681 lines
23 KiB
C
681 lines
23 KiB
C
/*
|
|
* QTest testcase for parallel flash with AMD command set
|
|
*
|
|
* Copyright (c) 2019 Stephen Checkoway
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2 or later.
|
|
* See the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "libqtest.h"
|
|
|
|
/*
|
|
* To test the pflash_cfi02 device, we run QEMU with the musicpal machine with
|
|
* a pflash drive. This enables us to test some flash configurations, but not
|
|
* all. In particular, we're limited to a 16-bit wide flash device.
|
|
*/
|
|
|
|
#define MP_FLASH_SIZE_MAX (32 * 1024 * 1024)
|
|
#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX)
|
|
|
|
#define UNIFORM_FLASH_SIZE (8 * 1024 * 1024)
|
|
#define UNIFORM_FLASH_SECTOR_SIZE (64 * 1024)
|
|
|
|
/* Use a newtype to keep flash addresses separate from byte addresses. */
|
|
typedef struct {
|
|
uint64_t addr;
|
|
} faddr;
|
|
#define FLASH_ADDR(x) ((faddr) { .addr = (x) })
|
|
|
|
#define CFI_ADDR FLASH_ADDR(0x55)
|
|
#define UNLOCK0_ADDR FLASH_ADDR(0x555)
|
|
#define UNLOCK1_ADDR FLASH_ADDR(0x2AA)
|
|
|
|
#define CFI_CMD 0x98
|
|
#define UNLOCK0_CMD 0xAA
|
|
#define UNLOCK1_CMD 0x55
|
|
#define SECOND_UNLOCK_CMD 0x80
|
|
#define AUTOSELECT_CMD 0x90
|
|
#define RESET_CMD 0xF0
|
|
#define PROGRAM_CMD 0xA0
|
|
#define SECTOR_ERASE_CMD 0x30
|
|
#define CHIP_ERASE_CMD 0x10
|
|
#define UNLOCK_BYPASS_CMD 0x20
|
|
#define UNLOCK_BYPASS_RESET_CMD 0x00
|
|
#define ERASE_SUSPEND_CMD 0xB0
|
|
#define ERASE_RESUME_CMD SECTOR_ERASE_CMD
|
|
|
|
typedef struct {
|
|
int bank_width;
|
|
|
|
/* Nonuniform block size. */
|
|
int nb_blocs[4];
|
|
int sector_len[4];
|
|
|
|
QTestState *qtest;
|
|
} FlashConfig;
|
|
|
|
static char image_path[] = "/tmp/qtest.XXXXXX";
|
|
|
|
/*
|
|
* The pflash implementation allows some parameters to be unspecified. We want
|
|
* to test those configurations but we also need to know the real values in
|
|
* our testing code. So after we launch qemu, we'll need a new FlashConfig
|
|
* with the correct values filled in.
|
|
*/
|
|
static FlashConfig expand_config_defaults(const FlashConfig *c)
|
|
{
|
|
FlashConfig ret = *c;
|
|
|
|
if (ret.bank_width == 0) {
|
|
ret.bank_width = 2;
|
|
}
|
|
if (ret.nb_blocs[0] == 0 && ret.sector_len[0] == 0) {
|
|
ret.sector_len[0] = UNIFORM_FLASH_SECTOR_SIZE;
|
|
ret.nb_blocs[0] = UNIFORM_FLASH_SIZE / UNIFORM_FLASH_SECTOR_SIZE;
|
|
}
|
|
|
|
/* XXX: Limitations of test harness. */
|
|
assert(ret.bank_width == 2);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Return a bit mask suitable for extracting the least significant
|
|
* status/query response from an interleaved response.
|
|
*/
|
|
static inline uint64_t device_mask(const FlashConfig *c)
|
|
{
|
|
return (uint64_t)-1;
|
|
}
|
|
|
|
/*
|
|
* Return a bit mask exactly as long as the bank_width.
