init3, mem_init30, mem_init31, mem_init32, mem_init33, mem_init34, mem_init35, mem_init36, mem_init37, mem_init38, mem_init39, mem_init4, mem_init40, mem_init41, mem_init42, mem_init43, mem_init44, mem_init45, mem_init46, mem_init47, mem_init48, mem_init49, mem_init5, mem_init50, mem_init51, mem_init52, mem_init53, mem_init54, mem_init55, mem_init56, mem_init57, mem_init58, mem_init59, mem_init6, mem_init60, mem_init61, mem_init62, mem_init63, mem_init64, mem_init65, mem_init66, mem_init67, mem_init68, mem_init69, mem_init7, mem_init70, mem_init71, mem_init8, mem_init9, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, WIDTH_ECCSTATUS = 3)
|
|
RETURNS ( dftout[8..0], eccstatus[WIDTH_ECCSTATUS-1..0], portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
|
|
|
|
--synthesis_resources = M10K 8
|
|
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
|
|
|
|
SUBDESIGN altsyncram_s6q1
|
|
(
|
|
address_a[12..0] : input;
|
|
address_b[12..0] : input;
|
|
clock0 : input;
|
|
data_a[7..0] : input;
|
|
q_b[7..0] : output;
|
|
rden_b : input;
|
|
wren_a : input;
|
|
)
|
|
VARIABLE
|
|
ram_block1a0 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 0,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 0,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a1 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 1,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 1,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a2 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 2,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 2,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a3 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 3,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 3,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a4 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 4,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 4,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a5 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 5,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 5,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a6 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 6,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 6,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
ram_block1a7 : cyclonev_ram_block
|
|
WITH (
|
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
|
CONNECTIVITY_CHECKING = "OFF",
|
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
|
MIXED_PORT_FEED_THROUGH_MODE = "old",
|
|
OPERATION_MODE = "dual_port",
|
|
PORT_A_ADDRESS_WIDTH = 13,
|
|
PORT_A_DATA_WIDTH = 1,
|
|
PORT_A_FIRST_ADDRESS = 0,
|
|
PORT_A_FIRST_BIT_NUMBER = 7,
|
|
PORT_A_LAST_ADDRESS = 8191,
|
|
PORT_A_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_A_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_ADDRESS_CLEAR = "none",
|
|
PORT_B_ADDRESS_CLOCK = "clock0",
|
|
PORT_B_ADDRESS_WIDTH = 13,
|
|
PORT_B_DATA_OUT_CLEAR = "none",
|
|
PORT_B_DATA_WIDTH = 1,
|
|
PORT_B_FIRST_ADDRESS = 0,
|
|
PORT_B_FIRST_BIT_NUMBER = 7,
|
|
PORT_B_LAST_ADDRESS = 8191,
|
|
PORT_B_LOGICAL_RAM_DEPTH = 8192,
|
|
PORT_B_LOGICAL_RAM_WIDTH = 8,
|
|
PORT_B_READ_ENABLE_CLOCK = "clock0",
|
|
RAM_BLOCK_TYPE = "AUTO"
|
|
);
|
|
address_a_wire[12..0] : WIRE;
|
|
address_b_wire[12..0] : WIRE;
|
|
|
|
BEGIN
|
|
ram_block1a[7..0].clk0 = clock0;
|
|
ram_block1a[7..0].portaaddr[] = ( address_a_wire[12..0]);
|
|
ram_block1a[0].portadatain[] = ( data_a[0..0]);
|
|
ram_block1a[1].portadatain[] = ( data_a[1..1]);
|
|
ram_block1a[2].portadatain[] = ( data_a[2..2]);
|
|
ram_block1a[3].portadatain[] = ( data_a[3..3]);
|
|
ram_block1a[4].portadatain[] = ( data_a[4..4]);
|
|
ram_block1a[5].portadatain[] = ( data_a[5..5]);
|
|
ram_block1a[6].portadatain[] = ( data_a[6..6]);
|
|
ram_block1a[7].portadatain[] = ( data_a[7..7]);
|
|
ram_block1a[7..0].portawe = wren_a;
|
|
ram_block1a[7..0].portbaddr[] = ( address_b_wire[12..0]);
|
|
ram_block1a[7..0].portbre = rden_b;
|
|
address_a_wire[] = address_a[];
|
|
address_b_wire[] = address_b[];
|
|
q_b[] = ( ram_block1a[7..0].portbdataout[0..0]);
|
|
END;
|
|
--VALID FILE
|