|
|
*/
|
|
static inline uint64_t bank_mask(const FlashConfig *c)
|
|
{
|
|
if (c->bank_width == 8) {
|
|
return (uint64_t)-1;
|
|
}
|
|
return (1ULL << (c->bank_width * 8)) - 1ULL;
|
|
}
|
|
|
|
static inline void flash_write(const FlashConfig *c, uint64_t byte_addr,
|
|
uint64_t data)
|
|
{
|
|
/* Sanity check our tests. */
|
|
assert((data & ~bank_mask(c)) == 0);
|
|
uint64_t addr = BASE_ADDR + byte_addr;
|
|
switch (c->bank_width) {
|
|
case 1:
|
|
qtest_writeb(c->qtest, addr, data);
|
|
break;
|
|
case 2:
|
|
qtest_writew(c->qtest, addr, data);
|
|
break;
|
|
case 4:
|
|
qtest_writel(c->qtest, addr, data);
|
|
break;
|
|
case 8:
|
|
qtest_writeq(c->qtest, addr, data);
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
static inline uint64_t flash_read(const FlashConfig *c, uint64_t byte_addr)
|
|
{
|
|
uint64_t addr = BASE_ADDR + byte_addr;
|
|
switch (c->bank_width) {
|
|
case 1:
|
|
return qtest_readb(c->qtest, addr);
|
|
case 2:
|
|
return qtest_readw(c->qtest, addr);
|
|
case 4:
|
|
return qtest_readl(c->qtest, addr);
|
|
case 8:
|
|
return qtest_readq(c->qtest, addr);
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Convert a flash address expressed in the maximum width of the device as a
|
|
* byte address.
|
|
*/
|
|
static inline uint64_t as_byte_addr(const FlashConfig *c, faddr flash_addr)
|
|
{
|
|
/*
|
|
* Command addresses are always given as addresses in the maximum
|
|
* supported bus size for the flash chip. So an x8/x16 chip in x8 mode
|
|
* uses addresses 0xAAA and 0x555 to unlock because the least significant
|
|
* bit is ignored. (0x555 rather than 0x554 is traditional.)
|
|
*
|
|
* In general we need to multiply by the maximum device width.
|
|
*/
|
|
return flash_addr.addr * c->bank_width;
|
|
}
|
|
|
|
/*
|
|
* Return the command value or expected status replicated across all devices.
|
|
*/
|
|
static inline uint64_t replicate(const FlashConfig *c, uint64_t data)
|
|
{
|
|
/* Sanity check our tests. */
|
|
assert((data & ~device_mask(c)) == 0);
|
|
return data;
|
|
}
|
|
|
|
static inline void flash_cmd(const FlashConfig *c, faddr cmd_addr,
|
|
uint8_t cmd)
|
|
{
|
|
flash_write(c, as_byte_addr(c, cmd_addr), replicate(c, cmd));
|
|
}
|
|
|
|
static inline uint64_t flash_query(const FlashConfig *c, faddr query_addr)
|
|
{
|
|
return flash_read(c, as_byte_addr(c, query_addr));
|
|
}
|
|
|
|
static inline uint64_t flash_query_1(const FlashConfig *c, faddr query_addr)
|
|
{
|
|
return flash_query(c, query_addr) & device_mask(c);
|
|
}
|
|
|
|
static void unlock(const FlashConfig *c)
|
|
{
|
|
flash_cmd(c, UNLOCK0_ADDR, UNLOCK0_CMD);
|
|
flash_cmd(c, UNLOCK1_ADDR, UNLOCK1_CMD);
|
|
}
|
|
|
|
static void reset(const FlashConfig *c)
|
|
{
|
|
flash_cmd(c, FLASH_ADDR(0), RESET_CMD);
|
|
}
|
|
|
|
static void sector_erase(const FlashConfig *c, uint64_t byte_addr)
|
|
{
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
|
|
unlock(c);
|
|
flash_write(c, byte_addr, replicate(c, SECTOR_ERASE_CMD));
|
|
}
|
|
|
|
static void wait_for_completion(const FlashConfig *c, uint64_t byte_addr)
|
|
{
|
|
/* If DQ6 is toggling, step the clock and ensure the toggle stops. */
|
|
const uint64_t dq6 = replicate(c, 0x40);
|
|
if ((flash_read(c, byte_addr) & dq6) ^ (flash_read(c, byte_addr) & dq6)) {
|
|
/* Wait for erase or program to finish. */
|
|
qtest_clock_step_next(c->qtest);
|
|
/* Ensure that DQ6 has stopped toggling. */
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
|
|
}
|
|
}
|
|
|
|
static void bypass_program(const FlashConfig *c, uint64_t byte_addr,
|
|
uint16_t data)
|
|
{
|
|
flash_cmd(c, UNLOCK0_ADDR, PROGRAM_CMD);
|
|
flash_write(c, byte_addr, data);
|
|
/*
|
|
* Data isn't valid until DQ6 stops toggling. We don't model this as
|
|
* writes are immediate, but if this changes in the future, we can wait
|
|
* until the program is complete.
|
|
*/
|
|
wait_for_completion(c, byte_addr);
|
|
}
|
|
|
|
static void program(const FlashConfig *c, uint64_t byte_addr, uint16_t data)
|
|
{
|
|
unlock(c);
|
|
bypass_program(c, byte_addr, data);
|
|
}
|
|
|
|
static void chip_erase(const FlashConfig *c)
|
|
{
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, CHIP_ERASE_CMD);
|
|
}
|
|
|
|
static void erase_suspend(const FlashConfig *c)
|
|
{
|
|
flash_cmd(c, FLASH_ADDR(0), ERASE_SUSPEND_CMD);
|
|
}
|
|
|
|
static void erase_resume(const FlashConfig *c)
|
|
{
|
|
flash_cmd(c, FLASH_ADDR(0), ERASE_RESUME_CMD);
|
|
}
|
|
|
|
/*
|
|
* Test flash commands with a variety of device geometry.
|
|
*/
|
|
static void test_geometry(const void *opaque)
|
|
{
|
|
const FlashConfig *config = opaque;
|
|
QTestState *qtest;
|
|
qtest = qtest_initf("-M musicpal"
|
|
" -drive if=pflash,file=%s,format=raw,copy-on-read=on"
|
|
/* Device geometry properties. */
|
|
" -global driver=cfi.pflash02,"
|
|
"property=num-blocks0,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=sector-length0,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=num-blocks1,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=sector-length1,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=num-blocks2,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=sector-length2,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=num-blocks3,value=%d"
|
|
" -global driver=cfi.pflash02,"
|
|
"property=sector-length3,value=%d",
|
|
image_path,
|
|
config->nb_blocs[0],
|
|
config->sector_len[0],
|
|
config->nb_blocs[1],
|
|
config->sector_len[1],
|
|
config->nb_blocs[2],
|
|
config->sector_len[2],
|
|
config->nb_blocs[3],
|
|
config->sector_len[3]);
|
|
FlashConfig explicit_config = expand_config_defaults(config);
|
|
explicit_config.qtest = qtest;
|
|
const FlashConfig *c = &explicit_config;
|
|
|
|
/* Check the IDs. */
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
|
|
if (c->bank_width >= 2) {
|
|
/*
|
|
* XXX: The ID returned by the musicpal flash chip is 16 bits which
|
|
* wouldn't happen with an 8-bit device. It would probably be best to
|
|
* prohibit addresses larger than the device width in pflash_cfi02.c,
|
|
* but then we couldn't test smaller device widths at all.
|
|
*/
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(1)), ==,
|
|
replicate(c, 0x236D));
|
|
}
|
|
reset(c);
|
|
|
|
/* Check the erase blocks. */
|
|
flash_cmd(c, CFI_ADDR, CFI_CMD);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
|
|
|
|
/* Num erase regions. */
|
|
int nb_erase_regions = flash_query_1(c, FLASH_ADDR(0x2C));
|
|
g_assert_cmphex(nb_erase_regions, ==,
|
|
!!c->nb_blocs[0] + !!c->nb_blocs[1] + !!c->nb_blocs[2] +
|
|
!!c->nb_blocs[3]);
|
|
|
|
/* Check device length. */
|
|
uint32_t device_len = 1 << flash_query_1(c, FLASH_ADDR(0x27));
|
|
g_assert_cmphex(device_len, ==, UNIFORM_FLASH_SIZE);
|
|
|
|
/* Check that erase suspend to read/write is supported. */
|
|
uint16_t pri = flash_query_1(c, FLASH_ADDR(0x15)) +
|
|
(flash_query_1(c, FLASH_ADDR(0x16)) << 8);
|
|
g_assert_cmpint(pri, >=, 0x2D + 4 * nb_erase_regions);
|
|
g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 0)), ==, replicate(c, 'P'));
|
|
g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 1)), ==, replicate(c, 'R'));
|
|
g_assert_cmpint(flash_query(c, FLASH_ADDR(pri + 2)), ==, replicate(c, 'I'));
|
|
g_assert_cmpint(flash_query_1(c, FLASH_ADDR(pri + 6)), ==, 2); /* R/W */
|
|
reset(c);
|
|
|
|
const uint64_t dq7 = replicate(c, 0x80);
|
|
const uint64_t dq6 = replicate(c, 0x40);
|
|
const uint64_t dq3 = replicate(c, 0x08);
|
|
const uint64_t dq2 = replicate(c, 0x04);
|
|
|
|
uint64_t byte_addr = 0;
|
|
for (int region = 0; region < nb_erase_regions; ++region) {
|
|
uint64_t base = 0x2D + 4 * region;
|
|
flash_cmd(c, CFI_ADDR, CFI_CMD);
|
|
uint32_t nb_sectors = flash_query_1(c, FLASH_ADDR(base + 0)) +
|
|
(flash_query_1(c, FLASH_ADDR(base + 1)) << 8) + 1;
|
|
uint32_t sector_len = (flash_query_1(c, FLASH_ADDR(base + 2)) << 8) +
|
|
(flash_query_1(c, FLASH_ADDR(base + 3)) << 16);
|
|
g_assert_cmphex(nb_sectors, ==, c->nb_blocs[region]);
|
|
g_assert_cmphex(sector_len, ==, c->sector_len[region]);
|
|
reset(c);
|
|
|
|
/* Erase and program sector. */
|
|
for (uint32_t i = 0; i < nb_sectors; ++i) {
|
|
sector_erase(c, byte_addr);
|
|
|
|
/* Check that DQ3 is 0. */
|
|
g_assert_cmphex(flash_read(c, byte_addr) & dq3, ==, 0);
|
|
qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
|
|
|
|
/* Check that DQ3 is 1. */
|
|
uint64_t status0 = flash_read(c, byte_addr);
|
|
g_assert_cmphex(status0 & dq3, ==, dq3);
|
|
|
|
/* DQ7 is 0 during an erase. */
|
|
g_assert_cmphex(status0 & dq7, ==, 0);
|
|
uint64_t status1 = flash_read(c, byte_addr);
|
|
|
|
/* DQ6 toggles during an erase. */
|
|
g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
|
|
|
|
/* Wait for erase to complete. */
|
|
wait_for_completion(c, byte_addr);
|
|
|
|
/* Ensure DQ6 has stopped toggling. */
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==,
|
|
flash_read(c, byte_addr));
|
|
|
|
/* Now the data should be valid. */
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
|
|
|
|
/* Program a bit pattern. */
|
|
program(c, byte_addr, 0x55);
|
|
g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55);
|
|
program(c, byte_addr, 0xA5);
|
|
g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05);
|
|
byte_addr += sector_len;
|
|
}
|
|
}
|
|
|
|
/* Erase the chip. */
|
|
chip_erase(c);
|
|
/* Read toggle. */
|
|
uint64_t status0 = flash_read(c, 0);
|
|
/* DQ7 is 0 during an erase. */
|
|
g_assert_cmphex(status0 & dq7, ==, 0);
|
|
uint64_t status1 = flash_read(c, 0);
|
|
/* DQ6 toggles during an erase. */
|
|
g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);
|
|
/* Wait for erase to complete. */
|
|
qtest_clock_step_next(c->qtest);
|
|
/* Ensure DQ6 has stopped toggling. */
|
|
g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));
|
|
/* Now the data should be valid. */
|
|
|
|
for (int region = 0; region < nb_erase_regions; ++region) {
|
|
for (uint32_t i = 0; i < c->nb_blocs[region]; ++i) {
|
|
uint64_t byte_addr = (uint64_t)i * c->sector_len[region];
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
|
|
}
|
|
}
|
|
|
|
/* Unlock bypass */
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, UNLOCK_BYPASS_CMD);
|
|
bypass_program(c, 0 * c->bank_width, 0x01);
|
|
bypass_program(c, 1 * c->bank_width, 0x23);
|
|
bypass_program(c, 2 * c->bank_width, 0x45);
|
|
/*
|
|
* Test that bypass programming, unlike normal programming can use any
|
|
* address for the PROGRAM_CMD.
|
|
*/
|
|
flash_cmd(c, FLASH_ADDR(3 * c->bank_width), PROGRAM_CMD);
|
|
flash_write(c, 3 * c->bank_width, 0x67);
|
|
wait_for_completion(c, 3 * c->bank_width);
|
|
flash_cmd(c, FLASH_ADDR(0), UNLOCK_BYPASS_RESET_CMD);
|
|
bypass_program(c, 4 * c->bank_width, 0x89); /* Should fail. */
|
|
g_assert_cmphex(flash_read(c, 0 * c->bank_width), ==, 0x01);
|
|
g_assert_cmphex(flash_read(c, 1 * c->bank_width), ==, 0x23);
|
|
g_assert_cmphex(flash_read(c, 2 * c->bank_width), ==, 0x45);
|
|
g_assert_cmphex(flash_read(c, 3 * c->bank_width), ==, 0x67);
|
|
g_assert_cmphex(flash_read(c, 4 * c->bank_width), ==, bank_mask(c));
|
|
|
|
/* Test ignored high order bits of address. */
|
|
flash_cmd(c, FLASH_ADDR(0x5555), UNLOCK0_CMD);
|
|
flash_cmd(c, FLASH_ADDR(0x2AAA), UNLOCK1_CMD);
|
|
flash_cmd(c, FLASH_ADDR(0x5555), AUTOSELECT_CMD);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
|
|
reset(c);
|
|
|
|
/*
|
|
* Program a word on each sector, erase one or two sectors per region, and
|
|
* verify that all of those, and only those, are erased.
|
|
*/
|
|
byte_addr = 0;
|
|
for (int region = 0; region < nb_erase_regions; ++region) {
|
|
for (int i = 0; i < config->nb_blocs[region]; ++i) {
|
|
program(c, byte_addr, 0);
|
|
byte_addr += config->sector_len[region];
|
|
}
|
|
}
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, SECOND_UNLOCK_CMD);
|
|
unlock(c);
|
|
byte_addr = 0;
|
|
const uint64_t erase_cmd = replicate(c, SECTOR_ERASE_CMD);
|
|
for (int region = 0; region < nb_erase_regions; ++region) {
|
|
flash_write(c, byte_addr, erase_cmd);
|
|
if (c->nb_blocs[region] > 1) {
|
|
flash_write(c, byte_addr + c->sector_len[region], erase_cmd);
|
|
}
|
|
byte_addr += c->sector_len[region] * c->nb_blocs[region];
|
|
}
|
|
|
|
qtest_clock_step_next(c->qtest); /* Step over the 50 us timeout. */
|
|
wait_for_completion(c, 0);
|
|
byte_addr = 0;
|
|
for (int region = 0; region < nb_erase_regions; ++region) {
|
|
for (int i = 0; i < config->nb_blocs[region]; ++i) {
|
|
if (i < 2) {
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));
|
|
} else {
|
|
g_assert_cmphex(flash_read(c, byte_addr), ==, 0);
|
|
}
|
|
byte_addr += config->sector_len[region];
|
|
}
|
|
}
|
|
|
|
/* Test erase suspend/resume during erase timeout. */
|
|
sector_erase(c, 0);
|
|
/*
|
|
* Check that DQ 3 is 0 and DQ6 and DQ2 are toggling in the sector being
|
|
* erased as well as in a sector not being erased.
|
|
*/
|
|
byte_addr = c->sector_len[0];
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq3, ==, 0);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
status0 = flash_read(c, byte_addr);
|
|
status1 = flash_read(c, byte_addr);
|
|
g_assert_cmpint(status0 & dq3, ==, 0);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
|
|
/*
|
|
* Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
|
|
* an erase suspended sector but that neither toggle (we should be
|
|
* getting data) in a sector not being erased.
|
|
*/
|
|
erase_suspend(c);
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
|
|
|
|
/* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
|
|
erase_resume(c);
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
status0 = flash_read(c, byte_addr);
|
|
status1 = flash_read(c, byte_addr);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
wait_for_completion(c, 0);
|
|
|
|
/* Repeat this process but this time suspend after the timeout. */
|
|
sector_erase(c, 0);
|
|
qtest_clock_step_next(c->qtest);
|
|
/*
|
|
* Check that DQ 3 is 1 and DQ6 and DQ2 are toggling in the sector being
|
|
* erased as well as in a sector not being erased.
|
|
*/
|
|
byte_addr = c->sector_len[0];
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
status0 = flash_read(c, byte_addr);
|
|
status1 = flash_read(c, byte_addr);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
|
|
/*
|
|
* Check that after suspending, DQ6 does not toggle but DQ2 does toggle in
|
|
* an erase suspended sector but that neither toggle (we should be
|
|
* getting data) in a sector not being erased.
|
|
*/
|
|
erase_suspend(c);
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq6, ==, status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
g_assert_cmpint(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));
|
|
|
|
/* Check that after resuming, DQ3 is 1 and DQ6 and DQ2 toggle. */
|
|
erase_resume(c);
|
|
status0 = flash_read(c, 0);
|
|
status1 = flash_read(c, 0);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
status0 = flash_read(c, byte_addr);
|
|
status1 = flash_read(c, byte_addr);
|
|
g_assert_cmpint(status0 & dq3, ==, dq3);
|
|
g_assert_cmpint(status0 & dq6, ==, ~status1 & dq6);
|
|
g_assert_cmpint(status0 & dq2, ==, ~status1 & dq2);
|
|
wait_for_completion(c, 0);
|
|
|
|
qtest_quit(qtest);
|
|
}
|
|
|
|
/*
|
|
* Test that
|
|
* 1. enter autoselect mode;
|
|
* 2. enter CFI mode; and then
|
|
* 3. exit CFI mode
|
|
* leaves the flash device in autoselect mode.
|
|
*/
|
|
static void test_cfi_in_autoselect(const void *opaque)
|
|
{
|
|
const FlashConfig *config = opaque;
|
|
QTestState *qtest;
|
|
qtest = qtest_initf("-M musicpal"
|
|
" -drive if=pflash,file=%s,format=raw,copy-on-read=on",
|
|
image_path);
|
|
FlashConfig explicit_config = expand_config_defaults(config);
|
|
explicit_config.qtest = qtest;
|
|
const FlashConfig *c = &explicit_config;
|
|
|
|
/* 1. Enter autoselect. */
|
|
unlock(c);
|
|
flash_cmd(c, UNLOCK0_ADDR, AUTOSELECT_CMD);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
|
|
|
|
/* 2. Enter CFI. */
|
|
flash_cmd(c, CFI_ADDR, CFI_CMD);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q'));
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R'));
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));
|
|
|
|
/* 3. Exit CFI. */
|
|
reset(c);
|
|
g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF));
|
|
|
|
qtest_quit(qtest);
|
|
}
|
|
|
|
static void cleanup(void *opaque)
|
|
{
|
|
unlink(image_path);
|
|
}
|
|
|
|
/*
|
|
* XXX: Tests are limited to bank_width = 2 for now because that's what
|
|
* hw/arm/musicpal.c has.
|
|
*/
|
|
static const FlashConfig configuration[] = {
|
|
/* One x16 device. */
|
|
{
|
|
.bank_width = 2,
|
|
},
|
|
/* Nonuniform sectors (top boot). */
|
|
{
|
|
.bank_width = 2,
|
|
.nb_blocs = { 127, 1, 2, 1 },
|
|
.sector_len = { 0x10000, 0x08000, 0x02000, 0x04000 },
|
|
},
|
|
/* Nonuniform sectors (bottom boot). */
|
|
{
|
|
.bank_width = 2,
|
|
.nb_blocs = { 1, 2, 1, 127 },
|
|
.sector_len = { 0x04000, 0x02000, 0x08000, 0x10000 },
|
|
},
|
|
};
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
int fd = mkstemp(image_path);
|
|
if (fd == -1) {
|
|
g_printerr("Failed to create temporary file %s: %s\n", image_path,
|
|
strerror(errno));
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
if (ftruncate(fd, UNIFORM_FLASH_SIZE) < 0) {
|
|
int error_code = errno;
|
|
close(fd);
|
|
unlink(image_path);
|
|
g_printerr("Failed to truncate file %s to %u MB: %s\n", image_path,
|
|
UNIFORM_FLASH_SIZE, strerror(error_code));
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
close(fd);
|
|
|
|
qtest_add_abrt_handler(cleanup, NULL);
|
|
g_test_init(&argc, &argv, NULL);
|
|
|
|
size_t nb_configurations = sizeof configuration / sizeof configuration[0];
|
|
for (size_t i = 0; i < nb_configurations; ++i) {
|
|
const FlashConfig *config = &configuration[i];
|
|
char *path = g_strdup_printf("pflash-cfi02"
|
|
"/geometry/%dx%x-%dx%x-%dx%x-%dx%x"
|
|
"/%d",
|
|
config->nb_blocs[0],
|
|
config->sector_len[0],
|
|
config->nb_blocs[1],
|
|
config->sector_len[1],
|
|
config->nb_blocs[2],
|
|
config->sector_len[2],
|
|
config->nb_blocs[3],
|
|
config->sector_len[3],
|
|
config->bank_width);
|
|
qtest_add_data_func(path, config, test_geometry);
|
|
g_free(path);
|
|
}
|
|
|
|
qtest_add_data_func("pflash-cfi02/cfi-in-autoselect", &configuration[0],
|
|
test_cfi_in_autoselect);
|
|
int result = g_test_run();
|
|
cleanup(NULL);
|
|
return result;
|
|
}
|